And that's the last time AMD sends anything special to Linus.

@thomasguenoun572

5 жыл бұрын

doesn't t even deserve a number @jack chester

@bigcazza5260

5 жыл бұрын

not if they like the diy community it wont be

@Gatapotata

5 жыл бұрын

To be fair, isn't this what companies expect from Linus? I mean, they sent it to him, dafuq they think was gonna happen?

@John-np2bf

5 жыл бұрын

I was thinking the same thing. So now he's destroyed the award just to put the cover on a real chip which will never be seen. And all at the risk of losing the processor. I guess you get to do things like that when you're a reviewer and you have all the coolest tech lying around. Personally would still have not done that.

@darrinfyfe7728

5 жыл бұрын

Kind of disrespectful. It was meant as an ornament.

Thank God that Linus isn't working in a nuclear power plant..

@whiteknight7wayne493

5 жыл бұрын

if he puts on 50 lb u cud make him the next Homer Simpson in the nuke plant

@yourposer

4 жыл бұрын

He would have to move to Springfield

@omanuelo9919

4 жыл бұрын

Soooo in today's video we will overclock the reactor.

@rockytom5889

4 жыл бұрын

@@omanuelo9919 The boys in Chernobyl tried to overclock theirs,but dropped the rods way too late...

@makunouchiippo2542

4 жыл бұрын

@@omanuelo9919 Things gone wrong, pression Droped , gone wild , gone sexual

Linus: *Delids the new Threadripper* AMD: This is why we don't give out nice things

@TwenOalley

5 жыл бұрын

I'm sure AMD is thrilled to have as much coverage as possible, that's the point of sending things to reviewers in the first place.

@TheBukaj150

4 жыл бұрын

This is why AMD took so long to make new updated cpu... They were just trying to decide if they wanna see people cringy things to it

@TheBukaj150

4 жыл бұрын

Possibly destroying the cpu

So... take off vanity IHS cause it's cool to see... put it on working CPU, then cover it with thermal paste and a heat sink... so... no one can now see the vanity IHS... smooth... smooth...

@sultanmehmoodghaznavi6312

5 жыл бұрын

hahahahahahahaha I was exactly thinking the same!! why he would do that?

@YouKnowMeDuh

5 жыл бұрын

It was a nice looking vanity, for as long as we could see it.

@Chadok89

5 жыл бұрын

once the test done , he can remove it, clean it, and have the only working one.

@John-np2bf

5 жыл бұрын

That was my immediate reaction. So he destroyed the award to just to put a "phony" lid on a legit chip that no one will ever see or know is there unless you tell them or they see this. And then, it's all just pointless and imo hardware abuse because he's spoiled.

@Chadok89

5 жыл бұрын

@@John-np2bf at least 1.4M people knows...

Amd: hey, here. We've got a present for you. It's a... Linus: cool, free cpu. Does it work? Amd: no, actu... Linus: ah, don't worry. I'll delid it and put it in a working one Amd: no wai... Linus: it wooooorks

@thezig2078

5 жыл бұрын

Hahaha

@xYottabyte

5 жыл бұрын

I imagined this with Linus's face in the "Why does Linus pirate windows?" thumbnail.

@Hiddenus1

4 жыл бұрын

@@xYottabyte I literally had this video in suggested right next to your comment so I don't even have to imagine how perfectly it fits. :D

@Ramurod

4 жыл бұрын

It would have been so much easier to just put the dummy with special heatspreader aside, take the working CPU and use some powerful laser engraver- or how the heck this kind of writing on the heatspreader is done- and engrave it yourself. After that you would have had even 2- the original and unharmed dummy from AMD, that you can put on your desk and then you would have another self-engraved and totally functional one, maybe for your personal rig. The way Linus chose resulted in a totally destroyed dummy and another CPU, thats heated way above its temperature-limit in an pizza-oven, violently scratched with some blade, sanded down with some diamond-sandpaper-liquid and in the end glued together with some mysterious red goo. But at least it was interesting to watch :D Poor AMD, its like you get your kids some very special gift for christmas and after opening their present they instantly start smashing it to pieces with a baseball bat and glue its pieces randomly back together

@elcouz

4 жыл бұрын

@@Ramurod mysterious red goo... it's RTV sealant aka gasket maker

'I wonder who got Number 1...' 'Someone who won't drop it' oof...

@AbrarKhan-kb9nn

5 жыл бұрын

The CEO of AMD got it

@camilosaavedralopez3757

3 жыл бұрын

@@AbrarKhan-kb9nn I mean he's not wrong

@the-lag-gamerita5446

3 жыл бұрын

@@AbrarKhan-kb9nn r/tecnicallythetruth

I watched this whole video and they never did a close up shot on the engraving. Why?

@samuelgomola9097

4 жыл бұрын

You should see at 7:58

LTT: the wrong tool for every job

I hope to see that dust one year benchmark results video very soon.

@EasternSkvngr

6 жыл бұрын

It should actually be next Friday since the first video was on December 8th, providing they are going purely on date alone.

@deathlessgamer

6 жыл бұрын

EasternSkvngr Whoops my bad, I thought it was Dec. 2nd, but you're right it's Dec. 8th.

@IdealIdeas100

6 жыл бұрын

Well it should be up soon regardless, thats assuming they didnt forget about it or accidentally fuck up the results by moving/unplugging them when they did a bunch of that renovating recently

@HarryWizard

6 жыл бұрын

Idealideas100 or the power outage.

@nightcorefusion3884

6 жыл бұрын

They moved and unplugged them during all the building work. You should check their twitter more often.

So do I see this correctly: you removed the lid with the engraving, put it on a new CPU and then covered the engraving thermal paste and put a FAN on top so now nobody can see it?

@edwarddesposito4476

6 жыл бұрын

I thought slavery was abolished.

@bennyuoppd33

6 жыл бұрын

Linus isn't bound by law.

@spicydeath82

6 жыл бұрын

never heard of the silk road eh? slavery still exists. usually it's sex slaves now days. also big problem with slavery in dubai.

@TsunTzu

6 жыл бұрын

This! WHY!?

@quickhakker

6 жыл бұрын

mavchb it's not about seeing it it's about knowing it's there

2:14 *"SOMEONE WHO WON'T DROP IT"*

@HKS-Digital

5 жыл бұрын

😂😂😂 just noticed the little caption

@JCSViperion

Жыл бұрын

I am your 69th like

I often feel like a klutz but then i see Linus doing anything 'practical' and feel like a Boss! Thanks Linus.

@christopherkidwell9817

5 жыл бұрын

Yeah, Linus makes me feel better about myself because I am kinda like him but not quite as bad as him.

Linus gets a gift. Immediately tears it apart.

@maxmustermann1455

5 жыл бұрын

yeah he didn't remeber the old saying "you don't look a gift vanity CPU under the IHS"

@deusexaethera

5 жыл бұрын

I bet he was fun at Christmas as a kid. Wait. Do Canadians have Christmas? Is there some special Metric version of Christmas I've never heard about?

@charlesleonitol.iringaniv8320

5 жыл бұрын

Linus gets New Ryzen 7, let it drop to the ground along with the Titan nVidia. *Some of us are envious , ya know*

@DevinxHyperionx

5 жыл бұрын

Shawn Elliott Christmas isn’t a region tradition. It’s a religious tradition. Christmas celebrates the birth of Christ.

@SolidSonicTH

5 жыл бұрын

AMD loves him enough to send him a vanity CPU with his name on it. He then proceeds to slap it onto a working CPU, smear thermal paste on it, and shove a cooler on top to never look at it again. Lel.

Im too scared to delid a jar of pickles and this guy does this...

@heavilyarmedsquid7063

6 жыл бұрын

i know, i’m only starting to water cool my pickles

@quadkopter

6 жыл бұрын

Use a spoon to pry up the side of the lid; I usually use the handle and it works just fine 😂

@therealb888

6 жыл бұрын

Quad I have splilled pickles before, not proud of it!

@bie2can

6 жыл бұрын

i'd do it too for free stuff

@nzane1216

6 жыл бұрын

Get a butter knife and hit the rim of the lid in a cross pattern. Works with shintell as well

8:32- the most defeated facial expression ever by Linus. This should be painted by a famous artist and sold for millions

@veryominous774

5 жыл бұрын

That's exactly what I was thinking. You almost see the condensation on him from the ice in his veins.

You literally did a brain surgery without knowing what are you or should be doing, completed it, and the patient lives. If this is not a miracle, I don't know what is.

@xephael3485

4 жыл бұрын

probably wrecked some CPU's and after failure gave it to one of his cronies to finish.

@fractal9449

3 жыл бұрын

xephael You literally watched him do it, ya miserable sod.

@jackvambracetube

3 жыл бұрын

"That was incredible, how did you do that?" "I have no idea whatsoever."

@DragonMoth34

3 жыл бұрын

So anyway, I just started cutting.

Heres a smart idea Take a expensive exclusive cpu plate that has ur name on it and put it on some other expensive cpu and then bury it by a big cpu cooler to never be seen again. I wonder why no one else thought of that

@Orderdrake

6 жыл бұрын

Best video evah!

@MX26_

6 жыл бұрын

Get outta here with your logic! I mean honestly, you can't tell me that having a working CPU with your name on it isn't cooler than a show off piece. Sure, it makes more sense for it to be a show off dummy, but it's not nearly as cool.

@XThexdemonataX

6 жыл бұрын

What also drives me crazy is how stressed he was when he thought he broke it. I don't know if he was putting on a show for the camera but if you are going to be that messed up about breaking your processor then you shouldn't take the risk in the first place.

@D3thM3tal

6 жыл бұрын

...but YOLO. Life without taking chances is just boring.

@gytux0258

6 жыл бұрын

maybe because its entertaining

Spoilers. Linus drops stuff

@RettigJ

6 жыл бұрын

This is news? 😂

@RettigJ

6 жыл бұрын

This is news? 😂

@LannnR

6 жыл бұрын

Normal

@MGlBlaze

6 жыл бұрын

I'd be disappointed if he didn't at this point, honestly.

@Mister-Tea

6 жыл бұрын

This isn't a spoiler since NCIX time XD *RIP*

Always painful to watch Linus work with his hands -_-

@ryskbotvladimirivanovic1767

5 жыл бұрын

Poor wife :C

@chriscole9621

5 жыл бұрын

@@ryskbotvladimirivanovic1767 lol

@thekorean8342

3 жыл бұрын

@Tony N bro im a american but like, imagine judging some guy with more knowledge and expirence then you on this topic because he slipped up on temptaure conversation for a second. His country doesnt use F as a standard, imagine thinking your one chance progect was sitting at 250 degrees C

PPPPPP Proper Preparation Prevents Piss Poor Performance

@dylanp8994

5 жыл бұрын

Plenty of Prior Preparation Prevents Piss Poor Performance PPPPPPP (one more p)

@mohammadadil4175

5 жыл бұрын

Hey! You stole that from West Coast Customs.

@galilool6053

5 жыл бұрын

I read it with 'penetration' and it still made sense...

"Do as I say, not as I do" -the best quote.

Wouldn't it have been easier to use their new Laser Etcher to etch LTT into the already working CPU?

@dickr9345

6 жыл бұрын

GenericSwede Wouldn't It also be easier to not wipe your ass after taking a shit...? Easier=/=best or ideal 🙄

@looijmansje

6 жыл бұрын

CO2 lasers don't work on metal if I recall correctly

@dickr9345

6 жыл бұрын

It's irrelevant, anyway. Why would they want to etch their own "fake" one? Asking that Is kinda like saying "Why get someone's autograph when you can sign it in their name and make your own"? Defeats the entire purpose...

@MrDoboz

6 жыл бұрын

Dick R so what? now this is like stealing the autograph from a squier and putting it on a gibson. that's the same shit in my opinion

@dickr9345

6 жыл бұрын

MrDoboz Huh? That's a shit analogy, IMO. He took a commemorative, custom engraved IHS off of a dummy CPU and put it on a functioning one. How do you figure that's in any way similar to taking something off of a budget oriented product and putting it on a higher quality product -made by an entirely different company? I think you're grasping for any reason to hate on something he's wanted to do for some time now to something that belongs to him, and as such can do whatever he wants with it.

9:22 looks like linus thinks Hitler fixed his CPU.

@uwirl4338

4 жыл бұрын

You gamers are obsessed with Nazis huh

@pauhull

4 жыл бұрын

wrong arm unfortunately

@DabutCHeR3000

4 жыл бұрын

Wrong arm

@arbiterregnant

4 жыл бұрын

Bruh.

@Zorro9129

3 жыл бұрын

@@uwirl4338 As a gamer, can confirm we all have secret copies of _Mein Kampf_.

der8auer is everywhere

@tajdidajman4889

6 жыл бұрын

Laurin Axenfeld i am der8auer (walking dead)

This is such a terrible idea. Thank you for doing it. lol

@turboshamu

6 жыл бұрын

it could with stand 350c and it was only heat up to 200c. who's the the dumb one here?

@channelofstuff6662

6 жыл бұрын

its runs hotter playing a game. static is way more deadly

@LAppelDuVideo

6 жыл бұрын

LinusTechTips in a nutshell

@sjarkulf

6 жыл бұрын

forgotn1 .

@charlesleonitol.iringaniv8320

5 жыл бұрын

@Oliver Hancock Then why the f*ck are you here dumb@ss?

Delid a 1000$ CPU to put a "custom" IHS, put a giant cooler that covers it entirely on it

@charlesleonitol.iringaniv8320

5 жыл бұрын

Step 3: Profit, views & sub money.

@vasocreta

5 жыл бұрын

We ask: "Why?" Linus responds: "why not? "

@stuarthamilton2739

5 жыл бұрын

Should engrave the underside of the MOBO whilst at it and maybe in the inside casing of the PSU! Still, fun to watch lol.

@Noooo23523

4 жыл бұрын

3990x is 4000 dollars

8:48 When linus grabs a manual something really bad is going on

Time to start your new line of Laser-etched Linus Tech Tips Merch Vanity Threadripper (2) chips! :-)

prank idea: switch Taren's hardware out for crap hardware and watch him rage while he is trying to edit XD

@cristivpopescu

6 жыл бұрын

this is actually a good idea

@vladpuriy

6 жыл бұрын

please linuse

@kittyrules

6 жыл бұрын

kelan andersson not if you preboot it for him

@anudeepk7579

6 жыл бұрын

That would mean a setback for the company if he can't edit videos which they wont do. It's a bad idea anyway.

@unoriginalyoutubename8761

6 жыл бұрын

Cloud Pretty sure they would plan out what videos he edits and when...

No TUNNEL BEAR today. :(

@mizanchoudhury9536

6 жыл бұрын

Gaming Berry he will be missed

@hardware_geek8136

6 жыл бұрын

Oh xD

@depizixuri58

6 жыл бұрын

It stopped being practical with the latest updates.

@prathamberi

6 жыл бұрын

depi zixuri never used it...lol

@drawmaster6343

6 жыл бұрын

Tunnel bear works brilliantly, until my high school blocked it form working on the school network. Jackasses.

Supreme effort - thanks for sharing with us all your wrestling match - nicely done! Curious though, did you use liquid metal CPU to heat spreader?

When you have so many AMD threadrippers you just start ripping them apart.

Oh sh**, something's wrong! Oh wait, I forgot to plug this in!! Every damn time!

@DragonProtector

6 жыл бұрын

lol i was like um ya of cource he forget to plug something in

@ldiego2601

6 жыл бұрын

Gotta add some drama to the video...

@eamonnteh

6 жыл бұрын

Krešimir Jurilj %

9:34 waits for nazi photoshops

@felixnurscher6017

6 жыл бұрын

Gimme a sec

@watermelonninja7871

6 жыл бұрын

Lol

@IIlIIlIIlII

6 жыл бұрын

XxX_Mazeflow_XxX Mirror the image...genius.

@jefftragheit

6 жыл бұрын

I WAS THINKING THE SAME THING LMFAO.

@firefly2472

6 жыл бұрын

im gone do it haha

Does the vanity CPU work..? Or did you switch the broken one with a working thread ripper?

Man it was stressful watching this. You gotta slow down and calm down dude!

@Vaerak

5 жыл бұрын

@Bezzegh Adam its all pretend and staged when hes freaking out

@whiteknight7wayne493

5 жыл бұрын

Nah , he's trying to be as clumbsy as Jay..he;s close

@KillaBitz

3 жыл бұрын

I think he said he had ADHD as a kid on a wan show once. Seems more like PBO if you ask my though.

@nobodyislisting

3 жыл бұрын

Agreed!

you ripped the threads of the screws while working on a threadripper *insert lenny face here*

@dudo626

6 жыл бұрын

( ͡° ͜ʖ ͡°)

@jikseri5065

6 жыл бұрын

dudo626 i rest my case

@LokiTheGreat100

6 жыл бұрын

( ͡° ͜ʖ ͡°)

@CIubDuck

6 жыл бұрын

that's not how you use a lenny face

@lightningdev1

6 жыл бұрын

(⊙_⊙)

lol only Linus can forget the HDMI cable and start panicking

@evanyoung9714

5 жыл бұрын

20101tom: When your troubleshooting and you change one thing and hope it works.

@beanboy9029

5 жыл бұрын

@CaptainMcShotgun your*

*hours of troubleshooting. *checks cables *plugs hdmi cable in

0:47 That smile is so devious and wholesome at the same time

Deliding Thread Ripper? it's official Linus has lost his marbles. All of them

@nightcorefusion3884

6 жыл бұрын

They got swept away during the construction. Or maybe they got shot when he unboxed his second RED "WEAPON"

@maleknecibi

6 жыл бұрын

Or so Linus thought. (CSF prank)

Love the fact that you do all this just to hide the beautiful IHS they sent you...

@Jaakko_Ruotsalainen

6 жыл бұрын

I doubt he'll actually use it regularly. Just wanted it to be a working cpu instead of a dummy one.

@zstewart93

6 жыл бұрын

He could build a closed loop liquid cooler with transparent cpu block.

@cy-one

6 жыл бұрын

Because plastic transfers heat so well from the IHS to the water, right? >.> :D

@mjc0961

6 жыл бұрын

zstewart93 Transparent blocks are so you can see the coolant. The coolant and the metal heatsink will still block your view of the CPU.

@cy-one

6 жыл бұрын

Coolant only if it's coloured. But yeah, the coldplate will block the view of the CPU (which is why i said "plastic transfers heat so well /s." Coldplate would need to be out of plastic to be able to view the CPU).

Best Threadripper meal ever #LinusBakingTips

One of my Favorite Channels , Keep posting

@bluz9951

3 жыл бұрын

nah bro 13 million subs they just gonna stop uploading randomly

@the-lag-gamerita5446

3 жыл бұрын

@@bluz9951 sir,it was 3 years ago.they could have even had only 500k subs for what you know

@Carlos-lq7ey

3 жыл бұрын

@@the-lag-gamerita5446 yeah nah they have had 13 million subs for years no new subs for a while

@bluz9951

3 жыл бұрын

@@the-lag-gamerita5446 uhhh i’ve been watching for 5 years i know for a fact they didn’t have 500k nice try bud

@bluz9951

3 жыл бұрын

@@the-lag-gamerita5446 linus hit 3.5 million subs around the time this was made btw

so if you delid it will it produce as much heat as the sun?

@soloyolo7374

6 жыл бұрын

Yes

@Mitchelskater

6 жыл бұрын

no less heat than an i9

@Ranesu

6 жыл бұрын

If it becomes a deadly laser , then yeah pretty much.

@ivand5699

6 жыл бұрын

No less heat than an i9? AMD CPU's are barely cooler than Intel and thats with soldered IHS... an AMD CPU would melt itself without solder. And no I am not an Intel fanboy because my sweet dream right now the R5 1600 but im waiting for Zen 2.

@soloyolo7374

6 жыл бұрын

Ivan D So many AMD fanboys.

Linus was supposed to be #1 but then dropped to #39

I love the range of emotions he went through in this video. He reminds me of the way i am after a system build. That anticipation then the anxiety when you first turn it on and things go haywire. Then the final success. That's what i build pc's for. I live for it!

Intel: " hey we got a special Aniversaty cpu ... Yeah no we are not doing anything special." Amd: " hey guys want a free vanity threadripper with custon engraving?"

This was like a train that constantly kept derailing but then still managed to arrive somehow :)

@blackbomber72

6 жыл бұрын

Mathias The derailings canceled each other out

@pokepok3265

6 жыл бұрын

By gods! The train derailed onto the tracks!

@farmea633

6 жыл бұрын

Mathias ooo

Great recipe of baking a CPU. Next time bring with you sprinkles, it will be much delicious ;)

@DragonProtector

6 жыл бұрын

!!!!

@Voluse

6 жыл бұрын

Anton Makov I added extra thermal paste to mine. It came out great! Delicious!

@dickr9345

6 жыл бұрын

A little caramelized glaze wouldn't hurt either. Or, if sweets aren't your thing, a few coats of your favorite BBQ sauce - periodically applied throughout the baking process - could really spice things up. 👌

@euphoria3066

6 жыл бұрын

www.change.org/p/everyone-intel-use-better-thermal-paste-between-ihs do support for intel to have better thermal paste between IHS and cpu itself

@antonmarkov2893

6 жыл бұрын

Anton Makov What a coincidence this is :D Hello there Mr Markov.

Was your de-lidding tool pre baked to remove oils embedded in the aluminium? Im not much of a tech guy but I am a metal guy and after machining anything where oil from machining or oil from the metal itself is critical I will clean it and then bake it, like prepping for powder coat ect...

I love watching videos like this one. Thank you Linus.

sooo... can i put the lid of a 6600k on my q6600???

@thecanadianlanboy8132

6 жыл бұрын

If your litteraly speaking, no, q6600s "lids" are soldered, unless you have expensive/enterprise grade machinery

@roycemeyer2391

6 жыл бұрын

Yes, piece of potato, if the product names look similar, it means that everything is interchangeable. If you have an old GTX 480, and want a newer RX 480, you can actually just replace the cooler portion of the card and BAM much faster RX 480.

@ferntree5359

6 жыл бұрын

Its funny how many people took this so seriously...

@husefun

6 жыл бұрын

........ no ..........

@JoaoVitor-cw2vg

6 жыл бұрын

TheCanadianLanBoy no they're not, they are glued the same way as a new processor

He says he's set the oven to 355° and wants it to be about 15 degrees lower than that... Then takes it out at 250 and wonders why the solder didnt melt... Good job linus.

@fredrik4527

6 жыл бұрын

AeranoZ Music 250 fahrenheit is almost half of the same in celsius 122 degrees. In canada, the measure is celsius, 350 celsius is 660 fahrenheit. His flir tool probably has two settings.

Why you did not shown how you reglued it and what thermal compound have you used

@erikburzinski8248

5 жыл бұрын

He probably didn't regule it

3:30 yeah, any self-respectable engineer knows the best way to measure metal temprearure is by IR

@Cooe.

2 жыл бұрын

I mean, if it's the right color it's usually just fine & dandy, but reflective as shit bare aluminum? Yeah, hell to the no.

Now take the original CPU spreader and laser engrave it yourself.

@changye9604

6 жыл бұрын

That would have been so much easier. Like literally there are shops everywhere that would do it for you.

@smartroadbiker

6 жыл бұрын

@Chang Ye - but much less entertaining and cringe inducing LOL

@MurkleQ

6 жыл бұрын

And you wouldn't even need to delid it..

@Sulfen

6 жыл бұрын

They made between $25,000 to $50,000 on this video or more from ads and sponsorships. They can buy several more CPUs that expensive with that money.

@alexoja2918

6 жыл бұрын

Could put the number #1 on it and be happy

Psst Linus, you could just use your new laser engraver to put your logo on a CPU and avoid a lot of hassle :)

@DaviRBify

5 жыл бұрын

Laser dont cut shiny surface boy .

@jakubb8472

5 жыл бұрын

But this is LTT, it has to be overcomplicated

@maxxiang8746

5 жыл бұрын

@@DaviRBify it will, just not as well

Well why wouldn't you take a beautifully personalised and presented heat spreader and put it under a CPU cooler so you can't see it... right? Great video! Thanks Linus!!

So you have amazing CPU lid in a fancy case where you can show it off to everyone but that was not good enough, I say this with a smile. And does anyone know the effect of thick thermal paste. I am by no means an expert so I am inquiring, it is a Canadian thing. What I mean is it is designed to work really thinly to fill the surface micro scratches? Would the much deeper engraving not cause hot spots?

infrared thermometer don't work properly on shiny surfaces

@firefox1294

5 жыл бұрын

They do if you put some maskin tape on it

@dirtyasianmafia2310

5 жыл бұрын

damian herrera - then the masking tape would melt

@pierreuntel1970

5 жыл бұрын

@@dirtyasianmafia2310 kapton tape

@lmaolol69

4 жыл бұрын

They do? I dont understand why it wouldnt, shiny surfaces arent full on mirrors, unless its like full on chrome that looks like a mirror it works

@DigitalEWhore

4 жыл бұрын

@@lmaolol69 Shiny surfaces dont emit as much infrared radiation as less shiny surfaces. While typically metals are the main exhibitors of this trait, even just glossy paint and cause inaccurate readings

Now you really made it to the delid-family :D Good work man! I approve.

This video made me really happy. The tension build up, it not working, and then... it worked.

Hey Linus, not sure if you'll see this. But thanks for your videos. Enjoying your content and I hope you will continue to bring out your videos in 2018 and beyond. Always look forward to the new ones, as well as these old ones.

You forgot salt, pepper, and spices before baking that CPU, it gonna be taste great.

or use your lazer cutter for ingravig the 1920x rather then risking braking it

@hardiancandra7368

6 жыл бұрын

random E I think when he's filming this, the laser cutter not arrive yet, it can took them 2 weeks to make a video

What was the fix for the 0D post error? Says it might be the 8pin power connector and then the hdmi connector but still errors after that then just posts out of nowhere

SO WERE you going to source the indium to resolder the chip?

8:27 Linus is like a surgeon trying to delivery his first-born son from a mother-board named Asus. The baby boy is named Ryzen Threadripper, what a fitting name for a baby.

@ChrisD__

6 жыл бұрын

AngryZombie808 His 4th son?

@RizLazey

6 жыл бұрын

Cringe af eww amd fanboys deez days

Your window has no signal...

4:10 Though I'm not an AMD advocate, this just tore my heart a bit. It may be just a piece of metal with conductors and whatnot but it (may) still has feelings.

is there any way of knowing which amd cpu are soldered and which are not? i got an amd athlon II 2x 220 and an amd athlon II 4x 630 and from a old still working pc. I cant find any resources if these are soldered because i wanted to try and delid the 630 just for experiance.

TFW 5 mins into microwave and chill and he pulls out the screwdriver

9:21 linus nazi tips

@ikhsanhasbi657

6 жыл бұрын

I knew his sandals are nazi agenda!

@NanoMine

6 жыл бұрын

InfernoDukem or maybe video is mirrored.

@dandremcleod8503

6 жыл бұрын

England is my city jake pualer

@keyboardkyle1898

6 жыл бұрын

InfernoDukem Why take it seriously? Jokes are a part of the internet, Dipshit

@meistermane

6 жыл бұрын

Wrong arm and angle tho

The mess up counter for me is 8 or 9 including the fact it didn't work the first time Linus put the threadripper in the motherboard and tried to turn it on.

a question what do you do with all the build stuff

Why didn't they use their new laser cutter to engrave it?

@jakegarrett8109

6 жыл бұрын

Wouldn't the diameter of the beam be more important than the power rating? For instance, half diameter gives you 4x more watts/area, whereas doubling power only gives you 2x watts/area. I would think the watt/area would be a better indication of the material it can work with (may be slow at 40w, but who cares if it gets the job done).

@LunaphaseLasersOfficial

6 жыл бұрын

Power density only takes you so far, unfortunately. Keep in mind, there's a physical limit to how far a beam can be focused, which is dependent on it's wavelength. With a CO2 laser the wavelength is 10600nm which is fairly large, and you cannot achieve a focal point smaller than that. Unfortunately, more power really is the only solution for certain materials.

@jakegarrett8109

6 жыл бұрын

I know it will be dependent on several things (the IHS is a heat spreader by design). So you have a function of rate of heat transfer from heated area (thermal conductivity dependent), absorptivity (how much it actually turns into heat vs bounces back), and light beam physics limiting area (as you mentioned). Then you also have temperature the materiel needs to hit to solve for that equation. Shouldn't be difficult to derive that equation, but I'll leave that for after my exams to solve for fun in my free time (someone's probably solved it, but where's the fun in just looking it up?)

@Epicvampire800

6 жыл бұрын

Because they wanted to use the one amd sent them and make a video about it...

@felixokeefe

6 жыл бұрын

I have access to a 20watt fibre laser marker machine. It can mark stainless steel a range of colours. With lasers wavelength is more important than power.

Its LID fam

@noabsolutelynot3660

6 жыл бұрын

aarr1n only good pun here

@ChakkyCharizard

6 жыл бұрын

...Fuck you

@noabsolutelynot3660

6 жыл бұрын

Chakky-P Guess you can't handle puns?

is fun to watch linus work :) keep up the good work

Hey Linus can you recommend a motherboard that's ideal for overclocking please? I can get a Ryzen 1700 upto 4GHz for about half a minute before the system freezes so I suspect it's an issue with the power delivery. Thermals got high but it didn't crash because of the thermals as I could get it to reach even higher temps and remain stable at lower voltages and clock speeds so I think I just need a motherboard with better VRMs. But I don't know which series of motherboards or even which brand is best. I can sort out any thermal issues I'll have but it's this problem that I'm clueless about.

soooo what happened to the bitcoin farming video?

What if you used you Lazer cutter/engraver to carve LTT into it?

@c0kosnuts2

6 жыл бұрын

This^

what kind of remote is he useing is that something made for that tv or is that something that can be bought and used by anyone on there pc

Linus my laptopp screen is not working, it did this before and all i did was remove the ram and wipe it off then put it back but now its not fixing the issue, do you have a idea what i can try>? iv tried many things for hours now, laptop is a toshiba sattalite L550D

Who's watching in suspense? #Even_Linus_Cant_Break_AMD

@mat.quantum2671

6 жыл бұрын

Don’t test him

Learn as u go. No prep at all. That Linus for ya

What is the make and model and size of that wall monitor? I must have one...

What transportation does Linus use to transport those solid brass ones?

to get more views! is the simple answer to your question LinusTechTips!

There's like 6 reasons in this video alone why you didn't get number 1 Linus.

@ike8938

6 жыл бұрын

JimmyGio more than that

the engraving means less contact with the cooler right?

Hi Linus, Someone could tell me,, use a improper heatspread system will burn my 1950x or the processor can handle overheat? i`m testing my old cooler but i will put a thermaltake riiing 280mm soon.. thanks

Since you have a laser cutter, why don't you just LASER ENGRAVE "Linus Tech Tips" on a normal Threadripper?

@jfkfromclonehigh8157

5 жыл бұрын

I can't see your profile pic

This is like buying up all the RGB gear you can and then putting it in a Corsair 200R. Then again, LTT built Hubert, so I suppose it makes sense.

2:14 OHHHHHH ROASTED TOASTED DAAAAAAMN i love these editors

0:34 the look of madness on Linus' face lol

Lisa Su (AMD President and CEO) got 1950x 1/250

Can't wait to see the compensator 3.0, what's it gonna have? x4 Vega 64's, i9, TR, a massive radiator

@MrDoboz

6 жыл бұрын

vega 64 is a POS

@Leviathan431

6 жыл бұрын

MrDoboz You're a bundle of positivity, aren't you?

@Jtw0912

6 жыл бұрын

hell ya, a duel socket mobo with an 18-core i9 and 16-core threadripper

@SkiDaBird

6 жыл бұрын

But how else are you cook dinner while gaming? This is coming from an AMD guy too.

@haydentaylor2101

6 жыл бұрын

MPrime simple, Pentium 4 plus GTX 480 in 4 way sli

Wow! That post code threw you all the way back to a paper manual. The struggle is real lol

09:39 "You have got to be kidding me!" exclaimed the man who just minutes earlier put a Threadripper in a vice and baked it