It is amazing helped me a lot to educate our staff! thank you.

Thank-you for the knowledge

Good Learning Experience

Thank you 😀

Sir, Please share about Hydraulic Pipeline maintenance procedure, replacement, fabrication & fixing

Thank you for video! Let me ask a question. I have WIKA pressure gauge model 213.53.063 (0...6 bar). I noticed liquid leakage, part of the liquid poured out - so I want to buy Glycerol Pharmacopoeia (99.8%) and refill. (1) In manual for my model series WIKA mentions both Glycerine and Silicone Oil as possible fluid. (Glicerine-water mixture I exclude because it is for pressures 0...2.5 bar, as mentioned in manual). So just want to assure that Glycerine, not Silicone Oil, is OK for my particular gauge. (2) Can I just refill the missed volume of liquid, no need to pour out all the remained liquid first? (the remaining liquid looks entirely perfect) (3) As I can see in your video, there is small air buble remains in gauge (liquid fills 95-98%). As I remember, mine was the same out of the box. Should I fill same 95-98% of volume, or can I fill it upto 99-100%?

Can these types of guages be used for co2 for welding purposes????????

oh i thought my compressor is now broken because there is water inside the gauge. thank you for this

pls. help WIKA brand for my LN2 tank. Analog gauge and digital gauge for Liquid side of my LN2 tanks. Thanks in advance.

So is it mineral oil? Asking because I have hundreds and if it is I'll drain all of them before I scrap. Mineral oil is just baby oil without a smell and has many uses. Looking forward to an answer if someone knows. Gauge only goes to 60 if that matters.

got a question for you i got a liguid gauge 0 to 60 and i got a 1990 k5 blazer got my engine rebuld i did some up grades and some mods to mt tbi so i need the gauge to set my regulator pressure and i got some to burn my chip i put bigger cam in it ..my gauge were reading 10 psi with the stock spring and i try to adjust it but it stay at 10psi so i were thinking maybe the spring were weak so i put in a 18psi spring when i frist put it in with no adjustment it was reading 10 psi ..so i started to adjust it and it went to 20 psi i were trying to get it to go to 14 psi so when i back off it the screw is not even touching it and it is still at 20 psi it as if it is sticking ..and when unscrew the gauge it dont drop down to 0 and it should what do you think

@Aawd695

Жыл бұрын

Burp the liquid rubber plug by opening it to release the pressure, then close it.

May I know how to reset Wika pressure gauge reading to zero?

Filled with mineral oil?

So if gearbox oil is leaking out of this lever, gauge is bad I'm guessing?

Can u use the pressure gauge without fluid?

@TECHNICALPIPING

2 жыл бұрын

Yes.can...

What kind of oil is used inside ?

@tariquehassan2023

Жыл бұрын

Glycerine. Silicone (oil) for larger temperature extremes and Halocarbon® for use with oxidizing agents such as chlorine, oxygen and hydrogen peroxide. :)

can liquid filled in 0-10 bar pressure gauge be used upside down or on its back, say if the gauge was connected to a flexible hose for mobile work

Often glycerine