I've been away from the rc world for a while . I chose to get a new xmaxx at Christmas I like the fact your telling people fact , basically just drive the truck and enjoy it Thank you

I’ve had mine since 2017 and the only thing that I did was upgrade the wheel hexes to aluminum because I was noticing wear and twisting from the 8S power. Since then, it’s crazy durable and I take this thing to the skate park and jump it off half pipes while doing multiple flips in the air. Only parts I’ve ever broken were from a wreck and I think the total cost for replacement parts was $12 total. The XMaxx is the ultimate basher and if left alone and maintained properly it’ll last an incredibly long time and give hours of enjoyment to whoever owns one.

@anthonyminggia6794

11 ай бұрын

You are absolutely right they really do grip I built a RC track in the backyard I was trying to kill the grass with Roundup but then me and my friends we started running our xmax on the track and it tore that grass all to pieces.. I'm 50 years old been had my xmax about 6 months now it is soooo much fun!!! The way this thing corners is unreal!! Please be careful around little kids I hit a little kid with my rustler and everybody laugh my cousin hit a kid with his xmax and it was a visit to the ER so have fun but be careful. A rc this big and this fast can be DANGEROUS!!! I love it though!!!!

My wallet said “thank you” for this video!

@Mrfearknowone

3 жыл бұрын

Agreed.. My wallet just high fived ur wallet !

@brysonkuhn3290

3 жыл бұрын

My wallet said "please don't buy an xmaxx". Booooo.

@kevindigit

3 жыл бұрын

@@Mrfearknowone 🤣 that’s a good one

True with any rc, upgrades move the weak spot, it doesn’t eliminate it. Great video! Thanks for your time. 👍🏻🍻

@jagvillhem1jagvillhem195

2 жыл бұрын

It could like hinpinshmod on xmaxx 😡

I completely agree with chasing the week point. I have a lot of up graded RCs and my wide maxx is stock except for the long arms. Some RCs just don't gain much from throwing money in it

RC cars are like real cars, the more you "upgrade" the more stuff breaks, found this out long ago

@jagvillhem1jagvillhem195

2 жыл бұрын

Not really hinpinshmod on xmaxx makes allt more durable a Bolt and a nit to gold The arm togheter

I have left mine stock except a few tiny things. Bigger hub carriers, and threaded hinge pins. I never broke the factory anything, but the bearing seals popped off a few times and the bigger ones just seemed like a great idea. I am very happy with my xmaxx!

Appreciate the videos brother. Thank yiu for the work and time you put into all of them.

@outsourcedrc

3 жыл бұрын

I appreciate you watching! Thanks a lot

I actually like ballooning tires. Aids in rotation in air and looks awesome. Not like belted tires will allow an xmaxx to make high speed maneuvers anyways. But I kept tearing stock 8s tires so went to duratrax lockups. I also went max 5 and leopard 5892 motor. Mostly because I wanted more rotation in the air. The xmaxx actually handles big power pretty well and they extra power and weight really hasn't lead to extra breakage. I do agree proline 4.3 tires are way too heavy and lead to breakage though. Funny how unsprung mass breaks everything but all the sprung mass I added haven't really effected the durability.

Chasing weak points just leads to more problems especially when it comes to adding weight and metal spur gears when unintended. It always ends up leading to drivetrain problems to some degree

I applied for a job at Six Flags this summer and plan on buying this RC once I start working. I've been doing research for a few weeks now, and it looks like the only thing people say is to upgrade the stock rear hub carriers to the RPM rear hub carriers as the bearings will fall out easily on the stock ones (they also say that the CEN threaded hinge pins are a good upgrade as well), so I might upgrade those to thing immediately right out of the box! Other than that, I'll leave everything stock and won't upgrade until something breaks, which seems like it's pretty difficult to do as the stock X-MAXX is pretty strong on its own!

Great video… I was at the Rose Bowl yesterday for the 4th of July Firework Show and my buddies had X-Maxx trucks making my Slash look Iike a toy. They had all the upgrades available including the Badland wheels and tires and they were popping suspension pins every 10 minutes. The pins were easy to replace, but still a drag to be constantly breaking down as people are watching and always be repairing the truck. I’m buying my own X-Maxx truck soon and I’ll will only be upgrading the body shell. Awesome advice and explanation for leaving the truck stock… thank you!!! 😁👍🏼👍🏼👍🏼

I say this on every post I see. Those tires are just too heavy.

@peterk814

3 жыл бұрын

That’s the dumbest thing ever. It’s an rc car. Unsparing weight means nothing.

@reidisaacson9623

3 жыл бұрын

@@peterk814 More weight, you're not going as fast nor are you jumping as high. Plus a heavier tire means more stress on the drivetrain

@peterk814

3 жыл бұрын

@@reidisaacson9623 it affects it in such an infinitesimal way you’re full of shit if you think youll be telling it jumps six inches lower. And more weight trade off for the better traction, durability and control these give you is a welcome trade off. Use your light ass tires. Do the wheelie and don’t put the power to the ground. I’ll beat you every time.

@reidisaacson9623

3 жыл бұрын

@@peterk814 Mine doesn't do a wheelie so bring it on

@MervHernandez

2 жыл бұрын

@@reidisaacson9623 Mine actually got a bit faster and stable. 🤷🏾‍♂️

Great video man!! I've got the Badlands and haven't experienced the same things your describing and showing in the video. I enjoy them because when I had my stock tires, I almost had them worn out around the outside due to the power slide turn around on the streets. I can still do this with the Badlands without flipping the truck and with as often as I do it the Badlands are holding up great!! I think you're used to driving it a certain way and now that you have made a change to the way it handles in your backyard you feel as though it's the tires and not the way you drive. Your just used to a certain result and with new tires it changes those results.

Hit the nail on the head, sometimes ya gotta leave them alone, and just buy stock parts if needed, some traxxas models are ABSOLUTELY PERFECT the way they are! Good video brother

I appreciate this video. I have several arrma 3s cars in my household and they’re all amazing. Once you learn how to tune and set it up, the only weak spot tends to be a $5 spur gear.

I'm a stocker too man! - I have only upgraded the rear carriers to RPM (bearing seals popped out of stock bearings), CEN hinge pins on the 4 outer corners (after breaking front left arm), and Traxxas black servo. Also sealed up stock wheel holes and vented tires to keep foams from getting destroyed by sand and water. - I have worn out my outdrives and the center diff shims (started popping internal gears) and replaced stock motor with a new stock motor due to front motor bearing going out (my fault for not servicing the motor bearings) since February 2017! - Longest running RC, on a single set of batteries, of any I have owned (the Maxx is right up there with it now). - This is one tough truck!

You make the videos I wish I could make. Your passion for rc's is how I feel. Brilliant content and I agree re: chasing the upgrades is an endless battle. I may be buying my first traxxas, the sledge. Most of my rc's are arrma. Thanks for sharing. Love your videos. John

I just got an XMaxx and did a lot of research before purchasing. I had seen a lot of people online having issues with the rear hub carriers and getting the RPM ones, so I did go that direction right off the bat. I did add some weight to the body with the goop and drywall tape. I also opted for the skid plate on the top. I ended up (with heat) gorilla taping the tires because they kept ballooning and coming unglued; one even exploded. I repaired the exploded tire with CA glue from the outside and really thin, scuffed bicycle inner tube with goop from the inside. I almost went down the upgrade rabbit hole myself until I saw how much the badlands weigh (and cost). After taping the tires no longer balloon. Speaking of balloons, I did wrap from the end links to the shock bodies with balloons, under the spring. This is better than shock socks because it actually seals the shafts from even the slightest chance of dirt getting in there and ruining seals. I consider this to be essentially stock with some reinforcements.

@Dingle-Berries

Жыл бұрын

Use 20lb fishing line for helping to stop ballooning. Also do the silicone ear plugs in front & rear differentials- i have no issues after doing that

@appye7994

Жыл бұрын

@@Dingle-Berries wow that was a while ago. This x-maxx has been through hell and back. it keeps on going. Very little time spent on the workbench. I did go with a higher weight (500k? 1m? I don't remember for sure) in the front and rear diffs and it crawls okay. I did build a super crawler and holy crap that thing crawls! I also did all kinds of antibalooning tricks including fishing line both inside and outside of the tires. It worked well enough for a year or so, but I ended up getting belted tires. If I remember right, the advertised weight was very negligible compared to other brands. Again, this was a while ago. I can look for specifics if you are interested. Lol, it always interests me to see how some communities are relatively troll-free, with far fewer people being butt hurt by differing points of view, compared to communities related to some of my other hobbies. Drone, video game and photography communities can be really congested with know-it-all negativity. Automotive, airgun and ebike communities are generally pretty friendly ... I'm brand new to 3d printing, we'll see how that goes!

Stock everything on all my cars minus servos. Amazingly I spend more time driving then sitting around waiting on parts. My experience says the less you screw with these things the better they work and less they break.

I agree. I run my Xmaxx totally stock.

Thanks for getting back to basics with your Traxxas cars. May not be as controversial as your arrma videos but your video posted is why I love you man. I’ve upgraded my shocks and wheels and light kit. Great car.

Great video thanks! I bought a second hand X-maxx that came with a bunch of upgrades like Duratrax tires. After watching this I am going to get some stock tires for it

I have done one upgrade that came in handy the aftermarket rear bearing carriers with a larger size inner bearing work great

@levistewart5610

3 жыл бұрын

can u send me the link on amazon?

@benwells5625

3 жыл бұрын

@@levistewart5610 rpm part number 81732. Not sure how to send link but they are available on Amazon and eBay the replacement inner bearing comes with them and you use your outer bearing

You educated me here on this one. Now I know not to upgrade my XMaxx when I get one this summer. Peace and Love..

I've had mine for 2yrs and everything is still stock

@samimtokhy9312

3 жыл бұрын

How often have you used yours? Im debating between the xmaxx and kraton, both 1/5 scale

@charlesedinger3063

3 жыл бұрын

Wait for arrma to drop the 1/5 kraton exb if your looking at that because the current kraton 1/5 is a huge disappointment without dumping big money into it I have a 1/8 notorious and just picked up an xmaxx I love my arrma but the 1/5 scale aren't quite there yet although the outcast is pretty cool I was really tempted by it but waiting for them to work out a few bugs

@MertNisa3168

3 жыл бұрын

@@samimtokhy9312 dont buy the arrma dude I have it and its a nightmare

@fahed7316

3 жыл бұрын

@@MertNisa3168 true i only drive the x maxx😩❤

@ahwayzcool4630

3 жыл бұрын

I've had mine for 5 days and only thing I've upgraded is the front and rear hubs to the rpm oversized hubs

Enjoyed this video and your perspective on upgrades.

@outsourcedrc

3 жыл бұрын

Thanks!

I agree 100%. I have around 13 RCs, including an Xmaxx. I never got caught up upgrades and mods. I keep it simple. I charge my batteries, I bash my cars, I break shit, I fix shit, repeat process.

Totally agree with you. Even the revo 2.0 stock tires are really quite good. I see a lot of people go straight to the belted trenchers. You lose drivability with those and weigh so much ends up either overheating your system or breaking other parts. I do run the non belted trenchers which are a bit lighter than stock. I would never go belted.

I say drive it before you upgrade it, things will break; replace/upgrade as required. I purchased my Xmaxx 2nd hand and blew a tire in first minute, I purchase Badlands and they are great, solid tire. Though my steering servo went after awhile and I replaced it with a 2085X. All has been good ever since!

@TheMr408

2 жыл бұрын

This is the approach I took with my 4x4 rustler and what I'm going to be doing with my xmaxx.

@Lithium023

2 жыл бұрын

I got mine second hand aswell and the guy never told me the foams in two of the tires were shot. Kind of a bummer but I heard the foams weren't good in the stock xmaxx tires. Guess we will see how the new ones hold up.

@Lithium023

2 жыл бұрын

@@dontplaydumb2352 that's good to hear, I can't stand scammers!

Nice bashing and information,awesome RC and have a great weekend

@outsourcedrc

3 жыл бұрын

Thanks! You too!

Really good guy doing an honest opinion appreciate that salute to you

My XMAXX is still bone stock. When the servo breaks I will replace it with the 1/5 scale servo, and when the motor eventually dies, I will figure out what to replace it with. It a blast to drive.

I love the vids dude! keep up the great work!

For bashers it seems more important to make sure everything is maintained, and fixed immediately when something is broke or out of align. I took your advice and added the limiting straps and aluminum rear chassis brace first thing though (Erevo). It's been solid, thank you for that. The cold is a killer though.

@outsourcedrc

3 жыл бұрын

Thats awesome! I'm glad that worked out for you.

Just now catching this video. I have an XMaxx due to arrive tomorrow and this video makes me happy :)

@outsourcedrc

3 жыл бұрын

You are going to love it!

Couldn’t agree with you more. Had badlands on my erevo 2.0 and it blew rod ends apart every single run. Pivot balls were no match either. Learned my lesson!

I feel your right. It's tuff out of the box. The only thing that sucks is the steering survo. It's a plastic gear cheep piece of sh#t. For the price of $100 you can upgrade to the 2085X which it should have came stock on it for the huge price of the Xmaxx!! Great Video!

I think the only upgrade necessary would be a max6 in my opinion! Love the video!! I just got a xmaxx two weeks ago! Love it!

I enjoy breaking the car and fixing it.

Awesome insight You are right, people go upgrade crazy! XMAXX is great out the box if you drive it the way it was meant to be driven.

Your right about added weight but honestly in my opinion with trenchers and a Max5/800kv system it’s a complete beast. Have yet to break anything on our Xmaxx with the max 5 combo.

Enjoyed the video. Only thing I have done to mine is install the included speed spur. Definitely recommend doing that. It makes backflips extremely easy. Still a wheelie monster, lots of fun.

@outsourcedrc

3 жыл бұрын

I'll try that

Thanks for this video! I’m about to buy my first xmaxx. I’ve been waiting for years to get my hands on one. I’ve finally saved money to get one. I think stock will be plenty of fun for me. Considering I’ve only driven 3s 1/10 vehicles! I’m so excited!!

Nice Blog Buddy!! very informative thank you for that, i do have a set of your badlands, i agree with you! the only problem is the stock tyres lose their foams rigidity after a period of time then seem to break apart inside the wheel and tyre which is a bit of a shame for the price of the tyres. but i do like using both kinds depending on what im doing with the x max. What a machine ..

makes a lot of sense. I put Tekno metal axles and aluminum shock caps on my stampede and have had almost no problems with that truck at all ever since.

Agree with you 100%. As for for running gear, almost all my RTRs stay stock. I do upgrade tires and wheels on my crawlers and no prep drag cars for grip and performance, but I don't really see the need to seemingly "upgrade everything" on my RCs, especially bashers. My Maxx and X-maxx are all stock too. I get its part of the fun, but at the same time, so much is unnecessary to do in my opinion in order to enjoy actually driving it.

I firmly believe that if you want to go faster etc for example, just run another car out of your collection that is better suited for higher speeds. If you take some of the cheaper cars around they will do say 30-35 mph, if you upgrade the same car with massive power to do 60mph. It wont last long before you start constantly breaking parts or huge crashes. Again leave that car pretty much stock & run it within its limits with out breaking it constantly, then swap to a more suitable car that is built to run consistently at the higher speed without breaking it or crashing it every time its run. I think minor upgrades are good to improve durability on some vulnerable parts are ok, but to spend fortunes upgrading a car seems crazy. Especially when you know you are pushing something beyond its capable limits.

Best xmaxx vid I’ve seen for a long time!

Good and honest video 👍🏻

I agree alot with what was said. I will say however it depends on how your running your truck. Three of us bought Xmaxxes and we live in a very wet area. Two of us ripped our tires within 3 runs. Others have commented that the stock tires do not work well in the wet but I really don't understand why. We all switched to prolines and while they are heavier we have had no issues and we run the trucks hard on a a bmx track. Other than the tires my truck is stock.

Great video thanks for share

The X-Maxx is a beast out the box for sure! However if you want to race around a track do flack flips/front flips or just be able to keep all four wheels on the ground then upgrades are a must. Nothing fancy....I use Hot glue for strength instead of buying aluminum EVERYTHING. Great Video!

I think it all depends on how you drive it/ bash it. Some people bash the hell out of it and then break thinks to then upgrade it to stop it breaking while bashing the hell out of it. I've wanted an xmaxx for over 10 years and still not bloody got one. Yet here I am watching every youtube Xmas video. Sunday i may go get one. Just a lot of cash to hand over and thats what puts me off. Keep up the good videos

definitely stock. especially tires. just the rear hubs i changed out, and the better servo. absolute beast

great video i bought a x-maxx 1 year ago and its still stock and my maxx its still stock i got different tires but the rest of the maxx still stock thanks for the video

I have them on one of my Xmaxx and I agree. stock tires work great.

That was a very interesting vid and review and yeah I do agree with u there, I have upgraded it with some m2c little bits, brace that goes under the truck and widened axles only so I have more of a tyre type like bk flips witch r like the X maxxes weight near on, but yes very interesting, I think I may of been going down that rs where Ur always renewing things so nice to c Ur vid thanks u may of saved me lots of money lol👍👌💯

You are right my friend. I don't have the XMAXX, but I have the Badlands on my 1/8 Summit, and they are way heavier than stock for a tire that's the same size.

THANK YOU! I love my X-MAXX stock, I bought the proline badlands ran it a few times and switched back to stock, the badlands are awesome and very responsive but I prefer the spongier chaotic feel of the stock tires. Great honest vid. *I did get the proline brute bash body.

You made a very good point I always wonder why people buy an Rc car and they will upgrade right away.

I agree! X-Maxx is excellent stock besides the ESC. Put a Hobbywing Max6 in there and you are good to go. Nice video🤙

@SoleToleCole

Жыл бұрын

Did your throttle cut out after switching to the max 6 I keep having brown outs when I go and stop fast

This is the best advice!

Big fan of your videos. My daughter and I have MERVs and have become more responsible owners with your example. Keep up the good work and follow your gut. We like the direction your channel is going and your excitement comes through wonderfully.

@outsourcedrc

3 жыл бұрын

Thanks! The MERV is a fun little RC. I was running mine the other day.

Amen, very well said my friend

Good to know. I will pay attention to similar things when deciding to update tires in E-Revo 2.0

@iasssen

3 жыл бұрын

E Revo 2.0 is not that tough stock. Straps, servos, RPM A arms, HD push rodes, toe links, brace, body savers, motor fans... it needs a lot of things and still not for mindless jumping.

@malcolmportelli9059

3 жыл бұрын

@@iasssen only thing that happened to my e revo was those servos. I got the suspension straps but I never had any problems before that. If a toe link breaks it only a 45 second fix

Not gunna lie, your yard looks spot on to my Uncles place in Michigan, lol no to put you on blast that's crazy but I just pick up a scrap box with an X Maxx in it and am piecing it together, so thanks for the advice, great content dude, keep it up

@outsourcedrc

2 жыл бұрын

Thanks!

XMaxx 3+years old all stock except ESC, original failed 6 months ago. Now 8s model with Traxxas upgrade program! Tough, straight, ORIGINAL!!! Love this machine

I have the 1st gen 6s x maxx I got when it first came out. I only bent one shock shaft on it since new. Last year I bought an 8s x maxx and have been through one stock esc, proline trenchers, proline badlands and the duratrax hatchet x. The prolines destroyed the gears in 2 servos. The duratrax were the lightest of the 3 but still had to upgrade to the metal gear servo for 100-bucks. Now I’m breaking arms. Sometimes it’s best to just leave things stock. I agree this is the case with the x maxx.

Traxxas does all the research and builds a great truck and people go screw it up with “upgrades” lol

@natehage7919

2 жыл бұрын

At the end of the day tho we all have fun upgrades or not each is there own

@93836

2 жыл бұрын

@@natehage7919 I don’t need a product to be “my own”. I just want a great product that performs well and is reliable. And I try to buy products that achieve that - as much as possible - right out of the box.

@dayadam16

2 жыл бұрын

This sounds amazing but for us first gen 6s xmaxx owners not the case. The version xmaxx hes running is upgraded. The revo first gen brushless version versus the 2.0 is a good example. The esc was not good for that size truck and could catch fire. Traxxas sent me the fuse link to fix it myself incase it caught fire lol. I added mamba monster x esc in my xmaxx instead and put the xmaxx esc in my summit. I broke so many gears on stock motor because it didnt have the cush drive yet. Went through axles and diffs as well plus tires sucked and would pop. The motor needed a fan cause it would get hot as shit and was underpowered for the trucks weight. On the other hand I do agree on the modding it as it has become a shelf queen after I did mod it with the leopard 5892 1340kv. How some people run the 58113 800kv motor is insane to me. I went through a lot of steel gears cause I never heard of using loctite on the motor shaft so the pinion would slip and go the edge leaving little contact surface. If you compare the newer versions of these it has bigger axles, better esc, better motor, better tires, better transmission, cush drive and better diffs. I kinda wanna a video just to show the opposite spectrum but at the same time agreeing with some of the breaks that come with it even though in stock form the right person can break anything.

@Cornelius456

2 жыл бұрын

You don't break anything buddy because you drive it and jump it quite conservatively and are happy with standard product and mediocrity! Thats fine. Some people like 40 yr old transams and others like Hellcats or twin turbo'd chevs! I guarentee my xmaxx is twice as strong and twice as fast and my 100ft jumps eclipse most of everything you do. All good though buddy, horses for courses and each to their own. Each to their own tho.

@papayspeanut

2 жыл бұрын

@@Cornelius456 I have a 600 hp bmw dude I know what modifications consist of. Kevin talbot even says the Xmaxx is damn near perfect out of the box with the exception of the servo. Hell even mine went out within a couple months. You’re talking as if people aren’t allowed to modify things

😯 thanks a bunch for keeping it 💯 I just purchased an X Maxx and a Maxx and with your knowledge and expertise I think I’m going to keep them bone Stock other than the Maxx wide kit and maybe the steel CVD’s thanks a bunch

@outsourcedrc

3 жыл бұрын

I'm actually going to take the wide maxx kit off the Maxx. I have a video about it comign up when I have time.

Good info, subbed

Mine is on its way, should be here tomorrow, the only things I bought for it are shock sleeve's rpm a arms for when they break, and rpm rear bearing carriers for if those break but that stuff I don't think will add much weight at all, loved the video, will definitely sub!

@outsourcedrc

3 жыл бұрын

Thanks! I’ve been looking at the RPM carriers also.

FYI. I’ve heard you and other you tubers mention it. But this is my first time experiencing it. I was somehow unsubscribed. So, I’m a “new” sub again!

Excellent video👍🙂 I definitely had this problem when building my Arrma Kraton v4 6s Piece by piece. I did this so I could put the upgraded parts on it that I wanted🤔 I have over $2000 into this truck and it is bad-ass don't get me wrong. I am constantly tearing up differential parts😒 I basically built a very powerful lead sled☹ Wish I would have just bought a stock one it would probably be more fun.

@outsourcedrc

3 жыл бұрын

I know that feeling

Great vid, as always! I don't think though, that the stock servo is too weak, I think the spring in the servo saver is too soft. I upgraded to the heavy duty X-Maxx servo from Traxxas (2085X). It also ships with a harder spring for the servo saver. This made a huge difference in the handling of that beast. I also upgraded to the threaded hinge pins from RPM and the Oversized Rear Axle Carriers. They come with much bigger bearings (RPM 81732). These are all the upgrades the X-Maxx needs imho. Gotta love that RC! Cheers from Switzerland.

@outsourcedrc

3 жыл бұрын

I bet that spring would kill the stock servo. I may look into getting that servo just to test it out.

@videocardzrule354

3 жыл бұрын

@@outsourcedrc You need the 2085X. It is a beast! You can steer under power really well. I run belted bead lock badlands with a 2085X. It turns amazing.

@nvl2691

2 жыл бұрын

Oh finally another Swiss RC enthusiast! I have a Mini E-Revo myself with a good bunch of upgrades (metal hollow balls, stiffer springs and GTR shocks, RPM front arms and bumper, Summit rear suspension arms, wheelie bar, motor heat sink, shimmed, re-oiled and re-greased diffs, etc.). Where do you run your car, any tracks in your region ? There's not much here between Geneva and Lausanne...

@3D1G1TAL

2 жыл бұрын

Don’t forget the traxxas 2087X servo gear upgrade.

I think your right upgrades do often lead to some issue or some breakage. I have kept my Xmaxx stock besides the max6. I upgraded to that esc as my truck was an original Xmaxx 6S and I upgraded it to 8S spec conversion. That and I run the RPM oversized rear bearing carries and I’m going to get the new front carriers. I also have RPM front and rear bumper supports. But that is all pretty minimal for upgrade. Just realistic upgrades

I agree except for one thing. I always change the bearings for acer for about 12 years now. The bearings are the best upgrade to any rtr and doesn’t make you chase breaks

I do have my xmaxx for a little more than 2 years now and still spur and pinion stuck but I have the badlands mx43 and still running strong nothing broken yet, hopefully still holding her ground lol, good video bro💯

I only upgraded to Badlands because I blew a stock tire. Truck is perfect! Only ever broke a shock cap when it was new. Wheels/Tires and RPM Arms is all that has ever been upgraded after that.

Well said! Got rid of my 2wd Rustler trying to make it into something it's not, and my "stock" buggies just run.

Hey I love your videos and I’m thinking of getting an xmaxx. Also sorry to hear about your dad. God bless.

@outsourcedrc

3 жыл бұрын

Thanks. Its a great RC. You will love it.

Totally agree. My upgrades are pretty limited to just more protection. Rpm rear hubs,dust cover, extra fan, Cvd boots. Did splurge on a savox 2292sg servo so I could put the upgraded traxxas black on my maxx.

@mattgibbons4021

3 жыл бұрын

How's that servo handle? I have a 2085X, but a stronger second couldn't hurt

Great video, I'm a Arma boy , now I think I will get a xmax. Cool

I saw myself with my Rustler when I got it doing the same thing, chasing the weak link ...makes a lot of sense, not comparing the one with the other but in theory...thx

@outsourcedrc

3 жыл бұрын

Yep thats exactly what will happen.

100 percent correct 👍👍. I have two , one wit every upgrade u can buy and I also have a totally stock and I will only bash the stock one and the upgraded one sits on my shelf

Mine is also stock at first but its just the way i abuse the xmaxx. Great great video!

Only upgrades worth while on Xmaxx is 1) Servo. Doesn't add weight but a pretty big upgrade for turning. Traxxas offers a direct drop in replacement servo for this truck. 2) oversize axle carriers by RPM. Doesn't add weight but increase load bearing potential if you're an extreme basher. Huge jumps etc. 3) ESC if and when your stock one breaks. Max 6 drops right in. Again, only after stock breaks. If it does.

Nice video. I agree. I have 10 year old 3.3 T-maxx and Revo. All stock. Quick. Durable. Wheelies on demand. Original motors. Others I bash with wonder why they can't do wheelies, why they cook clutches and gears, why they break driveshafts, why their motors overheat, etc. I tell them because they added way to much weight with "Upgrades." When I get an X-maxx, it will stay stock too.

Great video 👍👍👍✌👍

The badlands cause my pinion gear to come loose. It holds up better with stock tires when jumping. I use the stock wheels for stunts and the badlands when it's snowing or the yard is really wet. Also, the stock tires last longer if you cover the breathing hole on the inside of the rim.

I have this feeling with the regular Maxx. I do think that changing the gearing is a worthwhile upgrade for the X-Maxx after seeing the videos of the difference. I don't see the point in most of the other upgrades though. I am doing WIdeMaxx on my Maxx and putting lights on it because I play with my cars after dark during the fall, winter, and sprint.

One of the MOST LOGICAL, informative, fact based RC-Vidz that I have watched! I wish this could be viewed by the masses in order to help kill off this monstrous misconception of "Never Good Enough" and this would unequivocally save many people from going down the rabbit hole of madness chasing the weak link! 🙏GREAT VIDEO brother!

@joshkiel9405

2 жыл бұрын

I bought em and I think they are just fine

Nice video man. My xmaxx is stock besides the servo and HD arms as well. I think performance on stock tires and power is great. No need for me to upgrade and spend hundreds

I had to do 3 upgrades over time . The stock esc was causing the truck to lock up had to upgrade esc. Stock servo was not working good installed the upgraded servo. And the third upgrade was a unbreakable body

I love my Xmaxx, but I did do a few things to mine. Being used to my Erevo 2.0, I was a little disappointed in lack of wheelie and backflip abilities of the Xmaxx. I put in 20/50 gearing and its definitely peppier. I can get a backflip, but still not as easily as the Erevo. I’m ok with that though. I added rpm roof skids and reinforced the body with drywall tape and silicone caulk. I always heard the rpm rear hub mod was a must, but was skeptical. One of my rear bearings came apart after the second drive. I ended up doing that mod and am happy with it. I took my diffs apart and discovered that they were all low on fluid so I topped them all off. So really nothing crazy has been added, but my durability/fun has been increased, so I’m very satisfied with it!

My revo had a mind of its own and would start creeping forward just like your Xmx Once I did a re-bind with the remote/receiver, never happened again.

I bought mine used (it was 2 years old, still stock) I kept blowing rear wheel bearings so I did the RPM wheel bearing upgrade. (No issues since) then the ESC died, upgraded to Max6 (no issues since) and then my servo died. Upgraded for the stronger Traxxas servo (no issues since) I’m fairly certain that this is all you’ll ever need to upgrade on your Xmaxx... everything else only breaks if you hit something wrong.

The servo is slow and weak. I found this to be one of the best upgrades I done on mine. The electronics are fine, however upgrading here is definitely a matter of choice, not necessary, I agree. Since I do not bash mine heavily upgrading the motor is awesome,. The power and torque on command makes driving a blast ripping around. So much fun, and the sound from the mod 1.5 gears in such an adrenaline rush. More power turns the Badlands into grass ripping tires. They are a bit on the heavy side. I have found the Duratrax Six Pack X Belted Mounted Tires are a better all around tire. They do not balloon either. I enjoy watching your videos. You do a tremendous job presenting yourself. Thanks!

Throttle trim setting for the XMAXX rolling. Bashing is for people with money to burn, regular working folks like to take care of their toys. Simple. Drive it according to what you can afford to fix.