Pre-ordering an Aptera? Get $30 off the $100 refundable deposit with my referral link ☀ bit.ly/-Aptera

@glennnaylor69

Жыл бұрын

Thanks

@Blakelikesfood

3 ай бұрын

*FAIL:* Like the other 40+ companies, these all seem to be a scam. Sorry, I meant 200+ other companies, that don't exist period. Where is all this stuff, every week it's 10 more garbage videos of "Revolutionary this & that." for the past 15 years...every day, every week, every month, non-stop. Where is everything? It's like 99.9999% are a scams looking for investors, even things like Orbit electric hubs seen at SEMI 5 years ago and it's crickets. And more mind blowing, I'm the only one saying it, shouldn't the number one response be: "Oh look, another no-nothing product that you'll never see or hear or touch or know or have or drive or buy and with a 99.99% won't exist beyond the prototype." It's like all these videos are clickbait. You're going to go down a rabbit hole of hundreds and hundreds of these companies that produce nothing. Gee, is 2024, where the hell is ANYTHING? Anything? Anything at all? All garbage.

High unsprung weight immediately came to mind. Another problem I see mentioned is motor cooling, but I expect that could be easily improved by slanting the wheel spokes to act as fan blades to force lots of air through the motor. (have toihave gravel screens in the airflow, though.) The unsprung weight problem could be addressed by using lighter materials in the motors. Redesigning the motors to use larger bearings held in thick rubber mounts might cushion and reinforce the unsprung motors. All designs have problems, most conventional designs have solved them satisfactorily using new ideas and some compromises. These problems can be solved also.

@louisjov

Жыл бұрын

In an interview I saw, they mentioned the heat problem, and they said because it is so efficient, it just doesn't generate a lot of heat in the first place, and the large thermal mass of the motor helps spread the heat out

@1969barnabas

Жыл бұрын

The hub motors in the Aptera are liquid cooled.

@solexxx8588

Жыл бұрын

Fans use energy. Bouncing wheels are an energy eater. Unsprung wheel motors are not better. This is total BS.

@tedrice1026

Жыл бұрын

@@1969barnabas air cooling would cut the unsprung weight,

@1969barnabas

Жыл бұрын

@@solexxx8588 No fans. The Aptera uses radiant cooling in the skin of the vehicle to radiate the heat from the liquid cooling system into the air around the vehicle. I want to drive one before I buy one so that I can evaluate the ride quality... because the unsprung weight is one of my concerns.

The fact that so many engineering-focused KZread channels are so excited about Aptera says a lot

A typical 3,300 lb car has 4 tire/wheel combinations weighing about 50 lbs each, to which you add a portion of the suspension A-arms, etc. (front) and the braking system - use 50 lbs additional, for 100 lbs/corner, and you get a sprung:unsprung ratio of 8:1 for the front, and higher for solid axle rears. Much engineering goes into automotive ride quality to damp road-induced oscillation and impact. Here, you not only have a very light vehicle, but you are adding a 50 lb electric motor to the admittedly lighter tire/wheel combination, and some form of braking that may also be incorporated. It's hard to see how the ratio could be higher than about 3:1. Seems like it would jangle your fillings loose on a bumpy road. Add to that the fact that the motors would be banging around over every bump, imposing shock loads on the windings, bearings, etc. and you'd need mil-spec construction to survive. Just move them inboard and run a half-shaft to the wheel - problem solved.

@NAGIUXS

8 ай бұрын

They most emotionally invested fan and don’t or won’t see any issues with this vehicle. They don’t understand that they are not enough to bring this vehicle mainstream. The vehicle will sink like a stone without market adoption. As an investor I will enjoy the 2 to 3 year hype and be out has collector. Enjoy the ride and love the car for what it is, not what you want or hope it will be

No drive shafts also means bigger wheel steering angles are possibly

Thumbs up for proper pronunciation of Ljubljana :)

This reminds me of direct drive props on commercial vessels. Many ships have Diesel-electric drives with electric motors directly turning the props, which eliminates gearboxes, the size and weight of low-speed engines, and the torsional vibration hassles encountered on traditional Diesel-mechanical drives.

I've got a GMC Envoy XL with the healthy 5.3l V8, slightly modified to 350hp and slightly over 20mpg. 4wd isn't working, and I want 4x4, more mpg, and more power. After I buy my Aptera, I'll still need the 'and' rig for work, hauling, towing, which it does well. I'm thinking of making the Envoy a powerful Hybrid by going with these same motors in the front wheels of the Envoy after disconnecting non-functioning 4wd. Having the front electric system totally separate from V8 drive system with separate controls for simplicity, infinitely variable torque-split and vectoring, ability to go all gas, or all electric (for short spurts), or everything for mo powaah. Ability to use electric to boost mpg of I.C.E, or use I.C.E. in combination with regen braking to boost electrical range like Chevy Volt hybrid. Lots of room on floor for plenty of battery, and hood/XL roof for solar, to take from aptera's philosophy. But with hybrid, trailer-rippin practicality, why wouldn't this work?

Two unrelated thoughts. First, Elaphe is also the scientific name of a genus of rat snakes. Second, in-wheel motors are very cool, but no mention is made of the fact that they increase the unsprung mass of the wheels, which degrades the handling of the vehicle. Great in-wheel motors should therefore weigh as little as possible.

@gmy33

Жыл бұрын

Cars have heavy axles and hubs and tored .. so here there s no axle lightweight hub and tire plus much smaller lighter breaks are sufficient coause of regen ... so it actually weighs the same .. thats what i heard .. for bycicles its a different story .. for mopeds they do it all the time !!! Millions on the road with hub motors !!

Even with a conventional Ev design hub motors are a huge advantage because of the space you get back between the rear wheels, perfect for putting a large battery pack while still able to remain rear wheel drive.

One thing that really worries me about in-wheel motors is durability. With a traditional setup, with motor in a central location and connected to the wheels via shaft and CV joints etc, the motor is protected from road shock by the suspension, tires and everything else between the motor and wheel. But with in-wheel motors the only thing that absorbs any of that shock is the tire. I would think that over time this would put a huge amount of stress on the motors compared to non-IWM setups.

@n.brucenelson5920

Жыл бұрын

No. The Elaphe motors are fully potted to absorb repeated 100 G shocks. The wheels would likely be destroyed before damaging the motors.

@murraymadness4674

Жыл бұрын

@@n.brucenelson5920 Right, the are made so strong they can't be damaged. Those 20 year studies prove it, or wait they don't have those.

@n.brucenelson5920

Жыл бұрын

@@murraymadness4674 If you have something to contribute to the conversation, cite your own data. Misrepresenting what I said, and name calling isn't a contribution.

@MyFilippo94

Жыл бұрын

@@n.brucenelson5920I would like to hear more, are the motors heavier than needed as a result for making them as resistant to shocks? What kind of solutions have they applied?

@n.brucenelson5920

Жыл бұрын

@@MyFilippo94 Elaphe Motors considered using transverse flux and axial flux motor design, but settled on radial flux after evaluating all the pluses and minuses, including ease and cost of production. They would be lighter without the potting, but would not then be robust enough for the application. They have built and tested many prototype cars - more than 40.

I always thought the combination of in wheel motors and an easily removed battery pack would be the best thing for repairing and upgrading.

well i sure hope the wheels being made in Slovenia will help the Aptera make it to our market. i didn't realise they were made here.

That is the best explanation of why i need in wheel motor, thank you.

Michelin tried a very sophisticated version of the wheel motor (Michelin active wheel), with a very light motor rotating at high speed driving the wheel through a gear reduction: the road holding,with a active suspension, was satisfactory, but the assembly was very expensive and the lifespan was scaled down...

I'd love one of these. Their solar recharge matched with the low useage is a great match.

Very excited, and looking forward to getting one of these.

Have two Launch Editions on pre order and an Aptera stock holder as well. Go Aptera go! ⚡️

I'm from Slovenia and know a few people who work at Elaphe, great company, culture and people. That aside, I think in-wheel motors are a bad idea. Too many issues: unsprung weight, gyroscopic effects, high voltage isolation, cooling, mechanical shock, corrosion, lack of gearing, etc. Compare that to an inboard motor with CV axles (effectively 1/2 unsprung), and the inboard configuration wins every time. I wish the company well, but I doubt they have a future with these designs.

Excellent! I really do hope torque vector steering is a reality in the first production vehicles.

@kevinburke6743

Жыл бұрын

Torque vectoring has to be in line Exactly with Wheel Direction & Speed! At EVERY given instance! When a car is turning the inside and outside wheels are going around different but changing radii! Due to this is travel different distances! Lets take a simple 90 degree, right angle turn. You are driving along at an appropriate steady speed, & initiate your turn. You neither accelerate nor brake, the inner wheel needs to slow down by the same or similar amount the outer wheel need to speed up! Now as regards Torque vectoring, does this accelerate the the outer wheel & brake the inner wheel? Or does reverse Torque (regenerative braking) the inner wheel to to the correct speed compared to the outer wheel. Or does it do both? A Win Win or at least Brake Even! Every slight steering should matched by the appropriate Toque Vectoring. Don't forget you can Brake Torque Vector Unpowered wheels to give greater control! Speaking of Brakes, where do they go now that they have been made homeless by the hub motor? Please don't say in, on or close by the Hub Motor? Hub Motors & Brake Rotors don't make good bed fellows!

Another excellent video! Great research. Keep it up Brewster!!

Plus, it seems like fewer things to break down and easier to replace an in wheel motor if needed.

This is why I like seeing building a EV towards a set of constraints vs. trying to be a replacement for a do everything car. You unlock things like motors in the wheels.

@trazyntheinfinite9895

Жыл бұрын

Lets be clear here: in wheel motors are a thing since like 50 years. Its just that production cost and overall complexity have never put it in focus for mainstream production. The apterra is sized like a vw up, with none of the upsides but every single downside you get for basically driving a renault twizzy gone fat. Have fun dieing in it in a crash.

@annoyedok321

Жыл бұрын

@@trazyntheinfinite9895 And yet motors in wheels failed to become a thing 50 years ago. I don't think the Aptera is the perfect design for a EV, but I think vehicles like the Model 3 and Nissan Leaf are a poor implementation of their potential right now. A 2 seater commuter that ignores long range requirements in favor of balancing price/efficiency is a better goal than towing capacity. Removing rear leg room would be a boom for battery placement. While the interior space might seem small compared to the vehicle the reality is the main purpose is to move humans. Which in most cases is just one of them. As for safety it's considerably better than a motorcycle with 4 season potential. If the only way to fix a problem is to add more batteries, you will only make it worse.

@MotoxYT

Жыл бұрын

@@trazyntheinfinite9895 The design of hub and in wheel hub motors are not complex whatsoever in comparison to a mounted motor. Not only that, but you also don't need a complicated driveshaft to transmit the motor's output. The biggest issue of a hub or in wheel hub motor is unsprung weight.

This car really carries the ethos of the G1 insight! Concerned about increased unsprung mass with those in wheel motors, but using lighter materials throughout would absolutely help, as would shocks with aggressive valving or electronically controlled variable valving, along with some good programming.

All I need is some IWM that I can install on my 2wd 4Runner to make it a 4wd Hybrid 4Runner.

I've had mine on order since just after their restart. I so can't wait for mine 😮

These will make a great add on to front wheel drive cars to give a little boost to MPG of gas. Allowing us to transition from one to the other gradually, instead a over night switch. Which will never happen.

@rajgill7576

Жыл бұрын

That's a good point. If there was some way to retrofit your current gas car to become a hybrid I could see a lot more people switching over.

Mechanical engineer here. I used to design concepts for top secret work, some including advanced electric drives. This team took a system approach like we used. It is brilliant, IMHO. I would love to own one, or own some stock, but I am getting too old.

@viennois0123

4 ай бұрын

Others will pick up where left. The passion and the need has arrived.

would love to mount one of these wheels on my wheelbarrow. seen people use bicycle motors etc, but this would be next level yard mastery! Rider tractors and side by sides too, really grat concept. Hope it all comes together in a slick retrofitable packedge for legacy applications. Visualize the flying cars in "Back to the Future"....with all the obviously new, tech gear and bits bolted on the inside/outside of a 30 yr old rebuilt vehicle.

@punkdigerati

Жыл бұрын

Grin technologies has a kit for just that, or you could take your chances with ebay Chinese kits.

@frosthoe

Жыл бұрын

@@punkdigerati TY for the tip.

@LouisSubearth

10 ай бұрын

Scooter hub motors may fit wheelbarrows

I did not see any comment on the potential issue of having the brakes inside the electric motor. On one hand the motors need cooling to operate well. On the other the brakes are putting a lot of heat into the pods.

Finally in wheel motors on the road.

Love all the advantages and the efficiency of in-wheel motors! Pre-order holder and small investor who can't wait to be behind the yoke of a new Aptera!!

It also moves the weight to the edges of the car improving stability and possibly ride smoothness.

@jerrylove865

Жыл бұрын

Moving the wheels out does add stability; but because the wheels are more massive now, and because the wheels must move when the road forces sit, you have a larger mass being tossed around. So you have a choice. You can move all that extra kinetic energy into the car body (so rougher ride), or you can slow down the suspension (resulting in much worse handling).

@leneanderthalien

Жыл бұрын

Smoothness? i dont think because unsprung masses did increase the inertia who make bounce the wheels and so degrades road holding...In wheel motors are not a new idea: the first known car with such motors was the Lohner Porsche 4 wheel driven electric car from... 1899! Motor wheeled vehicles (electric or hydraulic) are very common but only use in heawy and slow vehicles like construction machinery, mining machinery, handling machines like boat moving,etc...

Well done. Great product.

in wheel motors eliminate the mechanical joint losses thus improve efficiency . In other words it contribute to energy savings as well. The bad side is it is prone to breakage through harsh road condition such as pot holes and rough roads where the most damage sustain would be the bearing itself

The tires they show in the animations seem to have a tall profile. Which makes sense if your unsprung weight is very high.

The space use advantages granted by removing motors from the vehicle's main body are squandered by unnecessarily limiting the interior volume. There would be some drag cost to extending the sides of the vehicle to the outer reach of the wheels, but the vehicle would serve a greater proportion of practical use cases. The market would be broader if the Aptera could reasonably serve as an only vehicle.

@n.brucenelson5920

Жыл бұрын

Aptera will serve as our only vehicle, and will meet the needs of many retired people. Our Gen 1 Honda Insight serves well now, and Aptera will improve on its performance in almost every respect, including carrying capacity.

I wonder how much effect there is on ride comfort and noise with the additional unsprung mass of the of the hub motors.

@1969barnabas

Жыл бұрын

Exactly what I'm thinking. The un-sprung weight is my only concern about the Aptera. I want to drive one before I commit to buying one. Does anyone know how much these particular hub motors weigh?

@niconico3907

Жыл бұрын

The video doesn't address this concern. Every technical choice is a compromise between multiple qualities. No choice can be all good and no bad. So this video is missleading.

@bradley3549

Жыл бұрын

I think it's a fair question, but on the other hand I think it's something that matters less than you might think. The unsprung weight of an Escalade is huge compared to a compact car, but nobody would claim they ride poorly I don't think.

@niconico3907

Жыл бұрын

@@bradley3549 its the ratio between unsprung mass and sprung mass that is important.

@bradley3549

Жыл бұрын

@@niconico3907 I agree and that's my point really. BEVs are relatively massive for their size, generally speaking, so an increase in unsprung weight may be less significant in the grand scheme of things, IMO.

Future electric and hybrid should use such wheel motors, made of lightweight durable materials, electric bicycles, scooters, all of them on motor wheels, and cars will also come to this.

What is the best in-wheel motor for a cargo bike that will be pulling a trailer as well?

I'm just waiting for my Aptera.

I have had experiences from hitting potholes where it knocks out motor and then you wind up getting a whole new wheel motor. That costs $500 or more and that’s too much. (here’s question) Does these wheel motors work without being knocked out constantly because of potholes?

Can tire chains be installed on the Aptera when the front tire cover is removed?

We need more electric vehicles with in wheel motors

It all boils down to efficiency vs. maintainance cost.

Thanks for this useful information on it’s in wheel motors. I have just had to guess that they were efficient before. Now I know a bit more about them. I am around 7500 in line and am scheduled for a 400 mile range vehicle. I’m getting the full solar package and have designed a independently solar powered car port to keep the thing in. Looking forward to late 2023 delivery. Right now my only concerns are repairing and how comfortable the Aptera is. Thanks for a very informative video.

Look like it is light enough for hovering accessories or flying module maybe greatest because the body is suut for inlet air to lift it into fly or above ground

I love all these busters that come straight out with the unsparing weight thing which isn’t a thing except for busters looking at specs on paper. I want this aptera vehicle now! Until then I’m gonna get 2 more hub motors for my Renegade , for the two rear wheels and and a trunk full o batts and I’m gonna drag race all the busters in San Diego.

@ATEC101

Жыл бұрын

Can I plow into your Aptera with the 80,000 lbs of semi-truck I used to drive? It will only be at 25mph, just a gentle kiss.

@Wheelieking619

Жыл бұрын

@@ATEC101 you are a true skid master.

@martinblank1484

Жыл бұрын

@@ATEC101 Ah yes, the chicken shit argument. Well played. 🙄

Torque vectoring is not an in wheel motor only feature, ICE cars have had that in the form of limited slip differentials since before the people at aptera were born. As to the other performance, I want to see the laguna seca or Willow Springs lap times for this compared to a chaterham which has the same weight and power output

@n.brucenelson5920

Жыл бұрын

True, but these devices consume power in increased friction and heat, unlike the wheel motors.

@pogo1140

Жыл бұрын

@@n.brucenelson5920 not enough to matter. And they will last the life of the vehicle as long as you replace 3 oil seals and the oil every 5-10 years

@n.brucenelson5920

Жыл бұрын

@@pogo1140 The small losses from the differential and drive shafts are quite significant for a vehicle as efficient as Aptera is, especially when considering that we are trying to maximize the solar contribution to range.

@pogo1140

Жыл бұрын

@@n.brucenelson5920 so you have a 110 hp motor sitting in an isolated dry box vs 2 50hp electric motors bouncing up and down with just the tires to protect it.

@ernestgalvan9037

Жыл бұрын

And of course a Chaterham and Aptera are identical in design language, use case, and owner demographics. 🧐

Game changer! Id buy the 400mi one. It would be amazing to have solar at your house and just power this thing off solar energy. Im surprised the government is allowing this lol.

@theproffessional9

Жыл бұрын

The Aptera actually has built-in solar panels so you probably wouldn't even need a house Charging set up if you don't drive more than maybe 30 or 50 miles a day.

@willburk

Жыл бұрын

I think you mean 2-5 miles a day...

@WilliamTythas

Жыл бұрын

this will also require a motorcycle license because there is no way that would pass a US automobile crash test

excellent ! so Slovenia is noteworthy not just for its stunning nature and angling. any thoughts on suitability of these motors to convert a classic car into a cool EV ? would free up extra space for batteries and the motor part of the transition would be a breeze.

@KingClovis

Жыл бұрын

That's exactly what I was wondering!Not just classic cars, but any lower-weight car that blew it's engine...

@justforthehackofit

Жыл бұрын

@@KingClovis I checked - for now, they only supply OEM's, not private customers or small accounts, regretfully. Lightyear is also working with them (they claim a 97% efficiency on the motors). Didn't find a price anywhere.

@n.brucenelson5920

Жыл бұрын

@@justforthehackofit Aptera charges $2500 for the third motor, which may give a hint.

@KingClovis

Жыл бұрын

@@n.brucenelson5920 Well, they'd have to get that price per wheel a little lower for it to be econimically viable. I would think you'd two wheel/motors at least, plus the batteries. It would be interseting to compare that with replacing an engine in a used car...

@chuckmakesit

Жыл бұрын

I've been considering that possibility. One issue I thought of is the hub motors limits compatibility with wheels. A lot of classic cars have fairly small wheels in comparison to modern cars. Even if you put low profile tires on there could still be clearance issues to contend with. Also there are aesthetic considerations. Aptera is completely hiding their wheels so they don't have to look pretty, but a large part of the experience with classic cars is how they look. Using hub motors will also likely require reengineering the suspension. Likely requiring custom fabricated parts to attach to the car. Also concerns of changing the car's balance and driving charactistics. None of this is a deal breaker, just factors to consider

I love the idea of the M will Motors always have my question though is this is unsprung weight therefore the motors are going to experience every vibration and every jolt from the roadway how's that going to affect their service life and efficiency and stability of power?

What if I attach these to a fwd car. Put Aptera on the rear wheels. Since car is at 380lbs of torque. This could help the car grip on a luanch vs front wheel skidding for traction

Please tell more about the motors / cruise control keeping the vehicle in lane without input from the steering yoke. I'm curious about the lane control / adaptive cruise control. What does the $1300 get me?

@InstantTorqueYT

Жыл бұрын

The company can't really speak to it yet officially because it's too early, but right now they are looking at comma two and comma three from Comma AI. Check out Cyber Owner's channel for more on that.

Well, if just the hub motor replaced the wheel structure itself, and they should distributed the unsprung weight in four smaller engines, one in each wheel of a car, wouldn't that help?

I have been shaking my head since the boom of electric vehicles have not included hub motor equipped versions. It seems to me - and I am far from an automotive engineer - that if you used a hub motor (or IWM as you call them) on all four wheels you could then use a computer to distribute power when and where needed. If you are easing down the autobahn then only one of the motors would be needed. If traction becomes an issue, all four could be used. (or any combination of them) The ECU could even use the motors to yaw the vehicle if needed. So many possibilities! Whenever I have asked why hub motors are not used the answer I consistently receive is "too much unsprung weight" ...It seems that the benefits outweigh the negatives in this case.

@edwinbuck1854

2 ай бұрын

I'm not an automotive engineer either, but when I was younger, I was interested in racing. I read a few books on how to become a better (race) driver. They covered suspension a lot, and a lot of racing is understanding how to use your suspension in ways that don't slow you down. If you want good suspension performance, the last place you want weight is in the wheels. Lighter wheels can react to irregularities in the road faster, by having less mass for the car's spring to overcome (the spring is responsible for pushing the wheel back down to the road). There's a lot of other items that are impacted (spinning something heavier takes more energy, etc.) but the suspension issues are what typically leads to in-wheel motors only being used on prototype cars (because in-wheel motors ARE cool) or heavier production trucks (because the wheel to body ratio of weight is still low when the body get much heavier). That's why people (ok some people) routinely pay $1300 for a set of wheels that reduces the weight in the wheels by about 12 lbs. You can immediately feel the difference, and in racing your track times will improve even if your driving doesn't. To get an idea of how much people will pay, Corvette has a set of wheels for about $12,000 to $20,000 that are 100% carbon fiber and reduce wheel weight by 41 lbs. There's an entire market for lighter disk brakes, disk brake calipers, suspension arms, etc. Lordstown Motors (defunct) produced the Endurance (about 50 to 100 vehicles). Their additional wheel weight due to the motor was reported to be 85 lbs per wheel. Nobody said anything nicer than "ok", "boring", or "passable" about it's ride quality. The way this weight is measured is in a ratio to the car's overall weight. Bits of the car not supported by the spring comprise "unsprung weight". A typical car has a unsprung to total mass ratio between 0.12 and 0.15. Assuming a 75 lb motor, and an additional 100 lbs per wheel of suspension, that's 525 lbs of unsprung weight, which would be comfortable with a 3,500 to 4,375 lb vehicle. There are tricks than can improve this, but they are generally avoided because they impact the car's ability to corner or add even more weight in the wheel. Heavy wheels also mean more tire wear, as the tire itself flexes more when it can't bounce upwards as quickly due to its mass. A better approach would have been to use near-Wheel motors (placing the motor outside the wheel, which provides a lot of benefits, like less motor vibration, leading to smaller bearings, leading to reduced weight, and no constantly flexing (bend it till it snaps) high voltage electrical cable going into the wheel. The REE P7-c does this, but it's a production box van chassis

Any towing options (like bikes)?

love the idea! are the already manufactured to buy ?

I wonder if in wheel motors are a good way to add 4wd for when you need it?

@vcdrny

Жыл бұрын

This was 3 years ago. It seems that it didn't catch on. It would've been cool to add AWD to any car. kzread.info/dash/bejne/m4VozraJhrWZocY.html

@solstar4778

Жыл бұрын

3 wheel drive not 4 wheel drive , there is only 3 wheels !

At least they didn't call it full self driving and actually call it level 2 autonomy at the start

Curious about the additional work the suspension has to do given the increase in sprung weight (if I'm getting that correct) of the wheel plus in wheel motor. Is that a relatively simple engineering problem to overcome? Does the ability to apply power directly to the wheel/wheels reduce the potential negative effects on directional changes?

@jerrylove865

Жыл бұрын

Close. The mass on the wheels is "unsprung", because there's no spring between it and the road. It means that you have more mass jumping up and down; which results in some combination of the wheel not touching the road and/or the car lurching about. It's one of the reasons that basically no one does this.

@n.brucenelson5920

Жыл бұрын

@@jerrylove865 The fact is that there are many vehicles on the road now with wheel motors. It is only recently that the tech has made them more available at a competitive price. Proper suspension design has been able to control steel wheels with the 50 lbs the Aptera wheel motors weigh for decades.

@pdloder

Жыл бұрын

No, increase in 'unsprung' weight.

@allangibson8494

Жыл бұрын

@@jerrylove865 Actually wheel motors are becoming increasingly common in lower speed vehicles like trucks and buses - because it significantly reduces drive train space (that can then be filled with batteries instead).

@jerrylove865

Жыл бұрын

@@allangibson8494 "lower speed" being pretty significant here. The requirements on the suspension are lessened at lower speeds. Also: It's a mass competition between the sprung and unsprung portions of the vehicle. On a more massive vehicle, you can get away with more unsprung weight.

2 concerns I have is; extra shocks to the motor on rough terrain. And how that amount of unsprung weight will affect the ride and handling.

@strictnonconformist7369

Жыл бұрын

The shocks to the motor and how that affects wear seems like the bigger issue, if you can get the unsprung mass of the in-wheel motors low enough to not be a big deal. Perhaps nit having the additional drivetrain to deal with easily makes up for the unsprung weight handling issues in practice.

@eelcohoogendoorn8044

Жыл бұрын

A direct drive motor doesnt really have anything sensitive to shock loading. As long as the bearings are up to the task, all else should be fine.

hola se venden estos motores universales ? para adaptar en autos ?

In wheel motors must be a trade off with unsprung wheel weight. Also the three wheel design ( great only on smooth roads ) would find it difficult to navigate the 1km track ,into the farm where I work.

The main problem is micro particles, like dust and water.. good luck

@n.brucenelson5920

Жыл бұрын

Aptera Elaphe WMs are fully potted.

Il you be having your product exhibited in recent May 2023 Yokohama Auto Engineering Expo in Japan ?

High currents inside the motor at low speeds and high torque could reduce the durability of the motor. The motors might be inexpensive enough to make it a good choice anyway.

....⚡>> IWM

Driving on snowy highways will hell in this car

@n.brucenelson5920

5 ай бұрын

I live in Iowa. The fast reacting traction control lessens my concern I will report on my experience.

Is this available to buy for DIY projects ?

It would be great if i could have electric wheels on the front and keep the factory driveline in place for the rear of my 2x4 hilux. Then I'd have a plug in hybrid and I don't have to upgrade my car

@allangibson8494

Жыл бұрын

There is a company in Australia building electric 4x4 Hilux utes - they buy the rolling chassis off Toyota.

Amazing car.

Are there plans to deliver to Australia?

I bet an axial flux motor would be a good application for in-wheel motors to minimize motor mass.

IN A lot of states, a three wheeled vehicle is considered a motorcycle and many states have mandatory helmet laws for motorcycles.

@rajgill7576

Жыл бұрын

Yea, I rented a Polaris slingshot once. Surprisingly, California is NOT one of the helmet requiring states

@RussellNelson

Жыл бұрын

Yes, but autocycles are a different breed, and they are starting to not require helmets for them.

@n.brucenelson5920

Жыл бұрын

I think AK is the only state left that requires a helmet.

What's the tire rotation protocol for an aptara?

Basically they save weight and costs by eliminating the differntial mechanism, the driveshafts, lubricating oil, etc. Unfortunately 3-wheels vehicles have less stability in long turns at high speed. I would increase a lot the wheels diameter to reduce the stress of the tires in such conditiion.

I would wait for the one they have coming out soon that is able to fly as well, cost is higher.

Thank you for the thank you 🤣🤣

I really like the idea of in wheel motors. Most modern cars are pretty damn efficient when driving at highway speeds, if electric motors could pick up the in-between it would remove an inconceivable amount of idle pollution, without trying to convert the entire world to a solution we only have the means to provide to less than 10% of the population.

One benefit of replacing Aluminum or steel wheels with carbon fiber is a reduction in un-sprung weight, giving a vehicle a number of performance advantages, well in ICE vehicles. I suppose the instant application of torque negates some of these advantages where rotational acceleration is handicapped by extra mass. I also suppose torque vectoring substantially negates many downsides of the extra un-sprung weight. How is the Aptera on bumpy, potholed streets? I doubt torque can help at all here and this requires significant refinements in spring rates and dampers. I look forward to seeing hiw different this tech will feel while driving.

Im ready.

OK I want to explore Front Wheel EV for my big fat American Car. When can I get prices on a complete retrofit kit and what ranges of HP and Battery can i get? I see this a great time to go AWD Hybrid with vehicles that are still in good condition but are Front Gas Engine Rear Drive and have space for In Wheel Motors and a few Batteries. Please let me know your status for the US. Dennis

@DennisMurphey

3 ай бұрын

Not getting any feedback on Elaphe motors in the US? One comment stated unless you are Vehicle manufacturer we can not support you! Well, we want to be a AWD Hybrid retrofit supplier to purchased vehicles commercial and personal vehicles. We can't even complete an adequate business plan with so little input from Elaphe? When will we get Support in the US Business Development. Rumor are out that the motors don't work which must be sour grapes because so few have seen one in action.

@edwinbuck1854

2 ай бұрын

@@DennisMurphey The main issues would seem to be that a simple conversion would most likely fail. You would have to rebuild most of the suspension arms to hold the hub (in-wheel) motor, and you would have to have enough design experience to build a high voltage wire that could bend repeatedly over the life of the vehicle without metal fatigue breaking it internally. And then, you would also have to have a multi-wheel motor controller, with safeguards should a single wheel motor fail. Finally, the in-wheel motors generate a lot of heat for the small space they are in, that typically means a liquid cooling system that again crosses from the wheel to the body, where larger radiators can be installed, or attaching passive heat sinks to the motors (which don't work well when the wheel isn't spinning fast enough to get forced air convection. Finally, the unsprung weight will be high, about 75ish to 85ish pounds greater per wheel. Considering it's about $1300 to reduce 12 lbs of unsprung weight by buying alloy rims, the work to retrofit the typical american car might make the project look more like a P1800 Cyan price range than a P1800 vintage price range, unless you just throw ride quality out the window. Still, I want to do the same thing, despite knowing too many engineers that tell me all the issues. :)

They need to 'stretch' the Aptera to make it a 4-seater. Use the extra under-seat area for batteries to maintain the range.

if not hub electric motor wheels, then try magnetic lock clutch (clutch + axle lock)

The biggest reason to use these would be to retrofit other vehicles. Keep the gas engine for reliability, you don't need a big battery if you have a gas tank

@nordic5490

Жыл бұрын

No. The brakes have to go somewhere.

Vulnerability to environmental contamination (I live near Buffalo, NY!) And impact/vibration with mich less suspension isolation are of concern

Does anyone know whether the Aptera will have heating capability for the pack?

@rajgill7576

Жыл бұрын

For the battery? Probably not.. EVs are not cold weather friendly just yet

@MrNicholasAaron

Жыл бұрын

@@rajgill7576 My Tesla Model 3 is great in winter. It does lose some range in our Winnipeg cold, but if you have enough buffer that's not a problem. If it didn't have a battery heater the pack could get too cold to produce much power at all.

@n.brucenelson5920

Жыл бұрын

Yes. The Aptera battery pack is liquid cooled and heated by an antifreeze loop.

How susceptible to vibration damage due to bumpy roads or pot holes are the in wheel motors?

@n.brucenelson5920

Жыл бұрын

I have been involved in building electric motors for use in seawater. The motors are completely potted in a shock absorbing, rubbery compound that can absorb over 100 Gs of shock. I had a conversation with Elaphe engineers about this and am convinced they know what they are doing here.

How to you replace tires?

I'm excited to see it live, but not too excited to plunk down moolah

I Guess they biggest disadvantahe of three wheel is potholes, harder to evade

Aptera....Add one more wheel and I would buy one.

@rajgill7576

Жыл бұрын

I think the ceo plans to make his second model a regular 4 wheel car but keeping the same efficiency, repair and upgradeability etc

In general, the heavier the electric motor, the more power it can handle. Unfortunately for direct-drive (non-geared) hub motors, that means a powerful motor is working against the suspension as unsprung weight. I like this car, but I'd personally rather see them ditch the hub-motors in favor of two on-board motors w/ drive shafts. I also don't see much benefit to offering the rear-wheel being driven.

i'm glad other people have pointed out Unsprung Mass, but i'm more concerned about high speed torque, as electric motors are famous for smoking anything for the first few seconds in a drag race, but struggling at high speeds after the instant torque is gone. is Elaphe using gearboxes somehow in their hub motor? a fixed planetary gear set maybe? if not, how have they managed to keep performance and efficiency high at high RPMs?

@JohnR31415

Жыл бұрын

Torque is still there at speed…

@xymaryai8283

Жыл бұрын

@@JohnR31415 not as much though, Tesla gears up their motors to get better perfornance at high speeds.

@n.brucenelson5920

Жыл бұрын

@@xymaryai8283 Gears rob efficiency through added friction. Aptera's wheel motors put more of the available power on the road where it does useful work, and avoids unwanted heat and increases range.

@linusa2996

Жыл бұрын

@@n.brucenelson5920 Translation, all the acceleration is in the first 2 seconds after that it drops. It's why the 911 would lose to the Tesla S at the 1/4 mile but the Tesla would lose at the 1/2 mile and by 1 mile the 911 already past it and was still pulling away from it.

@n.brucenelson5920

Жыл бұрын

@@linusa2996 0-60 times for the 2 motor version is 5.5 seconds and 3.5 for the 3 motor. This is absolutely amazing for what is designed as an economy car. Even the slow one matches Ford Mustangs.

How is the crash ratings?

So what about driving comfort at high speed? The rotating mass of the Motor has no shock absorber and will be rattling and shaking ! Some people will say that’s the price of pioneering, but most people will not buy the product.

Three wheeled vehicles tend to be more unstable when there is a single wheel at the front and 2 at the rear. The Aptera layout is like the famous Morgan three wheeler which I don't think has ever been described as unstable.

@theinspector1023

Жыл бұрын

One at the front and two at the back tends to be more unstable: a) Because the weight distribution of this configuration tends to be unfavourable (ie substantially more than, say, a third of the weight over the single wheel). b) Ordinary drivers tend to brake in bends and with the weight transfer, both longitudinal and lateral, that is inherent with braking in a bend and that is when this arrangement is particularly unstable. The 'Nissan' Delta racer has a very narrow front track, but is driven by a racing driver who is less likely to brake deep into a bend, has a much more favourable weight distribution and can be booted early on the exit, although it must be a bit power-on oversteery (!) with the rear end providing most of the roll stiffness.

@rajgill7576

Жыл бұрын

@@theinspector1023 the deltawing cant tip because of design geometry and rear weight bias. Not to hate I bet the driver is fantastic, but I think they made it ohysically impossible to tip if you're braking too hard in a corner. Sometimes you have to do things like that in a race

@NAGIUXS

8 ай бұрын

The Morgan has never been popular either, it’s a niche vehicle just like the aptera.

should be more popular by now, most people just wants to go point a to b with their cars. most of the weaknesses of in-wheel can be reduced with larger wheel sizes.

@linusa2996

Жыл бұрын

larger wheel = more weight.

Maybe with smaller motors there would be less unsprung mass.

@n.brucenelson5920

Жыл бұрын

I believe the Elaphe WMs designed for Aptera weigh around 50.7 lbs.