Just a minor correction, the pixel size is in um or micro meters. Nanometers are 1000x smaller and are close to the size of atom scale.

@ElevatedSystems

8 ай бұрын

Oops, that's more than a minor mistake ☹️ Not sure why I didn't catch the fact that a pixel isn't half the with of a human hair.

@amraniabdelilah6662

Ай бұрын

My friend, what printer do you recommend for my dental laboratory? I want one that combines power, ease of use, speed, and accuracy

I'm looking at getting the Mono 6Ks - one big pro thats not mentioned here, Anycubic printers allow you to test multiple exposure settings in one print. That is, you can print 8 calibration models at various exposures in one go!

Nice to see you well again! Thanks for the great content as always!

I've been watching you for about a year now. In my opinion this is the most underrated tech channel. Keep up the good work!

The resin pump on the Halot Mage Pro is like a well-behaved genie - it grants my wishes without the mess. A must-have feature!

Super useful, thanks

The resin pump on the Halot Mage Pro is a lifesaver for loading resin. No more spills - just smooth and efficient printing.

Thanks so much for this in-depth comparison as I'm tossing up buying either the Creality or Anycubic printer. I have a traditional 3D printer but am only now venturing into resin printing so your straightforward, non-tech explanations help immensely... though I'm still tempted to buy both just because... ;)

The Halot Mage Pros early bird price had me sold. Its a real bang for the buck, and Im eagerly waiting for my confirmation email.

Super love your video!

thanks for sharing!

Overall, it looks like a fantastic printer for both beginners and experienced users. Im seriously considering getting one!

I recently upgraded from the PhotonS to the Mono X 6Ks. The fine printing is way better than I am use to. However, the are things I love the PhotonS and wish the 6 Ks had. I may be getting a little picky, but here are the things I think the older PhotonS was better with over the 6 Ks: 1) The PhotonS had the square arm bar. I could the build plate 90 degrees and put it back on. This let the extra resin on the build plate drip down(fairly fast) into the resin pan. You can't do that with the 6 Ks. Maybe I can make an arm attachment to do this again. 2) The 6 Ks build plate top is fairly flat compared to the PhotoS's. The steeper build plate top on the PhotonS helped the resin drip off into the pan below. 3) I miss the three fixed sides and lift-up front on the PhotonS. The 6 Ks top has to be set aside somewhere and I don't have a lot of room. 4) The resin pan hold down screws on the 6 Ks are a pain, since you need to completely unscrew them to get the pan out versus just loosening them up on the PhotonS.

Hello I bought a 6ks and was wondering what slicer do you use? I've tried the photon workshop and chitubox but both crash while saving the sliced file and just wanted to know

I started with the Creality LD-002H and then a Halot One, but I ran to the Mono 6Ks when I moved into a larger format. I've had success after success with it for both minis and functional engineering parts. And, I chose Lychee and opted for the Pro license to get access to all of Lychee's advanced settings. You're right about both being great, but I just didn't have the room for something as large as the Mage 8K. My go to resins are Anycubic and Siryatech.

@TheCalaudio

5 ай бұрын

Haven't you had problems with lychee in 6ks? I don't like workshop very much

@RocktCityTim

5 ай бұрын

@@TheCalaudio No problems at all on any of my printers - Resin or FDM.

Printing with the Halot Mage Pro has its software quirks, but thats a small price for the exceptional print quality it delivers.

always satisfy with my ender 3v3 se, as it can provides all I needs. but I think the Creality Halot mage 8k can be my next advanced one.

Size does matter, and the Halot Mage Pro proves it. With its impressive build volume, I can dream bigger and create larger.

Im a fan of Creality and I have to say that Halot Mage Pros hardware features are real winners. The carbon filter and resin pump add practicality to the printing process.

Got our first Bambu P1S 3 weeks ago … currently waiting on the second one to arrive & ordering 2 more in a few weeks! Love this thing!!!

My friend, which printer do you recommend for the dental laboratory?

Just picked up the halot mage 8k for only 200 from amazon. I was just seconds away from buying the anycubic 6k for 270 when I saw it and with a discount code I found online I got the creality large cure and wash station too. All in for only 350. Cant wait for them to get here.

@onemansvideos2134

8 ай бұрын

You get those yet I'm looking to get the same combo

@dannonyogurt98

7 ай бұрын

@@onemansvideos2134 Yeah but I haven't had the chance to use them yet. Look nice and feel good though. I looked around a lot and I don't this you can do better on the price to quality unless you go to a smaller screen. I am used to FDM printers so 10 inches or more for resin was a must.

@IronicAsAlways

6 ай бұрын

How's it going? I'm stuck between these two.

Elegoo 4mars max or anycubic photon mono x6ks?thanks

My Ender 3 has lost its luster and I've been looking at new printers. Resin's mess is still a little offputting but I think if the Creality one drops in price over the Holidays, I'll grab that and give it a try.

@khriss556

7 ай бұрын

Guess what? The creality one's dropped in price. By a LOT.

Despite software hiccups, the Halot Mage Pro shines with its print quality. Its a true champion in delivering intricate details.

So happy to hear that Creality is reducing prices during the holidays. I gotta buy k1～

@onemansvideos2134

8 ай бұрын

Same I'm waiting on my combo

Have the Halot Mage… at first I was frustrated by print errors… but once I started using the Halotbox slicer and changed a defective FEP… it’s been phenomenal

@M4r11on

7 ай бұрын

i got some jelly resin on VAT ?

@foam27

6 ай бұрын

huh?@@M4r11on

The Crealitys 8K screen makes textures, details, and minis pop with stunning clarity

Crealitys Halot Mage Pro takes SLA printing to new heights. Easy setup, minimal fuss - just what I needed in a resin printer.

I took the plunge and got the Halot Mage Pro - what a steal! Its specs are impressive and offer more value compared to other popular printers.

From miniatures to busts, the Halot Mage Pro delivers stunning results. Despite some software issues, its a resin printing powerhouse.

Im loving the compact design of this Creality halot mage. It wont take up too much space on my desk.

Halot mage pro is amazing! It gets me how a flat or supposed flat plate can look like this.

what was your MOS bro beans?

@ElevatedSystems

8 ай бұрын

11B for 1yr, > 13B for 4yrs, > 68S for 16yrs.

8:42 hey give me my PS4 back

Guys, run from halot mage. !!! i have one.

@IronicAsAlways

6 ай бұрын

Uh ohhhh, why is this? I'm trying to find one for my preteen kiddo. Scared to buy a hunk of junk. 😢

@rodolfo_23

6 ай бұрын

why?

Creality wins~

Its not suprise for halot mage is the best seller in Amazon for its affordable price and amazing 8k tech....

Those carbon filters only remove odour not all the dangerous volatile organic compounds that are hazardous to health. So not much of an advantage one printer having one.

@ElevatedSystems

4 ай бұрын

Then how would you explain the carbon filters in my Niosh certified respirator? Activated carbon does remove VOCs. You’ve been misinformed.

Creality sure loves making sure you know your printer is turned on

So. How big can you actually print with this printer? Does it all depend on how you cut and slice your model??? whats the biggest anyone has printed with this particular printer?