Why and how I modified wireless subwoofer to wired?

Ғылым және технология

I received from a friend a wireless subwoofer and made it possible to use it in usual wired connection.
model:JVC th-wl707h
ic for receiver:GVK5NO
ic for sound processor:STA369BW
Recycle and be creative!

Пікірлер: 45

  • @joevargas5505
    @joevargas55053 жыл бұрын

    hey that was pretty cool. ive been thinkn doin this to one of wireless subs or vice versa with a wired to wireless & this vid helped me out; thank you! but in other words u did very good job buddy keep up the good work!

  • @diymariuselectro

    @diymariuselectro

    3 жыл бұрын

    thanks man,recycle and be creative :)

  • @MickV13243
    @MickV132432 жыл бұрын

    Thanks for the video. Does your new sound processor module that you put in not have a crossover? It sounded like it was trying to play full frequency range audio instead of just the low frequencies?

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    yes u r right.I didnt put low-pass filter because I use subwofer output and dont need.

  • @MickV13243

    @MickV13243

    2 жыл бұрын

    @@diymariuselectro Ah ok makes sense, thanks

  • @francisanderson2746
    @francisanderson27462 жыл бұрын

    I found a Sony Sub in the neighbors trash... I have an existing wireless Samhsung sound bar. Do you have any insights to share, for making the two different brands pair?

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    I tried to pair mine,but dont succed.its not standard bluetooth its proprietary standard.i believe that u cant pair them,but u can check the receiver and emiter chip and try anyway.

  • @samsen3965
    @samsen39652 жыл бұрын

    Brilliant. You have a new subscriber.

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    I hope that u find more interesting videos on my channel.

  • @GeoBass-89
    @GeoBass-89 Жыл бұрын

    Buna treaba cu DIY yourself. fac acelasi lucru si eu. o intrebare: cu ce aparat filmezi?

  • @diymariuselectro

    @diymariuselectro

    Жыл бұрын

    pe moment filmez cu telefonul.dupa ce canalul o sa creasca,o sa imi iau si scule profi.

  • @GeoBass-89

    @GeoBass-89

    Жыл бұрын

    @@diymariuselectro mai exact ca ma intereseaza modelul. imi place cum inregistreaza si sunt curios ce telefon este firma\ model

  • @esmokebaby
    @esmokebaby2 жыл бұрын

    I want to make my samsung wireless subwoofer pswe450 have a new better amp and subwoofer and keep it wireless to the bar do you think it is possible?

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    theoreticaly its posible if u keep the audio signal receiver,but in my case volume and bass adjust were digitaly made in audio amplifier chip.I would not do this.

  • @esmokebaby

    @esmokebaby

    2 жыл бұрын

    @@diymariuselectro ya so sounds like it is too complicated than the worth of doing it as it would probly disrupt the sound quality of the bar due to the sub not being tuned and probly too loud to the soundboard

  • @esmokebaby

    @esmokebaby

    2 жыл бұрын

    @@diymariuselectro actually wounder if I put sub signal to a high low converter if it would work that way for fun

  • @mouhamadsaidomar4609
    @mouhamadsaidomar46092 жыл бұрын

    Bonjour, J'ai un subwoofer LG model S55A1-D mais j'ai pas le barre de son. Comment le faire fonctionner ou comment modifier le subwoofer Bluetooth en enceintes filaire? Merci

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    pls translate to english.my frech is not very good.

  • @mouhamadsaidomar4609

    @mouhamadsaidomar4609

    2 жыл бұрын

    @@diymariuselectro Sorry I said that, I have an LG model S55A1-D subwoofer but I don't have the soundbar. How to make it work or how to change bluetooth subwoofer to wired speakers? Thank you

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    @@mouhamadsaidomar4609 u can do exactly what I did with mine.exchange amplifier board inside.

  • @JO_Artificial
    @JO_Artificial2 жыл бұрын

    Hello, this is wonderful, I have a JBL 2.1 subwoofer, I never got to use it as the bar was stole at the airport, I want to make it wired like you did here, please give me some advice.

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    You have ti find service manual and then make input conector.Like I did here.

  • @poohtianaman

    @poohtianaman

    2 жыл бұрын

    Can it be paired with a different Bluetooth speaker? Just received tge subwoofer yesterday from a friend without the soundbar

  • @FutureRefrence

    @FutureRefrence

    5 ай бұрын

    @poohtianaman this would more than likely require some sort of firmware manipulation or hack. If you can do that then anything is possible

  • @FutureRefrence
    @FutureRefrence5 ай бұрын

    Couldn't you get the same result by wiring an input jack directly to the speaker's wire terminals?

  • @diymariuselectro

    @diymariuselectro

    5 ай бұрын

    I need active subwofer,not pasive subwofer.

  • @handmade_by_woodipedia
    @handmade_by_woodipedia2 жыл бұрын

    Salut ! Mai pot face ceva cu un soundbar al carui subwoofer mi s a stricat ? Nu as vrea sa renunt la el pt ca nu este tocmai ieftin. Ms

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    poti face multe.poti sa il repari,sau poti sa tragi la el un subwofer prin fir.pt inceput verifica ce s-a defectat.

  • @handmade_by_woodipedia

    @handmade_by_woodipedia

    2 жыл бұрын

    Imi poti lasa un nr de telefon?

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    @@handmade_by_woodipedia scrie un mail pe adresa de aici si iti las nr.

  • @SwayNotZay
    @SwayNotZay5 ай бұрын

    Do you have a degree or certification in this field? I'm currently majoring in electrical engineering and I enjoy this kind of work.

  • @diymariuselectro

    @diymariuselectro

    5 ай бұрын

    I am electronic engineer and I repair ATM for living.

  • @amannoonelistensto8615
    @amannoonelistensto86152 жыл бұрын

    Hi, If you could show how to check voltage Then how to change it from let’s say24 to 12. Then how to add rca output /input. So you can then use these subwoofers in 12v cars. Regards.

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    its different on each model.u cannt change from 24 to 12,but u can use stepup module.I will make a diy project to modify a sub like this on 12v for cars.

  • @dzabakwesi2213
    @dzabakwesi22138 ай бұрын

    Thanks for the video sir. Please how do I hookup a wireless lg soundbar and a wired Sony subwoofer. Please I need your help on this thanks

  • @diymariuselectro

    @diymariuselectro

    8 ай бұрын

    depends on the model,if it you need active subwoofer or pasive subwofer.do like inthis video.

  • @dzabakwesi2213

    @dzabakwesi2213

    8 ай бұрын

    @@diymariuselectro thanks for your response sir

  • @user-nq2zs4ir6m
    @user-nq2zs4ir6m5 ай бұрын

    Can you give me link to this chine bord?

  • @diymariuselectro

    @diymariuselectro

    5 ай бұрын

    its better to search the one more fitted for you,power suply voltage,impedance and speaker power.I buy from aliexpres and search there.

  • @T.v79
    @T.v792 жыл бұрын

    Show to us next time close to your video please that will help

  • @diymariuselectro

    @diymariuselectro

    2 жыл бұрын

    I will keep that in mind.tnx for sugestion.

  • @joserodriguez-wm3bm
    @joserodriguez-wm3bm7 күн бұрын

    ken i take my audio module and put in another wireless subwoofer

  • @diymariuselectro

    @diymariuselectro

    7 күн бұрын

    give more details bro I dont understand.

  • @DhakaMusicOmar
    @DhakaMusicOmar3 жыл бұрын

    u think a subwoofer sounds like that?

  • @diymariuselectro

    @diymariuselectro

    3 жыл бұрын

    this is really a mini subwoofer.In other video u can see my 300W rms subwofer.