Why 7.5" AR-15 Build Components Matter
T1C slings: tier1citizen.com/shop/ols/cat...
T1C Stickers: tier1citizen.com/shop/ols/cat...
T1C Pull Tags: tier1citizen.com/shop/ols/pro...
Training Standards FREE Downloadables: tier1citizen.com/training-drills
Who is Tier 1 Citizen: tier1citizen.com/about
Optics Used:
Trijicon ACOG 4x32 ACSS: www.trijicon.com/products/det...
Trijicon ACOG 4x32 LED: www.trijicon.com/products/det...
Trijicon ACOG 1.5x16S: www.trijicon.com/products/det...
Trijicon RMR06: www.trijicon.com/products/det...
Trijicon RMR08G: www.trijicon.com/products/det...
Aimpoint Micro T-1: www.aimpoint.com/products/red...
Aimpoint Micro T-2: www.aimpoint.com/products/red...
Lights Used:
INFORCE WML
INFORCE APL
INFORCE WILD2
INFORCE TFX
Surefire X300 U/B
Streamlight Protac 1-L
Shooting Chronograph:
Pact Club Timer III
Holsters:
Phillip McGuire: T1C Holster
Minuteman Defense: Gat Caddy
T.REX Arms: Sidecar
Bravo Concealment: Torsion
Cameras: SONY HDR-AS15
Targets:
www.challengetargets.com/SFNT...
Partial Human Silhouette - Handgun Rated: www.challengetargets.com/prod...
Partial Human Silhouette - Rifle Rated: www.challengetargets.com/prod...
Full Human Silhouette - Rifle Rated: www.challengetargets.com/prod...
IPSC A Zone - Rifle Rated: www.challengetargets.com/prod...
AR500 6" Diameter Pistol Target: www.challengetargets.com/prod...
Target Bases:
DIY Stands: • DIY: Reactive Steel Ta...
Static Stand - Heavy Duty: www.challengetargets.com/prod...
#everydaycarry #leadonsteel #fasttrigger #magpul #pewpew #tacticaltraining #rifles #sbr #shortbarreledrifle #airsoft #prepping #milsim #paintball #everygunlawisaninfringement
Abner Miranda, Not Airsoft, Firearms Training, T1C, Tier 1 Citizen, Tier 1 Citizen Training, Bravo Concealment DOS Torsion, GS17, Glock 19, Glock 17, CQC, CQB, CQC, Close Quarters Combat, Close Quarters Battle, Shooting Steel, Steel Targets
Пікірлер: 107
Thank you for sharing your experiences. It is good to know what is actually field tested and performed well. I was actually thinking the other day if I could run my Tier 1 Citizen PDW sling on my 18”. So, again thank you for covering that topic as well. Peace be with you.
@Tier1Citizen
11 ай бұрын
I've had several folks ask whether they should go with a 2 Point or PDW sling. Unless one has a PDW don't run that sling. 2 Point all the way!
I’ve had bcm mlok rail covers fall off while shooting several times,i swapped to using the magpul ones that have the center part that pops in and locks it in place. The best I’ve found that aren’t a million bucks are the slate black industries mlok covers, they use mlok screws to lock on.
@Tier1Citizen
11 ай бұрын
Sweet! Thanks for the info.
All kinds of reports of Aero Precision BCG's being absolute garbage. Nitride and 9310 bolts just don't mix.
@kennys9644
11 ай бұрын
-laughs in AK
@coltonowens2742
11 ай бұрын
@@kennys9644Lol, low quality shit AK's exist to. Hope you don't have a RAS47, c39v2, or a VSKA. I wouldn't trust PSA's AK's long term either, don't dimpling on receivers.
@ComeOnPelican91
11 ай бұрын
First I heard of this was on Ben Stoeger's channel. In my mind baseline equipment are phosphate carriers from the big names, even if they do rebrand other companies' bolt carrier groups.
@coltonowens2742
11 ай бұрын
@@ComeOnPelican91 Yup, phosphate BCG's from Microbest in particular are some of the best around. If you look in the right places, you won't be paying more than $120 bucks or so. Arftac and AR15 discounts routinely have them on sale for under $100 bucks. Hell PSA's "Fathers of Freedom" is a Microbest with sprinco springs already installed.
@VampireMilf
11 ай бұрын
I agree. I love nitride on most parts but it should not be used on BCG and bolts. They are always inferior. Phosphate and chrome lined is the way to go for BCG.
Abner, I have been and still continue to be a fan of your products! Your T1C comp IS the BEST!! I own several of them, and will buy more should it become available again. You also started working on one for 300 BO, hope that will be revived too. Your sling is also the best around. That’s my opinion of course. Keep up the fantastic work!
@Tier1Citizen
10 ай бұрын
Much appreciated!
I copied your build a couple years ago with the addition of a law folder and a 1x prism sight. I keep it in a small backpack with an armor plate in my truck. perfect use for that sortie in my opinion.
@MattWaller04
2 ай бұрын
Any issues with reliability with the law folder?
@danm9874
2 ай бұрын
@@MattWaller04 zero! Probably have 2500 rounds through it including a bunch of steel case. I keep it fairly wet.
@MattWaller04
2 ай бұрын
@@danm9874 I have one on my .300 blackout but I have nowhere near the round count on that one. Just curious. Seems like a really well built piece of kit, although I have heard they can be prone to rust.
Really dig my 7.5 bkings build. I have a few others at other lengths but its definitely one of the most "fun"
Got a lwrc love the ambi bolt lock and release on the right side. So quick. Yeah love my scalarworks leap mount too.
I have one of those got it years ago it works really good and I am really happy with it
what kind of defensive ammo do you run in your 7.5?
@dylana.601
11 ай бұрын
55 grain m193
@The_Ghost923
11 ай бұрын
Check out the Black Hills 50-grain Barnes Optimized TSX rounds. Nasty little pills...
@Tier1Citizen
11 ай бұрын
I run M193 across the board.
@Chunkofbrass
2 ай бұрын
@The_Ghost923 I've used black hill 9mm badgers they're so damn good
Definitely interested in purchasing a Komp.
I'd love to buy the muzzle device you used to make.
I’ve had several low quality aero parts and seen tons of bad parts on forums and the aero FB page. The excuse i heard is they pumped out a bunch of parts as fast as they could to cover them while they moved to a bigger facility. IMO any company that sacrifices quality to keep profit going while moving isn’t a company i want to deal with but i don’t really know if that’s true. But the bad quality I’ve seen is enough to keep me away. A lot of people bash anderson but I’ve had less issues with them than i have aero and anderson is a fraction the price.
@Tier1Citizen
11 ай бұрын
Dude I love Anderson Manufacturing. Yeah, Aero crapped all over themselves when they dropped quality and put out garbage.
I’m impressed w/ your capabilities w/ the 7.5”. Would you go with this setup in an urban, wooded SHFT scenario? Would you consider >62 grain for special/specific needs? Thank you again for sharing your experience!!! Keeps us from repeating your lessons learned!!!
@Tier1Citizen
11 ай бұрын
I would use this for a SHTF scenario, yes. It pushes holes in stuff and people just as well as any else does. So far I've not found enough performance increase to warrant going to heavier ammo. I use M193 and it works well.
Ironic that 20rd mag allows for prone with a bipod dmr. This is why 20-30rd mags are standard and amazing
🔥Start building and selling them again‼️
@Tier1Citizen
11 ай бұрын
Wish I could but it has become almost impossible to find consistently high quality parts that yield a solid product. I spend so much time returning bad components that my slim profit margin goes out the window. Time is money.
Hi Abner, barrel brand? and model? Thanks.
@Tier1Citizen
11 ай бұрын
Ballistic Advantage: Hanson 7.5" barrel.
@davidgrider4302
6 ай бұрын
@Tier1Citizen, what is the twist rate?
QQ - have you had any issues with frangible ammo and 7.5" barrel? If you used that ammo.
@Tier1Citizen
11 ай бұрын
I've never shot frangible through a 7.5" barrel.
Do you prefer to deal with ejection issues(over or under gased) with a adjustable gas block or with buffer weight and spring?
@Tier1Citizen
11 ай бұрын
With a buffer if possible. It's less invasive than swapping out a gas block.
Given your preferred methodologies I would love to see your thoughts on the ANR design/ANVL UKON optic mount that features a built in buis
@Tier1Citizen
11 ай бұрын
This is my opinion based on anecdotal experience. The sight radius is too arrow on something like this for it to be useful for anything other than a gross sight picture. This is similar to the sights that came on the top of the Trijicon: ACOG TA01NSN www.trijicon.com/products/details/ta01nsn In theory it's great, in execution it is nothing more than a very loose way of knowingly, roughly, which direction your weapon is pointed. You can do the same by looking through a dead optic and bracketing the front sight post, or even your raised thumb inside the optic, and pulling the trigger.
@TheIntellectualSlacker
11 ай бұрын
@@Tier1Citizen thanks for the reply I appreciate you're view point greatly
What drill and target setup would you recommend for someone who only has access to a public outdoor range about 40 yds long with random people shooting at the sides of me? I tried to look up training out here in the Washington state and can’t find any. Thanks in advance.
@Tier1Citizen
11 ай бұрын
Are you able to shoot steel there?
Sorry if I missed it but what buffer weight and spring are you running on that 7.5? Thank you sir.
@Tier1Citizen
7 ай бұрын
Milspec spring with a Spikes ST-T2.
I'm 5 1/2 feet tall and about 160lbs. Would the pdw sling be better for my smaller build to use with a 11.5in ar?
@Tier1Citizen
11 ай бұрын
No, I would stick with the 2 point sling. It sizes all the way down to accommodate people that are less than 100 lbs.
Been looking for a quality 7.5" upper all last week!!! Does anyone out there make a solid complete upper in this size??
@Tier1Citizen
11 ай бұрын
Not like this that I've seen anywhere. It sucks but it's become really hard to find solid components to build with.
Have a 10.5 aero up that runs perfect , have one of there 7.5 that I can’t for the life of me get to run , I think what’s happening is what u said when the bolt is extracting from the chamber to fast, any suggestions how to fix?
@Tier1Citizen
11 ай бұрын
Warren, try using a heavy buffer like the SOB from Griffin Armament. That should slow it down enough to be bearable. If that doesn't give you better results then consider a superlative arms adjustable gas block. That's what I'm using on this upper, and it works really well.
@warrenog499
11 ай бұрын
I appreciate it and will do, I was led to believe aero was higher quality but apparently not, crazy thing is I had a radical firearms 7.5 that ran great , and a Anderson 7.5 that ran, super aggressive over gassed but ran, also I can get my flash hider off my 7.5 , it’s like they used loctite and recommendations ?
@Tier1Citizen
11 ай бұрын
Yep, Aero has dropped the ball and can't be trusted anymore. If your 7.5" has Loctite on it, you can break it free by putting a propane torch to it for about 45 to 60 seconds.
Did not expect you to start the video breaking shots. My volume was cranked in my car.
@Tier1Citizen
11 ай бұрын
Yikes! I bet that hurt.
@J.Young808
11 ай бұрын
@@Tier1Citizen not really just glad I was at a stoplight 🤣
@Tier1Citizen
11 ай бұрын
That's good.
Good afternoon, Tier 1, A very informative video. I recently completed my first 7.5 build and have ejection issues 😮. I could use expert advice?????
@Tier1Citizen
5 ай бұрын
I'm guessing it's over gassed and your casings are shooting forward really hard. Slow your gun down with a really have buffer like this one from Griffin: aimsurplus.com/products/griffin-armament-ar-sob-suppressor-optimized-buffer This one Spikes is heavier is you need to go there. Your casings should be ejecting around the 3 - 4 o'clock positions. Antying forward of the 3 is too much gas. Spikes T-2: aimsurplus.com/products/spikes-tactical-st-heavy-buffer-t3-5-5-oz
You definitely need to find a way to manufacture those muzzle devices!
@Tier1Citizen
10 ай бұрын
Working on it!
What upper and hand guard is that?
@Tier1Citizen
7 ай бұрын
Anderson MFG. Upper. No forward assist, no ejection port cover. The handguard is a BCM 8" KMR. Why not M-LOK, because KMR panels lock on better and stay put. On M-LOK they pop off way too easily.
I like the ar but where did you get the dutton T
@markulsh485
11 ай бұрын
Murdoch’s Home and Ranch website
@Tier1Citizen
11 ай бұрын
I got it from Kohl's.
@americanprepr
11 ай бұрын
@@Tier1Citizen thank you sir, just picked one up
How do you feel about pws’s long stroke piston driven mk107 7.5
@Tier1Citizen
11 ай бұрын
I don't care for pistons on AR-15's. They don't age well.
@lemniscatelogos7917
11 ай бұрын
@@Tier1Citizen now I’m concerned did I make a bad choice ?
@Tier1Citizen
11 ай бұрын
I'm sorry to have to tell you this, but yes, piston guns don't age well. There is a reason that most ranges that rent machine guns don't run piston guns. They run direct impingement guns instead. The greatest lie told to the AR-15 industry was told by H&K, back when they released the HK416. They said "the AR-15 has finally been fixed..." Those of us who build AR-15's went "what, since when is the AR-15 broken?" The AR-15 is way too high pressure to run on pistons. That is why op rods crack and or bend and strike keys fail. AR-15's were meant to run on DI systems and AK's were meant to run on pistons. The two should never cross paths.
Enjoy your video... love your 1st class product.
@Tier1Citizen
9 ай бұрын
Thanks so much!
This may be a dumb question but is this build considered an SBR or a pistol?
@Tier1Citizen
18 күн бұрын
This one is an SBR because it is registered as one. However, all I'd have to do to make it a pistol is not register it and put on a brace. I would highly suggest the SBA4 brace from SB Tactical.
@alexg2933
18 күн бұрын
@@Tier1Citizen thank you!
I bet you can’t say all that in English? Miss you my brother. Always enjoy watching you work.
@Tier1Citizen
6 ай бұрын
Thank you my brother.
Looks like a psa marauder muzzle device
@Tier1Citizen
Ай бұрын
I've never heard of that one before. I'm gonna go take a look at it.
You make a click click quiet not boom boom quiet rifle. 😂
Please remake the KOMP
@Tier1Citizen
7 ай бұрын
I'd love to, I just need to find a machine shop to make it that won't try and take me for a ride like the last guy did.
@lupin8042
5 ай бұрын
How do I go about purchasing a comp from you? Also what are your thoughts on suppressor for a 7.5?
It's a shame that Aero precession has gone that way.
@Tier1Citizen
8 ай бұрын
Indeed!
@skydivingcomrade1648
8 ай бұрын
@Tier1Citizen what twist rate do you recommend for a 7.5" barrel? I head someone say that I need "hand loads" for that short a barrel....needless to say I disagree, but I'm not sure about the bullet weight and twist barrel twist rate. Any help would be greatly appreciated.
@Tier1Citizen
7 ай бұрын
1/7 or 1/8 will do you fine.
@skydivingcomrade1648
7 ай бұрын
@@Tier1Citizen thank you for the response
(Gasp!) You have hair 😅 you look way different. (Not bad) 👍 never thought about that need to check the balance on mine.
@Tier1Citizen
11 ай бұрын
😅 Yeah, I've been growing my hair out. It looks pretty good too, huh? Yep, a balanced rifle really matters.
Are you blasting 360 degree? Aren’t you worried about flying bullets?
@Tier1Citizen
11 ай бұрын
Yes I am blasting 360°. No, I am not concerned about bullet fragmentation. Here, watch this video, it will explain the "why" behind what I'm referring to: kzread.infoi3n2wdL-I-g/
7.5 AR-15 has a very limited use. A barrel that short will beat that gun up. It will be less reliable. Terminal ballistic suffer. 10.3 is the shortest you should go even then 12.5 is a much better choice.
@Tier1Citizen
11 ай бұрын
Those are old and broke talking points. I have sleighed that sacred cow many times over. I no longer believe any of that stuff. I have seen and done too much with my 7.5" rifles to deny what my eyes have seen.
@lemniscatelogos7917
11 ай бұрын
@@Tier1Citizen preach !!!!!!
@Tier1Citizen
11 ай бұрын
Well!!!
Unfortunately aero hasn't changed. They've been laying off employees like they're boeing. Qc is still pretty bad. About half the time I have to exchange my items due to as you said cracks in the coatings and cs is terrible too. Poor communication and they seem to like to blame the customer, unacceptable. They think too highly of themselves.
@Tier1Citizen
2 ай бұрын
Daniel Defense is the same thing. I bought two optics mounts that came without mounting screws. I took it up with them by email and never heard back. Oh well, that's where we are in the industry.