No video
Whirlpool Front load LO FL code fix
Whirlpool washer front loader had a LO FL code:
Troubleshoot and found that Hot Water Water inlet solenoid failed.
Remove and replace/ checked pressure sensor and hose for cracks/chafing.
Clean your machine after 20/30 washes, monthly- keep door open to prevent mold and mildew smells from machine
Supplying Demand W11316255... www.amazon.com...
Пікірлер: 69
Dude, you are a money saver! I also had a FL Lo error code in my exact model whirlpool washer. First I started by taking off the water supply hoses and found the rubber washer disintegrated and plugged the cold water intake screen. I cleaned them and replaced the hoses and hooked it back up. It worked fine for about a week and then the FL Lo error started again. Thankfully I found your video and did everything you said to do. I switched the hoses to see if my solenoid was bad. As it turns out, I had the cold and hot water hoses mixed up. Now the machine works perfectly. Thank you for making this informative video. Guys like you are the only reason I still have a use for youtube.
@therealcommodoremccrary
4 ай бұрын
My pleasure!!
This is so so helpful so as to not have a service call and therefore way more cost effictive including your maintenance tips, thank you for sharing, my friend!
@therealcommodoremccrary
Жыл бұрын
Glad it was helpful!
I was able to find both the hot and cold switches and replace both of them! Thank you so much for this helpful video! All I had to do was replace both switches and it seems like it's doing its full cycle without getting stuck on LO FL! You are da man thank you so much! It's works! Confirmed! Thank you thank you!
I have been looking for this information for weeks!!!! Couldn't find a tutorial for this specific washer. Thank you soooo much!
@therealcommodoremccrary
4 ай бұрын
Glad I could help!
Great vid Saved me a service call as the pressure hose came loose for me Fixed my issue
@therealcommodoremccrary
Жыл бұрын
Glad it helped
I had it replaced and the code went away, thanks again for the video.
@therealcommodoremccrary
Жыл бұрын
Glad I could help
Thank you so much for going over so many issues that cause the FL Lo error code. Im a single mom of 2…so I try to figure it out myself (first). This is the best video I’ve seen. I’m excited to go check out some of the things you pointed out. Hopefully I can fix it and it saves me money. I’m getting ready to pop the top and work on it now. I’ll update you if I do figure it out.
@therealcommodoremccrary
4 ай бұрын
How did it go?
I've had problems with this washer from day one. Your video helped me all the way through thank you so much.
@therealcommodoremccrary
Жыл бұрын
Great to hear!
@lisao3041
Жыл бұрын
Did you purchase it new and call for service?
@therealcommodoremccrary
Жыл бұрын
@@lisao3041 purchase it with the home when it was built.
@lisao3041
Жыл бұрын
@@therealcommodoremccrary, gotcha. At least it was under warranty.
I have same washer but problem with vibrations during spin. This unit is same as maytag and worst running machine. I have 16yr old affinity/ electrolux that runs better. Quality of the parts for this whirlpool model is really bad. From bad shocks, striped screws to defective spings, valves.....etc. Whirlpool came out 2 times in 6 months and never repaired unit and parts were near impossible to get until warranty expired. Lots od production and parts problem.....thanks for trying to help others.....
I got same problem!! I'll try following your video that is very helpful !!
Heyyy new fam here! That's nice washer and dryer set, it was great that you could fix it, I'm sure this video will help someone. Hope to see more videos from you. Happy Thanksgiving❤
Great commentary easy to follow
Helpful video.
Good video, thank you for sharing what you learned
Thank you great video god blessed
How can I find out which component i need to replace based on the LO FL error code, I get that code every cycle now, the inlet filters are clean.
Thank you for your help good sir
Did you test the solenoid??? Or how did you know it was the solenoid?
@therealcommodoremccrary
4 ай бұрын
I listened to see it water was flowing through the valve- since no water was flowing, the solenoid didn’t open to allow water to flow.
My current LO FL issue is intermittent. It only happens sometimes, and it doesn't matter what wash settings I select. It's making it difficult to diagnose which part is faulty. Is that consistent with what you were experiencing as well?
How did you know that the hot water was not working? You said you switched the hoses and found out, but I did not understand how you figured that out
@therealcommodoremccrary
4 ай бұрын
I was washing towels, did not have any hot water entering the wash tub. Troubleshoot it from the water inlet, to the soap dispenser. Swapped hot water inlet to cold, water flowed
Hello, do you know how to increase the water level on this model?
Great video. Thanks for sharing this.
@therealcommodoremccrary
Жыл бұрын
Thanks for watching!
Whirlpool Front load IS THE MOST PROBLEMATIC MACHINE I EVER HAVE.
@JordanDick
4 ай бұрын
Agreed. Had one for ten years. Ran it every day had one problem. Got a new machine recently. Had to replace it in two years. Now the new one is acting up one year later. What a piece of sh*t!
Excellent! Tks can u show how to take off the top, and explain about the area you cleaned with your thumb better Tks again 😊. From Dom C. , 😊New York.
@therealcommodoremccrary
Жыл бұрын
Ok will do. I have put that washer set in storage. I will make a video on setting up/ cleaning process once I move into new home
Have the same issue with my Maytag.
I can hear mine solenoid clicking can it still be the problem? Where can I buy the filters at?
@therealcommodoremccrary
Жыл бұрын
You can buy the filters at any Big Box stores, i.e Lowes, Home Depot, Walmart
Thanks
I have the same machine with Lo Fl code the water valve clicks so im assuming it works, also no leakes on the hose, it starts the cycle normal, but at around 7mins left of the cycle it stops, and throws Lo Fl code again. Anyone might know why?
@ktd6006
Жыл бұрын
Have the same thing happening. So looking for the same answer
@asgoodlett
8 ай бұрын
Did you find the solution? I am having same problem @@ktd6006
@therealcommodoremccrary
4 ай бұрын
The solenoids could be going bad.. and if it’s happening later in the cycle, check the pressure hose on side of the drum- it may have a small leak in it. I went a step further and cleaned the pump out- come to find out, there was a sock, and a dime in the pump 😮
I need a cold water solenoid replacement for this exact model. Can you help me find the one? Can't seem to find it.
@therealcommodoremccrary
2 жыл бұрын
If you take the lid off the, you’ll see the part number
I have this exact machine and I purchased it in September of 2020. I am getting this same error FL lo.
@therealcommodoremccrary
2 жыл бұрын
I purchased mine around the same timeframe. Swap the cold/hot hoses to see if the gripe follows. If the hot comes out the cold setting- it’s the solenoid
@kylewaugh4936
2 жыл бұрын
@@therealcommodoremccrary just swapped the hoses and started a cycle with cold water. And it seems to be working without the error popping up so that would conclude that the part I need is in your video?
@therealcommodoremccrary
2 жыл бұрын
@kyle yes, that hot water valve will be what you need. Check and make sure the pressure line didn’t come off also. 👍🏽👍🏽
So just replacing that one part makes the code go away?
@therealcommodoremccrary
2 жыл бұрын
This is the the most common issue to get rid of the code.
Whats the part numbers for cold and hot
@therealcommodoremccrary
Жыл бұрын
I left the machines in the home when I sold it. You should be able to find it on Amazon and Whirlpool parts website. I hope this will help.
I have the same washer but the error code is F6E2. Do you know what that mean?
@therealcommodoremccrary
Жыл бұрын
I believe it must be the pump that drains the water out of the tub. I'll triple-check and get back to you
I have the exact same machine with the same problem was about to call a tech out then saw this vid. Thank you!!! Btw do you know how to adjust the water level valve?
@BrandonTobiasKingT
2 жыл бұрын
these cant be adjusted as its the digital; pressure sensor no adjustment screw also what I would like to know if there is a flow restrictor behind the filter mesh in the valve
@vereen70
2 жыл бұрын
@@BrandonTobiasKingT IDK about the flow restrictor, but you just saved me another headache again by telling me about the digital sensor for water level rather than the traditional adjustment screw. Lol man I was about to tear the machine down looking for that thing 🤣
@BrandonTobiasKingT
2 жыл бұрын
@@vereen70 when you change the water valve pull out the mesh if you see another item in there there is a flow restrictor ... WP stopped the manual sense a while mine is a 2012 model and that had the electronic verson also
@vereen70
2 жыл бұрын
@@BrandonTobiasKingT Thanks 👍🏾
@therealcommodoremccrary
Жыл бұрын
Not that I know of, these new machines are supposed to be high efficiency/low water. I kinda low key miss my top loader washer.
So Fl Lo code is the same As Lo Fl?
@therealcommodoremccrary
Жыл бұрын
Yes, It should be the same code.
como se entiende Spears spañich