🪒Henson Razor makes a great holiday gift: bit.ly/3CWiWJP 👷Other cool Practical Engineering stuff here: store.practical.engineering

@lourias

6 ай бұрын

I appreciate that your videos can appeal to audiences at least as young as 8 years old. You do not dumb it down, rather you use the technical term and explain that technical term. How awesome is that? I love physics, math, sciences of all sorts. I attempt to instill that into my grandchildren. My 8yr old g-son, who is in gifted and talented program really loves abstract and tangible concepts. You bring both of these ideas to your videos. Please continue such awesomeness!

@Messilegend1000

6 ай бұрын

Hey Grady! My nephew loves trains, he LOVES talking all day about trains. Say, he were to have the life goal of working around trains, should I teach him maths? Is that a good start? I mean, is algebra (or some special kind of maths, sorry I am just a blue collar mom doing her best) helpful for him? Sorry for the strange question. Love love love your videos, we watch it together!! )))

@LivinSouthern

6 ай бұрын

A channel on KZread I watch, Hyce, that also included some of this information is here is a link to one of his Railroad 101 videos kzread.info/dash/bejne/nIOL1puHnta1iLA.htmlsi=IQDe9L27W_vU7Bu9

@Private-GtngxNMBKvYzXyPq

6 ай бұрын

+1 for Henson. I don’t think I will ever go back to disposable razors 🪒🙂 I wish they would make a travel case for their product. Maybe you could put in a word with them.

@Big_Un

6 ай бұрын

Great video again as always. Thank you! A bit of feedback, if I may, on your sponsor Henson. I believe it will be relevant to other viewers. (It turns out positive, promise! LOL) I bought a Henson a while back but every time I tried to use it I felt it was a terrible and uncomfortable shave and ended up switching back to my 5 blade, flexible head, disposable razors. I just resigned myself to dealing with the constant clogging of the disposable blades and wonky cartridge/handle connection every time I tapped the razor in the sink. With the disposable razor, the flexible head adjusts to the optimum angle of the blades against my skin. I didn't have to think of the angle that I held the razor in my hand. In my opinion, there IS a learning curve to using a Henson, but it makes ALL the difference! Once I got the optimum angle correct, the Henson is by far a better shave. If any of your viewers have struggled with this as I have, I encourage them to keep at it. It will be worth the effort. One other tip, making the shaving cream a little wetter while using the Henson also makes a big difference. Hope this helps someone.

It's so heartwarming to see a civil engineer overcome their greatest fear and make a video all about something that moves

@bartsanders1553

6 ай бұрын

This is the most wholesome dis I've ever seen😂

@loscheninmotion9920

6 ай бұрын

Amazing comment

@NoNameAtAll2

6 ай бұрын

his* he's alone

@techheck3358

6 ай бұрын

@@NoNameAtAll2the word their is singular too 😊

@personator

6 ай бұрын

​@@NoNameAtAll2 they're referring to a generic, unknown civil engineer, not a specific one. The generic 'they' is valid.

I'm a locomotive engineer. I've moved many stone trains. In fact, in 21 years, I've hauled pretty much anything you can imagine...including elephants. I chose the level path without the tunnel. It's the longest, therefore I get paid more to drive the train.

@seneca983

6 ай бұрын

I'd imagine that depending on the length it might also result in difficult working hours.

@geraldfrost4710

6 ай бұрын

LoL! Maximize operator prifit!

@Comm0ut

6 ай бұрын

@@geraldfrost4710 Considering the way modern US railroads treat employees, good for them getting theirs.

@A-Milkdromeda-Laniakea-Hominid

6 ай бұрын

Now that's some decent application of mathematics and logic 👍🏻

@TheEDFLegacy

6 ай бұрын

Elephants?! Neat! ...Did you need to use the horn when you had them on board? 😅

I find these videos utterly fascinating. When I show them to my dad, who's worked for the Union Pacific for 25 years? "I just got off work. I don't want to look at trains."

@Kroooza

Ай бұрын

lmao

I work as a freight train conductor in Canada, and the largest train I've had was 36500 tons of potash. It was 256 cars and 4 locomotives. It was two locos on the head end, one in the middle and one at the tail. Very rare occasion they run a train that big.

@c44-9w9

4 ай бұрын

You work for cn?

@codemiesterbeats

3 ай бұрын

Lawd have mercy there is a joke in here somewhere 😅

@10C45E

3 ай бұрын

Amazing! I went to Canada and got to see for myself how enormous the freight trains are over there! It was my first time seeing a North American freight train in person and the photos really don't do it justice!

@atomlib

Ай бұрын

It used to happen more often in the past whenever yo momma had to visit the town.

@sleepdeep305

Ай бұрын

Whoops, you accidentally went over the 8-bit integer limit

I used to be the manager of a warehouse that had a rail spur for shipments. Many times, I had to move the box cars by myself. I used a 'Johnny Bar' to start them moving, and then I could just push them into place at the docks, fully loaded. No problem, IF THE BRAKE WAS OFF.

@RandymanB

6 ай бұрын

I did the same when I was a receiving department manager at a furniture store. I used my Chevy Blazer and a chain. The first time I did it my crew was saying no way I could pull the loaded rail car. I hooked it up, put it in drive and didn't have to add much throttle and the car started rolling. We were able to spot at the correct door for unloading.

@lizj5740

6 ай бұрын

@@RandymanB *stop

@seanworkman431

6 ай бұрын

Those brakes are there for a reason.

@TimothyReeves

6 ай бұрын

Spiral tunnels? Wow, that's something I didn't know existed. All makes sense but it's cool to learn.

@seanworkman431

6 ай бұрын

@@TimothyReeves railways are fascinating, the creative engineering is something to behold.

The rail wagon you were trying to pull had cold bearings. This makes a huge difference. A cold train has a 'dead’ feel to it whilst, an hours running later, the same train will feel much more ‘lively’. Not as pronounced on an all roller bearing train but on old white metal bearings, can add an extra notch or two to maintain speed.

@IndyJay53

6 ай бұрын

Wow, that's so interesting!

@hanshima_

6 ай бұрын

Thanks for sharing. I have been working on railway for some few years, and I didn't know about that yet.

@DB-thats-me

6 ай бұрын

@@hanshima_ Thankfully KiwiRail has done away with ‘free’ shunting and moved to push pull. I have worked in flat yards where roller bearing wagons can start to roll due to wind pressure alone! We called them ghost wagons and they made NO noise. Good way to get yourself killed if you didn’t keep your wits about you when out in the yard.

@Island_Line_Rail_Productions

6 ай бұрын

They are CARS not wagons

@DB-thats-me

6 ай бұрын

@@Island_Line_Rail_Productions OK. Well done. 👍. My comment was in relation to the bearings, not necessarily what rides on them.

Tyre pressure *really* makes a big difference to the rolling resistance of my car. I can tell almost instantly if a tyre is a bit low, by pushing it on my driveway. By the way, at 5:00, Grady forgot to mention that on electrified lines, most of the downhill force can be recovered by regenerative braking and fed back into the grid. And Grady pulling a wagon by hand brings to mind No 1111, 'Four Aces', a 4-8-4 steam loco built by Alco in 1930 for the Timken Roller Bearing Co to demonstrate the lower friction of roller bearings. At some stops, for publicity purposes, three men could pull this 300-ton locomotive.

@mandowarrior123

Ай бұрын

Topping out your tyre pressure is always worth it before a long journey for fuel efficiency, and tyre wear. Also, waxing to reduce skin drag is very valuable if you do more than local slow driving.

@helplmchoking

29 күн бұрын

Not just the resistance, though a couple psi low will make a real difference on a long journey. I had some body work done on my car and for whatever reason the shop kindly 'checked' my tyre pressure. ~32psi is a good rule of thumb for low performance economy cars on thick tyres, which is what they set mine too even though I run 35f/38r and the difference was *instantly* noticeable just leaving their shop. The ride was squidgy, the handling numb and less predictable, and the grip just felt wrong. IMO everyone should have just a simple pressure gauge in the car, give them a quick check regularly and make sure to keep them topped up especially on a journey. A couple thousand Km when you're 5psi too low and you'll notice how bad the tyre wear is

I had a teacher, back when I was in 5th grade, who tried to move a rail car with a tractor. The tractor's tires just spun in place. He was stymied and thought it impossible. Another man handed him a steel bar, with an angled foot on one end, and said to use that. My teacher looked at the man and thought he was nuts. He stuck that foot in between the wheel and rail and put a bit of pressure on it and the rail car began rolling. It was the prime example of a lever for teaching our class.

@lorenblaine5275

5 ай бұрын

When my daughter was in preschool they were learning about simple machines (LEVER, pulley, screw, inclined plane, wedge,wheel) At home I set up a 10 foot plank with a fulcrum (block) very close to the wheel of my one-ton truck. She was able to lift the tire off the ground just enough to see completely under the tire. Apparently she told the class and I became the "cool dad" 😎 whenever I was there helping out.

@DB-thats-me

4 ай бұрын

I suspect that between using the tractor and using the Johnson bar…..someone released the handbrake! 😳😂 Old trick. Like sending the new guy to the stores for a long weight. 👍

@patrickday4206

Ай бұрын

Fulcrum would approve

Before watching was wondering how the question so simple needs a video this long for an answer. But now I see, it has never been about the answer, but the journey to it.

@sorryplease5071

6 ай бұрын

That’s the fun. 🎉

The most impactful practical example of what happens when friction is low for me was seeing just how easy it was to move stones that weighed several tons while they were being suspended by an excavator (we were building a retaining wall). It truly is amazing just how much friction matters.

@PascalGienger

6 ай бұрын

I was allowed once in Germany to push a train with 4 carriages on a even track. I was able myself - only myself! - to push the train slowly to motion using my fuil body weight and muscles. It began to move! With a truck - no chance. Railroads are so energy efficient!

@dustinbrueggemann1875

6 ай бұрын

@@PascalGienger If not for the whims of financiers, trains would be the only way freight ever moved. There's simply no arguing with the fact trains just need less to do more in every single critical category.

@rob585

6 ай бұрын

@@dustinbrueggemann1875What holds them back is maneuverability. It’s too expensive to lay track to every single customer and trains can’t make as tight turns or go to as small places as trucks do. Trains are good for moving a lot long distance. When you need to move a small amount to a specific destination however, the train makes a lot less sense than a truck.

@Nauda999

6 ай бұрын

And gravity matters too, how easy is to move anything in the space, you wouldn't believe.

@garethbaus5471

6 ай бұрын

​@@rob585That is true, but we use trucks for extremely long repetitive trips far more often than we should.

I'm a train driver from Europe, and I found this super interesting and informative! When we occasionally had to move cars manually we used long steel bar chisels (not sure what its name is in English. Basically a 5 foot crowbar) as a lever under the wheels to get it rolling. Thanks for the video! Will definitely check out more of these!

@mack.attack

6 ай бұрын

We call them Johnson bars or Jonny bars 🙂

@johnrhodez6829

6 ай бұрын

If you had attached the cable to the locomotive with no slack in it and the sat in the middle of of the cable to car would have moved. As a ten stone teenager I once sat on the mooring line of the Queen Mary when it was at Southampton, very slowly the line went down to the ground. I stood up and the line went slowly up again. That ship was somewhat heavier than the railcar!!

@christopherhammond9467

6 ай бұрын

@@mack.attack or outside of the train community we call them breaker bars for concrete work

@jaredkelly930

4 ай бұрын

​@@mack.attackmexican switch engines

15:20 a roller bearing car can be relatively easily moved manually, but plain bearings take quite a lot of force to get started. The railroad I volunteer at hosted a strongman competition with a boxcar pulling competition as one event. Our crew moved the car around with a locomotive just before each attempt to get a layer of grease in the bearings, otherwise even the strongest competitor couldn't have budged the car.

This reminds me of a demo i saw in a museum, they had a truck axle on asphalt and a train axle on a rail, both with a pull rope, and despite the train one weighing more than twice the truck's, they were noticeably easier to pull

@honkhonk8009

6 ай бұрын

demoman. Gravel. TF2

@benjurqunov

6 ай бұрын

I move full railcars around our siding with basicaly a 6' crowbar.

@eriklarson9137

6 ай бұрын

@@honkhonk8009 rolabouta. Ice. MG6

@glenmccabe3364

6 ай бұрын

They demo this concept for kids at the train museum in Tokyo. They put 10kg of water (20 x 500ml bottles IIRC) trays x 4 of them on a carpet, rubber wheels, rollers and steel wheels IIRC. Even to adults, it's amazing how much easier the steel wheel trays are to push.

@AL_O0

6 ай бұрын

@@glenmccabe3364 This was a full size train axle and wheels weighing 1.4 Tons on standard gauge track and children were still able to move it relatively easily

So good that he stayed “on track” when talking about locomotives. I think it would be disastrous if his “train of thought” was derailed.

@dewiz9596

6 ай бұрын

That’s a five out of ten 😊

@happytrails5342

6 ай бұрын

🚪 🚶

@weylinwest9505

6 ай бұрын

​@@happytrails5342It was time for Thomas to leave. He had seen everything.

@happytrails5342

6 ай бұрын

@@weylinwest9505 😂

@balboa9439

6 ай бұрын

Yup. He rolled with that one. That's a wrap.

I’ve been an inland merchant mariner for almost 20 years, an engineer for my company for almost a decade now. I love your presentation on this. I would love to see you do one on our industry that works somewhat behind the curtain, but in plain view. One thing i have learned is it it more cost effective per unit to move something in larger quantity. As a rule of thumb our boats burn one gallon of diesel per horsepower used per 24 hours run time. It is hard to think of something that burns 12,000 gallons of diesel per day as economical, but when you figure in the amount of work done for that fuel it absolutely makes sense. Id love to see you break it down. I do believe that our inland waterways provide the lowest resistance to moving large quantities of stuff in this country.

@jovetj

6 ай бұрын

The common rule of thumb promoted by the railroads has been: one gallon of diesel fuel will move one ton of freight for 400-500 miles.

@joshyoung1440

5 ай бұрын

"One thing I have learned is it is more cost effective per unit to move something in greater quantity." No offense but it didn't really take you a career in shipping to "learn" that, did it?

@joshyoung1440

5 ай бұрын

Also it is very easy to think of something that burns 12,000 gallons as economical because the amount is obviously meaningless; it is the ratio that determines efficiency, which you had already told us about, rendering the number 12,000 irrelevant. Other people also understand that efficiency is based on proportion. You're kinda speaking down to people.

@jaelwyn

4 ай бұрын

​@joshyoung1440 To learn to observe that it is "usually" true, probably not. To learn _by how much_, on the other hand...

If you were wondering, the amount of rolling resistance from a cars tires is extremely dependent on tire pressure, tire type, and surface type. When i had my 3500lb jeep on stiff load range e tires with 80psi on a smooth shop floor, it literally took one finger to push. Now try pushing the same jeep but on more flexible four ply tires, underinflated at say 15psi, on a gravel road. Itll probably take two people. Pushing cars with flat tires is very very difficult.

Working in a stockroom/yard and the difference in rolling resistance between smooth, hard concrete and soft, grippy asphalt often makes the difference between being able to move a heavy pallet by hand with a pallet jack, or needing to get the forklift. And with a pallet jack, keeping the floor clean is all too important; a small stone, nail, or sliver of wood from the pallet itself can make a easy load impossible to move. The flip side is this; a smooth, hard and clean surface makes things much easier to move but much harder to stop. Without rolling resistance to slow things down, you have to deal with all of the inertia yourself.

@Wetcorps

6 ай бұрын

I often find myself handling my pallet jack with as few stops as possible, because the hardest part is to get it moving. Today I learned it's called static resistance, neat.

@Vinemaple

6 ай бұрын

Wheelbarrows work the same way: it's always easier to push along the path than to cross open ground, no matter how flat.

I remember when I worked at a railroad, if you didn't have the brake set, the engine would usually start to roll away, even on seemingly flat surfaces. Later, when I worked on rail transit, there was a spot that seemed flat but the train would start to roll if you released the brakes, and it just so happend to be on paved access way. Out of curiosity, I stopped a truck in that spot and put it in neutral and had no roll back.

@jaredlancaster4137

6 ай бұрын

Especially on loose and uneven surfaces, it's impressive how much of a hill I can leave my car on in neutral and it's won't roll.

@xe-wf5iv

6 ай бұрын

@@jaredlancaster4137 That is less do with friction and more to do with the fact that most cars are designed not to roll.

@jaredlancaster4137

6 ай бұрын

@@xe-wf5iv actually I'm pretty sure cars are meant to roll, generally with low friction.

@satunnainenkatselija4478

6 ай бұрын

Obviously, you can't push rolling stock uphill manually. So the answer depends on the gradient.

@godfreypoon5148

6 ай бұрын

@@xe-wf5ivNot sure which car companies you've been hanging around.

That air resistance factor is a significant part of why you don’t see freight trains operating over about 80 mph very often. Beyond that range it starts to significantly impact the efficiency rail freight offers.

You are really hitting it out of the park Grady! Absolutely love this series, cannot wait for the next video, thank you so much for putting so much work and time into these videos

I'll use an example, until 2001, Norfolk Southern ran down Saluda Grade and that was at the time the most steepest with 5% going down. From the summit at Salula all the way down to Melrose, trains had to use dynamic brakes to keep the trains at around 8 MPH and if you didn't keep it at around 8, you would be heading for the runaway ramp down at Melrose and you might get in some trouble (that is why you had the Road Foreman of Engines on board and he had a special key just for running trains down Saluda Grade)

@JustAGamerA

6 ай бұрын

Dynamics and air the whole way down, with retainers on

@RCAvhstape

6 ай бұрын

5% sounds like a roller coaster.

@bwhog

6 ай бұрын

There's a reason that it took so long to build the railroad across the Sierra Nevada mountain range when the first tracks were laid. Grade is everything and failed brakes have caused a lot of problems!

I love this series. These concepts makes sense intuitively, but the numbers are amazing! I hope you keep this going for a really long time. There’s so much I’d like to know about how railroads work and how they operate. Please include ones on the various propulsion systems in use in different types of trains these days. It must have been the biggest day in your son’s life helping Dad pull a car! Cheers!

@thithi8793

6 ай бұрын

ok

@lycu3093

6 ай бұрын

ok

You should totally do a deep dive on canal and river barge shipping too. I'm not just saying that because I'm constantly seeing crazy amounts of gravel shipped up the Hudson River from where I work, but that is part of it. I would love to see how the barges stack up against the trains.

@destructionator17

6 ай бұрын

I came back to this comment section to say exactly this. I know a barge can hold more weight than several train cars and they say it is more fuel efficient but I'd love to see the force meter on a heavy load pulled by hand too.

I took my kids to the Texas Transportation Museum a little while back and I was pleased when they loved it! This is such a great series. Thanks Grady!

My grandfather ran his own a trackwork company for many years. He did work all over the Midwest. I was only about 8 years old when he retired so i never got to learn much about his work, but I love these videos about trains because they remind me of my grandpa. ❤

@weylinwest9505

6 ай бұрын

Nothing's better than a railroader grandpa.✊

@AaronLyNxAI

6 ай бұрын

I grew up by train tracks till i was about 8, and this reminded me of him. My grandpa didn't work on trains, he was a roofer that couldn't read or write but could roof a house in half the time a crew could and it would look just as good if not better. Dude could also ride a horse like a 20 year old. Miss the old fella. Wish he could see me today making knives, and building things just the way he would have wanted 😊

@witzman

6 ай бұрын

Time to get into 18xx boardgames

@AaronLyNxAI

6 ай бұрын

@witzman nah for trains, the best thing ever is derail valley/Railroads Online. Both are awesome steam Loco games about laying the track, and driving the trains, with some decent physics.

@RCAvhstape

6 ай бұрын

@@weylinwest9505I have a railroader uncle. Worked for Penn Central and then Conrail in the 1970s, working on tracks, bridges and tunnels out in the middle of nowhere, real back breaking work. Creosote burns on his skin from railroad ties. He's retired now but loved the railroad and got me some pretty cool toys when I was little. Lionel trainsets, etc. Took me and my dad out into the hills to show us some of the stuff he'd worked on or seen.

I would like to have seen, at the very end, an illustration of the diesel fuel needed per ton/mile to transport that gravel by truck compared to by train. Otherwise, excellent video, as always.

@ThZuao

6 ай бұрын

Idk about the truck part, but a train needs roughly 1L of diesel to take 1 ton of cargo 500km.

@AlexanderBurgers

6 ай бұрын

​@@ThZuao Rough back of the napkin math says a truck takes easily 20 times more. Most of that will be in the rolling resistance, some of it in air drag, and some in not having to deal with vehicle traffic nearly as much.

@joeyager8479

6 ай бұрын

Trains measure in at 477 ton-miles per gallon of fuel vs trucks at 145 ton-miles mostly due to reduced rolling resistance of steel on steel vs rubber tires on pavement and wind resistance. This info was from a Stanford University study dated 12/16/2022. A lot of info is available off the net if you figure out how to phrase the question so that Google actually is a help!

@Rich-on6fe

6 ай бұрын

One ton pickup probably 50 to 100 litres

@dyadica7151

6 ай бұрын

@@joeyager8479 So Grady could have shows 1&2/3 teaspoons of fuel in one hand, and 1/3 of a cup of fuel in the other to show the difference to move a ton of gravel one mile. I think that, or perhaps the amounts for the initial room-full of gravel to make that visual impact.

With the curved path - you might want to look at: 1: superelevation of track - the practice of tilting the track, with the outside rail if the curve being higher than the inside rail, to assist with the reduction of drag around curves 2: flange lubrication. In the USA, locomotives usually apply grease to their flanges automatically on curves. There are also track-based lubrication systems. Cuts noise and drag. Lubrication is usually applied to the inside of the curve, just below the running surface of the rail. 3: self-steering bogies/trucks. Modern trains, usually passenger vehicles, can physically turn the train wheels within the bogies to line them up with the curve. 4: Tilting trains. Active mechanisms on higher speed passenger trains to get faster travel around curves. E.g: Acela has active tilting above 60mph in some areas. 5: load/length restrictions on curves 6: the risk of "string lining"

I'm a Railway Engineering student, I'm loving these series so far! Thanks! Also locomotives are awesome!

In flight school, pushing planes by hand is a common occurrence. They weigh about 2000 pounds empty, but I’m always surprised at how “easy” it is to keep them moving. Id be very interested to see how the rolling resistance compares to a street car and a rail car

@Kandralla

6 ай бұрын

For a plane it's going to be similar to a car. There's little reason to optimize there because the plane spends so little time running on it's wheels and any weight/volume added to accommodate rolling resistance is going to hurt your in flight efficiency.

@mrl0gic

6 ай бұрын

@@Kandrallaplanes have small tires with very high inflation pressure. low rolling resistance is easy if you don't need to handle rough terrain and provide a smooth ride

@Kandralla

6 ай бұрын

@@mrl0gic lots of road vehicles are going to have high inflation pressures. The rolling resistance is still going to be more like a car than a train.

@thekinginyellow1744

6 ай бұрын

@@Kandralla I'm going to respectfully disagree. Aircraft tires are designed for a different set of circumstances than those of road going vehicles. They have a much smaller contact patch and much less flex. Furthermore they are not connected to a drive train the way at least two of an automobiles tires are. Not having to spin two axles, a differential, a driveshaft, and part of a clutch is going to reduce friction even further. To just dismiss this without actually running the numbers is foolish.

@Kandralla

6 ай бұрын

@@thekinginyellow1744 I can guarantee that no company is spending any effort worrying about the efficiency of aircraft tires. I can also guarantee you that they are closer to road vehicle tires in terms of rolling resistance than not. You don't have to run numbers. You just have to look at the materials and know a tiny bit about their applications.

I know a retired railroad executive. He told me once that anyone can get a (even fully loaded) railroad car moving with just an ounce or two of force. Stopping it, however, is a different matter all together!

@demux4555

6 ай бұрын

I've worked on installing the driver's dashboards on highspeed passenger locomotives, and when needed (for example if it started raining, and we wanted to move our work indoors or under a roof) we used to move the locomotives simply by pushing them by hand. Like you say, the force needed to get them moving is the same you need to make them stop, so you need to take care and keep it suuuper slow to avoid big bonks :)

@grandinosour

6 ай бұрын

I remember seeing a television commercial where a Ford truck would pull a train car to show it had power.

@darkstar8827

6 ай бұрын

I saw that one, only it was a chevy!😁@@grandinosour

@RazingthenRaising

6 ай бұрын

@@grandinosour Yep. The new electric truck. The problem is, they used a tow strap that proved absolutely nothing. It could only handle about a ton of load. Those of us who understood totally and completely laughed.

Grady your content is so interesting to watch! And the way you put it all together makes it so easy to be interested and understand! You are one of my favorite additions to my entertainment life!

Total fan of this new format, Grady! Great work! So pro

I smiled to see the kiddy car behind the "grocery hauler", and even more delighted a few moments later to see its "owner" in action. A nice touch.

There is a VERY sad story about this. In the context of a TV contest in Young, Uruguay, the crowd was pulling from an old train to try to get it to move. It eventually started rolling but they could not stop it. Eight people died.

@hugoballs2133

6 ай бұрын

natural selection is a thing

@Monkey_D_Luffy56

6 ай бұрын

Wait seriously? Where can I find some information about this??

@IvanStepaniuk

6 ай бұрын

@@Monkey_D_Luffy56 Wikipedia has an article (only in the Spanish one) as "Tragedia de Young"

@murphychris9811

6 ай бұрын

well dont be dopes and try and pull a train car with out thinking how to stop it

@Railman1225

6 ай бұрын

Probably why in those old videos of railroads showing how easy a locomotive rolls by having people pull it forward/backward, they most likely still had an engineer in the cab to work the brakes. Trying to move something unmanned is NEVER a good idea. Just ask my older sister. Her car had started developing power problems, as in it wasn't propelling the vehicle anymore, at least not very quickly, so it was parked in the driveway for a while. Then, she wanted to move it into the garage, and I volunteered to help. Before we started pushing, my sister decided it would be a good idea to have the car in gear to help us up the hill, which wasn't a bad idea, per se. Not being in the driver's seat during that, however? *_O h y e s ._* Soon as the car reached the flat floor of the garage, it no longer was working as hard against gravity, and suddenly pulled away from us. She tried to get back in the seat, but unfortunately she couldn't in time, and the car crashed right into the door linking the house. Our mom was pretty upset, and justifiably so, especially since the house was a rental. Even after fixing it ourselves, when we moved out a little while later, that accident kept her from getting her deposit back. Moral of the story: never try to move a vehicle _completely_ uncontrolled.

Grady your channel is my second most favorite thing in Texas, behind my son. Since I have entered my second childhood you explaining things in a way an eight year old can grasp is extremely helpful. Muchas gracias amigo.

Another thing to consider is that on a curve, the driving wheels in the locomotive have more surface area contact with the rail, reducing the locomotive’s traction and making the chances of stalling out greater

As a knowledgeable railway historian and railfan/techno-scholar, I appreciate how well you explained this for the masses.

@Matthew-pn1qu

6 ай бұрын

🤓

@mijyadoc5374

6 ай бұрын

hahaha, that's a good one MikeV8652.... but come join us down here in the masses for tonight we celebrate this event by sharing a special chocolate cake no matter the class or ranking. You do love a good chocolate cake, right?

@ducvuong-qt7bp

5 ай бұрын

zzz

@beefyj4597

5 ай бұрын

I agree, this video was very well explained. Keep following your passion Mike

Great video! Having worked for the railroad I can tell you that in the engine shop it was not uncommon for two or three guys to actually push a locomotive on level flat track. One person could keep it moving once the static resistance was overcome.

@cedricrummell5986

6 ай бұрын

I can second this, in our locomotive shop we use a dinky forklift to nudge locomotives without having to fetch a running one.

@AwoudeX

6 ай бұрын

@@cedricrummell5986 we used a bar specially shaped to move cars with ease, up to 6 at the same time

@cedricrummell5986

6 ай бұрын

@@AwoudeX was it some form of "pinch bar" that you use under the wheels?

@AwoudeX

6 ай бұрын

@@cedricrummell5986 yes

@cedricrummell5986

6 ай бұрын

@AwoudeX wow I never would have guessed you could move 6 cars with one of those.

Your content continues to be the highest tier of quality. Keep it up!

I like how he 'stays on track'... And that the kind of workout he does, is on a calculator... Nice easy tuition, with applied wit.

9:38 I love how your little kid was trying to help dad move a car. Thats cute

@masudsaleh5155

5 ай бұрын

Are you a woman?

Its amazing to see the engineering side of railroads and locomotives when my father and his father have collectively spent over 100 years working for BNSF working as conductors combining my love of engineering and my home life.

These are excellent videos for helping to understand why railways are more efficient with bulk/heavy loads. I like this video and the demonstration of the railroad wheel shape videos a lot, thanks for including real life demonstrations as part of your presentation. (Showing you being able to move such a huge rail car with just your own strength and a rope helps to understand just how much more efficient it is to move something on a rail platform energy output wise).

For real thank you for the lightweight bedtime reading, it’s exactly what I need

I've been to the TTM a few times. My late friend, Jim Helmke used to volunteer there. Really cool to see it featured on the channel.

@PracticalEngineeringChannel

6 ай бұрын

Those guys are a lot of fun.

"so, I'll try to stay on track here" 8:17

I bought my Henson Razor after your previous sponsored video. I absolutely love it! I still use my multi-blade razor for the third pass of a 3-pass shave, but that's only when I'm going to a nice event.

Glad you are back in my feed 🎉

If you haven't already done so I'd be interested to learn more about pipelines and how efficient they are at moving liquids as opposed to using rail cars.

@tamtri6218

5 ай бұрын

ok

@vasaaviarion

5 ай бұрын

oooo good idea. now I'm curious

Most of us have probably shipped things by rail without knowing it, by ordering things online. We don't normally get told how it's being shipped, but UPS and FedEx ship a lot on high-priority trains. I once had a package tracker give me a series of locations along BNSF's northern mainline!

@scottfw7169

6 ай бұрын

And if the thing ordered was manufactured in another country it could well have gone from seaport to wholesaler/distributor by rail.

@yuwtze

6 ай бұрын

@@scottfw7169 Yep. When I bought a new car, it was shipped by sea to a port, then by rail to a facility near the auto dealer. Unfortunately, they don't give out tracking anymore, but the dealer staff said they used to be able to watch the tracking as the train made its way across the country.

Always informative and interesting posting, Mr PE!! Thanks for sharing! [Greetings from Tucson]

"I'll try to stay on track." That was the smoothest pun that flew under the radar my friend! 😁 Great job!

7:59 that backdrop was my home town of cologne germany :D

@masudsaleh5155

5 ай бұрын

😅😅😅😅

In the UK we almost never use distributed power on freight trains but our trains are very short compared to US ones, usually a maximum of 30 waggons/cars. I have been interested in US freight trains as they demonstrate the way a few engines can pull a huge amount of material. In the UK the HS2 project build of our newest London to the Midlands train route are using freight trains to carry materials to minimise trucks on the roads during the build of this railway.

@FTW23-qq8nb

6 ай бұрын

Multiple Unit (MU) control is very cool, I wonder if future trains might get electromechanical brakes. And on the matter of brakes it is possible to out brake the wheels by using eddy-current brakes acting directly on the rails.

@Railman1225

6 ай бұрын

Honestly, I think our freight trains have gotten TOO long! I miss the days when our mainline freights were only ~75 cars, instead of the average 110+ today. We need to go back to shorter trains, whether that's by convincing the railroads, or making them with train length limits.

@PanduPoluan

6 ай бұрын

The reason why long freight trains are common in the USA is because of the sheer size of the country. At such distances, the savings due to low rolling resistance is totally worth it.

@Philip271828

6 ай бұрын

@@PanduPoluan It wouldn't be worth having a train that long here, by the time it would have finished departing it would be arriving.

@mikefochtman7164

6 ай бұрын

Well, as with many businesses, some of it is pure economics. There is a 'fixed cost per train' in crews, scheduling, and coordinating. Then there is a 'variable cost' that rises with each car/waggon. The length also has some discrete 'jumps' in cost when another locomotive needs to be added. And of course the market demand. Some goods like coal to a power plant, or other bulk items to one delivery point versus pickup/ dropoff off cars all along the route. Finding the 'best fit' can be quite a challenge. (there was even a game that used this sort of economic challenge, "Railroad Tycoon" I think it was called)

Dude, I love your work. Beautiful video as always!

Oh, and I LOVE how your 'little helper' tried to help out moving your car. And his little car was a lot easier. Sweet!

This is not something I have ever cared about for a second in my life before, yet now I’m fully invested in this, that’s how you know you’re doing something right with your videos

@jovetj

6 ай бұрын

This is the stuff us train nuts appreciate about trains! The physics involved is kinda mindblowing, yet amazing.

@majesticeagle5461

6 ай бұрын

@@jovetj lmao I only read “train nuts” when I saw the notification so I thought you were talking about those truck nuts but for trains😭😭😭 This is very interesting though :)

I love the train footage. I used to live by dual railroad tracks in Long Lake, Minn.

Love how you used a shot of my hometown (cologne) in this video! We celebrated so many parties underneath that bridge :D

The fact is that a locomotive, or series of locomotives cannot pull the entire train from a stand still. This is why there is play (slop or lash) in the couplings and why they back up the train first to take up all the lash in the couplings. Then they begin to go forward they're only pulling the first car, and then the second, etc. When the last car begins it's motion the train has good momentum and can continue.

@Island_Line_Rail_Productions

6 ай бұрын

If you can, it is not always possible to start a train with the slack run in. A train can still be slacked out and be able to start moving

At the Minnesota Transportation Museum, I shoved a loaded boxcar by hand quite easily. I got it started using a tool with a six foot long handle, that sits on the rail and pushes against the wheel. ( with a lever and a fulcrum I can move the world!) Then just pushed the boxcar about thirty feet, pushing with my body. The boxcar had the old style bearings with an oil bath and babbitt bearings. The bearings on the car you tried to push were modern roller bearings, if you had just put more consistent effort into moving it you would have succeeded in moving it.

@darkstar8827

6 ай бұрын

It would have moved easier if the track was level.

@BlueGamingRage

5 ай бұрын

It would have moved easier if he were stronger, too

I recognized that museum immediately! I unfortunately don't live in the area anymore as I've been corrupted by the world of narrow gauge railroading, volunteering as a fireman on old D&RG steam engines, and my brain started buffering when you were talking about maximums of 0.5% grades and 12 degree curves, since I'm used to 4 or 5% grades and 30 degree curves

hey, this was amazing. Never seen any other of your videos. Keep it up!

Thanks Grady, now when I hear those trains at 4 in the morning I'll be a little less upset knowing how much fuel they're helping save. lol

I've always loved trains and love this series. From an economics point of view, you can pay up front for the railway of a train vs. roadway for simple trucking, or you can pay the higher operating costs of trucking. This is why specific point-to-point shipping can be so much cheaper in the long run by rail. A well-defined route that will be used between only a few points can justify the higher costs of building the rail line. Whereas when you need a lot of flexibility to get to many locations, like end point delivery of packages, cheaper roads win out. Really some interesting stuff.

@verdiss7487

6 ай бұрын

Generally speaking, building a mile of rail is less expensive than building a mile of highway. Costs vary a lot but the general estimate is $1-$2 million per mile of rail, and $2-$3 million per mile of 2 lane road. Maintenance is even cheaper, with refurbishing rail in the $100,000-$300,000 per mile and road at over $1 million per mile.

@codeman99-dev

6 ай бұрын

@@verdiss7487Refurbishing costs for rail vary widely. Repair / maintenance of rail is what prevents the existing network on the east coast from improving. Just search for "Amtrak repair costs"

@davidgervais5974

6 ай бұрын

@@verdiss7487 I believe you're neglecting the part where you have to prepare the terrain with tunnels and bridges in order to install the railway.

@Pang-nn4eq

6 ай бұрын

Trains also are not subsidized as much as rubber tire transport. Trucking freight literally makes zero sense economically. It's the largest industry in terms of subsidy there can be. We're destroying the environment, city landscapes and people's lungs with one single economic imperfection.

I am a highschool student and i love your videos keeping us educated whenever you come to greece again my home is open for you keep up the good job

Another advantage of trains (especially at higher speeds) is the relatively lower air resistance compared to buses or trucks (depending on if you're moving people or stuff). With all the cars in line with each other, the first locomotive takes most of the air resistance and other cars get some drafting benefit. This is most easily seen in the perfectly contoured coaches of high speed rail.

12:21 new channel logo confirmed

13:33 The brakes. Always check the brakes! 😂

Nice to see a bridge from my hometown in Germany in a practical engineering video ❤

Love your work friend. Keep it up!

I think it’s interesting to include some of the differences between diesel and electric locomotives, as electric trains can recover a lot of energy on downhill sections of track and are vastly more efficient because of this

Great video, I laughed aloud at the bits of humor. And your helper is Maximum Adorable! I was really astonished that you could move your car like that, and even MORE astonished to understand the forces are so similar even though the rail car is so much bigger! This really made clear just why (and how) trains are so much more efficient within what they can do. I was also kinda proud of myself for looking at your little three track options illustration and going immediately for the tunnel-and-bridge choice. I've learned from you! I wouldn't mind a deep dive series on tunnels later on, myself. I've been on a passenger train just once, but along the route we traveled through THE tunnel that John Henry helped build. And the city I live in is a literal railway hub, so I hear trains all the time, and our downtown area is laced with tracks. Heck, there's even the Rails to Trails program here, where they've taken sections of old, retired rail track and transformed them into paved paths for bikes and hiking. It's truly been fun already watching this series, and I've learned a lot too!

I can see how the production quality of your videos have increased, without sacrificing personality. Keep up the great work!

I'm less than 2 minutes in this video and I'm totally committed to listen to it very carefully. I love this talk about real-world problems, and the solutions thereof.

3:10 - I currently live a couple of miles from the Tehachapi Loop. To cross this mountain grade, the path is lengthened, by creating a loop, to minimize the grade.

Thank you for preparing this video! It's one thing to know "trains are more effiicient", the demonstration really helps to make understanding natural and easy.

"In a perfect world, a wheel is a frictionless device" Sir, I thought you were an engineer.

Fascinating as always Grady

It never stops amazing me how better you get with each video at explaining the different topics

GREAT video. I would have never have guessed the rolling resistance if the train car would be only 50 lbs..

Very interesting Grady. Never knew so much went into train transportation. Stay safe

HAHA, I LOVE your "Practical Soup" graphic, complete with your helmet-head icon as the Campbell's gold icon!

10:00 One of my jobs as a railway clerk back in the day when train tonnages were figured using an adding machine, we'd add seven tons per car to account for rolling resistance.

Fun fact: LKAB (Swedish mining company) uses the worlds strongest electric locomotive to haul 750 meter long trains, total weight of 8.200 tonne. They use one (they are double locomotives), in the front of each train, and they run up to 20 trains every day. The type of locomotive is Iore. 10.800 kW. 1.400 kN starting force.

@The901meister

6 ай бұрын

10,000 ton trains are quite common in the USA and lengths of 10,000 feet or more with as few as 2(4400 horsepower each) locomotives. Power can often be lower than 1 horsepower per ton.

@Xanthopteryx

6 ай бұрын

@@The901meisterThe difference i think might be the environment they are driving in. Here some aerial views of the tracks: kzread.info/dash/bejne/i4insI-Hf7rgoto.html And here a nice night view of the train: kzread.info/dash/bejne/i2mZtsSRd6-ToMY.html The track is roughly 500 km long.

Hey super cool. I live just up the hill from that black train trestle you featured. Have walked across it many times. Built around 1890 to 1900.

Hi Grady. I'm almost done with my engineering degree and I just wanted to say thankyou! I have learned so much of the iintuitive thinkingand logic behind how the real world works from years of coming across your videos, almost more than i have at uni. Sure ive learned how to put the physics down on paper and how to calculate/read the more nuanced things like S-N curves, etc. But the basic logical understanding comes from real world examples like this and I just wanted to say, thankyou, thankyou, THANKYOU!! For doing it. Not jsut for me but so that everyone who watches these videos can learn a little bit about how the world works"

You can easily get the car moving with a cowbar. Just put it between the wheel and the track in an angle and press it down. And next time they need to move the old car around for a few minutes. The grease gets to its place at the right temperature. Newer cars got different bearings, they are easier to get move.

6:55 "Listen closely..." No need to listen closely, the sound of a train negotiating curves can dominate the soundscape.

@mudassirshaikh8662

3 ай бұрын

True bro, that shi kills your ears irl

Always a fascinating experience of engineers thank you

You are the Bob Ross of Civil Engineering. I mean that with the highest praise, as someone who is such a master of their craft that they can teach it to anyone in a way that makes sense. Bravo sir!

You should have a look at the kiruna narvik line in northern Sweden/Norway it uses regenerative breaking (you can feed back power to the grid if your railway is elecrifed) when going to fast down hill, in fact this line is a net producer of power, since the ore moved from the high altitude at kiruna down to the sea in narvik, but you in the USA don't have that much of electrified railroad =(.

@CookswellCoKenya

6 ай бұрын

good point i was going to say! clever swedes!

"The only working out I do is on a calculator". That one made me laugh

Today I recommended your channel to my neighbors who have an inquisitive 2-yr old boy; he is fascinated with all things that move. It's my effort to get kids interested in science. I hope you keep your videos rolling!

Excellent video, especially your little helper.

Did the little guy push the car at 09:46? I saw it moving backwards for a fraction of a second. Someone tell Clark to call down.

@vitamins-and-iron

6 ай бұрын

i saw that too. it rolls backwards when they stop pulling, but then it stops. when he pushes it, it starts moving again!

This is a perfect video to watch on the train on my way home. Very informative and well made video👍

The best feature of your video, are these funny, old-fashioned units, used in the U.S.A. Many thanks, from a technical physicist from Europe. I had a good laugh, but also learnt a lot about mechanics. Also thanks for that beautiful picture @ 7:52, of my birth town Cologne, with the famous dome. Ever been there?

8:06 for the people who doesn’t know, the Tehachapi Loop in California, one of the engineering wonders of that day