Paul, it is great to see the increased frequency of your videos. Your knowledge is in the outdoors is vast and I appreciate your willingness to share it.

Used a Laplander for years with no issue, “upgraded” to a Silky and bent the tip on my second outing. The Silky was definitely more aggressive, but for the sake of a minute more sawing, I will stick with my Bahco.

One of the things I've picked up about Bushcraft, from courses with Paul at Frontier, is it's not about the kit, but what is in your head! Consequently I vary rarely change the kit I use. I have my original Bahco Saw, with the third blade, my Mora Stainless Steel Garberg, bought after watching a PK video on it, and a GB Forest Axe I got on my Woodlore Campcraft course. It's really good, reliable equipment that I can rely on and I know how it works and what it can and can't do when I'm out. I don't understand the habit of collecting different knives, saw, axes, tarps, rucksacks etc. Some people I've met are like a walking warehouse of Bushcraft gear! If you are just starting out, buy decent equipment and do courses with a reliable instructor. By coincidence, one is speaking in this video! 😉👍

@vonsprague7913

7 ай бұрын

I can't agree more, too much kit takes something away from the experience in my opinion. I also agree that buying the best kit you can afford when you first start will save you a fortune in the long run.

How does Paul ONLY have 67K in subs when there are absolute clowns out there with a million! 😯 One of the FEW channels on KZread that I trust. You deserve way more subs Paul.

@fizzlebug

7 ай бұрын

Well, clown people usually like clown youtubers. People would rather subscribe to fantasy than to reality,

@PaulKirtley

7 ай бұрын

I think it's becuase I have been inconsistent with posting here on KZread. Because I have a day job of teaching and guiding, KZread has always been a nice-to-have addition to the way I can reach people. One of my missions for next year is to be much more consistent with my posting regularity. Let's see if the YT algorithm picks this up and shows my videos to more people.... Thanks for your support and positive words; they are much appreciated! Warm regards, Paul

@YankeeWoodcraft

7 ай бұрын

@@PaulKirtley Well, I admin well over 60K members in my 2 Facebook groups. I'll be posting your channel there. In a world of make-believe survivalists out there, we need more real world instructors. Cheers!

@susrev88

7 ай бұрын

@@PaulKirtley i've noticed that your channel is gaining a steady traction lately in terms of subscribers so i think you're on the right path & i'm glad. i also had the same impression as YankeeWoodcraft - lot of mediocre channels have tons of subsribers.* HOWEVER, subscriber count is deceiveing because it does not really correlate to the number of viewer interactions or view count (ie bots or paid/bought subscribers). Nowadays, since the attention span is like 30 seconds, youtube shorts have taken over the long video format. So it depends which demografic you intend to reach (tiktok generation vs "old" viewers). It's a good way to revisit old videos, though (ie create trailers from/for them or create some quick tips videos). The algorithm also like interactions like like/comment/community options (ie post a note about new video, ask questions or create polls, etc). *it's because it's more about promoting their business, sponsorship, ads revenue, etc than creating actually informative content and they invest in youtube marketing strategies and professional editors. They do a lot of endorsements which makes their "review" really vanilla/biased because youtube is one (if not the only one) of their income streams. they basically sell out which undermines their authenticity, and the latter is priceless.

@PaulKirtley

7 ай бұрын

@@YankeeWoodcraft Thank you. I'd be very grateful for you sharing my channel or any of my articles or podcasts you think are suitable. Cheers!

For the cord question - Atwood Rope makes Micro Cord, and Nano Cord in many different colors. These are excellent for the purposes described, and quite freely available online, for not too much money. Extremely strong for its size too.

Waxed unflavored dental floss is a great repair thread. For folding saw, I have a Wicked Tree gear saw. I've used it for a number of years. Here's the specs if anyone is interested; Closed Length: 8.25 in Blade Length: 7 in Teeth Type: Tri-edge design Teeth Per Inch: 7 Blade Material: Wicked Tree High Carbon Steel Handle Construction: Cast Aluminum with Rubber Grip Locking Mechanism: Hardened Steel Lock Pin Total Weight: .50 lb Warranty: Manufacture Lifetime

I know it's not the most efficient saw but I like that we don't need to carry a spare blade for the bahco laplander...it's simply not going to break.

Thank you for taking the time to make, edit and post these videos/podcasts.

Just bought my first saw and swithered between Laplander and Silky Pocket Boy for ages. In the end went with the Laplander basically because it was half the price. Maybe the Pocket Boy _does_ cut better, idk, but I bet it doesn’t cut twice as well. Anyways, I am so far very happy with the Laplander.

@dtl5623

6 ай бұрын

Me too. The Laplander was more cost effective.

@lyndonmarquis414

6 ай бұрын

@@dtl5623 For sure! Nothing against the Silky but the thing I could afford does the job almost as well so…

@dtl5623

6 ай бұрын

@@lyndonmarquis414 I'm not exactly fluent with using tools. Because the Laplander is more flexible I'm less likely to break it 😆.

A dyneema style fishing line would b the one for line and sewing. Very thin and extremely strong 💪

@PaulKirtley

7 ай бұрын

Good call!

@fudoshin811

7 ай бұрын

It might be worth checking out it's knot holding capability first, as dynema is notorious for slipping as far as knots are concerned. Also, it degrades faster than nylon. Hope this helps! Cheers!

The Barco does cut both ways, not just on the pull cut. while the Silky is just a pull cutting saw. That would have been nice to clarify in the video, it goes a long ways in having people realize why their silky breaks. Yes it requires force to return the saw to the start of the pull cut. Usually and most of the time a broken Silky is due to user error, and that can happen to all users, some more than others. I have never had a Barco but wish to get one for the reason you point out to use in rescue times, at that point you don't want to be fiddling with just a one stroke saw. Yes the silky is faster and more efficient and I grab onto that feature and use Silky saws in bushcraft and my timber framing work in a professional world. I just used my Pocket Boy to split the rib cage on a deer I harvested this past November, I have not tested it to see how dull it is now but I suspect I didn't do it any favors, I bet the Barco would have performed better.

braided fishingline like powerbraid or spiderwire

@PaulKirtley

7 ай бұрын

Yes, that would also be good!

@davefloyd9443

7 ай бұрын

The thinner braids will cut your skin easily and would likely cut through fabrics if you lashed tightly with it. Thicker stuff would be ideal but maybe not for smaller fish.

@najroe

7 ай бұрын

@@davefloyd9443 I use 0.12mm. if sewing I just twist it and fold double before threading the needle, use a piece of cloth behind the button to keep thread from cutting the cloth. Also I have a pre tied 25-30 cm flourocarbon leader on all my hooks and fishing flies (or 5kg wire), yes it is possible to cut oneself with it but I have caught 5.1kg pike using it with a "hobo" handline so not impossible

@willwetherington

7 ай бұрын

30-40lb would be perfect. You beat me to it! Lol

Hi Paul, a great load of info as always. I may have discovered by accident why things were playing at double speed. Just sat down to watch this with my evening meal (sausage casserole slow cooker stylie) Whilst eating from from the crock, I know, saves on washing up! I placed it down on my laptops mousepad and immediately you were on Helium and waving your arms around like a madman. I also agree with the robust ability of a Laplander, having witnessed a demonstrator break another well known folding saw blade, in a race against a Laplander to cut through a three inch branch, after that I'm not so sure the winner was quite so happy to receive one as his prize. Also with a bit of care and an eclipse saw sharpener I have managed to set the teeth on a Laplander to increase the Kerf and give it a whole new lease of life without actually sharpening it, because over time the teeth just seem to all form inline rather than having the edges exposed.

I've had two Laplander saws break at the lock open/close on the inside, not the plastic button. I still prefer them and the two broken ones were second hand.

So glad you're back, Paul! Always good to hear your thoughts. For improvised fishing line - I would also suggest Dyneema, as someone in the comments below did. It's used by the marine industry, so I assume it works well in water. And by breaking it, you can get down to a ridiculously small diameter. Kite lines also seem like a good direction - I was looking for cheap Dyneema some time ago and found that kite lines are usually made from Dyneema these days. I think I've finally been sold on the idea of a small forest axe from Gransfors Bruk. I've resisted for a long time (it's a lot of money), but I think it's finally time to have something reliable and extremely high quality. Thanks for being so cool and solid about your choice of equipment, it helps me a lot to choose wisely and not get too excited about overhyped toys.

Thanks Paul, as always great information 🌳🌲

@PaulKirtley

7 ай бұрын

Thanks Nick.

Thanks for posting again on KZread Paul!

I own three different Silkys. Never broke a blade but I did bend the one on the Gomboy (I was able to straighten it). Got my first Bahco recently and it works better than expected. I quite like it TBH. Considering the price gap between Silky and Bahco, the latter is a great value and a no brainer if you're on a budget.

Thanks for another episode brother, I want that tea pot!

@PaulKirtley

7 ай бұрын

Haha thanks Dave. You have kettle envy,,,,,

As Dave said to pause the video and buy Paul’s books sooo I have done exactly that and is now waiting for pay day. Can’t bloody wait. Love the videos mate, u r one of the best bushcrafters around 👍🏻

Good to see you back. Talking of folding saws: I used to work as a gardener and used aggressive tooth blades, mostly cheap Florabest ones that work fine. They are better for rapid wood cutting but I prefer the Laplander for woodworking. For more crafty cutting, it is just better, as well as being highly durable. I have your axe book, a good and useful read. I have a Granfors small forest axe and it is hard to fault, if expensive but I seldom use it these days. I enjoy restoring old axes (mostly found in flower beds, or abandoned in sheds. I tend to use those. No better than the Gransfors but as good and there is the pleasure of using your own work. Keep the videos coming, they're essential viewing.

I was thinking about getting a Silky pocket with the extra fine teeth for helping with carved artwork with dry wood.

@canadafree2087

7 ай бұрын

You are heading in the right direction with the teeth per inch of soft wood vs dry wood saws. Laplanders come with various blades but I find them hard to get except for the standard.

When listening to pod cast on iPhone bottom left just above volume bar is x1 this is speed setting , you can chose the speed of replay. Try 0.75 !

Thanks Paul,nice one.

Thank you, much appreciated ❤

Another excellent chat Paul. I look forward to these. 🏕🍻

Kite stores have line made from Kevlar. Great for multiple uses. Thanks for another great video. 👍

+1 on ordering Paul's book. Got a copy for my birthday this year - love it!

My more general thoughts on scandinavian axes. When I had to decide to buy one years ago I compared Gränsfors, Wetterlings, Hultafors and Husqvarna (no chance to test a classic axe from Finland until now) an I chose the Husqvarna because it was a discount offer at that time. But the price wasn't the decider, it was the shape of the axehead. The Wetterlings and the Gränsfors have quite flat blades compared to Hultafors and Husqvarna (I think, these are made by Hultafors for Husqvarna because the axe heads looked absolutely similar). Looking at the cross section profile of the Husqvarna blade it was slighly but clearly convex which optimizes the splitting performance and reduces material contact when driven into the log without really minimizing the felling performance. Most axe work outdoors is splitting firewood. That was the argument for me to choose this axe and it works perfect for me over the years using it.

Thank you Paul! Always gid to see ye get that gid chat out there

Try dental floss as a thread and fishing line. It’s incredibly strong, light and cheap.

You did "welcome, welcome"! ❤😂

Hi mate I would love to get your signed book 🥰for my son's Christmas present but your all sold out 😭 Please please try and get some more in before Christmas I would love to purchase a signed copy

I just use cheap old Fiskars saw and have for years. It still works fine

@PaulKirtley

7 ай бұрын

Great!

Still trying to figure out what sort of pot suspension deal you have rigged up, bad angle LOL. I recently picked up a Corona Razor saw, and I think its the happy medium between Silky and Bahco. Cuts fast, plenty tough. I dont hot tent, but I generally upgrade my axe if I'm not bringing a saw. If I can mostly stick to timber less than 6" in diameter a larger axe seems somewhat more efficient than a saw to me.

emergency repair line unbreakable in normal use to go with a large eyed needle, dental floss

🍁🙏🍁Thank you🍁🙏🍁

Can someone use a small forest axe in a large forest?...and that kettle has been boiling for ages..

👍

Hi Paul is that the vargo or snow peak titanium mug and has it replaced the crusader cup thx?

That Tony bloke sounded a right tool…… oh hang on, it was me!

@PaulKirtley

7 ай бұрын

🙃

Paul your book is sold out on your website :(. Amazon still has it but I thought buying from your site would give you a bigger cut I love the dry humor of some people say you talk too slow and you think some people have too little attention span

As always

I dunno what these Gransfors thingies are, I never had one. I have one of those Bulgarian bearded axes from Etsy and I can tell you that is the sharpest and cuttiest axe I have ever owned, bloody 'ell I am sure I could cut a redwood down with one (not that I would want to) probably need a Bahco or a Silky saw mind, cos they are well trendy innit, have to make do with whatever my local garden centre is flogging. I certainly do not buy into this brand name BS as the only brand name in tools I care for is Elwell, (I am showing my age here). Seriously I find anything that is as old as I am a lot better than anything that is currently manufactured under licence in China, if it is vintage it has been tried and tested for sure, Chinese steel seems to have the consistency of cheese and I have had cheap spades break, not the handle, the blade!!

As you know Paul I love your content and absolutely everything you do but I this upload was making me twitch, that kettle needed to be taken off the fire and placed next to it to stay warm

@PaulKirtley

7 ай бұрын

haha it was fine, it had 5 litres of water in it.

Background looks fake. I dont like that.