Looks clean like the set up!

@edcardiy

3 жыл бұрын

Glad that you liked it, Thanks for watching!👍

Great video, wheels look great I am considering these for my M235i

@edcardiy

3 жыл бұрын

Yes these wheels looks great and very affordable, Don't forget about the wheel offset when buying your wheels, Thanks for watching!👍

Excellent esplanation about wheels offset. Thanks. Very usuful.

@edcardiy

11 ай бұрын

Thanks for the comment, I'm glad that this video helped you in anyway. More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

Very nice 👍🏼

@edcardiy

2 жыл бұрын

Thanks for the comment! Please LIKE & SUBSCRIBE to Help this channel grow, Thanks for watching! 👍

This is great

@edcardiy

3 жыл бұрын

Glad you enjoyed it, Thanks for watching!👍

What is your review on the indy 500’s? Just got the same size wheels as you and I just wanted to make sure that you were happy with the indy 500 tires. I want to use for daily/backroad driving and occasional one day track. Thank you!

@edcardiy

Жыл бұрын

Hi, Indy 500 needs to be warmed up before getting maximum grip, Once heated up they were excellent. Please LIKE & SUBSCRIBE and Thanks for watching!!!👍 By the way I like your M2 front bumper conversion, Great job!

So did you have to use any spacers for this setup or was the 40mm offset fine and caused no issues? I'm looking at getting 18x8 40et 18x9 40et with the same tyre sizes as yours. I'm lowered 15-20mm all round as well and just want to make sure I have no problems and don't need spacers etc. Thanks 👍

@edcardiy

2 жыл бұрын

Hi Dan White, This set up have no spacers, I got 40mm all around, I got the same size mags 18x8 40mm & 18x9 40mm, this set up will not have any issue on lowered m235i, You can add 5mm spacers all around after to look a bit wider, but you might rub when you have passengers on your car. Please LIKE & SUBSCRIBE to HELP this channel grow, Thanks for watching! 👍

@danwhite5

2 жыл бұрын

@@edcardiy brilliant thanks so much for the advise. Also what tyre pressures do you run on this setup? And thanks I will subscribe, keep up the good work

@edcardiy

2 жыл бұрын

Hi Dan White, Since I'm basically running the same as stock 18 mags, I followed the BMW recommended tire pressure, 32psi at front & 38psi at the rear, This is for a rear wheel drive car, Thanks for subscribing, I really do appreciate that. Thanks!

I have a doubt. I found advan tc-4 wheels for a very good price. But her configuration is 9j x R18 +53 all four wheels. Do you know if the BMW 235i 9j front wheels fit?

@edcardiy

2 жыл бұрын

Hi there, +53 is a high offset for the 9 inch width on the front wheels, you might rub on the front suspension, You might have to install it with a 15mm or even 20mm spacers to prevent from rubbing on the inside. Please LIKE & SUBSCRIBE to Help this channel grow and Thanks for watching! 🎄

Can you list what kit you used to lower your car and how much it was lowered exactly? Thanks

@edcardiy

2 жыл бұрын

H&R lowering springs and lowered by 1 inch all around, You can check my DIY video on how to install the lowering springs ( kzread.info/dash/bejne/oGaLs7eAcdK8gbw.html ) Please LIKE & Subscribe and thanks for watching!👍

@Mac58058

2 жыл бұрын

@@edcardiy how’s the ride compared to stock

@edcardiy

2 жыл бұрын

The ride feels like stock even with the H&R lowering springs, Maybe because of the adaptive suspension that controls the ride feeling.

What spacers are you running the front and rears?

@edcardiy

2 ай бұрын

I'm not running on any spacer on my current set-up right now, Here is my latest wheel set up (kzread.info/dash/bejne/Ypqa2NiOXZPepsY.html ). Thanks for watching!!!👍

So I’m planing on keeping my car stock height (2015 M235i) when I’m looking for wheels some sights say I can’t run a 18x8 +35 that I need to stick to +45. So my question is the wheels I’m looking at are 18x8 +35 front and the back they have the option for 18x8 +40 and the second option is 18x8 +38 and 18x8 +42. All those fit a stock ride they’ll just look either flush or deep (concave rear) ?

@edcardiy

10 ай бұрын

If square set up (18x8) all around, just stick to +35 offset all around, if you want wider rear (18x9) then go for higher offset than +35 to compensate for the wider rear wheels. if 18x8 all around then +35 on fronts & +42 on rear, it would look weird, rear wheels are way more inside inner rear fenders. More Mods & DIY coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

@I_kill_hooez

10 ай бұрын

@@edcardiy what you think about 18x8.5 front and 18x9.5 both +35?

@edcardiy

10 ай бұрын

the front might rub if you lower the car, for the rear do +40 or +45 to be safe, +35 will rub when lowered or carrying passengers.@@I_kill_hooez

How much lowering springs you added on the car? 25mm ?

@edcardiy

6 ай бұрын

H&R lowering springs drop spec were 1 inch all around, It doesn' t look much but when installed it looks too low. More DIY & Mods coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

What are the bolts configuration? 5x120?

@I_kill_hooez

10 ай бұрын

Yuup

Hi Ed hope you can help me out. I’m looking at wheels that are 18x9.5 et38 for rear and 18x8.5 et47 for front do you know if these will fit? I appreciate any help I’m struggling with these fitments

@edcardiy

Жыл бұрын

57veggie, It all depends if your car is lowered and the size of tires you have, I think that the 18x9.5 et38 is ok if your car is not lowered (tires may rub the fender slightly if lowered), but for the 18x8.5 et47 it may rub on your suspension (lowered or not), the offset is too high. Hope this helps you. Thanks for watching!!!👍

@57veggie

Жыл бұрын

@@edcardiy thank you! I’m looking at Work D9rs. I’m not lowered at the moment. Front wheel also come in et38 option would this be better than 47? If my tyres are 255/35 rear do you reckon they would Rub?

@edcardiy

Жыл бұрын

The front wheels on et 38 would be better than et47 on 225/40/18 tires, for the rear 255 /35/18 tires on 18x9.5 I think would be ok. I just got my set of 19s today with tires, Video is coming soon, Can't wait to install this new set.👍

@57veggie

Жыл бұрын

@@edcardiy thank you so much for the help! I’ll be sure to watch the 19s video. Maybe you will sway me to buy 19s instead

@57veggie

Жыл бұрын

@@edcardiy whens this coming?

Sooo I have no idea what the wheel and tire specs are here aside from the offset and a 40 series ?....

@edcardiy

3 жыл бұрын

Sorry about that, You should watch my previous video when I've just received the new wheels and tires where I explained all the details. Please Like & SUBSCRIBE , Thanks for watching! 👍 Here is the link: kzread.info/dash/bejne/Zneuu5qHmsW0Yco.html

Why not get lower offset to avoid using spacers if needed. I have 30 offset and they fit flush

@edcardiy

9 ай бұрын

That's a good idea but it also depends on the width of the wheels to prevent the rubbing, Once it rubs on the offset that is selected, there is no way to fix, unless getting a camber kit to do negative camber. But if getting the higher offset wheel you can select different spacer to dial in the fitting with no rubbing (spacers are much cheaper than camber kit). More Mods & DIY coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

What about for a 19 8.5 I have stock suspension 2018 F23 230i. ___________________ Front 225/235 35 - offset +45 Rear 245 30 - offset +45

@edcardiy

Жыл бұрын

Mr. V, Sorry for the delay, Is your car an XDRIVE?, Is your car lowered? What size of tires you have now? (front & back), What is the size & offset of your mags right now? (front & back). Let me know before I can answer your question about going to 19inch set-up. Please LIKE & SUBSCRIBE and Thanks for watching!!!👍

@MrVuittonDon

Жыл бұрын

@@edcardiy no xdrive (it's RWD), stock suspension, stock tires aand wheels 205/40/17.

@edcardiy

Жыл бұрын

@@MrVuittonDon Mags 19x8.5 offset of 30 to 45(lower number wheels were more out, wider stance) bolt pattern 5x120, tires 235/35/19. hope this helps, Please LIKE & SUBSCRIBE, Thanks!!!

@MrVuittonDon

Жыл бұрын

@@edcardiy why not go staggered?

Are those 18's or 19's?

@edcardiy

7 ай бұрын

Those were 18s, Just installed the 19s this last summer, go check out this video (kzread.info/dash/bejne/Ypqa2NiOXZPepsY.html) More Mods & DIY coming soon, Please LIKE & SUBSCRIBE and Thanks for watching!!!👍