That's crazy 🤪 Brandon. Glad you are wearing a helmet. You always liked to play in the mud!!

Hell yeah man thats awesome! The wheel horse is a beast now! I really hope we will be able to hit up the trails sometime!

Very cool. I just replaced my 416-8 Wheel Horse belt and it has the belt brake built into the body from the factory and uses only 1 idler pulley with a 5/8 by 83 inch belt. It also has two guide pins on the engine which keep the pulley on when shifting. It also has the bolt on cover as well without the. Rounded pulley cover on the engine since I still have the stock drive pulley and PTO setup. I am trying to put in a dual pully system so I have a on the fly high and low speed off the engine drive pully using the PTO to shift. So I would have 16 speeds instead of 8 I have now or a 416-16 Wheel Horse.

@LilBJessup

Жыл бұрын

On the fly high low sounds awesome! A dual belt system sounds very cool!

great video. now i need a tutorial for bushing the frame where the clutch sits thats as high quality as this one lol

That bottom pulley was definitely not big enough because the smaller it gets, the less friction and surface area you’ll have. That pulley comes off the gearbox doesn’t look stock too. But great solution! No I have some ideas for mine. 😀

Thanks for sharing! Bet youre gonna be checking every belt from here on out, subscribed

@LilBJessup

Жыл бұрын

Almost did your holey pulley mod also, but going to try it out first

@redzz02

Жыл бұрын

@@LilBJessup gotta thank Mr Studabaker for that mod hes the one that pushed for us belt folk to finally try it out

@LilBJessup

Жыл бұрын

I want to make it out to a ride with you guys sometime

I found this interesting from alison sadler England 🇬🇧

More wheelie shots!! 😆 That was a lot of effort but it definitely paid off!!

@LilBJessup

Жыл бұрын

Lol, this thing is unpredictable to wheelie, unlike a bike where you can find the balance point, this thing is like trying to wheelie a school desk. Once it gets up, it just keeps going until it flips lol.

@twobikesandadrone

Жыл бұрын

@@LilBJessup It's okay to admit if you're scared? 🤣 Giving you a hard time since everyone here knows you aint scared!!! Maybe scared of losing to PJ.....but that's about it!

@LilBJessup

Жыл бұрын

@@twobikesandadrone lol looks like I need to make a video this week about wheelies, look what you did!

@twobikesandadrone

Жыл бұрын

@@LilBJessup If you jump to over 2k subs after that video..........I'm takin credit 😂

Got the same mower, tryin to make it hit 40 hope you don’t mind me stealing ur clutch set up 😂 I subscribed hope that makes it even, loved the video.

@LilBJessup

Жыл бұрын

Goodness gracious! 40!? Man when mine gets up around 20 it feels sketchy

@Chevy-yl3nb

Жыл бұрын

@@LilBJessup dude idk ima just send it and see what happens thinking a 6 or 7 inch off the stock 12 horse engine to a 3 or 4 maybe on the transmission. Just gonna play around with it and see what speeds I can hit, plan on slamming it to the ground later on, she looks like yours just a rust bucket version😂

@LilBJessup

Жыл бұрын

@@Chevy-yl3nb be careful with the smaller trans pulleys, they tend to have a lot of belt slip. Fit the absolute largest pulley you can find on the motor and keep like a 5inch on the trans.

@Chevy-yl3nb

Жыл бұрын

@@LilBJessup will do thanks for the help, might just leave the stock trans one on and see what happens, maybe I can find a 8 inch for the engine, I’ll let you know how it goes! I’d be happy with at least 30 mph

That was awesome I like it that's what I want to do to my wheel horse but I ain't had a chance yet but it will get done that is very cool👍👍👍👍👍✌✌✌✌😎😎😎😎😎

@LilBJessup

Жыл бұрын

It works really nice! I highly recommend

@johnrodgers1968

Жыл бұрын

@@LilBJessup I hear you on that

were can i get some pulleys? IE:" DIFFERENT =sizes, for engine and trans? i got a b100? wheel horse, with the stock 10hp kohler. I wanta bring the top speed up a few mph..

@LilBJessup

6 ай бұрын

I got mine off amazon, measure the drive shaft of each pulley and go from there! Best of luck!

I have a c161. It had an automatic in it. I put a 8 speed in it ,out of a c160. Can the brake and clutch be on the same pedal? If i mash the bar down with my hand it will work the clutch. Just wondering. It looks like it will work. I also will try and do a pulley upgrade. I also locked the rear axle by welding it.

@LilBJessup

11 ай бұрын

From the factory the brake and clutch are on the same pedal. I rigged it up so it isnt.

How is low range now? Will your tractor still be able plow?

@LilBJessup

11 ай бұрын

oh yea, in low it still goes very slow

14:34, did you just bang shift?!?!

@LilBJessup

Жыл бұрын

Absolutely, the best way to go from 2nd to 3rd

@denisc958

Жыл бұрын

@@LilBJessup bad ass!

You built a racing tractor. The engine pulley is way to big for gear # 3 take off from dead stop. 19 mpg is too fast for safe tractor operation. Just saying.