I like this video a whole lot more than the one made by a company that sells tools. Ask a tool company what tools you need to do your job, and they're going to load you up with as many tools as your credit limit will allow.

I just got accepted to a diesel apprentice position after working at a small automotive shop for a couple years. This video is great and helped me feel a little more prepared for my next job! Thanks for posting!

When you buy battery powered tools, pick a brand and battery system and stick to the same battery system. That way when one of the batteries runs out of power you can barrow a battery from another tool and keep working. I'm a fan of Milwaukee's m18 tools.

@stitchthisditchthat259

2 жыл бұрын

Eventually we all give in

I'd like to add: For a new tech starting out, the MOST important tool you can develop is the ability to be taught and learn along with a great attitude. My previous shop I was tasked with evaluating lube techs by having them work along side me on the heavy line side for a day, helping and learning. Some were great, some not so much. I'd meet with our shop foreman next day and give my opinion if I thought they might be a good asset on the more experienced side. They would have the new tech do that with 3 or 4 of us senior techs, each giving a recommendation Yay or nay. I found that part of my job very satisfying, knowing my decades of experience was being passed on.

You did an excellent video on what tools to get besides tool truck tools. Yes tool truck tools are “the best” however they are expensive. If you are either just starting out, or don’t care about tool truck tools the list of tools that were given are definitely a great choice of tools that will if used correctly will last a lifetime. Thank you for taking your tool box apart to show the tools! 😢

I'm 30 yrs old getting out of the military this year. If I lived near you id stop by once a week bugging you to take me in as an apprentice lol. And that's sayin a lot! you're a good dude keep it up

One thing I have done after being a diesel tech for almost 20 years is buying my tools from pawn shops. I have found most have tool truck brands at super low prices. I recently acquired both standard and metric double box end wrench sets for $200. Both those sets would have cost me $1800 off the truck. Also found my mac roll cart for $275. It costs almost $1k on the truck. That's how I have saved a ton of money on tools.

@rpatrick2

4 жыл бұрын

Came here to suggest the same. I am always a little worried that I am buying tools stolen from someone's truck or garage.

@raymondromero4558

3 жыл бұрын

I don't blame you, I've been doing that for , watches, sounds systems for cars, tools, etc, etc

@eoleol4750

Жыл бұрын

I'm a pawn shop guy, haven't been in a while and forgot about pawn shops. Thanks for reminding me.

@sophiasocal68

Жыл бұрын

Just bought a brand new snap on MG325 impact in Green from a pawn shop that had it listed on ebay. I paid $139.00 dollars for it with free shipping. This impact lists for close to $600.00

When I switched from aircraft to automotive, I jumped from all hand tools and hourly, to be as fast as possible and flat rate, the snap on guy loved my big purchase of impacts and cordless lol

@caleb9422

3 жыл бұрын

Curious on why the switch from aircraft? I've heard it's kinda hit or miss pay wise where I live in Memphis TN unless your in it for the long haul. I've considered doing the FedEx program but I just hear so much conflicting issues about going aircraft.

I would like to add you really need a large sledgehammer, maybe get a 4lb mid length handle and a long 6lb. These come in handy pretty often anything from stuck drums to stuck wheels!

@danieltubbs458

4 жыл бұрын

Yeah he mentioned shortly the Wilton Sledge Hammer

@WhuchakaV

3 жыл бұрын

Impact gun with a 1 3/4 socket. Weld a ball bearing to side and slam that shit into anything bounce it right off.

@WizzRacing

2 жыл бұрын

No kidding.. A good 3-5lb set of hammers. Short and long handle. As it seems you have to hit everything. Yeah it's nice when everything is clean. But try working on Salt Belt State vehicles.

Lol, that's so funny I did just that and bought harbor freight impact everything. All the older mechanics were like don't buy that cheap junk it will break and you will get hurt. That was 12 years ago, I have, only broken 1 socket did not get hurt. I have added nicer tools along the way. I have a nice mix now.

Great video, sound advice. The biggest thing for starting technicians is you will have to invest in tools throughout your career, accept that fact on the front end! You do not have to have every tool snapon or matco or whoever makes, like you said, be smart in your decisions, look to the other name brands for quality tools that you can buy and pay cash for and use the tool truck account for bigger purchases like torque wrenches or impacts. Great content as usual and hope it helps a greenhorn starting out!

My buddy referred me to watch your videos and they're so helpful and insightful

Future tech here. This is the best video by far on what tools to start out with. Love this channel!

@KoonTrucking

4 жыл бұрын

Thank you very much for saying that. I truly appreciate you watching and taking the time to leave a comment.

If it is Wally proof it is a good tool. If Bill owns one it is a good tool. I have watched Bill he is very wise about what he buys, he never gets sucked in by the tool trucks. Thanks for the video. My personal collection of tools has improved so much by watching what professionals use. The Knipex Cobras should be one of the first tools anyone in any profession should buy.

My shop all you will need is enough tools todo lubes for a year, if you make it that for, we teach you after a year you will need more tools, but you will not have to pay for them out of pocket.. we don’t buy them for you, you will learn during your training how this works.. great video been watching yours for a while now, looking forward to watching more

Very well thought out video, Ol Boy. So many things I wish I had purchased differently starting out. But it was tougher to do back when the option was tool truck or local hardware store. The increased quality of non truck brands has opened a plethora of opportunities. Glad you show that side of the industry as well. Kudos.

Great info. I'm not a pro turning wrenches but this info will greatly help the DIYer as myself when we get out there to work on our own vehicles. Thanks for all your great videos.

You gave great advice!After almost 30 years I’m struggling to remember more than one or two times that I actually had to have a thin wall chrome socket opposed to an impact. You will run into more cases of long sockets not having enough clearance on the inside for some long studs with nuts on them but it’s not specifically chrome vs. impact. Seems to be more related to the brand. My “pet” tools are sockets . I simply cannot buy enough sockets and I cannot tolerate a cheap one. Sockets to me are like ratchets to Clay. My socket addiction is out of control. I admit it.

@harveysmith100

4 жыл бұрын

There is help out there.

@I_Died_2_Weeks_Ago

3 жыл бұрын

@@harveysmith100 😂

@michaeldevaughn4267

3 жыл бұрын

No

That pretty much covers it aside from the diagnostic stuff. And I've found Carlyle to actually be great tools. It's awesome having the NAPA just down the road opposed to waiting on the truck to come around.

@cedricpidde9314

2 жыл бұрын

Carlyle tools are excellent

@gabrielfranco9786

Жыл бұрын

Carlyle tools are amazing so are Milwaukee. I’m looking into getting Milwaukee impact sockets because they have bigger kits for a good price.

Awesome job clay, I'm glad you put this out there. 💯🥇

Awesome video Clay. I have been an automotive tech for over 20 years and I agree with everything... You don't have to start out with the best buy what you can afford and work your way up to the best. I still have a lot of cheep stuff I use every day that I haven't upgraded cause I haven't needed to.

Great advice on not getting sucked in to only buying from the tool trucks! There are a lot of great options for buying tools. I started off my career as a mechanic with a used Snap-on toolbox I bought from a garage sale and a Craftsman toolset I got for my birthday. I slowly bought at first then got sucked into buying from Mac, Snap-on and Cornwell at the same time and nearly cleaning me out of my paycheck on a weekly basis!

I've been through multiple pick sets, and can say for sure .That snap on is the best investment for the young guys.

@WhuchakaV

3 жыл бұрын

I used to make the snap on picks in a 11 dollar a hour machine shop. Theyre nothing special.

@realrandom7666

3 жыл бұрын

@@WhuchakaV thats why you earned 11/hour

@xjlover2058

3 жыл бұрын

Have the snap on pick set and love it but a similar quality is gear wrench. I have had them for 3 years with no issue. Had mastercraft (Canada) and those broke off at the tips.

@joey9511

2 жыл бұрын

@@WhuchakaV most other picks are made in a .50 cent an hour sweat shop in China

This video was very helpful , just started buying my own tools to work in the diesel tractor harvester field , you helped me decide on my snap on slide top tool cart it’s great and I love it , I’m subscribed and looking forward to the next video , keep them coming !

@KoonTrucking

4 жыл бұрын

That’s awesome thanks for subscribing

Thank you for all your reviews it really helps us younger technicians get the tools we need! Awesome videos!

@KoonTrucking

4 жыл бұрын

You are very welcome! Thank you for watching and taking the time to comment ! I truly appreciate it!!

On the universal joints get pinned not the detent ball type, yes it's a pain to get apart, but when you've had a socket hit you in the nose you'll wish you had pinned. My solution is cut the flat blade off the tool truck freebie screwdriver they give out every year and keep it in your shirt pocket and use it to push the pin.

💯 on the 3/8 electric impact with air 1/2 impact. My electric 1/2 impacts are hella big and heavy.

KNOWLEDGEABLE Koo trucking Brilliant video thank you very much helpful video. Take care and have a great day Koo trucking From Nick Ayivor from London England UK 🇬🇧

Very good video. I started with Craftsman and kobalt ratchets. As I broke my Craftsman ones I replaced them with the Matco locking flex and straight ratchets and love them. And prices were good.

Loved your video Clay! Thank you for being kind and respectful for new people starting out in the industry

@KoonTrucking

4 жыл бұрын

Thank You !

@RideTheLite

4 жыл бұрын

I agree. His advice feels very genuine. I know there's others with the same mentality, but this is great.

I'm a current service member getting ready to transition to civilian life, looking at being a mechanic, your advice is really helpful. Thanks alot mr clay, say hello to mr bill (SOB) and mr Wally 1/2 a.. have a good week and cant wait to see yall on the best day of the week FRIDAY!!!!!!!

@KoonTrucking

4 жыл бұрын

Thanks for watching and I will tell them for ya !

Thanks for the video Clay. I have worn out a couple of Grey Pneumatic Duo sockets (10mm & 13mm) but my local distributor replaces them across the counter!

That is some outstanding advice. I just found your channel and you really do a great job. I have my proto 1/2 impact sockets for over 30 years and they still haven't let me down. I, too really like the Wera screwdrivers and nut drivers. They also have a good selection of pozidriv drivers and bits. I don't know about the heavy diesel world, but in automotive, many fasteners are pozidriv, not phillips. using a phillips on a pozidriv fastener increases your likelihood of stripping the head. I also like The Makita cordless tools and have had great luck with them, but I also go with my air tools in a pinch.

Great recommendations. Most people only need 2 or 3 good Phillips screwdrivers and any cheap flat heads will work. I use a universal on my 1/2 inch and never had the need for wobble sockets. My 3/8 set goes up to 22 & that little matco impact packs a punch

I watched this Twice. This is one of the best How To's or What You Need videos. Enjoyed watching. I think you need a phase 2 and phase 3. After beginner tools, what next. Expert tools -sky's the limit.

Great production on this video clay!

Okay, I love this setup and background. The video is very well done. Excellent lighting and the focus is awesome. I love this setup Clay. This is a TV show quality

@KoonTrucking

3 жыл бұрын

Thank you ! I appreciate it. It takes a ton of work and a pile of money and very few people ever even notice that. But since you did and took the time to leave a comment, I truly appreciate it.

Phenomenal video. Well broken down opinions, and advice. Thank you!

I have that flat hose pick set. I use the living crap out of it. I definitely recommend it. 👍

Man I am 2 years in the business and not doing diesel work but just gas, and alot of what you were talking was informative. I wish when I first started I knew more about that kind of stuff. Thanks for the video more stuff like this needs to be put out for us young guys. (Or Girls). Thanks man

@KoonTrucking

4 жыл бұрын

Thank you I appreciate you watching!!

The best and honest video Iv seen on U Tube Thank you

I bought a tub o towels to clean my tools because of you

@KoonTrucking

2 жыл бұрын

They work

Mr Koon back at it again ! 👍🏽

Great video y'all have a great day and stay safe 👍

DAMN THE NEW ROOM LOOKS GREAT!!!! I LOVE YOUR CHANNEL👍👍👍👍

@KoonTrucking

4 жыл бұрын

Thank you very much

If you are looking for a high quality heavy duty rollcart at an unbeatable price, Milwaukee makes a great product. I've had my 40 inch wide 30 inch deep 5 drawer for a little over a year now. Dry weight is 260 pounds. It cost me less than 400, and has soft close drawers and came with drawer mats and minimal assembly. Looked at several different brands couldn't find a better built box from anyone and if you want the top chest you'll be in if for less than $700.

You couldn't have described the knipex pliers any better. I always take them on road calls and they can make a job much easier.

Homak, Sunex, or Masterforce (from Menards) are real good alternatives for carts/boxes also.

I've had a set of williams metric reversible ratcheting wrenches for about 13 years now. They're the same as, I think the bluepoint or snapon ones, but I think they're one of the best values that folks don't know about...at least, they're the best rebranding value I've ever found.

I appreciate this video more than you might think, thank you thank you thank you.

Lot of good advice there! The less dept the better.

On some tools I don't use regular basis. SK is as good as Snap on Mac and Matco and Cornwall don't buy the Snap on vice grips if feel to spend the money find new old stock Peterson vice grips wich is the Irwin before they bought them out and channellock makes great pliers and cost effective when I started I bought a lot craftsman and slowly upgraded and I still have them as a back up set and gave a lot of great advice in this video

Couldn’t stress enough the point about impact vs chrome. I use my cheapo Harbor Freight impact sockets that my coworker gave me for free 99% of the time. My expensive chrome snap on sockets I spent a bunch of money on sit and collect dust.

Wow it's amazing the last guy in the comments section mentions ibuprofen & eyewash That mechanics keep in their toolbox that's me I kept a small emergency kit in my toolbox Band-Aids eyewash ibuprofen aspirin even though the shop had a eye washing system. When you doing mechanic work and get a small fragment in your eye you always want to quickly get it washed out course everybody knows if you have a headache or backache along with the first aid kit I also have personal hygiene in my toolbox a comb and brush cologne spray ect. When you sent out on a road call you wanted to smell fresh and good also I kept my extra toothbrush and toothpaste just a small itemized list of things a mechanic should keep on hand PS with that being said what a great answer retired diesel mechanic

@KoonTrucking

2 жыл бұрын

Many forget the simple things in life to make your day a little easier! Haha

Love the video. Where i live we only have a snap-on truck so what i did was i started off with blue point sets. And princess auto what is your harbor frate. I slowly got some specialty tools from them it looks like they are getting better in quality. So what i do is my cheaper tools go in my road truck for service calls and my shop is for my snap on tools.

Awesome video as always

Great video clay I absolutely love the studio it looks great man🔥🔥🔥

@KoonTrucking

4 жыл бұрын

I appreciate that it took a ton of work and a ton of money but I’m satisfied with it

Great video mr. Clay. Wild bill is the guru of diesel mechanics need a special apperance by wild bill.

Clay Your Definitely Letting Any Beginning Mechanic Know The Best Advise On Tools And The Nipix Or However It's Spelled Pliars Are Good And I Like The Irwin-Vise-Grip Brand Adjustable Pliars, Long And Short Handle And In Any Styles Of Locking Pliars From The Very Small Sets To Largest Size In Regular Or Platippus Or The Swivel-Pivoting Types Of The Original Vise Grip Brand Always Has Been And Still Is The Best Brand... Also A Good Heavy Built Set Of Wire Stripper Multi Tool Is Almost A Must In Any Shop As Well As Bits Of All Types And Good Drill Bits Along With A Couple Different Sizes Of Step Bits Get Used A Lot

Wonderful Video and Great Advice Clay! I like that you Spotlight a bunch of the off-brand tools you use. Gonna help me Save big time!

Been waiting for a vid like this!

I can't recommend the blue point flush cutters. Cutting a lot of zip ties working on macks and I have legit gone through about 11 of them in a year. I had to buy a spare one for whenever they broke I'll still have some. Now I use a combination of the Craftsman mini diagonal cutters from lowes/flush cuts from harbor freight and have been running that set for 2 months now and haven't had one break and I been using this combo for 2 months successfully.

@WhuchakaV

3 жыл бұрын

Get a pair of wire cutters that someone who draws wire uses... machined titanium. Amazing for 36 bucks but last forever

cornwell also has those hose removal pliers, there actually on special this month for 26 dollars.

Love the videos has helped me decide on several tools from pratt ks thanks

@KoonTrucking

4 жыл бұрын

Thanks for watching I appreciate it

I have been at it for over 40 years. I have had a lot of green trade school kids in the shops I have worked in. I tell those kids to concentrate on basics before they start buying shiny objects. I cannot stand a kid that has 2000$ worth of gear wrenches and burns up My drill bits. I get an attitude in a hurry when they pull that kind of crap. I have also learned that buying bigger sized wrenches and socket sets at Harbor Freight is actually wise. You will only use a few certain sizes on a regular basis. When those few sizes fail then replace them with a top quality tool.I buy Channel Lock pliers and genuine Vise Grip brand locking pliers. Nothing else will do.

Outstanding video I agree with this 100%

I love that duo socket set really sturdy ratchet sucks though

After spending a few hundred bucks on Knipex pliers, I about had a heart attack at the moment you picked up the Cobras while saying "don't waste your money..."

When I started, I bought a really cheap Craftsman roll cart. That was two months ago. My advice, buy a good one that's way too big first. I need more tools, but my cart is plumb full and I need a bigger one, after just two months.

Awesome video!! All your vids are great

@KoonTrucking

4 жыл бұрын

Thank you

Good video and good advice, Clay!!! Some I agree with, some I don't. But that's personal preference. Great video tho!!!!!

Very Good and Solid advice, The only thing I would add to that bout the pliers is not to overlook your local Electrical Supply stores or Industrial Supply stores for tools. they often also Carry Knipex. But usually always carry Klein and/or Greenlee pliers (which are actually are professional grade pliers. Klein in particularly is made in U.S.A. and is actually better than most pliers on the tool trucks) . . And Most Contractor supply stores are good about Klein, Knipex and Greenlee warranties too.

@mikewarpula911

Жыл бұрын

Klein by far had the best warranty I ever felt with.bought an old set of Klein line man pliers used them a while and the handle broke,I called Klein to see what a new pair would cost.said they were under warranty. Told them I bought them at a sale,didn't matter sent me a new pair and even paid the shipping.been Klein plier man ever since. Snap on could learn from them.

Noco jump jack is another good thing to add

@danieltubbs458

4 жыл бұрын

You should do a video kinda like this one but what scanners to start out with

@danieltubbs458

4 жыл бұрын

And you kind of touched on it but going with OEM brands like Irvin or OTC or OEM when it comes to tools because so much of that shit is rebranded

Grey Pneumatic Duo sockets are the best. Just wish they sold them with Sockets only.

Been running the grey pneumatics for 7 years thinking they will break but they just won’t, I started with all air tools other then an impact driver and drill, I now have all the air and electric tools, it’s just handy to run air if you’re all over the shop, but I’d recommend a 3/8” impact and 3/8” cordless ratchet to start with electric.

I bought the cheaper roll cart and I definitely agree the slide open snap on is a better choice. Others make this style so shop around.

For air tools I like Ingersol Rand for impacts, Mac air die grinders, Matco for a air drill and air ratchets.

Good shows, all of them. They got to get a Wally.

Starting out in the diesel field, as a shop tech...buy the cheapest tools you can. As those tools break, buy the best tool that broke you can find. Cheap 19 mm deep well socket broke? Buy the Snap On/SN/Nepro/MatCo/Mac equivalent. The only tools you need to buy quality when starting out...if you can afford it...is wrenches and sockets. Basically any tool that actually touches the equipment you are working on. Ratchets do not touch the equipment, sockets do. It will save you skin. Good luck ya'll.

To add for anyone that doesn’t know, dewalt and MAC share batteries and are usually sold on the same truck

I like Snap On and Matco ratchets. The snap on long and yoke style ratchets. The Matco bent ratchet is my spark plug ratchet.

Solid Point I go on the Snap-on truck an buy other tool brands lol An I dominantly own snap on tools Honestly snap on rachets are way over priced good rachet but I wouldn't buy them again lol....

I've seen some experienced mechanics carry ibuprofen and a small eye wash kit

@austinwilson8929

3 жыл бұрын

I work in a scrap yard on sennebogen cranes and semi trucks and I keep eye wash, Tylenol 650mg, and bandades in my box, you never know when you need a bitch sticker after smashing your hands or if you smack your noodle on a brake chamber under a roll off trailer.

100% agree about having that long 1/2 flex-head ratchet. Bolts that you'll never break loose with a regular ratchet will come off with those beautifully. I've gone the cheap route for about 7 years with a Kobalt one that's 24", sold at Lowe's -- it's never broken but the threads that hold the flex-head screw have loosened up (maybe due to high torque?) twice, and I've exchanged it twice, so I'm on my third one. BUT just ordered the Snap-On 25" one (Part No. SHLF80A) after strongly considering the GearWrench (Part No. 81372T). . . . If I had to disagree on one thing, it's that you shouldn't have 1/4, 3/8, and 1/2 sets but ALSO 3/4. (The Kobalt ratchet is Lowe's Item No. 337328.) I have NOT used Knipex pliers but have used 2 dozen other brands and found that Napa's CARLYLE pliers have INCREDIBLE grip. . . . Gonna have to check Knipex! Thanks for this.

Ive found that chrome sockets are notorious for flattening hog rings on impacts. They either stay on an anvil so well you have to pry them off or dont seat well

fantastic video!!

@KoonTrucking

3 жыл бұрын

Thank you

If mechanics don't workout I really think you have a future in: - symphony conductor - flight attendant giving the instructions before takeoff - the guy with the flash lights directing a plane.

@KoonTrucking

2 жыл бұрын

Well I certainly appreciate your insight on me talking with my hands

@daniellewis9240

2 жыл бұрын

I actually forgot to mention sign language interpreter😃 PS:this is literally one of my favorite KZread channels!!

The issue with using impact sockets for tightening/putting bolts on is rounding. The sockets are made to flex and therefore round the corners of the bolts. Those Grey Pneumatic ones may be okay though. I am very interested in those.

@KoonTrucking

4 жыл бұрын

I haven’t had any issues with impact sockets at all damaging bolts or nuts?

Stream Light Is A Great Light That Will Last A Long Time If Treated Right And I Mainly Use The Bushnell Brand Tactical And Their Other Models That Are High Intensity, High Lumens Led Lights In Many Different Colors And Styles And Any Of Them From A Single Triple A Battery Model Up Through The Various Rechargable Models, You Can Buy A Lot Of Bushnell Lights At Walmart And Their Quite Affordable From $20 Up To $250 Or So But I'm Into The Flashlight Hobby Of Collecting Them And Bushnell Is One Of My Preferences And I Have At Least 45 And I'm Sure It's More Different Bushnell Models And A Lot Of Other Brands Also

In regard to the impacts even tho the millwakee is cheepest all they do is make power tools they know what they are doing. In my opinion they are the best I've only had half inch snap on but a coworker has the millwakee equivalent and after borrowing I massively regret buying the snap on and alot of people I spoke to agree

Gearwrench Model #83001, 1/4 in. and 3/8 in. Drive 6-Point Standard & Deep SAE/Metric 90-Tooth Ratchet and Socket Mechanics Tool Set (106-Piece) $154 at Home Depot. All the 1/2" impact sockets are about $20 per rail at Harbor Freight. Skip the budget cordless brands, and go with the Milwaukee battery system right from the start. That's how I'm getting my boys started...

For a cheaper 3/8 cordless impact, check out the kobalt. I bought one used off a coworker and have been super impressed. Can just about keep up with the 3/8 Milwaukee that the other guys in the shop have. Battery lasts forever too.

@KoonTrucking

3 жыл бұрын

I’ve got the Kobalt and it is a beast it out performed the Milwaukee and Snap On kzread.info/dash/bejne/i2F50ap_eMLIlrg.html

Astro sells the volt meter test lights also

I think it shows you put a lot of thought in this video agree with most of your tools but not for nothing Snap-on chrome 3/8 sockets are strong enough for eletric tool not safe but they work...

Use of chrome sockets on an impact can do damage to the impact and ruin the anvil.Do have to watch where you buy Grey Pnuematic,they void the warranty buying them from unauthorized dealers such as Amazon and Ebay.Look in the second hand market too,there maybe a retired mechanic selling their tools off.Pawn shops as well.Some of my tools,I bought used with no complaints.Milwaukee's warranty,void on the tool if an aftermarket battery is used.I still have my first hammer I bought from Tractor Supply,a Pro Grade brand and has held up great.Problem with the rolac and scotchbrite pads is they take off too much material at a fast rate damaging the gasket surface.

Also Klein makes the best flushcuts

@shramj

3 жыл бұрын

Thanks for the tip, they are inexpensive and also made in USA!

I went with an IR 231 c for an impact. Get some ear pro when you order it. Mine gets pretty obnoxious the closer I get to the compressor room. Plus side it likes to be over pressured and $20 gets you a rebuild kit for it 🤷‍♂️

Good video

I have been using ryobi battery tools for several years and actually do well

My experience with the 1/2” flex head from ICON was great at first, then I started using it as my go to 1/2” incher (over my slf80a) snap-on…two broken pawls in a row, and I know it’s not designed for a snipe to be put on the end of her but who doesn’t do that? If I didn’t use it heavily, it would do everything you’d ask. Using it on the daily for more than a month, you can tell the internals have shit broken off. I’m a fan of what works.