Matt, as a school Principal for 20 years, I would have hired you in a heart beat to teach in my building,,,I am an old man,,,,but I recognize a good person and a good teacher,,,,Thanks for your presentations, You are smart and are a kind person to all people,,,,The world needs more Matts in the world...Thanks,

Your words of advice on “Don’t buy into the myth” holds true across all types of collector cars and especially performance cars. In the Classic Cougar and Mustang world, there’s always some dumbass trying to tell you/ sell you that his car has a ‘Boss 302’ when it’s a run-of-the-mill 302. It’s also so easy to buy scoops, spoilers and decals to make your standard coupe into some hot model. A running joke in the Camaro world is how there are more SS’s today than Chevy originally built back in the day! But most scammers are too lazy to go the extra mile. For instance, real Cougar Eliminators have staggered rear shocks - nobody goes that extra mile when making a clone. Knowledge is Power! Thanks for educating folks in the flathead neck of the woods, Matt! Btw, I have no problem with clones and tribute cars, just as long as the owner is honest about it.

@AndyGeesGarage

3 жыл бұрын

Haha! Yep I had some mook argue with me that the finned aluminum valve covers on his basic 302 made it a Boss 🤦‍♂️

@joegarage6132

3 жыл бұрын

Ok, I'll date myself, in high school in the 70's, you could buy any SS, hood, trim to make a stock camaro anything you wanted, with GM parts. We all had z28's , ss and what ever with a 327, 307 motors. I laugh at the price of those cars because we beat them up, doing the cop move in reverse then flipping around was my a buddies best move in his z28 327 auto..lol always let the buyer beware

@dalemarshall4878

3 жыл бұрын

Or how every SBC is out of a Corvette. I imagine a junkyard full of engineless Vettes somewhere. 😏

@joegarage6132

3 жыл бұрын

@@dalemarshall4878 Funny you should say that, In 72 when I bought a 56 2door post the guy told me that the 327 was our of a corvette, so they have been doing that for a long time. It ran good, $400 running missing a hood, door window, front bumper, a little bit of fender damage, those were the days.

@kristofftaylovoski60

3 жыл бұрын

I suspect this is why those hated and maligned "ma and pa" "4 door with the post" shoe box Chevys with honest 283's are getting to be so damn respectable and unapproachable. All the two door stuff has been turded over so severely.

As someone who finds flatheads very appealing yet is rather clueless about them, I find this very helpful!

As a machine shop owner I totally agree with you Matt!! Thanks for pointing out out the cracked oil pan rails, typically easy to fix but often overlooked. The only thing I would add is if the main caps are missing(on any core block) walk away! That is just another costly repair. I would also recommend that people carry a caliper with them to check bore size to make sure it hasn't already been bored several times, because 8 sleeves & installation is also spendy.

@IronTrapGarage

3 жыл бұрын

Great tips Andrew! I knew I’d forget some stuff!

I had the pleasure of meeting Andy Granatelli at Bonneville... {1999 or 2000?} I told him I had a set of Grancor heads and tri-carb but I questioned the originality because of poor quality but he assured me that they were more than likely original because of the lack of speed parts in the Midwest that they made molds from other aftermarket parts with their own modifications to sell under the Grancor name! He shared with me that "They weren't the best quality but they were available and worked good at a reasonable cost" and that They had issues with porous castings and that they got pretty thin if you polished them up! I did sell them for a lot of money to a builder in Wisconsin and replaced those parts with better quality Offenhauser parts!

Excellent job Matt. Thanks fer takin' us along...

This may just be one of my favorite videos. Thank you Matt. A+. 👍

Good start on what sounds like a great series coming.

Great information and hot rod history. Thanks for posting!

I share your fondness for the Ford Flathead. Thank You for doing a video on them.

Love that knowledge, thanks Matt for the video

Good job Matt. Hit the nail on the head. This series is exactly what is needed to get us newbies, read me, going. Thanks in advance for all your doing and going to do for this hobby. Wayno

Hey Matt: Even tho you just brushed the surface ,there was a lot of good information for us to take in.Looking forward to the next video.

Wow Matt just always the best content. Thanks for keeping me motivated. 👍🏼

You're a great communicator, Matt! I like your realism and good humor. Carry on, sir.

Perhaps your best video to date. Thanks for helping out budding flathead-philes. You are expanding the hobby.

Great video, lot of interesting info. Look forward to this series.

Great tutorial on the basics. A good review for some of us and a good intro for others. Thanks!

Kudos for this. That was a lot of great info jammed into 28 minutes, not an easy task.

This series is a super idea!!

That was an amazing intro’ to flatheads Matt. You had my attention from beginning to end. Look forward to seeing & hearing more. Regards from the U.K. 🇬🇧

I bought the Nostalgia book by Ron Holleran a few years ago and you can really easily get overwhelmed with all if the information, old crazy secrets, and 'folklore' surrounding these engines. Thanks for the video Matt!

Thanks Matt, one of your best videos to help us out when trying to figure out what flat-head engine to purchase

This is a great video and will be a great series. Like I told you the other day, your wealth of knowledge is of great interest to those of us who are just getting into these traditional hot rods. I may be old in years but am just a kid in flathead knowledge. The tip about pricing a flathead based on the parts attached to it is a great idea and one I never thought of. Makes sense. Thanks for this one (watched it twice already) and looking forward to future similar videos.

Great video - and very timely! I bought a running flathead for my 1931 Model A Roadster. I hope to have this project done this summer. Thanks for all the information in this video - It helped me in knowing what to look for before I bough this engine.

Fantastic video! Thanks for taking the time to make and share it.

Nice overview, Matt. Great job de-bunking the myth of “flathead gold” that you always hear when buying these things

Very well done love it I'm 53 years old was raised by an old hot rodder and you did a fantastic job

This was a premium information video. Great job.

Great video Matt. I learned a lot!!!! Thanks for sharing.

I'm in the process of rebuilding my Dad's '39 Ford Deluxe Fordor. Running when parked in the late 60's early 70's and kept intact and mostly under cover since. This is very helpful. I liked the 1939 Forgotten Hot Rod series too. Thank you!

I learned alot. Thanks for sharing. Great job!

Thats great knowledge matt. Very cool 👍

Another great video Matt!

Thanks Matt! Great series idea, enjoyed flathead facts!!

Wow this video came just about right in time. I’m off to pick up my first flathead V8 tomorrow. And yes it is a complete running engine. It will be fitted in my first hot rod, a T-bodied model A. I have watched your videos ever since you started the coupe build at the Eastwood Chanel and you are an big inspiration! Thanks from sweden.

I am in love with the lady car from Michigan and you're customizing it back to traditional way. Thanks for your time and help with this video!

Such a great video! I also cant get over how photogenic this garage is. Literally every wall is a work of art.

@IronTrapGarage

3 жыл бұрын

Thank you!!

Great video and lot's of good information to get started. Cheers

That was the best overview on flathead I have ever seen. In 1957 (I was 16 ) I bought a 1936 3 window cope for $25 and put a dual manifold with chrome carbs on it. It may have been a Weiland manifold. The carbs were not the desired Stromberg-s. The generator was in front of them. Not the better arrangement with the generator offset. It was not fast but sounded great when you floored it. My next car was a 1951 Ford convertible , white, contenentail kit, balanced engine, pressure plate and water pumps with a spotlight. It cost $320 in 1955 at the Miami, Florida dealers auction. For a while I had a 59AB engine, 3 3/8 x 4 1/4 (304 c.i. ? ). It was full race specs with a Zephyr geared 1939 floor shift trannie. I got my hands on a McCollugh supercharger for it but was missing the crankshaft pulley, it cost $50 and I got the engine for a 1954 ohv Ford v8 that I paid $25 for. I lost all that stuff when I joined the Army My next car was a 1953 Olds coup with a stick shift ( pretty rare )..I traded it for a project car, a 1953 Ford cope with a 1955 Chrysler 331 ci Hemi adapted to the Ford 3 speed trans. It was wicked fast and I have a million stories of racing it in Miami in 1960. Seven years later I had a 427, 1964 Galaxie that I don't remember racing at all.

Love your knowledge mate. The thing that always interested me in flathead was the aftermarket/speed equipment industry that popped up. Around heads or after market ohv conversion manifolds etc. Would love to see an episode on that. Surely im not the only one. Cheers

Great craftsmanship a great looking T nailed the proportions! Lovely job matt

Also I found My matching 1933 Pennsylvania plates! Just found them while I was listening and watching the video, while I was in the garage cleaning up some.

Another good basic primer. Thanks!

Thank you for sharing your incredible knowledge and perspective.

loved the video. I have a 1950 f1. i'm not much of a mechanic, but I did learn a lot of stuff in the last 28.29 minutes.

Answered my own question i asked on your last video by watching the flathead video 😂. Thank you Matt

Wow Thanks Man !!! That was AWESOME ...

Important series TY! I think the Blackie Car is over the top RAD! Have fun Matt! ...Newk from Kentucky

Thanks for sharing a friend from Canada Rob ✌

Really great video with outstanding information. I'm looking at putting a flathead with '39 trans into my model A coupe for a build I will be starting soon and this is very timely info. Thanks !

Wow so much information. Thanks

Excellent Video Matt very informative

Hey Matt very informative video on the flat head engines. 👍

Good video Matt, very informative!

Yes, it had something to do with what you talked about in buying used heads. I thought I could use more compression. Sometimes too much is too much. Expensive lesson.

Great video, now you're breaking some sellers hearts haha

This was great. I learned a lot, very informative, but so glad there wasn’t a test at the end.

Great job and Another great video 👍👍🇨🇱

I collected flathead speed equipment in Miami in around 1958. You could get a dual carb or a 4 barrel manifold for $25 including the carb or carbs. Used aluminum heads were $25 too, but they were always eroded inside even then. For $20 I got a column shift Lasalle trance with an adaptor to mount on an ohv Ford V8. I only put one of the manifolds to use but I took them to Tennessee in my trunk to show off on my summer vacation.

Thank you for the interesting and informative article ! Take care , stay safe and healthy with whatever you maybe doing next ! Doing well here in Kansas .

Good lecture, professor Matt

Back in the day my dad had flathead powered rods, always preferred 49, or early 50 Merc engines . Said they were the best !

Excellent video and information 👍👍

very good concept thx

Thank you Matt very informative. I have 4 flatheads, an always looking for more. Stay safe regards to Kate an the kids, an Mike. Terry

I love no bullshite explanations of old school crap that is crap and caring less about the myths. Good honest opinions you put forth for those who weren't even a twinkle in their grandparents eyes yet. Enjoyed.

Have a great thanks for sharing a friend from Canada Rob 🇨🇦

Thanks Matt helps a lot

Thank you, good stuff.

Looking forward to this series. Already off to a great start with a wealth of knowledge. I’ve been watching for a while now and haven’t seen much interest in four bangers. Did you ever have a hankering for them? Nice job as always 🤘🏻

I ran into the buying a flathead dilemma when the flatty in my 40 spun a bearing with the associated carnage on the freeway. Still ran though just very rough & noisy. The motor was not really rebuildable, shopped around found a lot of those ran great when pulled stories and ... cracks!...I don't think so comments. Ended up getting a short block built for me from H&H Flatheads. Easy no worries got the engine added a full flow oil system and ccv system bolted my old parts on and I was on my way! Zero problems!

Good work on expose of the issues one might run into with flatheads.

Thanks for the great info. & your personal experience with buying and what to look for. I just got a '53 8BA from a customline. Exactly like you said, wanted to update the drive train. I actually traded a 350HO crate eng. I had that has approx. 5K mi. I really like the Flatty look etc. I'm a Chevy guy & it's actually going into a '52 GMC p/u! I will check out your other videos and thanks again!

Your videos are great on informing and helping on getting into hotrodding, thanks man! 👍 Perhaps you can make a video on inline flatheads like 6,and especially 8s! in which I like to do for my 37 hudson. I'm always looking for ideas and thoughts from the hotrodding community.

Hi Matt and Mike good info video 👍🇬🇧

Shout out to Edsel Ford... If it wasn't for him standing up to the old man there would have been no flathead or the iconic styling of the V8 Ford's! Matt's video would have been: Let's see if we can get 30 hp out of this 4 banger!!!

@hopingforthebest1.9

3 жыл бұрын

Apparently they tried to originally make an x8 engine, that would be interesting

Good video Matt! I'm a 4-banger guy but those V8s sure look good.

Love the flat heads

The Free-T's flathead is one of the most beautiful engines I've seen. There's something about the looks of a flathead that you can't get from any other engine.

@IronTrapGarage

3 жыл бұрын

Flatheads look perfect was dressed up!!

@jamessheets9205

3 жыл бұрын

One word HEMI. :D

I am a real old hotrodder almost 76 now. Flatheads hold a special place in my heart. My Dad owned a Wrecking yard/Garage as we called them out west and then sold that and had a 2 bay garage/service station. I worked and learned from him from 14 years old till I left for the service at 19. Flatheads are where I first started as they were everywhere and cheap. They are like your first girl friend, ya never forget them. I started just mildly hot-rodding them to going as far as a kid (17) could do at the time (my last Flathead) a 286 cu in, Isky cam, Eldelbrock Heads, Mag spark ign. Dual Carbs etc, the usual stuff then, put in a 49 Ford Coupe....I miss those early days. The advice you gave here is very good stuff especially today with the rareness of the flatties. It not like in my day where you could go into any junk yard and sort through dozen of them till you found a good one for $25.

@killroywashere1254

3 жыл бұрын

I am one of those old hotrodder. 80 years old!! Ever hear of a TEMPLE FLAT HEAD??

@radtek2

3 жыл бұрын

@@killroywashere1254 I have heard of a Noel Temple read about him somewhere and that he built some really fast flatheads in his day. Back when I was doing flatheads it was around 1961 to 63 and only knew the local guys here in Tacoma WA.

Fantastic session Matt - thanks a ton. You’ve dispelled some of the myths and confusion I’ve been trying to wade through. Thinking of a flathead swap in my ‘49 Willys CJ3a...... Sounds nuts but if you think about it...a dirt simple platform, no doors or a roof, leaf springs front and back, came with a flathead four-banger....the thing is 90 percent hot rod already. 😜 Just need an overdrive and a vintage motor that can get out of its own way. Seems to me shoe-horning in a little Ford from the same era with some speed goodies bolted on top would be tons of fun in a light little tin can like the Willys. 😎

@IronTrapGarage

2 жыл бұрын

That sounds like a hoot to drive; we approve! Thanks for watching!

Great info, and nice to see a younger guy dedicated to flatheads. I'm looking for a 1947 pickup and these are so different I don't know what I don't know--passion without knowledge is dangerous. I've also discovered someone knowledgeable an easy day trip away. Back in the last price mania I met a guy at Carlisle who asked how to tell a real LT1 Corvette. I rattled off a list of dead giveaways, and he moaned that he just paid cash for one, the guy left, and he's sure it's not a real one. Thanks for educating!

@IronTrapGarage

3 жыл бұрын

Happy to help. Thanks for watching!

Great info! Also there are some repro speed parts on the used market as well so not worth the same collector value. Bought an 8BA Eddie Meyer high rise with 2 Holleys. Looks killer but sure wish it was an original! Helps to know what has been repopped if “vintage” parts are baked into the sale or if a part was ever period-made for later engines, etc.

Cool - this is so helpful. I'm thinking about buying a 32 truck. Its making me re-think the price as I don't really know much about the non-working engine. Thanks!

Thanks Matt

Good information 👍

That Pete Henderson roadster is spot on perfect. I had no idea it was in eastern PA.

Cool vid Matt !!!!!!!!!! 👍👍👍

Awesome tips

Great idea for a series! Any chance of one on the old big inline sixes that were ran in the 40s and 50s? The big GMCs and the like.

OMG great video 🙂

Good advice!

289B,s 24 studs, 49 Merc is the most possible 59 stamp, yes. had a wonderful time in the 60's.

Great video. I just got a 8cm motor that was built by Dyno Don Chamberlain. 276ci that put out 275hp on the dyno. I’m in the process of a 40s X-Member and juice brakes. There’s some videos of my roadster on my channel.

Matt, a real good start to a successful series. I'm certain that other people here wouldn't mind you "rambling", information is coming out of your mouth not nonsense. You're rambling would feel more like a club gathering. Think about that..

I'm not a Flat head guy My Dad talked me out building one years ago " you'll spend a ton of money to make mabe 200 horsepower " He knew my need for speed .

Picked up my C59A flathead for CAN$100. It was in pieces, and I had no clue about how difficult it was to find one that was not a boat anchor. My machinist warned me about the cost to rebuild. I did a budget short block, and supplied most of parts. Still cost about CAN$3K for machine work. Long live the flathead!

Great info Matt. You mention the water pump positions but not why. Knowing this is not a tell all on these engines. I might add that an issue, especially out west was the pump locations tended to create a low pressure inside the block and heads Ford being from the Midwest was more concerned with getting heat into not out of the engine. Overheating was always an issue. Moving the pumps to the bottom (50-53?) reduced but never totally solved this. All because Ford adapted the model A four cylinder design hense the split cooling system and exhaust routing. This might be of use to someone looking to drive distances out west.

@IronTrapGarage

3 жыл бұрын

Great info thanks for sharing!

Thank you for your information on the flat head engine this is really helpful to me I always wondering how to check one out I love the look and sound of the flaty sounds so cool but I know I'll never have one but I always wonted one anyway thanks again for your help really awesome video