A very minor recommendation for DDR5 builders is that I wouldn't enable xmp UNTIL Windows is properly installed. It isn't a big issue with DDR4 but I've seen some instability with DDR5 even if the kit is rated at that speed on their website. It can be even more finicky if you're populating all 4 dim slots on your board. It is technically still an "overclock" at the end of the day and you'd want to remove any potential reasons that could cause hiccups during the installation process.

@BigDavos

Жыл бұрын

Good tips just seen this on another channel

@michaelpearson9

Жыл бұрын

Nope not for me if i can't run xmp during windows installation means it ant gunna work properly then ull have to dial down speeds to see where its stable

@michaelpearson9

Жыл бұрын

If u cannot install Windows with xmp enabled u have a issue with ur ram and i would rather know during the installation process then getting into Windows and its lockes up while doijg stuff trust me ive been there ive had corrupted data from a pc locking up while moving data it ant pretty ive lost it all

@vive335

11 ай бұрын

@@michaelpearson9wut

@atl126

10 ай бұрын

100% agree with this.

Being a first time builder of a gaming/streaming/video editing pc this was incredibly useful! 🎉 I have to slow it down a bit to keep up but this was incredibly helpful. Much love my friend and keep up the great videos. ❤

@DefinitelyAreo

9 ай бұрын

What's your specifications?

Note, don't use 4x8gb, use 2x 16gb for ram

@WaterSpree262

Жыл бұрын

That is so true

@michaelpearson9

Жыл бұрын

Nah 2x 32gb

@tabs1206

Жыл бұрын

I use 2x 8gb is that good or bad? 😬

@NosyNorseman

Жыл бұрын

Why not 4x8 ?

@gejamugamlatsoomanam7716

Жыл бұрын

@@NosyNorseman xmp profiles will have issues you might not be able to set ram speed to its rated and would need to set it lower

Your videos have been instrumental in me configuring my new pc. Thank you! It'll be time to buy everything soon. Prices are getting lower every day!

ah finally, a good video for what to do after getting a new pc, just the put the cable on the gpu i never heard it before and on my there's protection on it so i couldn't see it. Thanks for this video!

just finished up my 1st PC build last night. Your videos were a huge part of every aspect of my build. Great job, keep it up bud!!

@Michael12689

10 ай бұрын

How did you get windows 11 did you use another windows computer or did you do it a different cause I can’t build my first pc cause I don’t have another windows computer to download windows 11 on

@lovecramperdrumpinthejoker5237

10 ай бұрын

​​@@Michael12689sing usb flash and install from other PC or laptop and plugged in to download the drive

@gian.zagada702

10 ай бұрын

@@Michael12689 do you not have any access to any computers at all? Like maybe a friend? Parents? Or if you have a library near you.. just get a flash drive and install the Windows OS and you should be good to go. I’ve never seen anyone do it with a mobile device so I’m not really sure

@sangle6550

10 ай бұрын

@@gian.zagada702so do i need to buy license key after install window ?

@jibzzz1

9 ай бұрын

How is it going

just finnished building my desktop. thanks for the nice video.

I literally finished my build tonight. I just need my MnK and windows usb drive and I’m ready to start👍🏼 perfectly timed vid

@solomon464

4 ай бұрын

Hi, I downloaded windows 11 newly onto a usb and my existing pc that I used before doesn’t work anymore and says I’m not signed in, do you have any idea on what happened?

@cooldaddyslick6869

3 ай бұрын

​@@solomon464You can only use the key on 1 computer at a time.

Thank you for that graphics card HDMI port tip. I was really worried for a bit lol.

Best boot video I've seen. Currently building a computer so Ill revisit this video in time. Thanks!

@russellbeary_

Ай бұрын

I want to build a PC for my first time sometime soon, and I thought I might as well go over some videos beforehand so I have an idea of what to expect. This guy is great at helping

Thank you so much, got it all set up today and you really helped me product my pc well subscribing and sharing this video! 🎉 :)

Exactly the video I was looking for, thanks

Thank you so much for explaining the window. I was so confuse about why my pc not working

thank you I'm building my first pc and this is so helpful and clear🙏🙏🙏

thanks for vid, starting my first built sunday

Great vid, very informative. Most people don't think about this part after buying/building a pc lol

@romaneabdul5762

Ай бұрын

im confused on the hard drive like do u need a laptop or can you use the pc you built

Great video helped me a lot i really apricated the programs to check how the computer is doing

I fucken love this guy. subscribed! Finally, a no horseshit tutorial and straight to the point. Appreciate you sharing the secrets by the way!

Thank you , you help me a lot. Please, more videos on new hardware

This helped a lot, thanks!!

Thanks man it helped a lot!!

Ive gotten all kinds of advice on how to install Windows 11 on my new gaming PC from programers and network engineers but this was simple and streight forward from the first turn on to system monitoring. You cleared up a lot of my questions

@smwfreak1647

10 ай бұрын

windows 10 better ngl.

@solomon464

4 ай бұрын

Hi, I downloaded windows 11 newly onto a usb and my existing pc that I used before doesn’t work anymore and says I’m not signed in, do you have any idea on what happened?

@yipyiphooray339

3 ай бұрын

pray to wakanda@@solomon464

Very detailed and helpful thanks

This video helped me a lot, thank you

Good stuff dude. Easy to follow video, no bullshit. Following!

I don't have a full pc setup yet, but this video really helped me for when I actually get a full setup

@TheUcHiHaMaD

8 күн бұрын

Same

Great video, also i'd recommend two more things, one is going into the windows update settings and checking to see if there are any important security/ feature updates you need, and the other is uninstalling any bloatware apps you don't need like solitaire or onedrive

@Vaprium

5 ай бұрын

Isnt onedrive pretty useful?

@solomon464

4 ай бұрын

Hi, I downloaded windows 11 newly onto a usb and my existing pc that I used before doesn’t work anymore and says I’m not signed in, do you have any idea on what happened?

Thanks for the video! I've seen videos on updating Bios BEFORE install OS. 1) Is there an advantage to either updating Bios before or after installing the OS? You recommend Enabling the XMP for the RAM, and installing the OS, before updating the Bios? Thanks! 2) (I'm also installing DDR5, and my Bios will not Enable XMP yet. I'm figuring the bios flash is needed. (Also, the below post advises putting in Windows BEFORE enabling XMP on RAM. I'd like your thoughts. Thanks!)

Just built my first PC last night and I thought everything was setup correctly but there was no display, the pc turned on and the fans were spinning, RGB ram was lit up but the only thing I didint do was connect the mouse and key board as I didint think I’d need to press delete button a bunch of times, gonna try later tonight and hopefully that’s all it needs 😅 if so your a life saver as I’ve watched many other videos on why it won’t display and nobody mentioned you might have to press delete button a bunch of times.

@zandersview516

8 ай бұрын

How did it go!

@Ferzhq

6 ай бұрын

How did you fix it, I got the same issue

@TwoSmoker420

6 ай бұрын

@@Ferzhq I had to loosen the graphics card screws as it was hanging too low to plug the HDMI cable in, the cable wasn’t sitting in all the way

Thx really helpful

This is very helpful

Such a Nice video thanks

one other thing to mention is to uncap the refresh rate in the settings if your moniter is above 60 hertz

Great job mate.

OMG!!! THANK YOU!!!!! 🙏🙏🙏🙏

Thank you so much! Was overthinkn everything😂😂

Good stuff. Had to bypass the internet set up to update lan drivers so it would connect finally

@rickyazz529

3 ай бұрын

How did you by pass the internet part when installing windows , I’m stuck here I think I will have to download them on another pc to a usb

Gonna power up my build for the first time. Very helpful information and will come in handy.

simple, PERFECT.

Appreciate it 🎉❤

Never enable full speed of the ram until you update the bios you always want a stable bios running until everything is up to date to avoid crashing

@wisemanoncesaid5127

Жыл бұрын

Even with ddr4 ?

@yukhzia

Жыл бұрын

@@wisemanoncesaid5127 yes i’d recommend you enable full ram speed after you’ve finished installation of drivers and bios for the motherboard

@michaelpearson9

Жыл бұрын

If u can't install Windows while xmp is enabled then u have a issue I've done plenty and all fine

@FLAMEalan

8 ай бұрын

Made this mistake today 😅

@tonydowney1152

5 ай бұрын

​@@yukhziawould i need to reset and reinstall windows again if I did this mistake? My game keeps crashing even with cpu and gpu temps down. My ram isnt faulty and I run a dual monitor set up 😢

thanks so much me and my dad built a pc and we didint have a clue what to do next thanks

Great video, but I personally had the problem that turning on the XMP profile for the ram before even installing windows completely messed up the bios and it started to freeze and windows installation went into a direct blue screen, also changing back didn't save. Resetting the bios and leaving the ram on lower MHz for now fixed the problem. Found this to be the reason since several people on the Internet experienced that before.

@alexya818

5 ай бұрын

THANK YOU. MY GOD THANK YOU. My windows 11 installation kept crashing again, and again, and again, and I couldn't find the damn reason why. Did what you said and it worked. FInally, THANK YOU

@-Sangral-

5 ай бұрын

@@alexya818 Great to hear. Glad this could help.

@alexya818

5 ай бұрын

@@-Sangral- did you manage to turn on the XMP in the end? Cause when I do it now Windows won't boot. I'll try updating the BIOS, but I'm afraid it won't fix it

@-Sangral-

5 ай бұрын

@@alexya818 Yes I did, XMP on and there is a selection somewhere for the DRAM frequency I set that to auto and this worked. Does windows start without the XMP settings?

@alexya818

5 ай бұрын

@@-Sangral- yeap and the benchmarks shows no problems at all, it does says the RAMs aren't performing at their best ofc

Thanks for all the help I was planning to build a pc myself based on one of your past videos and you have been really helpful especially since it’s my first time.

@Yerocco

Жыл бұрын

I just built one. Doing windows and stuff now. It’s really not that hard!

@lovecramperdrumpinthejoker5237

10 ай бұрын

​@@Yeroccoi need to ask for first timer here , does i need to install driver for my gpu ( mine is asus tuf 3080 ) and how/where to download/upload my gpu driver?

@Yerocco

10 ай бұрын

@@lovecramperdrumpinthejoker5237 you’ll just go to your manufacturer’s website for your processor, gpu, and motherboard. The downloads are under support. You’ll download them, install them, restart your pc, and that’s pretty much it after you’ve assembled your pc. If you get stuck, reach out. My knowledge is limited but I built mine on my own so I know a little lol.

@Yerocco

10 ай бұрын

@@lovecramperdrumpinthejoker5237 btw, that’s a serious gpu lol. I was blown away with the 6700xt performance for half the price.

Everyone makes it look ljke rocketscience bht he makes it soo simple tysm my friend u hage well earned a sub and like

Gonna come back to this video next week when my Pc arrives

I have to set up mine I hope it goes this smooth

very good video !!! 🎉

Thank you Magic Man

Great content, definitely could have used this before my build, great information 🪛

I live this guys vids and I don't mind the zed instead of z, but the "haych" instead of H kills me lol😂😂

you can actually use a usb 2 thumb drive as well doesn't have to be usb 3

Great timing for this video. My build will start when I get the Ryzen 7700x in this week. Question: I purchased the Peerless Assassin RGB cooler for my Ryzen 7700x. I also purchased 2 addition case fans, also Thermalright RGB. Can I daisy chain the 2 additional case fans with the CPU fans, and use the single CPU fan plug on the motherboard (ASUS B650E-F), or should I connect the 2 case fans to their own fan port? Thanks for a great video.

@Anarhistful

Жыл бұрын

you absolutely can daisy chain into a single cpu fan plug, you just won't be able to control each of the fan speed individually (if for some reason u want to)

I just watch it not for the know how but to give a Like and comment. Lil bit of me wanting to know how it is with Windows 11

If you are moving your SSD from your old desktop to your new gaming system, do you need to reinstall Windows or it should detect the new hardware?

i have been watching these videos for a while now but i was wondering is it better to build or buy a pc?

Thank you

amazing video

love your videos been helping me a lot with my recent PC build, me first one too! I cant get a display when I have my hdmi or displayport are connected to my 4070 ti but I can get display when connected to my motherboard.. any thoughts on what i could do? (i've tried reconnecting my gpu to motherboard)

@NupeWoop

4 ай бұрын

What did you find out

Do you have a video of what to do for drivers when you upgrade or switch gpus/ brand

So do I have to buy windows or do I just download for free from a different computer?

Thank you so much!!! Just finished building and setting up my PC with your videos!! W MAN

I love Edge

any pc builds with intel arc cards? would like to see that.

guys if your stuck with bios you can also try use f2 f10 and f12

I built my pc today thanks

this guy is the more passion more footwork more energy guy

Can I use a USB portable hard drive for the BIOS update and driver installs instead of a flash drive?

Brilliant.

Yea putting it together is the easy part

I followed this step by step but when I went to boot up windows 11 my screen goes light blue with no text. Stays like this for awhile then my pc shuts off any solutions?

What to do when windows installs a new Radeon driver while setting up windows and your screen goes black?

Good stuff bro !!!!

Never do any over clicking or activate XMP until you have all the newest updates and hardware versions etc.. especially bios

@alfredolopez5919

9 ай бұрын

I just finished building my pc and I activated xmp and it wouldn't boot up so I had to do a motherboard flash and I'm at the beginning again but my dram light on my motherboard is on should I update everything then do the xmp to see if it goes away it's extremely disappointing

Is there any website you know of that people sell popular gaming items without an insane mark up? Really trying to get the nzxt h9 flow or the o11 dynamic evo, but they are always sold out

Did you have windows 10 home preinstalled before upgrading to windows 11

he recommends 32gb drive but all you need is 8 gb flash drive

Im planning to switch to a 5700x, from an i5 9400f. Anything ryzen specific id need to set up or enable/disable? Gigabyte mobo

I always get Intel CPUs with built in graphics, I update windows, instal all the Nvidia programs and drivers and then I swap over to the GPU

Should I bupdate my MBs BIOS first before installing windows? Haven't built in over a decade, I can't even remember what I did before. Lol. I know I have a Microsoft account and windows 10 from my old PC, just not sure

I am confuses so I have a RM750x PSU and a Rog Strix B660-A motherbored all the cable connect but the CPU one good on the CPU end but now the motherbored end??? plz help ; )

sometimes if you install windows on a PC connection, windows might not actually install a network driver

What kind of computer is on the cover? Is there a video about the build?

Question I have the Msi b650 gaming plus WiFi and there is no xmp setting anywhere in the bios trust me I checked everywhere and no xmp but there is an expo setting is that the same thing or not?

Got it... Now I just need a pc

where can i get hw monitor pro ? When i try to use the page cpuid it won’t load up the page for me

If I don’t already have windows 11 should I buy the windows 11 usb stick from Microsoft

I was trying to boot my pen drive on same pc tht I built instruction are unclear

Why doesn't my pc load to windows? It always loads to bios and I also checked the boot order several times

can you do this stuff if you aalready have a pc and havent set it up

I am working on this bootable drive part of the video and it is a little unclear. You start at the windows page to download the file and then immediately jump to installing the flashdrive and it looks like when you plug in the flashdrive, the website immediately starts downloading and formatting the flashdrive to a bootable version of windows. Any chance you can clarify? The video is great, that part just seems a little unclear

@JJFlores197

3 ай бұрын

The website is to download the media creation tool. He runs the tool after its downloaded and the tool then downloads the files necessary for a Windows install and then prepares the flash drive for the files. The website itself doesn't do anything on the flash drive.

Finally I got it from keyr (Make sure to include the dot (.) between "keyr" and "org") I like some of the transitions, but sometimes they're a bit too much and are seemingly random. Since we use these persistent elements that transition across pages to indicate some kind of relationship between the previous and the next states, some of your transitions confuse me because I can't immediately see what the relationship is. For example 2:23 of the selectable tiles (which weren't selected) transition into being two switches... does that mean anything? are they related in some way? I see this as random and a bad use of the design language. However, at 1:14 I like the transition from switches to the ticks on a paper, that makes sense to me. Epic presentation tho

All PC Builders in KZread seem to skip installing legally Operation Systerm, and they do not shows how to installed OEM DVD Operation Systerm or how to legally have WIndow.

@JJFlores197

2 ай бұрын

No one uses OEM DVDs anymore dude.

@linkzellda

2 ай бұрын

@@JJFlores197 And? What is your flimsy point? You're not saying or helping much, and all you are doing is being a huge condescending person about it.

hello can you help me out built new pc but i cant get buy the windows connecct to internet i have tried shift f10 but i cant type in the cmd box keyboard not responding how can i get it working and how can i update the drivers for the wiffi or lan off the msi website i have them but can you install them from the bios screen

So can I install the drivers onto the same usb I installed windows on or I need a different one?

@JJFlores197

3 ай бұрын

Yep. You're not actually installing the drivers on the USB. You're just copying the driver files to the flash drive so that you can then install them on your new PC.

@twentyjeans4234

2 ай бұрын

​@@JJFlores197 do i need to extract the driver zip files before the installation process? You seem qualified

@JJFlores197

2 ай бұрын

@@twentyjeans4234I would do it. if you try running the setup file from within the zip file, it will either only run the install file which will fail because it needs the rest of the files or it may extract them to a temp location and then run. I would just extract them and install.

I’m brand new to pc and was curious if I should install some type of antivirus software like McAfee or Norton in addition to all this stuff?

@JJFlores197

10 ай бұрын

No. McAfee and Norton are crappy programs. If it says anything, before John McAfee (creator of the McAfee antivirus software) died, he said he hated his own software..... Windows has a built-in antivirus called Microsoft Defender. For most use cases, its good enough. If you need something more robust and unobtrusive, I use ESET NOD32. As long as you're prudent with what you're downloading, you should be fine.

just done building my first pc, but I have no idea why it won’t connect to the internet or why it won’t show any available Wi-Fi options.

If my new pc already have windows should i reinstall?

I'm super confused about the drivers part. Do I have to download the drivers from another computer onto a flash drive and put the flash drive in my new pc, or do I just download the drivers straight onto my new pc?

@JJFlores197

2 күн бұрын

In most instances, it doesn't really matter how you do it. A lot of these channels advice downloading the drivers onto the flash drive so you can quickly install them as soon as Windows is installed. In essence, you're doing part of the work before hand so that the drivers are ready for install. It also may come in handy in the event that your Windows install doesn't have network drivers built in. In that instance, you would need to download the drivers on another working PC and then transfer them to your new PC via flash drive.

i love how i won't have enough money for all the pc parts untill like april 2025 but i already saved it