What Stagebox Can I Use?
Instantly set up your mixer with this free template:
www.offshoreaudio.no/mix-temp...
Get the first module of the workshop “Unlock Live sound”, absolutely free.
www.offshoreaudio.no/free-wor...
Knowing the difference between analogue and digital stage boxes is just the first part. When you’re going to go digital you need to know a bit more to make sure you make an informed decision.
In this video, you’ll learn about the different ways that different digital stage boxes and mixers communicate as well as some of the easiest ways to find the digital stage box and mixer combination that will work in your case.
Пікірлер: 22
Thank you Andrew,. This is exactly the video I've been looking for. Incredibly clear discussion of connection issues. I'm subbed for life 😀🤟
@OffshoreAudio
2 жыл бұрын
Hey, so glad to hear it's useful! If there's any other things you think I should cover please let me know 🙂
@DeathByHumbuckers
2 жыл бұрын
@@OffshoreAudio Hi Andrew. My biggest question is all about latency. How do the various standards complete in terms of round-trip latency? Edit: I'm looking for lowest latency with a a tiny network, basically point to point.
@OffshoreAudio
2 жыл бұрын
@@DeathByHumbuckers off the top of my head aes50 has the lowest latency of the common digital protocols. The mixer that you're using would affect a return trip though. I could have a look into it and do a shootout between aes50, Dante and giga ace. Dave Rat did an experiment where he had around 0.1ms latency on aes50. He might have other useful stuff looking at latency: kzread.info/dash/bejne/moeNuqOPXdXWf8o.html
Very informative and helpful, thanks Andy!
@OffshoreAudio
2 жыл бұрын
Oh you're more than welcome Serhat 😁 thanks for the feedback!
Thank you so much sir for your packaged information.
@OffshoreAudio
6 ай бұрын
You are most welcome
I love this video..please make some video about setting of comp ,limitter,gate
@OffshoreAudio
2 жыл бұрын
Thanks so much! So glad you found it useful. Sure thing, I'll definitely make videos on compressors and gates.
Missed one very important point, or two. 1 The Midas and Behringer consoles have a card slot for I/O. Cards are available for supporting other protocols such as Dante. With the card, and a Yamaha Dante stage box, now they connect. Maybe.. Next is system clock speed. All components must support the same speeds to have them sync. Midas and Behringer use either 44.1 KHZ or 48 KHX. Not sure what speed the Yamaha uses. Allan and Heath operate on 96 KHZ so it would not be compatible, even if the protocol was correct.
@bilalcagilci3883
2 жыл бұрын
bama göre bütün markalar 48 mhz ayarında olmalı,44,48,96...
great explanation!!!
@OffshoreAudio
2 жыл бұрын
Thanks a lot!
can i use cat 6 ?
@OffshoreAudio
Жыл бұрын
You can, any number above 5e, so cat5 won't work but cat6 and 7 will. Aim for STP cable, shielded twisted pair, preferably with ethercon connectors
@peteryousef5177
Жыл бұрын
@@OffshoreAudio thank you very much
@OffshoreAudio
Жыл бұрын
My pleasure!
First
@StegjaboabWatson
2 жыл бұрын
Sorry I couldn't help myself...
@OffshoreAudio
2 жыл бұрын
@@StegjaboabWatson bringing 2006 into the present day!
You should probably use an shielded, and bonded ethercon connector on your connections as it is IN THE SPEC... you could blow our AES-50 ports with ESD.