*Use code "THELAZY" to get 15% off your next Toyhax order!* toyhax.com/for-legacy/7516-labels-for-lg-breakdown.html *Buy your own 3D printed Countach front here!* www.thelazyeyebrow.com/products/countach-conversion-for-legacy-breakdown *And don't forget the spoiler!* www.thelazyeyebrow.com/products/segmented-spoiler-for-legacy-breakdown *Print your own from Sam!* cults3d.com/en/3d-model/various/legacy-breakdown-lamborghini-style-vehicle-reshell Videos used: Dr Lockdown's Breakdown Review: kzread.info/dash/bejne/omSTp4-HaMeXiKg.html Freddery's Geewun Redone Episode 7: kzread.info/dash/bejne/kaBhl6qOoN2WfKQ.html

@raymondcain6760

Жыл бұрын

Hey lazy , in the nearest store to me there is only dragstrip , no wave 2 or 3

@tonyagraham7365

Жыл бұрын

Hey lazy, do u have a discord?

@TheLazyEyebrow

Жыл бұрын

@@tonyagraham7365 sort of. I have one that I primarily interact with, but I wouldn't call it mine anymore

While I kinda understand not caring about the alt mode to a certain extent since the car is statistically the least important mode for a combiner limb but the fact they were considered ditching the chest and HEAD is just utterly insane, like that is wild. Also that wave one overstock isn't just a Canada thing I think my local Walmart manages to get more arcee everytime I vist I'm utterly confused where they keep coming from.

@TheLazyEyebrow

Жыл бұрын

oh sick! glad Arcee was made in such abundance that ignorant managers must think that nobody cares about TFs anymore

@RevengeoftheBallen831

Жыл бұрын

@@TheLazyEyebrow Distribution has been getting worse and worse. My US Target compensated for the lack of Legacy by swamping us with shelves of Metalhawk, SS86 Arcee and Ironhide, and a glut of Earthspark and Rise of the Beasts gimmick figures. I really liked the show and movie, but those toys just do them a major disservice to the public eye. I haven’t seen anything from Legacy Evolution wave 2 yet in my area, and Shrapnel is sold out everywhere. It’s a pain to be a collector now.

@landenhartig

Жыл бұрын

At my local U.S Walmart we just started to get rise of the beasts figures

@RevengeoftheBallen831

Жыл бұрын

@@landenhartig Oof. I haven’t even seen any of the mainline figures in my area. Just the gimmick ones.

@The_Unknown_Animator9965

Жыл бұрын

At my target (in u.s.a.) they don’t put new things in until the old things are sold out so we still have ss galvatron siege mirage, and a few legacy figures. The only Rotb figures we have is core class and the weird mask things that pass off for being a “transformer”

I kept saying the only mold change needed was a better front end and a line on the windows. Thank you for giving us what could have been

@JadeMythriil

Жыл бұрын

By god! Changing the hood section really helps with at least convincing us that its a lambo and I'm angry at hasbro that they didn't allow it to happen!

What if the stop-motion wasn’t on a diet

@Jazmission

Жыл бұрын

Good question

@flamedude6849

Жыл бұрын

Probably a full menasor review

@jackryderproductions1030

Жыл бұрын

You mean like overfed?

@Gigas0101

Жыл бұрын

@@jackryderproductions1030 probably more like a balanced diet.

@PaleotrexProductions

Жыл бұрын

Obese stop motion

I can just imagine breakdown having a nervous breakdown (lol) about how he was promised a car mold that was like his old look but got wild riders car in white. Going catatonic about how wildrider has been planning to replace him in the combiner and other paranoia stuff while the other stunticons look on In annoyance, pity, and whatever dead end’s feeling at the moment.

This is why I always hold off on investing in combiners until every member proves themselves worth having. There’s always going to be one member (whether you think it’s Dead End or as-he-released Breakdown) that could drag down the whole set. Planning on picking up a Drag Strip if he’s still available (with my area’s Walmarts, he probably is), and a G2 Dead End as standalones unless the rest of G2 Menasor is easy to find.

While I never mind the original Jalpa vehicle mode (I still blame the higher up suits), The Countach kit looks great! You and Sam did a great job for what you have to do. I hope you do put it up in your store so I can but it immediately! I’d also love to see you make some new wheels for Breakdown so you can make him more different and I would also love to buy those. (Edit: it’s up on the store right now, hell yeah! Thank you for putting it in)

@thelocaldoofus1147

Жыл бұрын

Also, the more I look at Breakdown’s vehicle mode, the more I see it as being the 25th Anniversary Edition Countach unlike the Lambo brothers who are LP500S, mostly because of the sideskirts. Which I actually think helps distinct him more from them. I’m really loving this kit more

@Donir100

Жыл бұрын

Jalpa was a underrated lambo,in my op it looked nice,it was bassically the countach but cheaper and v8.

@thelocaldoofus1147

Жыл бұрын

@@Donir100 exactly man, the Jalpa is a car that actually deserves more love tbh, it was truly the equally handsome V8 brother to the Countach and it’s one of the reasons I will always love it for that.

Stuff like this is why I'm liking Magic Square and Newage more and more. The quality and engineering is leaps and bounds better, and they are the size Hasbro will be at in a few years lol

@sidearmsalpha

Жыл бұрын

If someone would oversize all the MS and NA stuff, I'd be all over it. As it is now, I only pick up certain releases like most of the Skyfires they put out because he's my favorite Transformer and they both did a pretty good job on them rivaling even what Takara did with the MP version.

Let's hope the new movie gooes big enough to put everything back on a solid footing and convince the corpo bean counters that Transformers is worth a full five bean soup.

It's really a shame how they butchered the car mode, while I did defend it to some degree in my own review I won't lie the Jalpa thing was the only way i could let it go as I do love that car. Honestly the fact that it was a higher up choice isn't surprising and only makes it more infuriating, I still love the robot mode but with out the car mode I still find myself looking at my CW one. I keep a lot of my old figures anyway so I just use the old one for car mode and the other for robot mode.

Can’t wait for the upgrade! Finding breakdown is gonna be a pain though…

When you put the figure in the coffee the only thing I was thinking was "cranix! Ahhhh" because imagine having to clean coffee stains off of a plastic figure

I hate to say this but there's no way I'd be able to live with those 3D print lines that are highly present on the Lamborghini mod.

@TheLazyEyebrow

Жыл бұрын

Seems to be the general consensus. And that's very fair. There's unfortunately not much that can be done on my end about it presently, but I might look into it again at some point

Just going to say, distribution is horrible. I have Motormaster, Dragstrip, and Breakdown only because deluxe waves 2 and 3 completely skipped my area, and I prefer to shop local before resorting to online.

@Toasted_Failure

Ай бұрын

In my local shop bulkhead is a shelf warmer

I wasnt convinced about the car upgrade until i saw this video. It looks so much better with that new front end

I've learned to NOT put anything past hasbro.

Just ordered the kit from your website. Thanks a ton to you and sams forge

I love your content man keep up the awesome work! Love you man

I love the recap in the beginning of the video.

The Lambo upgrade piece looks really cool! It makes Breakdown look alot better!

Good to see that not only I was disappointed by this figure.

The long wall of text was more scary than the innaccuracy of the car mode

I dig the racetrack background in the thumbnail!

@TheLazyEyebrow

Жыл бұрын

It's Nurburgring haha, used Asseto Corsa

Watching this now in 2024. We’ll be patiently waiting for Motor master.

@cordak_Blaster

3 ай бұрын

And even now we are waiting

Although we hope to get a motormaster review soon. We understand all the issues and so we wait patiently. Best of luck!

I hate this figure. I pre-ordered it to complete Menasor, and already knew what I didn’t like about it. I would’ve just been happy with another Wildrider with a partsforming piece. There are two problems I wasn’t ready for though, the holes that connect to the combined mode are painted inside which makes it really annoying and tight. Oh also the windshield is bent and if I properly get this thin* into bot mode I’m certain it will fully snap. Thanks a lot Hasbro QC!

I still quite like him, but you do have to remove him from the context of what he "should" be. Shouldn't matter that much for combined mode collectors though, since he isn't visible, though guys like Lazy I get with the vehicle mode enthusiasm.

I struck lucky to get all of these at retail May 2022 dragstrip Skip several months of Velocitron and legacy wave 1 clogging up the shelf’s December 2022 wildrider and motermaster Wave 2 is literally only there for 2 weeks Very early January wave 3 shows up In Walmart and the last store I went to had dead end At the same time for like 2-3 weeks the first wave of legacy evolution shows up in target so I get breakdown And now I’m going to target tomorrow to hopefully get most of legacy evolution wave 2

Devastator looks great!!!!!

Finally an actual video

8:15 Cool, you have SS Gamer Edition Optimus, can't wait for the Review.

The way he looks is how very often Breakdown always looked off as in vehicle mode in the G1 toon!

By the time I got Breakdown, most of my interest in this set was gone. Started shockingly amazingly, but went downhill after a while. Added him to Menasor with barely any messing around in Breakdown's robot and vehicle modes and hasn't moved since. Not a bad toy, but definitely one I only got to finish the set. Everything else doesn't do much for me.

second place oh man i was waiting for that.

Your work is amazing

Still looking for one. At a point where I don't if I care to get anything other then BeachComber.

I honestly want to see a compilation of LazyEyebrow toy review stop motion scenes that's just filled with scenes like at the end of the video

@TheLazyEyebrow

Жыл бұрын

that's actually what I'm currently working on haha

@Teg1nMusic

Жыл бұрын

@@TheLazyEyebrow LET'S GOOOOOO

One thing I like to do with wild rider is to flay the backpack out, not like the cape, but like wings, it differentiates wildrider from breakdown and slims him down a bit as there isn't as much car hood behind the torso.

Appreciate the review. I bought mine about three months ago and, not only is it still in it's box, it's still in the bag I bought it home in. In the hallway. To my Mum's frustration! I'm never getting around to reviewing it because I just don't give a toss anymore. Speaking of frustration, 3D printed plastic can be sanded, why does no-one do it?! Drives me up the bloody wall seeing all those lines like that! It'd make it look 100% better if you took ten minutes with a Dremel mate! Over 35 years of model making makes me see this stuff and it itches my brain.

@TheLazyEyebrow

Жыл бұрын

I mean it would, but I'm not about to sand every kit I sell, and I'm not doing a video showing a thing I'm selling with it not coming how it's shown

@ModelsExInferis

Жыл бұрын

@@TheLazyEyebrow Then you just say that you've finished the item for your figure and the ones on the website are unfinished. Models don't come assembled and painted, you do that yourself, 3D printed kits are no diffent. I just couldn't show something unfinished, but like I said, 35 years of experience in the field make it that I can't abide things being less than the best they can be, I'd *have* to sand and paint it!

I have all the stunticons (except motor master because $90 on a god day) and have seen a few evo figures like needlenose

Mm I thought the Lamborghini in Motormaster’s box art was supposed to be Clampdown

1:12-1:18 had me laughing til my eyes got watery. See ya in at least 5 months, Motormaster!

1:12 Truly this is the way to read books.

God toy hax got you and Patriot prime pushing stickers for them haha . I couldnt afford motor master so not picking any of these guys up fun review

@justinfawcett7844

Жыл бұрын

Keep an eye out...Motormaster is farrrrr cheaper now with the newer release run. For example, when I bought mine off Amazon, it was "on sale" for $167AUD and is now set at $125AUD....which will potentially get discounted either at the end of June and/or at November/December for the Christmas sales period. I bought extras to sell later and well....they got me good

As ghastly as toy prices are these days, you'd think a completely original car mode for Breakdown would've been a given. "WELL THEIR BEST SUCKS!!" Thank you, Freddery. lmao

The more time passes the more I think that 2024 joke wasn’t a joke

Its time for the big one soon

Just shaved 1/2 the one nub on the spoiler and it's not a parts-former anymore😅

I know you would never make this but it would be cool if you made a hood replacement to resemble the combiner wars alt mode's front

I like the media-offline-gun.

Dragstrip was the best out of them.

Looking forward for Motormaster

When are we gonna see you make a review for the new rotb figures

Usually I'm not bothered when the alt-mode isn't dead on to the real vehicle, but when it's something iconic like a countach, just... Yeah, ugh, Breakdown deserved so much better.

I haven't been into transformers for a while i decided to rewatch transformers war for cybertron although not being very good it ended up making me purchase the seaker 3 pack from amazon and then i watched you reviews just for the animation and effort you put in and now i have to say im fully emersed into transformers again thanks lazy you made my day again It reminds me of when you reviewed wfc cyclonus and i ended up buying the figure it had to be the best transformers figure i bought aside from earthrise prime So in short i just waant to say thank you

Can't wait for Menasor

I have THAT Figure, Lazy!

Him:“And on my schedule it will probably come out in 2024” Me then: “ha” Me now: “he wasn’t kidding”

@TheLazyEyebrow

Ай бұрын

@@Mrskibidiroblox I really wasn't

I like to imagine the fender attaching to the gun as being similar to the bumper sword from Fallout New Vegas. It’s not a one-to-one comparison but it works for me.

Another really nice video, the uncanny valley bit was really funny. Is it a bit? Maybe a half-joke.

@TheLazyEyebrow

Жыл бұрын

It's a recurring visual I go back to sometimes

I completely forgot about the Lamborghini Jalpa. Sylvester Stallone drove a black one in Rocky IV. Thanks to you, I will now consider my Breakdown as a Lamborghini Jalpa instead of a “Countach”. It kinda looks like the Jalpa. Thanks! 😂👍🏼

I took some white tape .. cut it thin , ran it down the window Voila

Dr Lockdown? In my Lazy Eyebrow review? What a treat! Overstock is nuts but this time I actually appreciate it. I haven't been back into collecting for quite a year yet (if you don't count getting Siege Optimus in 2019) but thanks to overstock I've been to get figures that are at least 2 years old. I got Kingdom Cyclonus at a comic/manga shop about a month ago and then a few days ago I decided to buy a Studio Series Sweep to be my Scourge. If it wasn't for overstock keeping Sweeps in my local Walmart I might not have been able to get him. Legacy Evolution though? Fat chance. Absolutely nothing.

What happened to that custom legacy laser prime you were making, I was rewatching some of your videos, and im just wandering what happened too it

@TheLazyEyebrow

Жыл бұрын

Finished it, just need to make labels, which I'll probably do sometime this summer

@Burrito_Bandito0000

Жыл бұрын

@@TheLazyEyebrow cool, can't wait to see that

great job about Transformers Legacy Breakdown Accurate Figure Model Toy

He’s got actual legacy toys in his stores that’s insane

If it wasn’t 3d printed I’d be all over this

WOOOOO

Epic

i hope we get a prime breakdown

In our country we have on the shelfs bumblebee movie figures like Soundwave and wave one of Transformers cybervers and maybe like one or two legacy bulkheads😂😂😂😂

Simmons’ boss is to blame

Car looks nice to me

Just watched the other reviews for the Stunticons earlier, this was a pleasant surprise! Will you be doing a review for Motormaster + the combined mode at some point?

@TheLazyEyebrow

Жыл бұрын

Yep

Nice

Maybe that's why Breakdown is the paranoid one: he scanned a Ferrari and got a bodykit to make him look like a Countach and he's scared someone will notice.

Hey lazy eyebrow will you review any of the studio series Rotb figures?

you should try sanding your prints more

Question about the 3d printing, is it possible to clean up the lines with a file? I can't afford a 3d printer so I'm mainly asking for the people who seem put off by your fix. I liked the fix, but I can see where they're coming from.

@TheLazyEyebrow

Жыл бұрын

Oh yeah you could very easily sand this down if you so desire

Damn, I absolutely love Bumblebee Arcee, so I'd love to buy out all of those figures shelf-warming at your Canadian stores to make room for newer figures. The figures warming my store shelves are all garbage I have no interest in, sadly, so I have nothing of interest at the moment.

Apparently the stock backpack being able to segment from Wildrider was done preemptively for Breakdown to emulate the spoiler placement of the G1 animation model. Make of that what you will. Anyways, can't wait to see the Motormaster review!😊 Edit: I didn't put that emoji there, either my big fingers did or the keyboard itself did.

@tracytron7162

Жыл бұрын

What are you talking about? The spoiler isn't even on the G1 animation model from what I can see

@skuffy4930

Жыл бұрын

@@tracytron7162 then I have no clue what it's about.

Would you do a video where you combine the 3D printer mod with toy hax stickers

im very happy with the stunticons, yes its not a countach but it looks good to me, sideswipe and red alert are almost the same, so why not this 2? its not perfect but the legacy stunticons is like a 8/10

Canada seems to be no different from my Walmarts. Wave 1 of legacy when legacy is out the door.

Honestly, I’d rather go with combiner wars, but that’s because I prefer the combination, and besides dragstrip and motor master I think the figures are better

1:24 😦

4 down, 1 more to go

@arizonaicesuntea9922

Жыл бұрын

Who's the last one? I forgot

@MaybePhantom5133

Жыл бұрын

Motormaster

I've said this before, but the lack of aesthetic cohesion between figures, coupled with the unfortunate Managerial mishap that is Breakdown, really leaves this set of figures as one I do not regret skipping out on.

I still haven't found this guy in stores...

@yetanotherspuart3993

Жыл бұрын

Same, missing Dead End as well.

If you don't like the mold or figure, then why buy it?

I think the 3D printing artifacting is a lot more distracting than the wrong vehicle mode, but that might just be me. I do really like this set of figures but it's a shame that Breakdown didn't get the alt mode he deserves. Regardless Menasor is still awesome, even if 3/5 of them are a bit lacking. It's still miles above any CWnbiner with the lack of combiner ports and the overall sturdiness of it all. Dragstrip and Motormaster are really good too, not sure that they justify the rest of the set all the way.

@TheLazyEyebrow

Жыл бұрын

that can be mitigated with either sanding, or printing on a resin printer and painting it, but neither of those are cost effective for selling. of course, you're always welcome to sand your own when you buy it but you're definitely not the only one. there's been quite a mix of people saying the same and that's quite alright

@cyankoopa8111

Жыл бұрын

Ah, gotcha.

That's exactly how it is in Walmart's here in the U.S.

I really wish Sam’s upgrade could be produced with a finish closer to injection production. The artifacts of 3D printing are more distracting to me than it being the wrong car.

@TheLazyEyebrow

Жыл бұрын

I might go in and figure out some way to re orient as it's a common remark As is, printing vertically is out of the question

❤ Transformers Legacy Stunticons toys... Shoutout to jmav David 😅

It's ok that they have reused a figure and add some details but would have loved a better if it was a new mold

okay see you 2025

Some 3rd party replacement parts really need to be injection mold. ...The print lines make it look like a "Ferrari cake" (if you get the SOUTH PARK reference)

@TheLazyEyebrow

Жыл бұрын

Yeah, would prefer it printed vertically to negate that, but it's kind of unavoidable

This is why I only collect 3P.

Did you just drop the figure into the coffee

I’m wondering how you found a blizwing here.

@TheLazyEyebrow

Жыл бұрын

I think I got it through pulse way back in the day