Super useful video. Thanks so much. Helped me a lot in opening up my unit and cleaning a stray dust particle that got inside 👍⚒️

How to replace lens and where to buy lens?

Which is the aled recognised model ? I'm not able to find it by the code on it...

you didn't show the bottom view. is the threaded tripod mount attached to a metal chassis or a plastic body?

can you upgrade the RAM?

This projector dust proofs or not?

Thank you for this video. It inspired me to upgrade the fans using Noctua and is so much quiet now!

@wk8465

Жыл бұрын

Hello, what's the size of fans?

@maiba02

Жыл бұрын

@@wk8465 40x10 mm

@wk8465

Жыл бұрын

Thank You!

@sixtheninth

Жыл бұрын

@@maiba02 yeah, but the problem is that the only Noctua fans I could find are either 3 or 4 pin and the fans from the projector both only lead out with two red and black wires out of each into a preperared socket housing. The Noctua fans each individually come with 3 or 4 so that meands 6 or 8 total which makes no sense as there is no socket accomodate those :((

@maiba02

Жыл бұрын

@@sixtheninth the noctua come with the “noctua omnijoin”. It is an adaptor which you can use to match the 3 cables from the fan to the two pair from the projector.

Does anyone have info on the led used? Can't find any information and am considering replacing mine for something higher power

Hello, is the HDMI port soldered?

Thank you. My projector had fallen and the remote stopped working. Turns out it was the receiver had been disconnected.

how many inches does the lcd screen have?

My projector has a dark burn spot and it is spreading until it totally covers the display so I cannot see the views showing. Your video blog helps me open my projector but my problem is where I can buy and replace glass with the cable connector on the polerizer film. My projector brand is yookie S10. Only 4 months old only and it is damaged. Does anyone know where I can buy parts?

Does anyone know what the dimensions of the led?

Hello po. Paano po yung zeemr d1 pro e dismantle?

Goob 👍🏻

I'm thinking of swapping the two thick fans with something like Noctua. Any chance of what telling us what type of fans might those be? I didn't want to tear down the project, if i can't find a better replacement for the loudly fans. Much appreciated!

@Zeddify

Жыл бұрын

those seem to be 40mm fans

@sixtheninth

Жыл бұрын

Yeah!

What are those stuff?

❤. This where the polarizer film. Bro ?

Olá, meu LCD está com defeito, onde posso conseguir um novo?

Can someone tell me the fan size of those two small Noise fans, I can’t find anything about the size and specs of those and I somehow want to find replacements before taking it apart. 😅

Your nail is quite the tool haha

Nice 🙂

I succeeded in disassembling the projector with your video. thank you My projector is (WANBO T2 MAX). The power connection part came off. The female power connector was broken. I'm trying to attach the power supply wires directly to the board. Can you tell me where to put it? I can't upload a picture ㅠㅠ

Having trouble to open my yg500 projector. Cant find the screw. Dont know how to open it. Many dust inside the lens. Cant enjoy movies when seeing a dust

Nice

100th like ❤️

Which of those internal projector screens is the polarized filter?

@kernabellon7314

12 күн бұрын

I think the one in the center of those 2 separate glasses. Mine is damaged and I need it replaced but I do not know where to buy it.

Hello, I have the Mi Smart Compact/Youth projector and it’s bricked. It’s stuck on the mi logo on boot and doesn’t start up. I tried resetting through the Ok+Back button method but it doesn’t go into recovery. Can you please tell me if there is a way to reset the projector by unplugging something on the main board or some switch on the board? It’ll save my projector. Thank you :)

@Nomad_Wanderer

Жыл бұрын

Try re factory reset if that doesn't work then you need to re flash the boot img Android iso.

Cara preciso de ajuda o meu tá com a película polarizadora com mancha de queimado aí quando eu ligo aparece uma mancha pequena na tela onde acho essa do modelo do meu pra troca o meu é o wambo t2r Max essa do T2 Max funciona nele me ajuda aí ok ?

@amandabarros1279

6 ай бұрын

Oi, vc co seguiu arrumar o seu?!! O meu por aqui também está aparecendo uma mancha preta quando eu ligo.

I wish that the chinese manufacturers put a 4k LCD screen the projectors in future. I would buy one immediately!!!

@Nomad_Wanderer

Жыл бұрын

Just replace the internal 1080p screen with a Quad mobile screen i am sure it can do the job.

@verschepard

Жыл бұрын

@@Nomad_Wanderer that was my thought also, cause I got a few China LED LCD projectors here at home. Maybe your know something about, but the screens in most of the projectors are 5 or 6 inch is this right? And then - maybe I found the right screen and put it in one correctly - is the internal hardware powerful enough to handle it? Including things like keystoning etc? Eventually do you know a site with a how to or something else? Greetings from Germany

Do you know what is the input voltage range of this projector? I would like to use it as portable projector. I think it should work with 18V Dewalt batteries (working voltage 16-21V). I saw some car chargers, they looked like just a cable without any voltage regulation circuit, but the car battery have also a voltage between 10-14.4V. Wanbo customer service don't want to give me an answer about it, they recommend to use original power supply.

@Nomad_Wanderer

Жыл бұрын

I don't think so the power hungry led lamp will eat all your battery, the screen eats 5v some mili APM rest all the voltage is going in the lamp see those heats the lamp gives out electricity in the form of heat waste

@piechotam

Жыл бұрын

@@Nomad_Wanderer I think 2x 5ah battery should be enough for 2h movie. The question is, if the voltage is not to high when battery is full, or not to low when the battery is on the end

@joonaas

9 ай бұрын

Just take a USB Power Delivery 19V Adapter Cable and power it with >65W powerbank

@tomasotreasaigh111

9 ай бұрын

Great idea, did you ever find a solution?

@piechotam

9 ай бұрын

@@tomasotreasaigh111 not yet, I checked, that normally, the batteries are charged only to 20v, so there are chances, that it would work just like that, without any converter, but did not try yet

Please post how to open zeemr m1 pro

Hi, please kindly send me this projector led chip 500lumens

Where did you bouught this tool philips eletric ?

@nda

2 жыл бұрын

you can buy it on amazon

If my t2free Is burn ( it have big blackpoint on screen when open ). I can buy led for t2 max to change led from t2 free to upgrade to 1200pixel ? (t2 free is 800pixel)

@swegattyswooty9307

Жыл бұрын

Burn point is due to led screen not led light ... Youll have to get the led panel .... If not DIY with a old mobile ..

@sixtheninth

Жыл бұрын

@@swegattyswooty9307 I have a pernament brownish spot in the center of the screen, I assume this is not possible to just wipe right? If so would you know where to buy a replacement Led screen compatible with this projector?

@swegattyswooty9307

11 ай бұрын

@@sixtheninth nha you can't wipe it just get another screen from a Chinese website

O meu aquece e não arma os fãs, porém liga normalmente o projetor. Depois da um erro de aquecimento e desliga. Alguém sabe me dizer se é só trocar os fãs?

@lschusters

11 ай бұрын

O meu está desse mesmo jeito! Liga normal mas os coolers não funcionam e desliga logo a seguir pois esquenta muito

My LCD is broken, does anyone knows exactly how to get a new part?

@marcusrodrigues001

7 ай бұрын

Também estou com essa dificuldade, meu LCD está com um risco vertical. Queria o código do LCD

@renemarquez1878

18 күн бұрын

@@marcusrodrigues001 Hi. Were you able to solve it?

Sir ap merko ye samsang galaxy watch 4 giveaway kr do na plz

is the RAM expandable?

👍🏿👍🏿🤩🤩🤩😍😍😍🥰🥰🥰🥰😘😘😘

Hi, is it possible to upgrade the LED in this projector to a brighter one?

@GAJENDRA19061992

2 жыл бұрын

bhai projector hai Pokemon nahi jo viksit karonge

@JohnDoe-zr6bk

Жыл бұрын

@The Royal Gamer why not? The cooling system seems quite capable.

@sirisaacnewtonsc

Жыл бұрын

I think that if the space where the LED is, you can mount another one with higher lumens and modify the power supply so that it can turn it on. it's just a matter of trying

@Nomad_Wanderer

Жыл бұрын

I think yes that can be done but upgrading the led lamp will emit more heat plus it will eat more current for that you will need more cooling so if you can think of all these problems then yes you can upgrade, i think 500lumens increase is no issue for these heatsink tray replacing the led lamp with a more brighter one. 👍 Cheers

@tomasotreasaigh111

9 ай бұрын

I have the exact same question, could you please tell me if you found out how to do this? If you reply and you were unsuccessful then I will endeavour to find a solution and make a video with relevant info if you still would like to do this. Peace from Ireland mo chara.

It's not like it used to be

Hi

Itena to kr do na sir

wanbo screen burn .... spare parts?

@loop.hazard

Жыл бұрын

The problem, is polarized filter

@sixtheninth

Жыл бұрын

@@loop.hazard I got a brownish spot in the middle of the screen, someone is saying it is the LED screen damaged, you say the filter, can you elaborate?

@imapersononyt.3385

29 күн бұрын

@@sixtheninth Search on google parts of a proyector, prolly is just the filter, it usually burns faster than the lamp

Sir jewab jerur Dena ap to you tuber ho to kr do na sir merko giveaway mere ps itene pese nhi hai me LA seku

@GAJENDRA19061992

2 жыл бұрын

toh bhai Ferrari maang le

Even the T2 have a heatsink on the CPU and the T6 don't, causing random crashes and losing BT/WIFI connection. Very embarrassing for the brand

⚠️ God has said in the Quran: 🔴 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )} 📖Quran

@ahmdabdallah2132

2 жыл бұрын

🔴 What Is Islam? ⚠️ 🔴 Islam is not just another religion. 🔵 It is the same message preached by Moses, Jesus and Abraham. 🔴 Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. 🔵 It reminds us that since God created us, no one should be worshipped except God alone. 🔴 It also teaches that God is nothing like a human being or like anything that we can imagine. 🌍 The concept of God is summarized in the Quran as: 📖 { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4)[4] 📚 🔴 Becoming a Muslim is not turning your back to Jesus. 🔵 Rather it’s going back to the original teachings of Jesus and obeying him.

@kalimaa999

8 ай бұрын

If someone is happily obeying Jesus' command and living in submission to the will of God then what is the need of bringing Islam into the equation? Islam and all religions are man's creations. All of these religions cause division and war. Let each man aspire to know God in his own way and may nobody stand in his way and claim their word is the final word.

Piece of crap. 2 fans were okay, but blower fan was done. Stopped working after less than 1 year, do not recommend this !

Where is CCP spyware?

menuda basur.. mejor un proyector de tecnologia DLP

Hello NDA HACK. I request permission to upload your video as a short video on my channel. Please give me permission. I will tag you in each of those videos and add your channel to the channels tab of my channel. Please give me permission.