What's inside a Corvette (T56) transmission
Автокөліктер мен көлік құралдары
I had the opportunity to take apart a Corvette C5 Z06 transmission (the T56 transmission). I thought people would like to see what it looks like, how the gears work and how the synchros (gear selection) works.
Пікірлер: 53
One of the best demonstrations of a manual transmission I've seen. Thanks.
As an engineering who knows nothing about cars this video was excellent as it actually shows a real world gear box. Assisted me greatly with assignment
That probably the best video about transmissions. Thanks I learned a lot!
Best explanation of how a manual transmission works, I have ever watched.
The shaft that you are calling "gear for your shifting", is called the counter shaft assembly. I once tore that front gear on the counter and the gear of the input shaft, from a 1970 442, W-30. Great explanation, thanks for the video.
This was the best transmission video ever! I’ve been watching stuff learning about as much as I can and this is EXACTLY what I was looking for. Thank you!!!
@vsvenson
4 жыл бұрын
I'm glad it was helpful!
Great video. You are a skilled mechanic and a talented educator. Kudos!
i finally know how a manual transmission works lol thank you!
I thank you for taking the time to publish this!!
This is remarkably useful information, thank you.
That was a extremely good video. Done so everyone can understand it. Well done sir!
Thank you Van for another informative video. Keep them coming!
You have a knack for communication. Nicely done....
Great job on explaining it! makes sense now. Thanks
VERY informative video man. I've always been curious what actually happens in my transmission. Well done!
Super informative video. Well done!
Awesome video, great information!
Thank you for taking the time to make this video. This is the best description of the T56 I've seen. duktigt!, bra! ...regards, kevin
Nice explanation! I learned something today!
Very Impressive great explanation.Thanks
thanks for this video. helped me make sense of many things
This is an awesome video! thanks. this really helped with my transmission fix.
Awesome video. Thanks for sharing
Great video!!! Thanks!
excellent explanation! I thought I knew how it all worked, since I rebuilt two T56s. I never made the connection, that there really isn't a 4th gear..lol! I always called 4th the input shaft, were I guess the best description of it would be 4th dogs, and input shaft! Your dogs look a lot better the mine did! I sharped some of mine up, seems to work ok, everyone and a while they are notchy. And reverse is always notchy, but I couldn't get my angle grinder in to sharpen the teeth on reverse. BTW carbon fibre is the Friction material on the blocker rings.
Very great and informative video. Thanks
Thank you. Excellent video.
Very nice video!
Very cool video. I'm about to embark on the T56 Rebuild endeavor. Nice to see the parts before I see the parts. LOL
sweet vid man. the best. thanks!....from a c5 owner
Awesome video 😀
Very informative, thanks a lot!!!
Thank you .... Well done!
I finally understand what the syncros do
Thanks great info
The only time you stop a gear is when the car is not moving and you are putting it into first or revers.. I can shift a car with out using the clutch while I am going down the road.. You ease off on the gas pedal until it's easy to put the transmission into neutral .. Then you rev match the engine rpms to get the gears on the engine side to match the speed the gears on the drive shaft side are spinning in the next gear that you want to engage.. You have to increase engine rpms to go to a lower gear and decrease engine rpms to get the transmission engaged into a higher gear.. How do I know this ? I have done it for over 40,000 hours in heavy class 8 trucks that don't normally have synchronized transmissions .. Many Eaton Transmissions have three shafts two of them are Counter shafts.. Thus it's called a twin countershaft transmission .. Eaton uses an air shifter to change ranges and the range shifter is synchronized.. As is the air shifter r to spit the gears between direct and overdrive on some models ..
Great video! Would you consider doing a series on the tear down and rebuild of a 944 transaxle some day?
@vsvenson
9 жыл бұрын
Yes! I have two blown up 944 transaxles I'll be taking apart this winter.
Van, very cool video! Question, did you get the transmission back together, without any extra pieces, and working in a vehicle? :D
@vsvenson
9 жыл бұрын
Absolutely! Car is running great.
I wish I was smart enough to understand this. I have a 97 f body with a t-56 and I want to fix reverse, but I dont have a press or a hoist and there is snow on the ground :(
Doubt anybody will respond, but, my c5 makes a loud rattle like whirling marbles In a metal can sound. Goes away when I put my foot on the clutch but comes back as soon as I let my foot off. Already replaced TOB. Could it be I out shaft bearing? Clutch pedal feels perfect and no problem shifting into gears. Makes whirling sound when in any gear. Thansk
@vsvenson
9 жыл бұрын
Angel X. Santana Might be one of the drive shaft bearings...
So when the car is in neutral, what happens in the gear box? What is spinning and what is not? Curious because my C5 whines when in gear but stops completely when in neutral.
@vsvenson
3 жыл бұрын
In neutral, the input shaft is spinning and all of the gear clusters are spinning on a stationary output shaft. When you shift - slide a selector ring to lock a gear to the output shaft - the output shaft (pinion) turns with that specific gear cluster.
@brunic11
3 жыл бұрын
@@vsvenson Thanks, just as I thought. So basically all the gears are always moving if the if the clutch is engaged and car is coasting. What do you think would be the cause in my case? Whine when going into and while in gear and no noise when in neutral?
I was just wondering if the shift forks are brass or are they cheap plastic? Gertrag uses plastic on the tips of the shift forks. ... And I think that's just asking for trouble.
@vsvenson
7 жыл бұрын
The tips of the forks are plastic.
@SHADOWBLACKs650
7 жыл бұрын
Thank you, you would think they would be something of a stronger material
My reverse and 4th gears are gone 😭😭
The gears are all turning all the time .. The Synchro's do not stop the gears.. They Synchronize the drive and driven gears so they are spinning at the same RPM so that the dogs can be engaged .. so that they are positively locked together .. I wish I could get a T-56 with straight cut gears it would be much stronger and more efficiently but oh no straight cuts gears are noisy .. Your explanations are rather bad really but I guess you know how to take a transmission apart and put it back together .. Gear Box Video makes by and far the best videos on Manual car transmissions I have ever seen. kzread.info
@vsvenson
5 жыл бұрын
My intent was to imply they stop relative to the shaft/drive dogs they're engaging with.