Another great video Andy! Keep up the good work!

@brighton_locksmith

2 жыл бұрын

Aww thanks Summer! I can’t believe you watched my video 😊😘

Great look at your tools! Thanks for sharing. 👍

@brighton_locksmith

2 жыл бұрын

Thanks mate, and thanks for watching again 😊🙏🏼

Most Excellent Andy! Many thanks for sharing mate 😎👍

@brighton_locksmith

2 жыл бұрын

Glad you enjoyed it mate. Thanks again for watching 😊🙏🏼

Mate! you have just cost me so much money. I’m like a kid going through the Argos catalog now.

@brighton_locksmith

11 ай бұрын

Hahaha sorry Daniel 😂😂 enjoy those new tools 😁😁 Thanks for watching 🙏🏼

Another excellent video Andy. My shopping list for essentials just got much bigger!

@brighton_locksmith

2 жыл бұрын

Hahaha don’t be sending me an invoice will ya 😂😂 Thanks for watching Joe 😊🙏🏼

Made up I’ve stumbled across this channel mate. Great to see what another locksmith carries and share ideas

@brighton_locksmith

2 жыл бұрын

Thanks mate. Very much appreciated and I’m glad you are enjoying the channel 😊 Thanks again for watching 😊🙏🏼

Cool video seeing all the bits you use. Also good to know which ones not to bother with buying. Thanks for doing this video. %00 by march, thats a good goal., cheers

@brighton_locksmith

2 жыл бұрын

Thanks PW. Yes defo don’t bother with some of that Chinese stuff 😂 🤞🏼 for March 😊

New subscriber, locksmith from SF, CA,USA good luck Andy on your way to 500

@brighton_locksmith

2 жыл бұрын

Thank you David and thank you for subscribing 😊🙏🏼

Great videos, keep up the good work pal 👍

@brighton_locksmith

2 жыл бұрын

Thank you Tony 😁 And thanks for watching buddy 😊🙏🏼

Verynice andy i have got a few kits from andymac very good tools thanks andy🔐🔐

@brighton_locksmith

2 жыл бұрын

Andy Mac is the man!!! Unreal tools 👌🏼 Thanks Steve for watching 😊🙏🏼

The velocity back pack is next on my list of tool bags! The stanley fat max zip didn't last all that long! Nice videos thanks for putting these up and fingers crossed for more subs!

@brighton_locksmith

2 жыл бұрын

I was looking at the Velocity back pack too Andy! I used to have the Stanley back pack and the same happened to me! The zip broke and also the handle on the top ripped off 😐 Thanks mate and thanks for watching 😊🙏🏼

The smiley profile in your Chinese bump key bag fits budget alarm padlocks, I’ve only ever seen one (which I purchased to play with!!) 👍

@brighton_locksmith

Жыл бұрын

Ah nice one, thanks bud. And thanks for watching 😁🙏🏼

Brilliant, similar to my stuff. I like my mighty Dremel though.

@brighton_locksmith

2 жыл бұрын

Ah my dremel has recently died on me 😩 Thanks for watching Des 😊🙏🏼

Thank you for sharing your videos. Locksmiths in the USA usually garage there vehicle's due to thief's breaking into the vans. Hopefully your beautiful isn't as bad yet. Our cousin is a licensed locksmith in Oregon and they can't leave there van unattended when they work in certain places. The company just purchased new van and no longer puts advertising on it.....sad days in the USA...... Excellent video 🙏☃️🎄☃️🙏

@brighton_locksmith

5 ай бұрын

Ah yes!! We have a lot of van break ins and tool theft here too 😢 Such a shame 😢 Thanks for watching 🙏🏼

Another great video, good to see what you’re working with. I finally treated myself to some Veto Pro tool bags they’re amazing. The missing word was tubular and I think we share a fair amount of Chinese rubbish. Lessons learnt 👍🏼

@brighton_locksmith

2 жыл бұрын

I’ve seen the Veto bags too, and they also look pretty awesome. That Chinese stuff!!! 😂😂 Thanks for watching buddy 😊🙏🏼

"51% of people that watched the video don't suscribe" ... WELL THEN i'm spotted now ! Good vids good work ! hello from france !

@brighton_locksmith

2 жыл бұрын

Ah Bonjour. Thanks for watching 😊🙏🏼

tubular lock mate that's what you was trying to remember good tip on the carpet bolsters have to get a pair them a lot cheaper than spreaders

@brighton_locksmith

2 жыл бұрын

Yes, I just couldn’t remember what it was called. And the bolsters are very good 😊 Thanks for watching 😊🙏🏼

Estupendas herramientas

@brighton_locksmith

2 жыл бұрын

Gracias 🙏🏼

Tubular.........Cheers Andy

@brighton_locksmith

2 жыл бұрын

YESSSSSSSSS!!!!! I’d forgotten about that 😂😂😂 Thank you and thanks for watching 😊👍🏼🙏🏼

What a great video 👍 we do seem to have bought the same Chinese crap tho 🤣 although I love my huks 👌with you on the carpet bolster tho I haven't purchased any spades 🤣 our new locky whatapp group have been sharing your videos so new followers there for ya 👌

@brighton_locksmith

2 жыл бұрын

Thanks mate. Some of that Chinese stuff is shocking 😂😂😂 Thanks for sharing the videos mate, I really appreciate that very much 😊🙏🏼

Ford didn't send you a free van yet 👀

@brighton_locksmith

2 жыл бұрын

Not yet Jay……….but I’m still hoping 🤞🏼😂

@Cpt_Can0pen3r

2 жыл бұрын

I love that my 2 favorite locksmiths not only follow each other but, are actually on a first name basis xD just gonna seize the opportunity to tell you both how awesome you are at the same time 😅😁

@locksny

2 жыл бұрын

@@Cpt_Can0pen3r Awesome

@brighton_locksmith

2 жыл бұрын

@@Cpt_Can0pen3r Love this 😊 Thanks buddy

Good Video. I have the same Wera screwdriver and love it. For your bump key kit, talk to your local veterinarian about castration rings. They are dirt cheap and work excellent. I have the same Huk dimple set and the same three piece "tubular pick" set. I need to get some plastic pry bars. Thx for the Video. Only 109 more subs to 500

@brighton_locksmith

2 жыл бұрын

Thanks Gumby 😊🙏🏼

Awesome Video Buddy. Very Cool To See. Keep up the great work. Kind Regards Nicholas, *Lock Pick Nick* KZread, 🧔🏽‍♂️😺🔐🔒🔓🔑🗝🏴󠁧󠁢󠁥󠁮󠁧󠁿🇬🇧.

@brighton_locksmith

2 жыл бұрын

Thanks Lock Pick Nick 😊. Very much appreciated 😊🙏🏼

Andy, the only tool you are wrong about, is the Lishi pick. Here in the States, it's a very useful, and popular tool amongst locksmiths!

@brighton_locksmith

11 ай бұрын

Yeah I know you guys use them a lot in the states. We use them here for Auto and we’ve started use it them a little more on domestic locks but they have a limited amount of use here 👍🏼 Thanks for watching buddy 🙏🏼

Andy how on earth have people not yet subscribe to you.I don’t no what I’d do without you being in my life pmsl ..🤣😂 I’ve subscribed to you twice as I’ve got 2 accounts .. madness I no … am what you call a cereal subscriber.😆🥴

@brighton_locksmith

2 жыл бұрын

Hahaha this is brilliant!!! Until I come out my front door one day and you’re standing there!!!! That’s when I’d worry 😂😂😂😂😂 I really appreciate your support buddy, thank you so much 😊 🙏🏼👍🏼

@TheProdigy1982

2 жыл бұрын

@@brighton_locksmith 😆🤣😂🤣👌🏼now that was funny. I should watch what you wish for mate. You no what fans are like, just look at what happened to John Lennon 🎯pmsl. Not really Andy I am a gentle giant.🐩 Keep them videos coming mate they are epic.🏴󠁧󠁢󠁥󠁮󠁧󠁿✊🏼😉

@brighton_locksmith

2 жыл бұрын

@@TheProdigy1982 😂😂😂😂

Day after this you needed your plane didn't you 😂

dangit. Now I have to get a set of short hex keys

@brighton_locksmith

2 жыл бұрын

Hahaha very useful 😊

Excellent video! Really good to see what's in your bag. You say you don't recommend "Lishi picks at the moment" Why not and why not "at the moment"? Thanks

@brighton_locksmith

Жыл бұрын

Hi Jon. At the time of making the video they didn’t have a 6 pin Yale Lishi but they do now. And they are a very good profile compared to the cheap one that I had! So now I would recommend getting the 5 pin and 6 pin version 😁

You'll miss your planes mate, I'd keep one on them on board your van!

@brighton_locksmith

2 жыл бұрын

I’m gonna see how I go mate! I haven’t had to use them in a while and it’s weight in the bag I don’t necessarily need 👍🏼 Thanks for watching 🙏🏼😊

@doorman13k

2 жыл бұрын

@@brighton_locksmith great videos keep them coming. Hide one under the seat. I seldom use my planes, but every once in awhile get gets me out of a bind. Being a door installer before I became a locksmith, showed me that the hardware is not always the issues!

@brighton_locksmith

2 жыл бұрын

@@doorman13k That’s not a bad shout actually 😊 I think I’ll do that 👍🏼

Handsome !

@brighton_locksmith

2 жыл бұрын

Why thank you 😊

Just subscribed.. Great videos... Got some tools. I've been picking at home for some time now.. Out of curiosity how long have you been a locksmith for..⭐️⭐️⭐️⭐️⭐️

@brighton_locksmith

2 жыл бұрын

Hi Stephen. Thank you for subscribing 😁 I’ve been a locksmith since 2016 but a carpenter for 30 years 😊

Stumbled across your channel whilst looking at tool porn - electrician - and the two got me wanting to build on the beginner locksport hobby I've had on the back burner for some time 😂 seriously think porn would be cheaper than the 'oooo shiny' curse. How does one 'get in' (no pun intended) to locksmithing? Most other trades have defined courses/routes but can't findmuch on locksmithing, bar the MLA courses?

@brighton_locksmith

Жыл бұрын

Hey mate. There are many courses up and down the country, some better than others. I offer a 7 day 1to1 course in Hove. Message/WhatsApp me on 07805121782 and I’ll send you some more information regarding my 7 day locksmith course for beginners. Thanks buddy 😁🙏🏼

Interesting to go through your tool bags. I asked my local Locksmith if he had any old padlocks, didn't matter if they had been cut open as I just wanted some for picking practice. He said he rarely does padlocks and when he does he just drills them. Would you say your experience is the same? Just to say I had watched several of your videos recently after noticing you commenting on lock sport channels and decided to make the plunge and sub you. You have a great channel so you should well pass 500 soon.

@brighton_locksmith

2 жыл бұрын

Ah thanks Roy. That’s really kind of you to say. To be honest, it depends on the padlock and if the customer wants it kept! Thank you again 😊🙏🏼

@roysammons2445

2 жыл бұрын

@@brighton_locksmith 🙂👍🏻

Where is that first screwdriver from it looks bloody awesome! Also you've gained yourself a subscriber awesome content mate.

@brighton_locksmith

Жыл бұрын

Hey Mitchell. Thank you for subscribing 🙏🏼 I’m glad you like the videos 😁 If you mean the black and green screwdriver? It the Wera Kraftform Kompact screwdriver. I believe you can buy them in Screwfix 👍🏼 Thanks again buddy 😁🙏🏼

@mitchellw7118

Жыл бұрын

@@brighton_locksmith I found it as I typed it thank you!! Brilliant bit of kit. However I have now added a ton of stuff to my shopping basket ha. Keep up the good work and getting the content out there.

How'd you get started as a locksmith, Andy? Did you have a mentor or some kind of journeyman relationship? Great video.

@brighton_locksmith

2 жыл бұрын

Hi Richard. I’ve always liked solving problems and as a locksmith you are always having to do this and sometimes having to think outside the box. I I didn’t know anyone previously who was a locksmith I just knew that I would love it and love the challenges 😁 Thanks for watching Richard 👍🏼😊

Hi just a quick question where did you get the drill point cards from very handy to have?

@brighton_locksmith

11 ай бұрын

Hi Ant. They were from eBay! However, a much better option would be to buy Seth’s ‘Gatemaster’ tool. Speak to Seth of Fortress Locksmiths 👍🏼

@ant3d346

11 ай бұрын

@@brighton_locksmith Andy thank you for the info much appreciated ps keep up the awesome content and work 👍

What brand are the kill cards please Andy?

@brighton_locksmith

9 күн бұрын

@@NE-locksmith hi mate. There isn’t a brand on them I’m afraid. I got them from eBay years ago so don’t even know if they are still being made!! Thanks for watching 🙏🏼

That's a tubular impressioning kit

@brighton_locksmith

2 жыл бұрын

That’s the one!!! I couldn’t for the life of me remember 😂 Thanks for watching Rayne 🙏🏼

Please could you tell me where you go to train to become a locksmith and how much dose it cost im a carpenter and had a accident fell and damaged my spine and would like to get back to work mean thanks sorry my name is Gary Cooper

@brighton_locksmith

2 жыл бұрын

Hi Gary. Sorry to hear that buddy. I would recommend Seth Ryden’s course, Fortress Locksmiths. This is the link to his course. Probably the best locksmith course in the country in my opinion 👍🏼 www.fortresslocksmithtraining.com/ Keep me posted how you get on bud 👍🏼

Another great vid Andy. Love the mickey mouse template! where did you get the kill cards and rotary drill bits (upvc hole enlarger) from?

@brighton_locksmith

2 жыл бұрын

Thanks mate. I think the kill cards were from eBay and the burring bits I got from Toolstation bud 👍🏼 Thanks again mate and thanks for watching 😊🙏🏼

could you please tell me the name of the green combi screwdriver

@brighton_locksmith

2 жыл бұрын

Hi Peter. Yes it’s a Wera Kraftform Kompakt Interchangeable screwdriver 👍🏼 Thanks for watching 🙏🏼😁

this just seems daunting for a noob

@brighton_locksmith

Жыл бұрын

There’s nothing to feel daunting about buddy. It’s a very rewarding job. Don’t forget I also run some training courses if you’re struggling 😁 Thanks for watching 🙏🏼

7:20 what make is that screwdriver ?

@brighton_locksmith

2 жыл бұрын

Hey Michael. It’s WERA KRAFTFORM KOMPAKT INTERCHANGEABLE SCREWDRIVER 😊 Great bit of kit that I keep in my pocket and use on most jobs 👍🏼 Thanks for watching 🙏🏼😊

How do you get into been a locksmith?

@brighton_locksmith

Жыл бұрын

Hi Jason. I did a 7 day course to learn all the basic knowledge. Then it takes hours and hours of practice and investing in yourself to improve your skills to become competent. I am running a 7 day Locksmith course for beginners. Drop me a WhatsApp on 07805121782 and I can ping you some more details. Thanks for watching 🙏🏼

Great ! Can you make a video locking out a Medeco Deadbolt? The only one I found the guy Fail ;) Strong Hugs from Brazil !

@brighton_locksmith

2 жыл бұрын

Haha I’ll see what I can do 😁 Thanks for watching Alex 😊🙏🏼