You must use anhydrous alcohol or 97%. The 70% alcohol already contains too much water to absorb a useful amount from the gasoline.

@newzealandhoris4208

Жыл бұрын

It will still work you will just need more I buy 50 mils from the chemist 100% isopropyl I usually put 2 in when I had water in my tank i used 100 ml

Fuel doctor work ,great Australian product 🇦🇺

I love your test heet work for my car

Boom works, with proof thanks

I leave my rotor tiller and snow blower outside all year. Since ethanol is in most gas now I have a harder time starting equipment that has sat for over a month and a half, especially if the temperature from day and night fluctuate and tank is less than 1/2 full. ( more area exposed for moisture build up, good idea to keep tank filled up always to lesson this moisture build up, though it's still inevitable but lesser ). It's frustrating if you don't keep up on the little preventative maintenance. I generally get success with a dollar store turkey baister so I can throw out after or keep in garrage for other junk substances. I deflate the hand bubble and with a non disturbed gas tank for at least 10 minutes or more being still so water and ethanol can mostly seperate, place the tube to the lowest part of tank and slowly fill the baister tube and then empty it in a clear container. Repeating this process over and over. Within a minute or more you can see the ethanol and water mix separating with the layer of water at bottom in the container. Get as much out as you can. I add some methyl hydrate to gas tank. Then there's the junk still in the carb. Old carbs used to have a little spring burp bleeder plunger at bottom of float bowl to remove water or stayle gas but modern one's dont feature this anymore and newer ones are a bit involved as float bowl should be taken off, emptied and hopefully good gas replacing it from fuel line. Been a while, I think Shell medium grade is ethanol free. I've phoned up petroleum company's and talked to their tech reps in past to find out which grades are dos and donts and which ones can vary from different places. I'm in Canada, Ontario. Hope this can help anyone.

@FYMM69

Жыл бұрын

As of October of 2022, there’s not a single station left in Ontario that doesn’t contain ethanol unfortunately because I’d drive out of my way to the few stations left prior to October to buy high octane benzene gas for all my small engines and since then I’ve been looking for a viable solution to rid water from this horrible gas. We can remove the ethanol east enough but what to replace it with is the question because ethanol does have octane and it’d need to be replaced once ethanol’s removed

Helix 5-1 fuel treatment. Works fantastic.

Thank you that tests you share

@AliMECH

10 ай бұрын

You are welcome!

Heet work

Is it harmful to run the Heet/water/gas mixture through your fuel injection system? I picked up some water and put two bottles of Heet in the tank. The engine still occasionally misfires or bucks during light acceleration. My question is does Heet actually remove the water or just lessen the effects of it. I heard it can phase separate.

@FYMM69

Жыл бұрын

It doesn’t work because fuel still separates from water

@dustynbrooks6505

Ай бұрын

Don't listen to him he's a goofball it doesn't take the water out it mixes with the water and makes the water burnable

what kind of petrol is that? so clear like water

@MichaelSangma

4 ай бұрын

Diesel

دەست خۆش ئەو Sea Fomeلە کوێ دەست کەوت؟ لەھەولێر ھەیە؟

@AliMECH

3 жыл бұрын

ACE lasar regay musl

Use Heet

Lucas bur is not istsntantsnius for any prosuct

Drain it from the bottom, the water goes first.

@AliMECH

2 жыл бұрын

Yes, that's a great idea, but some cars dont have drain plug

@texasriffraff

2 жыл бұрын

@@AliMECH but on lawn tractors works great cause you just have to pull the gas feed from the carburator and it drains from the bottom.

Spoiler A. None of it worked after watching him pour talk, describe pour talk. YW.

I'm

I like the أذان Prayer in the background

@AliMECH

9 ай бұрын

Thanks 🙏🙏

The big problem is Entrained air in the fuel when it's in the car fuel tank.... Proven.... By Engine Polygraph. We cannot see inside the tank..... Its a big Foam Party.... And the automotive industry does not know about it.... But your injectors do.... Injector cavitation is a big issue. No driver ever returns manufacturers claimed MPG figures.... The fuel economy figures are in decline as soon as the engine is run from brand new. Oxytane vastly improves the Air Release properties in the fuel restoring fuel economy..... The only additive that works.... It does not alter the fuel.... It does not make more power...... Only restores lost fuel economy... And virtually makes injectors last forever. Water in fuel is actually a Minor problem in comparison to Entrained air in fuel.... Proven by Engine Polygraph.... Seeing inside your engine.... Like magic

How many of these dumb jar of water/gas testing videos are on KZread? 1,000? If anything did adsorb that much water, it wouldn't run the engine, it would ruin it. The massive overdose of fuel additive would be every bit as damaging as the a massive overdose of water.

Why is the gas clear? This seems fake.

@AliMECH

2 жыл бұрын

Why would I make it fake?

@fabcatalogna3367

2 жыл бұрын

all fuels are clear like water as per alcohol ..they put color into it just for distinctive purpose

I used sugar, works great!

@DEVILDOG1964

7 ай бұрын

LIAR I DO BELIEVE!! SUGAR WOULD NORMALLY RUN AN ENGINE

Sugar