Your 8 minute video explained it better than my professor did in two hours... Thank you

@mikerousi443

5 жыл бұрын

Or use the rest 112 to explain more concepts and move on the rest of the teaching material without trying to overcomplicate things and make them worse

@purandarparitosh

5 жыл бұрын

ROFLMAO

@sabhavathsanthoshkumarsant3382

5 жыл бұрын

vungo

@MuhammadPakistani

5 жыл бұрын

so true

@SivaKumar-me9hu

4 жыл бұрын

It's your prob. You have had nit paid attention when your professor was teaching. Don't blame him.

I wish if it would have been possible to earn a degree without paying fees to colleges uselessly then I would have done it with the help of his videos. Truly wonderful explanation. 🙂 Thank you sir

@tz9976

3 жыл бұрын

Same here... I have to pay 2000 € every six month just because I want to study besides my job.

@salmanfaizi7290

2 жыл бұрын

Bro your right 🥲👍

Thank you for all these videos. Helped me understand the topics covered really well. Keep up the good work.

I couldn't find such a great explanation of this in my book.. thank you !

@deepakkaramsetty7091

3 жыл бұрын

😃😃

@brd8764

Жыл бұрын

agrawal.

This is a very great explanation. Thank you very much.

is parity should kept only at LSB position or can we at MSB position?

Thanks a lot. I love watching your videos. Keep up the good work bro.

Thank you for this wonderful tutorial.

Thank you very much for the videos But i have a doubt here What if the noise changes that parity bit?

You explained it perfectly. Thanks a lot :)

7years ago video is still helping indian engineers 😂😂 that means nothing has changed in the syllabus of our engineering....🥲SALUTE 😂🥲 But bro you are doing the great work,we appreciate your hard work 👍 keep up the great work 👍😀....

@nimeshsingh6229

2 жыл бұрын

Mera desh Badal rha h aage bdh rha hai 😂

@krishtheindian

2 жыл бұрын

It also shows teachers have not improved a "bit"

What if the party bit gets changed due to noise during transmission?

Thanks to Neso academy I finally understood what this is 😊👍🏾

I felt a bit frustrated when i got confused with th odd parity and even parity thing , but when i watched the video again it gave me a lot more clear view , thank you sir .

THANK YOU SIR. very helpful. sending much love and respect from Malaysia 🤍

Thanks Neso Academy. Now it is crystal clear.

well explained !! thank u so much !!

Thank you so much how should we know when to use even parity or odd parity??

Thank u sir for such a great video .....I had a confusion bw odd and even parity ...Now got clarified sir.

Thank you.. Very clear explanation on parity concept

Please note: Parity bit is added at the MSB position and not at LSB

@Emperor723

11 ай бұрын

thanks for telling buddy

u r really awesome Teacher,,,,i really get u.....i dont even understand a word said by our uni teacher ,,,,THANKS

Nice explanation sir!.. your lectures are very easy to understand for us😁 👍

Thank you for the Lecture

thanks you lectures are really very helpful

nicely explained...

Thank you so much sir for ur clear explanation than my DSD faculty 🙏

We add parity bit on which side of original bit number Left or right?

Very helpful!! Thanks a lot

Love You Sir ❤️💕💕❤️! Your way of teaching is too Great ....May You Live long dear Sir ! Ameen ♥️😊😊😊😊

@akhileshgandotra8881

11 ай бұрын

same feelings.

you are a life saver thank you so much

thnx its very helpful

all of ur videos in digital elec i have watched till now are very good, finally subscribed to ur channel

How can we determine the original data bit though it satisfies the even /odd parity concepts. And one more question regarding why a parity bit can't change by noise during transmission

@ayushkumarmehta5336

2 жыл бұрын

Yaa, my doubt is also same. What if original message remains unaltered and parity bit itself got changed during the transmission?

thanks for the explanation i think it would be helpful

Tnks for video sir, your video is most helpful for me.

You're amazing man, thanks, it really helped me understand some of detecting error - methods in networks!

Explained best... Thanks alot

Published : 18/10/2014 Saving life : 12/2/2021

amazing explanation

Sir what if 2 signals got changed at a time due to noise? In this case parity method fails. Is there any another method for noise detection in this case?

Sir,What happens if parity bit changes due to distortion? How the bits 0 and 1s are transmitted through wire( channel)?

Great explanation!

Best tutorial of on KZread still I have

Thank you sir... u are great

Thank you so much

A really good explanation!

what if in even parity two bits get changed at the same time due to noise

@rj-nj3uk

6 жыл бұрын

Yash Gupta then there are errors in two bits but parity checks only for error in one bit.

@yagzyalcntas553

6 жыл бұрын

red cat but if 3 bits are changed parity bit will detect the error so can parity check multiple bits too?

@ArunKumar-bi1fd

4 жыл бұрын

Parity can detect when only 1 bit have changed or distructed

Its very helpful for me, thanks

sir please upload MEMORY DEVICES(rom, prom, ram &pram) lecture.

thankyou !!! this is very helpful :)

Thanks , it helped a lot!

thank you for this essential

Thank you so much very good explain

.thanks for these helpful videos

Sir can we have the lectures for communication system of digital + analog part

In the end you have explained that the receiver knows that whether even or odd bit method was used. But lets say due to noise {0100-1} became {0101-1}. Now as you said the receiver would know this is invalid as there are even number of ones, but how does it confirm that it was not {1101-1} and {0100-1} specifically

great video. thanks.

can u upload videos on binary addition aand solving procedure for overflow

As a student who studies the night of exam you save ma bootae

Thank you sir

How to decide the number of parity bits in a given no. of information bits?

Thank you 🙏🏽

Very good video. Thanks

Thank You!

The best explanation 😍

WELL EXPLAINED

Are there any videos on negative and positive clippers ?

is it important to add the control bit at the beginning of message or end is necessary?

Great job👍

Thank you

Thanks for that, fantastic explanation :)

@gayathriuma2302

6 жыл бұрын

how to do parity error correction for 11 bit

so nice explaination

Well a good Video explaining the Parity! Thank You! I just have a doubt... In Error Detection, you said if a bit is changed because of noise, the parity bit can be used to identify that the signal recieved is faulty. But However, lets say 2 bits are changed due to noise and the Even parity is Maintained?, How can we know that the signal is faulty?

@masbro1901

8 жыл бұрын

+Nanda Gopalan thats what i mean about parity can NOT check if there's 2 bit or even bit (2,4,6,8) changed and vice versa (3,5,7,9) the sender sent even parity - lets say there's a noise and it changed 4 bit, and the result is still even parity right ? so again the parity can NOT check if there's more than 1 bit is changed, am i right or wrong. @Neso Academy

@virajlathigara3697

8 жыл бұрын

+Nanda Gopalan yes ,it only can detect error having change in only 1 bit.

this helped .. thanks :-)

nice explanation

Wow thank you so much

Sir, do we need to give weightage to parity digit in bcd codes??

Can you tell me which type of parity you are using ?

Well explained

What if the parity bit gets changed during signal transmission?

What if the parity bit changes due to noise & that is the only bit to be changed? It will still show error but actually there is no error in the data bits.

Confused as to whether parity should be added at MSB or LSB?

thank you soo much

Can u please include the lesson serial in the title or description of the video

it helped me for viva 😀😀😀😀

@brucewayne1636

5 жыл бұрын

😅

Thanks you are amazing

Brilliant!!

when the set of input data to an even parity generator is 0111, the output will be? shouldn't it be 1 to make the total number of 1s zero? but the answer is 0. why?

How does the Rx know if the original signal was intended to be positive or odd?

Bro, what if the parity bit itself got changed? Why don't we just say the total 1's of a signal as odd or even without using parity? How can we know the error is on a single bit or in two bits? Is the parity bit always added as MSB or LSB? What can be used to detect errors with more than 1 bit?

good job thanks

what if the parity bit gets changed while the transmission of signal??

@omahll

5 жыл бұрын

change the extra bit and see the result. Its detects the error in the same way as explained in the video.

Thx sir it's very helpful to me ❤️👍👍🌈

Thanq so much

You are the best!

This was good .....

Sir can u plz tell me which parity bit is used in mobile phone and why?

it wasnice explanation. can you explain similarly for a (6,3) code word?

i had a doubt in the end sir explained that if one bit is accidentally changed, receiver will detect error due to even parity, but what if 2 bits got changed accidentally and according to parity also ans will seem correct?? can sir or someone tell me if anyone knows please?