Great video, and thanks for the shout-out! It's great to see someone putting real effort into improving online teaching and learning. You are a leader in the new world of online education. I look forward to watching your future videos (I love the foam panels falling! - hilarious!).

@ChemistryinaNutshell

2 жыл бұрын

Any time! The foam panels actually fell on their own. That was pure luck.

In 2020, I found you channel and lightboards intrigued me. I then went to the ministry of education here and pitched about this revolutionary device ;)... they were amazed with it and they gave me a sweet contract to record the entire state's K-12 video lessons in this format. You helped me a lot. So thanks:)

@ChemistryinaNutshell

2 жыл бұрын

That's awesome! I'm happy to hear that this is being used!

You did earn it! 👏👏👏👏👏

It's really noticeable how much better your speech is since the video a year ago.

@ChemistryinaNutshell

Жыл бұрын

Thank you! Like many people who got thrown into online teaching unexpectedly, it took time for me to figure out some details.

Awesome setup and shared experience, thanks, wish you all the best :)

@ChemistryinaNutshell

2 жыл бұрын

Thank you!👍 Making a lightboard is one possible way to reuse some of these Plexiglas pandemic barriers once COVID is over.

This is a great tutorial on the subject. Thank you so much. Much appreciated

@ChemistryinaNutshell

2 жыл бұрын

I'm glad it was helpful!

Thank you for sharing!!

@ChemistryinaNutshell

2 жыл бұрын

Thanks for watching!

Thanks for the resourceful video. :)

@ChemistryinaNutshell

2 жыл бұрын

My pleasure!

Thanks for sharing!

@ChemistryinaNutshell

11 ай бұрын

You're welcome!

Excellent video, with lot of valuable information. Thanks a ton.

@ChemistryinaNutshell

3 ай бұрын

You're welcome! I'm glad it was helpful!

Very thorough explanation - great technique!

@ChemistryinaNutshell

3 ай бұрын

Thanks!

One word : Underrated

@ChemistryinaNutshell

2 жыл бұрын

Thanks!

Thank you for sharing your experiences and tips! Greatly appreciated.

@dennisvideosvoorinholland792

2 жыл бұрын

Can I ask you what microphone (lavalier) brand and type you are using? It sounds quite clear!

@ChemistryinaNutshell

2 жыл бұрын

You're welcome! I'm glad you found it helpful!

@ChemistryinaNutshell

2 жыл бұрын

If you watch my first few videos, there's an annoying, high-pitched buzzing in the background. I use Audacity's "noise reduction" feature to edit it out of more recent videos. Just know that it only sounds decent after that. I'm using the cheapest lapel microphone that money can buy: www.amazon.com/gp/product/B07PTPMGFH/?&_encoding=UTF8&tag=chemnut-20&linkCode=ur2&linkId=fd1c8495c597ce252f4508a04b662a71&camp=1789&creative=9325

You are one incredibly awesome human being! Much love and respect for all of your hard work, dedication, your talent in putting these amazing videos together about lightboards. They have helped me incredibly as I had been searching for a solution to better convey my teaching content. Thank you so much! Bless you! ❤️👍💪

@ChemistryinaNutshell

Жыл бұрын

I'm glad I could help!

@TheElevenBravo

Жыл бұрын

@@ChemistryinaNutshell Immensely!

Hoping to build my own lightboard soon thanks to your excellent tutorials , thank you . Nice jacket btw very 80's Miami Viceee !

@ChemistryinaNutshell

2 жыл бұрын

That's awesome to hear. Let me know how your lightboard turns out! The jacket was curtesy of my local thrift store. I think you just gave me my next Halloween costume idea. :-)

Thanks alot again for these new tips for improving this technique. I really loved this video. I wish I loved chemistry too, hahahaha, I only liked it on elementary/secondary school, but in university, it was just to difficult for me to understand it.

@ChemistryinaNutshell

Жыл бұрын

Yeah, chemistry takes more time to understand than is available in a semester, quarter, etc. I swear it's fun eventually. 🤣

fascinating!

@ChemistryinaNutshell

Жыл бұрын

Thank you!

Great videos! I am a video professional at Southern Illinois University and we are looking at setting up something like this. You provide excellent instruction with good humor. Thank you for taking the time to do this. I know it takes a lot of work.

@ChemistryinaNutshell

Жыл бұрын

I'm glad to be of help!

Dear Teacher, thank you for teaching how to set up and use a lightboard. Just a few questions, if you don't mind answering: > What size would you recommend for the board? I'm considering something like 120cm x 90cm (~45" x ~36"). > What should be the minimal thickness to ensure rigidity? Alternatively, how think is the acrylic panel you use? > How did you fix the LED strip around the board? E.g., duct tape or something else? Thank you very much! All the best!

@ChemistryinaNutshell

9 ай бұрын

Thanks for your questions! (1) 120cm x 90cm should be fine. It's the larger ones that have trouble because light might not make it all the way to the center. (2) Mine is 0.1" (0.254 cm). It works but it wobbles a lot. I would probably have gone thicker if I had known in advance. (3) Masking tape worked for me.

Thank you for the useful hints, especially about the polarizing filter. Amazing that you used so many of those dry erase markers. Maybe you could delve into your chemistry knowledge and find an ink that would do the same thing and market it. I've been making ink out of walnut husks and rusty nails, but I find that it fades after a day or two. Then again, I am not a chemistry boffin. I've got an old glass table that I plan to try to turn into a diy lightboard like yours.

@johnedwardtaylor

2 жыл бұрын

Let me add that from my point of view, the picture is better the more light you use. In your before and after comparison shot, I see no problem with glare or reflection, and your "normal" shots seem too dark and most of you is not visible.

@ChemistryinaNutshell

2 жыл бұрын

Thanks for your kind comments and please let me know how your board turns out. I did end up buying brighter lights to illuminate me from the sides. They were used for the first time in my Newman Projection videos (kzread.info/dash/bejne/gWGistSfiZq9nbw.html ), but I'm still trying to figure out the best positions for them. I'm learning as I go.

Thanks, im from Chile. Voy a construir también mi pizarra siguiendo tus consejos

@ChemistryinaNutshell

Жыл бұрын

Best of luck! Let me know how your board turns out!

Groooooßes Dankeschön 🙏🏻👋⚘

@ChemistryinaNutshell

2 жыл бұрын

Gern geschehen!

@finelinerin

2 жыл бұрын

@@ChemistryinaNutshell 😄👋

thank you. great insights. i wonder, how did your style of teaching change when using the lightboard, what tends to be drawn, what gets overlayed from powepoint, what stays on your audio explanation?

@ChemistryinaNutshell

2 жыл бұрын

When I teach in-person, I use the chalkboard a lot, so my teaching style didn't change significantly. I typically draw molecular structures and write out chemical reactions so that students can see every detail. The PowerPoints usually show (1) prepared example problems to give students something to work on when I need a minute to erase my board and (2) figures and tables from the textbook that would be impractical to write out.

Awesome video. Thank do much. Would like to know what size board you used

@ChemistryinaNutshell

Жыл бұрын

Thank you! My board is 3 ft x 6 ft x 0.1 in (91 cm x 183 cm x 2.54 mm). This is different than the aspect ratio of my camera, so I can only use about 3 ft x 5 ft of it.

I love both of your videos! Thank you for making them! I am trying to make my own light board and built a wooden frame similar to yours just smaller and I have a question. How do you keep your plexiglass from moving when you write on it?

@ChemistryinaNutshell

2 жыл бұрын

No problem! I'm glad they're helpful. I don't have the best answer to your question because my Plexiglas flexes when I write on it, too. It was annoying at first, but I got used to it and don't notice it anymore. Attaching it to the wooden frame in more locations helped.

@natalieatkison1652

2 жыл бұрын

@@ChemistryinaNutshell Thank you!!

@ChemistryinaNutshell

2 жыл бұрын

@@natalieatkison1652 You're welcome. How did it turn out other than the Plexiglas flexing?

Tape is not recommended to stick styrofoam board to anything. Use thick and strong double sided tape. It won't come loose. Trust me on this.

@ChemistryinaNutshell

2 жыл бұрын

Thanks. I did eventually get it to stick, but ultimately bought brighter lights to illuminate myself because reflecting more light on me just wasn't enough.

I enjoyed your video. Thank you for sharing.... I do wonder about the expo neon dry erase markers. As you write with them they are releasing a fume into the air which you are breathing into your body. And the body then has to deal with the chemicals and hopefully biotransform and excretes.. I wonder in what way that could be a detriment to your heath over the long term.

@mikegarner1602

2 жыл бұрын

Typo... Health, not heath.

@ChemistryinaNutshell

2 жыл бұрын

Great question. I don't notice any smell and there's a lot less dust than normal / non-neon dry erase markers, but the chemist in my knows better than to rely on my senses! Let me introduce you to Safety Data Sheets, formerly called Material Safety Data Sheets. They're documents that contain information about potential hazards: sds.staples.com/msds/1910450.pdf

Can you make one more video which explain how to set up light board .....

@ChemistryinaNutshell

2 жыл бұрын

Are you looking for this video? kzread.info/dash/bejne/nYx-15hmZNidhbw.html

@medisettisivakumar2899

2 жыл бұрын

I saw mam. Can you guide me mam. Actually i motivated by this video. But practically , i can't get the same output.

@ChemistryinaNutshell

2 жыл бұрын

I replied to your other comment. Thanks!

Hi. I’ve created my lightboard, did one test, cleaned it and now it’s just smeared white and impossible to use. I’ve tried everything to clean it but it’s just white and smeared. I’ve used window cleaner, fairy, water, I don’t know what to do. Any ideas?

@ChemistryinaNutshell

2 жыл бұрын

Hi, Sam. I'm sorry to hear that this is happening. First off, if you try anything else, I highly recommend trying on an out-of-the-way corner or edge. I'd like to help if I can. What material is your board? (Acrylic, glass, etc?) What markers are you using specifically?

@ChemistryinaNutshell

2 жыл бұрын

Another thought crossed my mind regarding the Fairy dish soap: At a school where I used to teach a well-meaning person once washed the (white) dry erase board very well wish dish soap. It looked spectacular. At the start of class everything seamed normal. I filled up the board with text and went to erase and it just smeared everywhere. It would not erase. The fix for that day involved using loads of water to get every molecule of dish soap off of the board. If I got worse after dish soap, the fix likely involves water, window cleaners, and lots of towels to keep scrubbing.

@samhylandmarketing

2 жыл бұрын

@@ChemistryinaNutshell Thank you. I just made a video to show you the situation. kzread.info/dash/bejne/a5prs5mkgq-4epc.html

@samhylandmarketing

2 жыл бұрын

@@ChemistryinaNutshell I wrote a reply with the link to my video, explaining the problem. I guess it’s been hold as spam because it contains a url

@ChemistryinaNutshell

2 жыл бұрын

@@samhylandmarketing Sorry about that. Feel free to email me at the email address in my about page listed as "for business inquiries." I put my comment spam settings to the max due to some problems I've been having with commenters leaving links to unsavory sites whenever I post a new video.

Hi mam. Your videos are awesome. I am a math teacher. I also want to produce same kind of quality vedios. But I am unable to make this kind of light board. I saw your which you explained about light board. It's not working like that. Could you help me in that aspect.

@ChemistryinaNutshell

2 жыл бұрын

Hello. What specific problems are you facing?

@medisettisivakumar2899

2 жыл бұрын

1. Written text not visible. I used florocent marker to write on board. 2. Back drop also visible brightly which spoils complete purpose of it

@ChemistryinaNutshell

2 жыл бұрын

1) You want to make sure that you're using either acrylic glass or normal glass. If your board is polycarbonate, it will look a lot like acrylic, but have different optical properties and the text will always be dark. 2) You might need to play around with the lighting brightness and angles a bit. The lights that illuminate me are pointed directly at me and not hitting the backdrop. I also have the camera exposure set so that the backdrop looks dark. Let me know if that helps!

Dimensions of the board please 😊?

@ChemistryinaNutshell

Жыл бұрын

My acrylic glass is 91cm x 137cm x 0.25cm (36in x 54in x 0.1in). If I had to start all over again I would have started with something thicker because it flexes when I write on it, but it works.