“This is Richard back at ya” best line of every video

@noname-oe9jy

2 жыл бұрын

*back atcha

@philipgrubbs9757

2 жыл бұрын

Absolutely!!!

@Flowtester1

2 жыл бұрын

I like when he says its wore plum out and he always says pretty simple.

Lol. I can hear every word he says but I’ve spent so many years around shops I’m acustom to it

Thank you for another video! I still love them, even after watching them all. 😂

I found you on here to make my 4L60E Corvette transmission the best as it could be. You are the best I have seen.

Been watching y'all for quite a while. LOVE YOUR VIDEOS.. Keep up the good work.. And don't worry Mrs Teresa, I can still hear Richard even with the air gun running.. 🙂🙂🙂

Love watching your videos from Saskatchewan Canada 🤘

I had a line pop off near the radiator hauling about 7000 pounds of food equipment up a mountain grade in Arizona, it was about midnight, 30 miles from the nearest town. We got the line back on but not enough fluid left to move. I wanted to at least get off the road. We decided the tranny might be smoked anyway so we decided to put some fryer oil in the transmission, maybe enough to get it to move. It worked and we drove it all the way to town. topped it off with fluid at a circle K, drove it 200 miles back home thinking the whole way we were going to be broke down after our festival. That transmission lasted until 210,000 miles, went 2 more years with that fryer oil in it. It was a Ford 4R75w.

@tombeauchamp806

2 жыл бұрын

That's nuts

@nerd1000ify

2 жыл бұрын

Vegetable oils are actually great lubricants. Only problem is that when they get hot they tend to sludge up really bad.

@gabegarcia7779

5 ай бұрын

Damn so your saying it popped off smoked out and went neutral and you just put fluid back in it and it worked?

Hi Miss Teresa and Richard, The garbage that do harm to Dogs should get life in prison and HARD labor I mean HARD labor!! And not just Dogs, any animal PERIOD!!!

Richard is amazing

This is Richard back at cha We don't mind the drippin

I always change over to pushlock fittings and cooler hose,no problems

Nice video as always :)

That's why I miss the old screw in cooler line fittings. Yea you do have to worry about people rounding the fittings off cause they don't know what a line wrench is for or how to use a backup wrench on the case fitting

Ms. Teresa, We can hear !!

I’ve had my lines pop off at the transmission twice, the top line to be exact, it wasn’t until after the 2nd time I realized the round plastic snap on ring that secures the metal clip was never installed, after that I ordered 2 of those plastic disc rings and haven’t had any issues since……..knock on wood……..What would make that line pop anyway, I noticed when it would happen I would be on the freeway going at an excessive rate of speed!!! Luckily both times I was able to coast it off of the exit and into my driveway after noticing the cloud of smoke following me……

God bless you & your shop, but I have yet to see a Toyota or Honda transmission on the bench. That's because the Japanese don't build garbage like GM and Dodge. I'd send the CEO's Thank You cards every holiday season for keeping me in business.

This happened to my suburban a few days ago. Except it was the bottom line. Seems to doing OK now though.

You said scotch brite marks hold oil, so the accumulator piston slides easily. Is there a certain direction the the marks should be? Like cross hatching on a cylinder?

You guys should do a 6r80 teardown video

My buddy's trailblazer blew the cooler line he shut it off as soon as he noticed no issues for a couple weeks after fixing them started having shifting issues when cold

Check for some new snap ring remover tools toward the end of this week via FedEx. No magnet on these orange ones.

I had a bird that made that same noise and another that sounded like a faucet dripping. Great party birds.

cut down on the coffee

@Garth2011

2 жыл бұрын

Its a genetic thing...can't do anything about it.

That happen to me. Even caught fire but I was able to put it out.

Thank s

I’m a ford sr master do u guys do any 6r80s, 10r80s or any fwd tranaxles

Should the lines be have nuts on them to not come off?

Watching this video, got me thinking about a couple of things- What is the difference between a Corvette servo and a regular servo? I've never heard or seen any explanation of the differences. Now, the microphone that Richard wears, is there any audio settings that can be tweaked? Everytime the air impact gun runs, the audio level drops for a few seconds, then comes back up. I've missed a few things that are said everytime the audio level drops. I noticed that the electric tools don't trigger the audio level drop, since they're quieter than the air tools. Also, that's a good tip about retaining the clips if the plastic cover is missing.

@LightfeatherxX

2 жыл бұрын

The corvette servo is the second gear servo that was OEM in the Corvettes, hence the name. The apply area of the corvette second gear servo is significantly larger than the other OE GM second servos by ~35% if I remember correctly. Swapping in a Corvette servo thus generally, based on transmission condition and other upgrades or tunes, decreases first to second shift time and increases the firmness of the shift. This increases 2-4 band life considerably, and there's not really any downsides to doing it. Also because the 2-4 servo is on the side of the case, it's an upgrade that can be done with the transmission still in the vehicle, although depending on which vehicle, the clearance may be tight.

@geesss8675

2 жыл бұрын

Have you been a tool your entire existence

We had a dodge come in for this same thing I dropped the pan and it had a cup of atf in it

I have the same problem on an 08 f150. When you say “drains fast” enough to not cause damage, how fast exactly is that?

Had a line pop off on one of my old trucks it was a 04 gmc half ton put the line back on and filled with fluid worked good for another month before the trans let loose at 75 on the highway

@BigEvan96

Жыл бұрын

What do you mean let loose?

Stupid question. Could a leak in the radiator where the cooler is let antifreeze into the tranny? And if so what kind of time do I have before I'm walking everywhere? It's having these fits of sticking in 3rd gear.

I can see " pretty simple" on a precision trans t- shirt!

Is there a reason why the transmission line popped off

Did I miss something? Where'd the milwaukee electric stuff go? I do love the sound of the air tools tho

@shaunvalencia2644

2 жыл бұрын

They made a video a couple months ago maybe saying they wouldn’t be using them anymore, forget the reason but wanna say it was something along the lines of quality, or lack there of. But the video I just watched last night showed Milwaukee cordless so I’m not too sure anymore.

@tombeauchamp806

2 жыл бұрын

There was some drama a few months back when they were trying to get sponsored by them or something and didn't say a word about it. Always behind the scenes drama with them red tools

So when the work starts running out, then you answer the phone?

@kdlittlehawk

2 жыл бұрын

LOL..right???

What do parts machines use as a cleaning liquid? Is if a type of brake cleaner type liquid or just water? Or distilled water!

@PWgadgets

2 жыл бұрын

I don't know how you went from a solvent to purified water???? Spray wash cabinets use a mild alkaline soap mixed with water with added corrosion inhibitors, parts washers generally use mineral spirits.

monster of rebuilding transmission...

You always say that the noise from the oil drain is obnoxious, but I have never heard it. I can however hear you over the gun because the gun only runs for a very short duration.

Not sure why people would drop it off and leave. I'd at least offer to help out, whether be removing or installing some transmissions or simply sweeping the shop or holding the camera 😅🤷‍♂️

What, color scotch bright, do you use?

@leebarnes655

2 жыл бұрын

Green

What happened to the Milwaukee driver's ? Is there a reason you don't use them anymore?

@xSTH1TMANx

2 жыл бұрын

I noticed the same thing

@bcar1ify

2 жыл бұрын

Maybe no $$$$$

Yessiree. Maybe the best solution for the later models vehicles is to remove all of those quick connects and install a real connection with threads !

How does that work with these computer controlled tranny's?congrats on rescuing Annie.tgat is very cool to hear you and the wife did that too.my dog is a rescue too.

Ruined a 47re when a line burst after rubbing on the front cross member for God only knows how long

What happened to cordless tools :) Back to air tools ? Love your video's

@kdlittlehawk

2 жыл бұрын

ol' skool. I'm the same.

what happened to yall? does anybody know??

What happened to the cordless tools, I miss them because they don't send the mic amp into a tizzy and reduce the input gain like the air tools do.

I’ve been trying to contact them and get some information on having them rebuild my 48RE.Still haven’t heard from them.

@pureblood8427

2 жыл бұрын

Good Luck I have been calling Monday through Friday for months and no answer. No answer on facebook or on here.

@kdlittlehawk

2 жыл бұрын

@@pureblood8427 they don't comment here or answer phones or return calls, kinda sucks.

@uglymechanics6599

2 жыл бұрын

@@kdlittlehawk They're probably busy building trannys lol

@chrisbetter9806

2 жыл бұрын

Yeah, I bet you would have a better chance at winning the lotto than actually getting in they're shop. Too busy already.

@kdlittlehawk

2 жыл бұрын

@@chrisbetter9806 yeah, they should at least answer their phones

Not using the Milwaukee ?

@kdlittlehawk

2 жыл бұрын

electric is junk, not as much power as air tools and the electrics burn up. Why spend more money on "what's new and cool" when you have good old air tools?

Hey rich whatcha drinking?

@PrecisionTransmission

2 жыл бұрын

This is Trent and my pops loves his Coca-Cola

@tjlovesrachel

2 жыл бұрын

@@PrecisionTransmission hey Trent … thanks for the response… I was thinking it was that but maybe it was something else… and come in a can is way better than the bottle for some reason

@Garth2011

2 жыл бұрын

@@PrecisionTransmission We do too...king of soda's but we'd prefer if they'd bring back the glass bottled version in the original size, I believe 10 oz.

I wish whoever is videotaping would wear a MIC because you can barely hear what they’re saying. Plus they ask good questions sometimes especially Teresa.

why cant richard smell?

@chrisbetter9806

2 жыл бұрын

Think he had covid

@kdlittlehawk

2 жыл бұрын

his nose is so used to the smell.

Richard Matco green mini screw drivers PPG3K

@chuckmiller5763

2 жыл бұрын

Thats the prybar set.

@reddog376

2 жыл бұрын

@@chuckmiller5763 yes it is. I seen them on another video.

@Garth2011

2 жыл бұрын

Well over priced too.

@chuckmiller5763

2 жыл бұрын

@@Garth2011 Yep, considering they are not made by Matco either. 95% of Matco is rebranded. They only make boes now I think.

@Garth2011

2 жыл бұрын

@@chuckmiller5763 $9 for three of them on Amazon. All the same with a 45 bend at the end. Good enough for their use. Mac tools is better.

Please turn the mic up when talking.