quick question is it advisable to use modules or Soc?

@chipindetail

2 жыл бұрын

Please go with the module, if you are building an actual product, as it is pre-certified. If you use a soc on commercial product you have to pay for getting certified and then only you can release. If its for project you can use SOC no issue.

@muigaisimon4103

2 жыл бұрын

@@chipindetail thank you sooooooooo much

@muigaisimon4103

2 жыл бұрын

@@chipindetail QUICK last question.....very basic but i can't find a satisfactory answer ...in my design do i really need an external 40Hz oscillator ?...i followed the design pdf and it suggest it's compulsory but looking at a few breakout boards online it seems most of them didn't incorporate it... what's your take on this

@techindetail

2 жыл бұрын

@@muigaisimon4103 Hi it's Mandatory. The reason you may not have seen that is because in most cases it's housed inside the module silver enclosure.

@muigaisimon4103

2 жыл бұрын

@@techindetail thanks for your help this my first project working with esp32

Dude! You hit the gold star quality in terms of info dump.... I've been scratching my head about where to go from the 8266 and WROOM32 and your 5 minutes SUPER SUMMARY and EXECUTIVE OVERVIEW of Espressif's latest models has saved me HOURS of pondering... Thx from Japan!!!!!

Worth mentioning that ESP32-C6 now supports 802.15.4 / Zigbee/ Thread / Matter.

Thanks and that helped shed light on the “confusing” range of Espressif chips.

You're the man! It's hard to keep up and you thought me a ton about the esp32-s3 in perticular

Short, sweet and to the point. Informative.

Great overview. I've been a fan of the esp family. The XIAO esp32c3 is my favorite goto to replace my 8266 sensors. I like the deep sleep and interrupt capabilities. It's perfect for battery/solar sensors.

At 2:35 the wifi slide you show is for 6ghz / 6E wifi. The C6 supports 2.4ghz wifi 6, not 6E (6ghz)

amazing clarity bro thanks!

Great video. Very informative.

Hey im new to this stuff, just wanna ask, if i want to use one of the esp32 board as an hid, i should use esp32 s3? Thanks and great video btw

Very good summary!

Very helpful, thank you

How does the ESP32-C2 fit into this lineup?

Thank you!

great comparison

How does the ESP32-D0WDQ6 fit into this lineup?

Very useful video. Many thanks.

very nice guide.

great video about that topic 👍

Sir, can you please make a video on SPIFFS and how to access flash memory of ESP8266?

Can you discuss esp32 wrover series?

Justo el vídeo que necesitaba

Very helpful!!! Thank you !! Subscribed.

@chipindetail

Жыл бұрын

Thanks

That was great. Thank you.

@chipindetail

Жыл бұрын

Glad you enjoyed it!

Thank you

Excellent..!

Can ESP32-S3 devkit used for matter PoC?

Thanks... it's working... Good Job...!

@chipindetail

Жыл бұрын

Welcome 👍

Excellent video.

@chipindetail

2 жыл бұрын

Appreciate that you found this useful

Informative, thank you

@chipindetail

2 жыл бұрын

Thanks

Nice video, thanks :)

The Mini is small enough for me to put it on a 34 mm round main board.

Your English is excellent from an American. Very clear and easy to understand even at 2x speed. The S2 isn’t a drop in replacement for the ESP32, it’s only single core.

@djvenom9582

8 ай бұрын

Couldn't understand this freaking accent at all!

@RND-USA

6 ай бұрын

@@djvenom9582poor thing, you must be slow then. I could understand him easily at x2 speed and I’m not some mega-genius.

@georgegu3374

3 ай бұрын

@@djvenom9582 if you cant cope with accent, you should probably stay away from youtube. it's international media dude.

@____________________________.x

19 күн бұрын

x2 gang checking in 🧐

i just kinda randomly chose the s3 when buying an electronics starter kit. Rasberry pi?, arduino?.. nope… i chose.. the esp32 s3. Whatever that is 🤦🏼😂😂 Thank you!.. Can the s3 do everything all the others do?. was that the correct interpretation?.. or just better than s3 (but much to different to compare to C and H models)?

I like the Dual (LX6) Core feature of the S-Series.. but haven't seen any tutorial/guides on how to develop/debug a dual-processor application . Speaking of debugging, when you plug in a C3 or C6 board, does the Risc-V's USB peripheral instantiate as a COM port, or as a JTAG/SWD debugger, or both? (I'd like to buy an ESP32-C3 board, but not sure if I would also need a special debugger adapter to step thru the code (ex. Segger), and/or a USB to serial cable (ex. FTDI) for general print/logging?

@PyroSAJ

2 жыл бұрын

ESP-IDF lets you pin tasks to a specific core, or can automatically select a core that is running a lower priority task.

great!

@chipindetail

Жыл бұрын

Thanks

Good information, just put the CC on if you can't understand his English.

Can you do a video on the ESP32 models that support USB OTG?

@chipindetail

2 жыл бұрын

I will make it. Added to my list of topic. Though have to get access to an OTG supported one.

@adamkoxxl

2 жыл бұрын

S2 and S3

Which ESP32 is “best” for best camera, movement sensor, proper battery?, MICROSDXC card, WiFi antena, ? 1best security camera with notices/saved pictures. 2 best capture small birds / animals feeding with WiFi,antena,notices Esp32wroom s3? Best picture and processor both uses? Most humbled! Website to order all parts!

Hi! I'm looking forward to getting an esp32-s3 model, but i still wonder if there's already a way to program it with the arduino IDE or with PlatformIO but i cant find any info about it. Can you please help me? Also, i know some of the new S3 modules like the ESP32-S3-WROOM-2-N16R8V work with a 1.8v spi voltage. Do you know if that affects you when trying to communicate with other modules made for arduino? (like all the existing modules for wifi, ethernet, bluethoot, etc)

@chipindetail

2 жыл бұрын

Can I kindly get back to you in 24 hours.

@davidydrake

2 жыл бұрын

@@chipindetail yes, please!

@chipindetail

2 жыл бұрын

@@davidydrake The S3 support on arduino ide is still in progress: github.com/espressif/arduino-esp32/issues/5594 . Maybe in 1-2 months it will be fully supported. As of now you need to code in ESP IDF only. There is a workaround if you use ESP Rainmaker library which supports arduino IDE but for selected use cases on S3 . Please check it out. I have a video on this on my channel name Make an ESP32 Alexa Switch in 5 minutes. Regarding second question, I am not well experineced to guide you. But always there should be voltage compatibility

@skhumbuzocele1330

2 жыл бұрын

Does ESP32-C3, Or and ESP32-S2 support Arduino IDE programming?

@chipindetail

2 жыл бұрын

@@skhumbuzocele1330 C3 and S2 Supports. But others dont

Doee not have 6 ghz wifi. Not even 5 ghz... Incorrect info

wish the S3 could do wifi 6!

👌🏼🙏🏼

4:33 cat face detection

Bro are you malayali?

@chipindetail

Жыл бұрын

Yes

@claw214

Жыл бұрын

@@chipindetail recognized from the accent😅

This video is almost impossible to interpret.

Sorry I find the Indian accents the hardest to listen to and understand

you need to get someone who actually speaks English do the voice in your channel.

i am just gonna esp32 to hear my voice, use gpt api and send me the answer with a speaker. Tell me the best esp32 for this purpose.

Angrej ki aualad