Man…you’re really good at explaining this stuff, especially for people who use some of this gear a little bit don’t understand it’s full functionality. I never really understood pre/postfaders till now. Thanks a lot 👍

Great info! May you not get tired of sharing your knowledge about the sound system and how things are done properly. Thank you and please continue in your good deed.

I always enjoy and appreciate your videos at the same time. Calm, informative, no bullshit. Thank you.

That great brother 🎉🎉🎉 most likely I used the auxiliary for reverb and delay separating for vocal on analog mixers, but on the digital is totally different ❤❤❤

Always helpful. Thank you.

I run an Aux channel for people on the phone line, and another to Skype/Zoom in the computer, both with MinusMix for their input slider.

Very clear explanation

Awesome videos my friend - thanks a lot.

good stuff man.. thanks

well explained, Kudos sir

Thank you very much!

Great video

Nice!!! Do you have a video on how to connect amps to the mixer using the aux input?

Hi thanks for sharing this tutorial. Very helpful. May I ask, Is there any way that I can convert an aux output into aux input?

Awesome video on using the Aux! Firstly a massive thanks to Kettner Creative, it's thanks to you that I know how to use my MG12XU mixer. One question though, if I wanted to have multiple monitors with different mixes controlled by Aux1 would that be possible, or would I have to use aux2 for a separate mix and be limited to two monitor mixes? Thanks again for all the useful content!

@kettnercreative

2 ай бұрын

You have to use a separate aux for each mix

Very informative. Although I didn't understand how exactly to connect an effects unit (eg, reverb/delay) to my vocalists. I understand the Aux out and the Aux mix control, but how do I get vocals to go to the efx unit and then return?

Hi sir please Yamaha mG12xu full review explain ❤ I'm waiting

Hi, great channel, recently subbed. I purchased the Yamaha MG10XU for a live show that we will be taking on the road. I’m new to the audio mixing space. Your videos on this mixer have been most helpful, thank you. Question - I need to take two line outs from the mixer. One is to send the mix to an Atem Extreme for the livestream. The 2nd line out is to feed a house audio system. What are your recommendations for achieving this? Thanks in advance.

@kettnercreative

2 ай бұрын

I would use a 1/8" TRS to dual 1/4" TS cable (currentprice.io/14_to_dual_18) to go from your stereo outputs into your ATEM. Then send the XLR inputs to the house sound system.

I connected yesterday a Zoom H6 via 1/4” cable on both ends to a mixing board, I connected it to an Aux and my final recording was pretty bad. I could barely hear the instruments and the vocals sounded at a distance. I activated the -20db pad on the Zoom. Those aux outputs were used for headphones, but the sound tech told me that I could use them. I am not sure what happened.

Thanks

@kettnercreative

9 ай бұрын

Thank you so much!

I run my subs through the aux channels for separate volume control when I do that should I leave the aux 1’s pre fade off and on post so that it matches the aux 2 volume

Hi Jordon We have the Yam Mg12Xu and use for vocals and guitar , what is the best way to use so vocals and guitar can have own controls into the monitor so the guitar doesn’t owner power the vocal , we just have the one floor monitor we both share

can i use the aux output for connecting my audio interface

With this mixer You’re saying to run external Effects you have to commit another channel to just effects return (AUX2)?

How to connect aux in djm pioneer 350 for streaming video what I need

Does subwoofer sounds better when fed through Aux send from a Mixer?

I have the Yamaha mg12XU!If I want to run my subwoofers separately and use the aux send,how should I plug my two subwoofers?

This is off subject But I want to know how to connect Dante adapter to my mg 12xu

Wait, how do you use aux send on a Livestream?

Aux Output .. what Kind Needed ? .. Is It MonoTS or Stereo TRS ?

I can’t get a good sound when recording acoustic drum with the mackie profx16v3

yes, where is the return input after you sent the audio through the send output?

@kettnercreative

4 ай бұрын

You can connect it to any input channel on your audio mixer that you want.

@averagepainter

4 ай бұрын

@@kettnercreative i see. But i wont have the "traditional" control over its amount per channel, only for all channels simultaneously?

The aux output is mono. How can you convert it to stereo in order for your earphones to work left and right. ?

@kettnercreative

8 ай бұрын

You would need to use two aux channels if you need stereo.

@hernanreyodiaz222

8 ай бұрын

​@@kettnercreative2 mono ts to stereo trs? Thanks for the reply

What about stereo aux output ? Wouldn’t you have to use both aux one and two? Then you lose pre or post option. Why is it so elusive to find a budget mixer with 16 aux mono / 8 aux stereo outputs for iem mixes.😂 they seem to cost the earth.

@kettnercreative

2 ай бұрын

Most people looking for 8 stereo monitors would have an input list with more than 48 inputs. This would easily put you in the territory of a full scale digital setup.

ein paar beispiele wären gut gewesen

First!

@kettnercreative

9 ай бұрын

Aha, nice.

So Aux the Pre-Fader function means I can have different output besides the Main output? That means I can control the Aux volume separately from the Fader and not effecting the Main output, right?

@kettnercreative

9 ай бұрын

Exactly

Много пустой болтовни....урок ничему не учит.