let me know what you guys think or what you want to see next.

@policeswat64

4 жыл бұрын

An exhaust on that car

@mooch-bd8et

4 жыл бұрын

Exhaust rims, bags, big turbo

@procam448

4 жыл бұрын

😂😂 maybe I have something coming soon

@procam448

4 жыл бұрын

Definitely bags!

@kenziemaund5134

4 жыл бұрын

Litttt

Several months ago I installed K&N CAI on my 2015 Fusion Titanium 2.0. It's definitely worth it, car has a very nice turbo sound and it definitely added a small bump in power/responsiveness. The car should have came with one from the factory.

I finally got my CAI and installed it I've had it on for 2 days and I'm loving every second of. Can't wait to get my bov next.

Thank you for keeping it all very detailed. Excellent video

@procam448

4 жыл бұрын

Thank you

I got this one used for my 2.0. I love it and feel that at 25mph when you punch it and it down shifts the TQ is insanely amazing. Also a 60mph roll and when it down shifts to 3rd the pull to 80 and 4th gear shift is so good. I have 145k on my 14' Fusion and it's so fun. Also eibach lowered with monotube gas shocks, and stress sway bars as well as the jacking rails. Running half of a boomba motor mount because the complete was way too much vibrations. Oh and a TB spacer and intake spacer from boomba.

@koolaidwaterfountainsforth4236

3 жыл бұрын

What did ya think of the boomba spacers when you put them on? Feel a difference with them?? They're next on my list! K&N was a definite improvement on mine all the way around.

@RobertMichaelPhotography

3 жыл бұрын

@@koolaidwaterfountainsforth4236 I thought there was a sizeable improvement down low with the spacers. What's the biggest challenge with the spacers is the added distance from the PCV tube that connects to the main intake pipe. I didn't have a leak but it's stressed the tube and I should have warmed it up with a heat gun to try and take some of the bend out of it to slightly increase the length. Upgraded sway bars really helps with cornering. The jacking rails improve the stability of the body as well. I also love the feel of the gas shocks. Daily drive this car 120 mi a day. It puts the hurt on quite a few other cars and I'm not even tuned.

@koolaidwaterfountainsforth4236

3 жыл бұрын

@@RobertMichaelPhotography heck yeah, good to hear! They're definitely on my list for my '16. Already done the intake, catch can, boomba adjustable bov and the delete for that fed in intake noise. Wanting to do everything I can before I tune it down the road. Little extra performance and get the added mpg gains. I pulled 35mpg on a 140 mile highway trip yesterday 🤘 fwd ofcourse. Even doing the catch can cleaned up the throttle response a bit once it cycled through a handful of dumps.. so having done the catch can already I have no worries about the pcv tube! That's done been in the trash lol

@RobertMichaelPhotography

3 жыл бұрын

@@koolaidwaterfountainsforth4236 pretty sure my car has an issue with the trans since I can't get any better than 28 mpg lately. Lots of bog down between shifts and or slipping. Average daily is 22mpg to 21. I drive 75 -80 tho and love to put the pedal down. I also run E30 not tuned and it loves it, but mpg suffers for sure. But straight 91 is still not good on mpg. 24-25 average, and less performance.

@koolaidwaterfountainsforth4236

3 жыл бұрын

@@RobertMichaelPhotography I just run 93, I kept it at around 77ish. It was going down the mountain so cheating some. My best mpgs I got on the same trip before were just over 33. So gained nearly 2mpg more with a free flowing intake. Catch can made a world of difference with running cleaner. Got a JLT catch can. $150 bucks and it's not this big ass cylinder looking thing. Looks nice nice in the engine bay, people gotta scan for it to find it that arent used to seeing them 😉

Great Video! Hey man just wanted to say tuck those draw strings in side your hoodie. If they get caught in a pulley or something moving. It could strangle you to death. It happen to a friend of mine working on a muscle car. Lucky someone was there to shut the car off. It can happen that quick too. I have a 2017 Ford Escape with the 2.0 turbo and AWD. I put a K+N kit and filter on it. Its sounds alot better. Keep up the great work. What's next exhaust? Shawn.

Add bloopers to all you videos that funny af

@procam448

4 жыл бұрын

👌👌

I just got this car wow it sound better than I thought

Just installed mine on a 2014 fusion Titanium! A dope trick I came across is if you take the sound deadening material off the hood, the turbo is wayyy louder when the hood is closed.

@ironman98

3 жыл бұрын

Ummm.... you're sure that wasn't the firewall protection material that you took off... Right? Might want to leave that on there.

@TheRichgod100

3 жыл бұрын

@@ironman98 it's a sound deadener and insulator that's all. Keeps the engine quiet and helps the hood surface stay cooler. Well worth the sound increase!

@ironman98

3 жыл бұрын

@@TheRichgod100 Hm, interesting. Good to know.

@adriancocos5838

2 жыл бұрын

Put a k&n cold air intake on my '14 fusion 2.0 Ecoboost a year ago. Love the sound with the hood up. Gonna take that deadener out now that I read this.! Well worth the sound as you mentioned!!!! 👍

Solid vid🔥

Honestly, it probably did add a bit of power, but, the main thing you're noticing is those intakes really help with the response of the engine. Helps the turbo spool quicker etc.

@procam448

4 жыл бұрын

Yeah it really does make a difference it actually surprised me how much it does I wasn’t expecting it to do absolutely anything besides just make noise

@williamsinger4124

4 жыл бұрын

@@procam448 that Lil fusion seems to pull pretty well, judging by the speedo needle. Never drove one. Looks like it'd be door handle to door handle with my 80 Buick Regal. Built it to be a fun cruiser, not a race car lol.

@procam448

4 жыл бұрын

Honestly I’m not really gonna put too much money into this car this is my daily The only thing I will end up doing is probably putting it on bags and some wheels but I’m gonna buy another car to actually build

@williamsinger4124

4 жыл бұрын

@@procam448 I'll be watching when that comes. My Regal started life as a 231 (3.8) V6, with a 2.56 open diff. Been a long project and come a long way since. Just have fun with the fusion, and keep it reliable. Everyone needs a reliable daily.

@procam448

4 жыл бұрын

Hell yeahh 👌 and that’s awesome man i know the feeling and yeah definitely will just keep it my daily I will have something different for the channel soon to build but I can’t really drop a lot of money rn with everything that’s going on

On mine I have an Injen Performance one and the piping goes all the way to the Turbo. You can hear the blowoff. Not sure there was as much of a power difference as I saw when I did the CAI on my Hemi Ram.

this is amazing :D

I recently bought a 2017 se that has a 1.5 eco boost. What can I do to add minor performance. Mind you I’ve never done more than change the brakes and oil on my cars. And I’m wanting to learn how to do mods with this

I had a great desire to buy it too. But when I saw that postage and shipment would cost me the same as the product jsem I gave it up

When I had my own BMW E36 (1996 mod) a mechanic told me that the cold air intake I had installed actually decreased my power instead of adding power. It was the 150HP version. Do the cars need to get tuned for the intake, or is it only low power cars that loose power?

Do you think there would be a similar boost in performance on the 2.5l no turbo?

Before you ask yes your car can also use a k&n air filter.

@mr.e3846

Жыл бұрын

Will this work on a 2016 Ford Fusion se ecoboost?

@declanryle6547

Жыл бұрын

it says 2013-2015 ford fusion on the one i got but i have a 2011, will it still work

Trae valvula de alivio o solo el filtro de alto flujo?

How did you get the harness clips off for the air sensor connected to the air box ?

What else did you add

Good video bro

@procam448

4 жыл бұрын

Thank you man definitely give it a thumbs up if you haven’t already really helps!

4:18...So is it because of your engine recycling the freshly deposited plastic shrapnel/debris through the intake the reason it's called "Ecoboost"? Let me know please I got 4 lbs of Legos to feed my machine. Lol

What kind of valve?

Does the blow off valve fit on my 2013 Ford Fusion se 2.5

What part number is your intake because I have a fusion also and what blow off valve do you have?

I think I heard the plastic entering your intake manifold, from the hole you widened out.

@procam448

3 жыл бұрын

😂😂 I cleaned it all out

What blow off valve do you have?

I’ve been looking at putting an intake and BOV on my MKZ 2.0t (basically the same thing) this is the only video I’ve found that has given me an idea of what it will sound like and how the install will go… I am curious about your BOV install if it’s located in the same spot as mine.

@procam448

3 жыл бұрын

Yeah you’ll have to take off the front passenger wheel and look for the stock bov is a cover bolts it’s kind of a pain to get to

@chrishall3510

3 жыл бұрын

@@procam448 yeah, it looks like fun. Thanks for this video. It sealed my decision to buy both. Also looking at a decent tune for throttle response and torque on the low/mid if you have any suggestions

Is that really the iat hole or mass air

Can I put that in my ford fusion se 2018

Can someone link me a video how to do the sensor please

Hypothetically, you could use this to boost fuel economy and save the torque and hp for getting out of tight spots. I'd be interested to know what kind of boost to gas mileage you get by driving conservatively.

@procam448

3 жыл бұрын

It’s about that same it doesn’t really change

In the beginning of the video rite before you gave it a rev,, what did you say that it was called that is a lil more then "stock" sound? Kinda sounds like a turbo wen it blows the air... It sounds real good, but I cudnt hear what u said it was called? Thanks👍

@procam448

4 жыл бұрын

I installed a blow off and thank you 👌

what blow off valve do you have?

Why’s ur engine light on ? Did it do that ?

I just bought a Fusion S, so no EcoBoost, until you get above 4-5 RPMs it sounds almost like an electric motor. Probably the only time I wish that I had gone for one of the turbo engines is when I am first pulling into heavy traffic from a stop. Otherwise, it's not a bad car.

@shiloh9995

2 жыл бұрын

I have a rear muffler delete on my 2013 2.5 SE fusion and I love it to death. I’m putting a k&n air filter in soon. Did the box come with the filter?

@jamesballard6564

Жыл бұрын

Keep in mind those 2.5 units are bulletproof. The money you save with it you can re invest in other areas of the car. Good luck on your mods!

What year is your fusion?

Anything to help with transmission improvement? My 2015 ford fusion titanium once in a while buffers/jerks when trying to pick up speed when making a turn mostly.

@joeljr570

Жыл бұрын

Fluid change and module reset will do the trick

So just dont unplug the battery? Im legit asking

i have a 2010 fushion with the 3.5 V6 24v engine, would this product add more power to it with little to hardly any work to install it. OR would you recommend something completely different to add alittle more power to my car?

@itsl3roy890

Жыл бұрын

easy to install maybe 6-8 hp 8-10 torque minuscule added fuel economy, but bruh why that 3.5 is beast by its self

Would you happen to know what k&n kit you bought I’m seeing a couple diff ones that look similar but I’m not sure

@itsl3roy890

Жыл бұрын

it was a short ram, cold air pipe goes down instead of sitting where factory box was

what bov is that??

What BOV do you have?

Would this filter fit the Mondeo MK4 2.0 petrol? Is it the same size intake? Help a dumbass out please bro, the Mondeo is the same as the fusion, just I have the model before the facelift. Any and all help appreciated, thanks.

Your Ford fusion is turbo?

Sounds very cool. But I prefer a quiet ride. I know, I'm old. 😁

@procam448

3 жыл бұрын

I don’t blame you

@hannaherickson2713

3 жыл бұрын

You would hate my car then 🤣

@LuisRamirez-ln3cj

3 жыл бұрын

@@hannaherickson2713 I still love hearing the roar of a nice American V8 engine...but only for a few seconds.

Extra litttt

@procam448

4 жыл бұрын

😂😂👌

I also put a K&N intake in my fusion (2015 1.5L) and the difference is surprising and worth it. One question; where would you recommend to go to find aftermarket information on fusions?

@procam448

3 жыл бұрын

There’s like facebook goops you can go on or just google

@procam448

3 жыл бұрын

👌 yes^

@garrettworrell6620

3 жыл бұрын

Alex Tran thanks

I see you got the money 💰 light on was it from the sensor placement or did you turn it on and forget it was unplugged lol it happens good video im sold

@procam448

3 жыл бұрын

Are you talking about my check engine light?

@technicalities341

3 жыл бұрын

Sorry yea I'm a tech my shop calls it a money light

@procam448

3 жыл бұрын

😂😂 it wasn’t because of the intake it was for Evap I got it fixed now

I did this to my 2015 Ford Fusion and I only hear it with the hood open. When I close the hood and rev it I can’t hear the whooshes anymore do u know why?

@itsl3roy890

Жыл бұрын

he has a blow off valve on it

Yo Bro I have a 2018 Platinum with the 2nd Gen 2.0EB with the extra 5hp & 5Lb Ft. was it easy to do the blow off valve? Already have the Solid Motor Mount & It’s helps a lot since I don’t have the AWD. I’m ready to start modding it. I want to keep a somewhat factory look so I have a Mondeo Front Bumper with Fogs & MKZ Cluster

@procam448

3 жыл бұрын

Nicce and no it was kind of a pain to install the blow off

@itsl3roy890

Жыл бұрын

@@procam448 let me guess it was a bitch because of the turbo location

What year is your fusion? I’ve got a 2020 and I’m debating on doing the same, but I can’t find one that’s listed as “compatible” anywhere. Yours doesn’t look any different than my engine bay.

@wadehm63

Жыл бұрын

I’ve got a 2020 2.0 and having the same issue. Even the K&N website is confusing because the one they show the tube from the engine to the filter is way too short to be compatible.

After installing does check engine light appear? + does the car need tuning after installing?

@itsl3roy890

Жыл бұрын

don't break the sensor and it wont and no tune the computer will auto adjust because of more air,. but if your doing more add ons other than this then i would

What did you say you already had on the car to make the blowing sound better?

@boyzburgau8543

2 жыл бұрын

A blow off valve

where Did you get a blow off valve? Sounds great

@stevengrieve3699

3 жыл бұрын

Amazon search boomba blow off valve

@demetriixx9964

3 жыл бұрын

@@stevengrieve3699 There are so many different ones for the Ford Fusion. There’s actual blow off valves and then adapters. I have a 2014 Ford Fusion 2.0 SE Ecoboost. What do I get?

@grayghostmedia5709

3 жыл бұрын

@@demetriixx9964 unfortunately the 13-16 2.0 needs a replacement BOV with a catch can instead of just an adapter

@Dis-Emboweled

3 жыл бұрын

No engine codes on the BOV?

@procam448

3 жыл бұрын

No

I have a question, did the intake make the check engine light to come on? Or was it already there before the installation?

@c1rcas2011

3 жыл бұрын

Most the times when you disconnect the mass air flow sensor the check engine light will come on.

@procam448

3 жыл бұрын

It wasn’t from the intake I had it on before for evap

@calebstarkey7833

3 жыл бұрын

ProCam replace the vapor canister purge valve. Top end, my fusion was running pretty rough. And sometimes a rough idle. Engine light was on for evap and that’s what I replaced. Much better. Now waiting for my K&N intake to come in 😬😬 love my 2.0 ecoboost haha

@procam448

3 жыл бұрын

I already did it fixed it it actually got so bad that my car just shut itself off in the middle of traffic now it’s like brand new and nicce

Bro I I just got a 2018 Ford Fusion SE ecoboost but it’s a 1.5l. Do you think that K&N intake will be good for this 1.5? Or will I need maybe other intake?

@procam448

3 жыл бұрын

If you Click on the link I have in the description and put your car in to Amazon and Amazon should tell you if it will fit your car

@migueldeloeraperez5812

3 жыл бұрын

Steeda has it. That’s what I have for my 2018 1.5

I have a 2020 2.0 ecoboost, would this fit? I cannot find a intake to fit

@procam448

2 жыл бұрын

I recommend going to the link in my description and putting your car into Amazon and it’ll tell you

Definitely didn’t have to drill that hole follow the instructions there’s a rubber insert and then it just slides in

@gabebell2374

Жыл бұрын

All the videos I see installing it they cut it

@droppinink7861

Жыл бұрын

Prob had 2.0 intake. I got 1.6 and I'd have to drill hole if it's 2.0 intake like if I buy a used one.

Whats a blah flalve and how do I get the pashhh noise too?? Currently have a 15' fusion SE 1.6L

@procam448

3 жыл бұрын

boomba blow off valve

@colinchilds

3 жыл бұрын

@@procam448 Haha gotcha! Thanks, I'll look into that too.

How good does it seal against the hood to keep heat out

@procam448

4 жыл бұрын

I don’t know but it does allow more air flow and cool sounds

@boyzburgau8543

2 жыл бұрын

Late response but intake air Temps don't matter much because after entering the intake it gets cooled by the intercooler

I have 1.5l turbocharged 4 cylinder. I wanna get this. Can i?

@itsl3roy890

Жыл бұрын

amazon most performance sites K&N site

What did you put on the fusion to hear the pshhhh better

@procam448

2 жыл бұрын

A bov valve

Will this fit a 2017 2.0L ecoboost?

@procam448

3 жыл бұрын

Yeah probably

Just so y'all know eco tech and ecoboost from chevy and ford they are the same engines and turbos they collab on both engines and the new 10 speed transmission....

@justsomeguy697

3 жыл бұрын

Can't find anything that supports they used the same engines. They might be both turbo and direct injection but they aren't made by the same people.

@koolaidwaterfountainsforth4236

3 жыл бұрын

I can confirm that is not the truth. Own both a 2.0 EcoBoost and a 2.0 ecotec turbo. They are definitely not the same. 2 very different designs 👍

How do U make that shhh sound? I have the same Ford Fusion

@TheMad31683

2 жыл бұрын

Boomba blow off valve adaptor is what I use but Steeda and others make them for our cars.

Any new mods to the fusion?

@procam448

3 жыл бұрын

Awe not rn but I do have a little surprise coming good

I'm not sure what intake will fit my 2018 2liter 4 cylinder ford focus se, wondering you anybody knows what should fit and sound good

@procam448

3 жыл бұрын

Is it the eco-boost

@zplayz644

3 жыл бұрын

@@procam448 sure is

@procam448

3 жыл бұрын

The link I left in in the description should fit

@zplayz644

3 жыл бұрын

@@procam448 ok thanks!

Do you have after market bov? Blow off valves?

@procam448

3 жыл бұрын

Yupp

Have you had any problems since you added this?

@procam448

3 жыл бұрын

Nope

what turbo does it have, I want my car to sound the same :(

@itsl3roy890

Жыл бұрын

2.0

0:48 you have a what on the car ?

@ironman98

3 жыл бұрын

A BOV aka blow off valve. Not all modern day turbo cars have blow-off valves. In fact most don't, it's usually an aftermarket thing. Boomba Racing, is one of the better-known BOV manufacturers and is probably what he has in there.

stock sound 1:00 cold air intake sound 5:25.. thx!

@itsl3roy890

Жыл бұрын

its not a cold air intake its a short ram. most to all CAI's the pipe goes down. and not where air box was

Hey man! Had a quick question, I’ve got the 1.5 ecoboost. Would this kit fit that motor or no? Thanks in advance!

@procam448

3 жыл бұрын

I’m actually not sure The intake might be in a different spot

@nathanstevens515

3 жыл бұрын

@@procam448 they’re in the same spot, my only concern is that i might not be able to close the hood all the way. Did your car have the flat air filter or the cone?

@procam448

3 жыл бұрын

I had a flat air filter

@procam448

3 жыл бұрын

What you can do is put your car in to Amazon and that link I have in the description Amazon should tell you if it fits your car

@nathanstevens515

3 жыл бұрын

@@procam448 I use CarId to buy all my parts. It says the kit will fit but once I put in what engine I have, it only gives me the option for the flat filter and a, probably 7-8” piece of tubing.

What year is your fusion I have a 2013

@bootlegbrother3172

Жыл бұрын

you can get the kit for it

What year is your fusion I have a 2017 2.0 eco boost se looking just like yours and I’m looking to do some of the same mods such as bov and a cold air intake?

@procam448

3 жыл бұрын

Yeah I have a 2016 I say send it it makes really cool sounds

@coledonnell893

3 жыл бұрын

Hell yea which k&n kit did you buy I’m seeing a couple different ones that sorta look like yours but not sure.

@coledonnell893

3 жыл бұрын

Also did you install your bov on top or underneath your vehicle

@procam448

3 жыл бұрын

I don’t remember exactly all you have to do is maybe go on Amazon put in your car find the intake and it should match up and tell you if it fits also with the bov do you have to takeoff your passenger front tire to get to it so you have to get the car in the air it’s a pain to install

@raghavdhamija8643

3 жыл бұрын

If you haven't already done so... The 2017 2.0 ecoboost fusion only needs a bova (blow off valve adapter) and not the full part and it was easy to install for me. Also, the adapter is MUCH cheaper (Near $95-100). All the best 👍

Where does the blow off valve go on the 2.0?

@procam448

3 жыл бұрын

Passenger side behind the wheel it’s kind of a pain

@ironman98

3 жыл бұрын

@@procam448 You got a bov adapter on this too? Probably why it sounds that way? P.S. If so that's probably why your check engine light is on.

@procam448

3 жыл бұрын

Check engine light was for evap I already fixed it

@ironman98

3 жыл бұрын

@@procam448 Ah ok nice. I'm back btw. Haunting this video. No idea why lol.

Does it keep your check engine light on?

@itsl3roy890

Жыл бұрын

as long as you don't break that sensor it will not come on he says in description it was on because of evap issues which it apperently a common thing on alot of cars lol

Will this fit the 2016 2.0!

@procam448

2 жыл бұрын

Yes that’s what this car is

I cant find intake for a 2018 anyone know it this will still fit or know where I can get one?

@procam448

3 жыл бұрын

I have a link in my description and put your car in to Amazon and Amazon will tell you if it fits

@allthatihave14

3 жыл бұрын

@@procam448 yep saw unfortunately it doesn’t

@procam448

3 жыл бұрын

Damnn man it’s possible they may make other filters for the car try looking around

@allthatihave14

3 жыл бұрын

@@procam448 is no prob I’ll call K&N and see what’s up. Also just installed a wind booster chip on my 2018 AWD Titanium ecoboost shits fire hidden potential I enjoy it

@procam448

3 жыл бұрын

Ohhh shittt sick man👌

What year fusion

@procam448

2 жыл бұрын

16

Does this void Factory warranty?

@procam448

3 жыл бұрын

Probably

@goku546686

2 жыл бұрын

Most mods do suggestion wait till ur car is past the 100k mile mark the Warrenty will have run out by then.

Does your car have a rough shifting mostly from 1-3 gear?

@procam448

3 жыл бұрын

Yes that’s normal for Ford Fusions unless it’s slipping on you then there’s a problem

@Matt561

3 жыл бұрын

I have a 2015 titanium and second to third is sometimes pretty rough

@timstaro

3 жыл бұрын

Matt561 yeah the same sometimes it’s so rough that makes me want to sell it. The car drives good but who knows how long the transmission will last. I changed transmission oil and do all needed maintenance but still kinda worrying every time when it shifts rough. I also noticed that it shifts way better after a long drive

@Matt561

3 жыл бұрын

@@timstaro it has a lot to do with the RPMs, when they are right it's smooth. I also found it's better with 93 octane fuel. It's some kind of timing issue.

@gshaeffergs

3 жыл бұрын

I’ve had a ‘13 taurus with the 2.0, 130k miles and a ‘16 fusion with the 2.0, 40k and both have had the same transmission characteristics for the most part. Taurus was giving me issues and slamming gears, but when it was acting right they both performed the same.

What's that check engine light on for?

@procam448

3 жыл бұрын

Evap

@B33EZ

3 жыл бұрын

@@procam448 I like this Mod. I have a 2016 Fusion. Im about to update the infotainment and add remote start to it. I am Kinda Ampd, like that Kenwood. HA. Next would be some body mods. Im considering this mod for the add HP... what do you know about tuning? Does the EMC need to be tuned after changing the intake like this?

Can I do this to a 2018 Fusion titanium?

@procam448

4 жыл бұрын

Yea

@karmamorgan6640

4 жыл бұрын

ProCam thanks bro you think I could use the same air intake?

@procam448

4 жыл бұрын

Probably yeah but make sure because there is 2 different ones one for the eco boost and a different one for the normal

@karmamorgan6640

4 жыл бұрын

ProCam ok I have the EcoBoost, I’m going to look for one today thanks bro love the videos maybe race one day lol

Would it fit on a 2013 Ford Fusion Titanium

@procam448

3 жыл бұрын

Is it the 2.0 ecoboost

@pataizud

3 жыл бұрын

Mine also 2.0 Ecoboost yr 2015....thinking to get 1,....can I know what is the part no,....I heard you mentioned that yours is Ecotech....is it differs to Ecoboost?

@procam448

3 жыл бұрын

I have the intake in my description and I meant to say eco-boost not eco tech

Nice job installing the Hot air intake kit. Congrats on lowering power and torque by increasing charge temps. Good thing you don't tune cars lol

@toddsmith2381

Жыл бұрын

Care to expand on that? I don't know shit about cars

0:46 what is the part that makes that noise?

@procam448

3 жыл бұрын

That blow off valve

@jonathanornelas2209

3 жыл бұрын

@@procam448 ohh lol thanks man

@itsl3roy890

Жыл бұрын

Blow off valve

Stock turbo or ?

@procam448

3 жыл бұрын

Yupp

Why is check engine light on?

@procam448

4 жыл бұрын

Evap code but I fixed it

What are all the mods on your fusion?

@procam448

4 жыл бұрын

Just the intake and a blow off

@sebastienskeffington9988

4 жыл бұрын

@@procam448 What blow off valve do you have?

@procam448

4 жыл бұрын

It’s called a boomba racing blowoff

@sebastienskeffington9988

4 жыл бұрын

@@procam448 Can you post the link of which one you have?

@adolfo98063

3 жыл бұрын

Sebastien Skeffington just type boomba bov on google

How do you make it make that noise at 1:03

@procam448

3 жыл бұрын

I have an aftermarket blow off valve

@drewpierce5193

3 жыл бұрын

@@procam448 might I ask were to buy

@drewpierce5193

3 жыл бұрын

And how much

@procam448

3 жыл бұрын

I’ll put a link in the description

Intakes/exhaust and headers don’t do anything for power unless you tune it ………

sounds like a 73 chevy with emphysema

@procam448

3 жыл бұрын

😂😭

is dude's garage doors closed? lol....

@procam448

3 жыл бұрын

😭😂

Dude open your garage when you crank the car

@Dragon228833

3 жыл бұрын

fordfiveohh for real. Dudes tryna kill his entire family

@procam448

3 жыл бұрын

😂😂😂😂

Hi there all ford fusion owners, I'm part of a lawsuit case against FORD ford manufacturing defects on the ford fusion models 13-21 that has coolant leaking into engine cylinders 1-2 causing misfire and complete engine failure, if you've experienced this before please file a case with NHTSA so we can get ford to recall this issue and so they can agree to finalize the lawsuit for these defects thank you.

You should have removed the tube before drilling, now you have debri in your engine😯

@procam448

4 жыл бұрын

I made sure I clean it all out that’s why I had the vacuum

What is it making that shhhhhhaaaasss sound couldn’t hear you lol

@ErythingFitness

3 жыл бұрын

Turbo