Western Filters PROVENT 200 Catch Can | HOW TO Install | 2021 Isuzu DMAX | D-Max Build Up Series #15

Автокөліктер мен көлік құралдары

Super easy DIY How To Install WESTERN FILTERS ProVent 200 CATCH CAN in a 2021 Isuzu DMAX & BT50 4JJ3. We install a ‪@westernfilters1‬ MANN + HUMMEL Provent 200 IV catch can into the DMAX & BT50 4JJ3 as part of their full install kit. It's an easy DIY catch can install. This is the new style Provent 200 IV with the OP Valve Integration.
Highly efficient oil separation providing ideal protection for the turbocharger and other components installed downstream. A ProVent 200 will stop all contaminates going back into your air intake manifold and we believe remove the need to block off your EGR valve, as there will be no oily residue in the system.
☑️ Big thanks to Western Filters for supporting this video! Check them out at www.westernfilters.net.au
⚡️Keen to support future content?⚡️
🙏Become a channel patron and get perks - www.patreon.com/videoshowmehow
🎁 Checkout VSMH merch - www.videoshowmehow.com
-----------------------------------
🛠 Gear used in Video
-----------------------------------
✅ Western Filters Provent 200 IV - www.westernfilters.net.au | ebay.us/7dqhGU
✅ Western Filters Provent 200 Filter Replacement - ebay.us/FLBNAl
✅ D-MAX Bonnet Strut Kit- ebay.us/SnBdmQ
✅ Kincrome Socket Kit - amzn.to/3q4baWe
✅ Toledo Rubber Hose Pipe Cutter - ebay.us/QnzrzF
✅ MaxPro Floor Mats 3D - ebay.us/PrpKv6
----------------------------
📸 Camera Gear
----------------------------
✅ Sony Alpha 7C - amzn.to/2Ui5pZl
✅ Sony SEL20F18G - amzn.to/3emmh8o
✅ Rode Wireless GO II - amzn.to/3zVmx6h
✅ SmallRig Camera Cage - amzn.to/3m0jlkO
✅ GoPro Light Mod - amzn.to/3CJCIVQ
✅ Neewer Light Panels - amzn.to/3fqbtWs
------------------------
⏰ Timecodes
------------------------
0:00 - Intro
0:32 - Giveaway!
1:55 - My thoughts on Catch Cans
3:12 - Unboxing
3:30 - Step 1 - Pop the bonnet/hood
3:42 - Step 2 - Locate install location
4:22 - Step 3 - Prepare your Provent 200
5:18 - Step 4 - Install bracket
6:17 - Step 5 - Install catch can
7:02 - Step 6 - Remove engine cover
7:39 - Step 7 - Remove factory hose
9:27 - Step 8 - Install piping
10:52: Step 9 - Reinstall engine cover
11:10 - Step 10 - Install drain hose
12:05 - Step 11 - Final checks
---------------------------
✉ Let’s connect!
---------------------------
✅ Instagram - / videoshowmehow
✅ Email - videoshowmehow@gmail.com
-----------------------------------------------
😀 About VideoShowMeHow
-----------------------------------------------
⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)
⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
⏩ What's with the gloves?
Not after any KZread fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing. Plus adds a little more personality I guess :)
New videos are being uploaded regularly so if there's something you'd like to see, have Questions and/or Comments drop me a line.
Cheers guys.
Adam
[Learn. Create. Share. Repeat]
#videoshowmehow #westernfilers #provent200
Disclaimer:
FYI if you click any of the product links above and end up purchasing anything I MAY get paid a small commission (not charged to you). This is one of the ways you can support the channel :) Your support helps me bring out more content for all you guys. VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.

Пікірлер: 141

  • @VideoShowMeHow
    @VideoShowMeHow2 жыл бұрын

    Check-out all the other D-Max content here -> kzread.info/head/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB

  • @jkpisces

    @jkpisces

    2 жыл бұрын

    Thanks a lot ! appreciate it . Subscribed !

  • @Upset_Crayon
    @Upset_Crayon2 жыл бұрын

    Great Video Adam well done mate, Pre Filter kit would be a good thing to do a Video on.. You are the only guy on the internet who does this for the new Dmax and it bloody awesome, keep up the good content.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Thanks mate, pre filter vid already done, out in a fortnight 👍

  • @padsmm
    @padsmm2 жыл бұрын

    G'DAY Adam, Just picked up the BT50 and will be doing most of the mods you've shown here. Thanks heaps mate for the videos you make I'm sure they not only help me visualise what's required but many many more people. Great job. Oh and just fitted the same catch can.

  • @troywhelan-fn2do
    @troywhelan-fn2do Жыл бұрын

    Hey Adam. Huge thank you for the videos. I've done 5 of your mods and the videos help no end. Looking forward to feul review. Don't be afraid to show basics every time for us first timers. Cheers Troy

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Cheers mate 👍👍

  • @davidmilton5943
    @davidmilton59432 жыл бұрын

    Excellent video Adam, very informative and easy to follow. I feel very confident that I can now install my own catch can. Thanks mate.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Glad it was helpful

  • @mattziegler1432
    @mattziegler14322 жыл бұрын

    Catch can definitely a must have with modern engines with direct injection and EGR 's. Will be fitting one when mine arrives!

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Agree!

  • @Feeksi32
    @Feeksi322 жыл бұрын

    Gotta say, the DIY raptor liner is the top of my list so far.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Keen to do this also. Raptored a bunch on Jeep and did a vid for a the channel a while ago, keep to do the tub on the dmax now

  • @FITTYCAL
    @FITTYCAL2 жыл бұрын

    Just picked up my21 bt50 and the catch can is on my list of reliability mods. Great to see a how to vid to help prepare. Keep up the great work 👍

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Congrats on the pickup 👍

  • @andymclaren7281
    @andymclaren72812 жыл бұрын

    Never ever done any mechanics or mods but you have inspired me to have a go. I'll let you know how I go as you certainly make it look easy - I hope!!!

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Music to my ears, you've got this 😉😁

  • @christhomas9763
    @christhomas97632 жыл бұрын

    Great video mate, just ordered my kit using the code. Thanks legend 👍

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    🤘

  • @tuss6457
    @tuss64572 жыл бұрын

    Great stuff mate! getting one put in soon, just did the rhino roof racks with the back bone on mine looks mint, they just released them. I recommended it 👍

  • @Darkrider998
    @Darkrider998 Жыл бұрын

    I'll be getting one !!

  • @jarrodmurfett8880
    @jarrodmurfett88802 жыл бұрын

    Get my Dmax this month! Woohoo!!

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Haha nice!!

  • @gregpaterno1446
    @gregpaterno14462 жыл бұрын

    Good day Adam I’ve fitted a Provent filter and the fuel extra filter to my ripper 2021 dmax twincab ute love their products 💪🏼👌🏼🇦🇺👍🏽🏆

  • @TheScrawley1
    @TheScrawley12 жыл бұрын

    Another great video mate, I've already fitted same catch can along with pre fuel filter from WesternFilters, long range tank, grunt tailgate assist, tjm snorkel and waiting for off-road animal bullbar. More to come.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Sounds awesome 👌

  • @markhaitsma6797
    @markhaitsma67972 жыл бұрын

    Awesome video Adam. Should be getting our PV 200 this week. Best reliable thing I’ll be doing to our Dmax is changing the oil in between services.

  • @georgesalouris
    @georgesalouris2 жыл бұрын

    Another great vid, ordered mine and arrived today 👍, install on the weekend. Discount was niiice ✌️. Cheers 🍻 georgie boy 😎.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Great stuff! Enjoy 👍

  • @redfine46
    @redfine46Ай бұрын

    hello Adam im just about to ibuy and install a catch can to my 2018 mitsubishi triton ute thank you for the video ..... then in the near future will be looking at a tune up for fuel ecomy and a bit more power.....

  • @benjotinsay3010
    @benjotinsay30104 ай бұрын

    Would love to see an installation of a catch can for an Ford Everest 2023. Thanks .

  • @dog4654
    @dog46542 жыл бұрын

    Can't wait to put one on my MUX! When I get it sometime this year!

  • @UncleWayne5104
    @UncleWayne51042 жыл бұрын

    With the 19 or so videos that you have posted I am probably going to do about 7 or 8 of them when my 22 X Terrain finally turns up. Cheers

  • @RevisionTrickzZ
    @RevisionTrickzZ7 ай бұрын

    Done, cheers Adam… I just fitted the drain hose to catch can first 👍

  • @CCRoberts
    @CCRoberts2 жыл бұрын

    Catch can and secondary fuel filter on my 79. Just gotta wait for the dmax to arrive to do the same to that.👍Thanks

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Is far away now? Hopefully the wait isn't too long!

  • @CCRoberts

    @CCRoberts

    2 жыл бұрын

    @@VideoShowMeHow Another 3-5 months.🤞

  • @jasonpietzner7728
    @jasonpietzner77282 жыл бұрын

    Had EGR go on my navara at 4 am towing boat to go fishing….not fun. Wish had known at catch cans before that. 3,500km into mu Isuzu and loving it and this channel. Provent is on the way!!

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    👍👍

  • @leighsoft
    @leighsoft Жыл бұрын

    nice vid mate

  • @BallBagsification
    @BallBagsification2 жыл бұрын

    Bought one of these from Western Filters a week ago, thanks

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Hope you were able to use the code in the vid for some extra bucks off 👍

  • @BallBagsification

    @BallBagsification

    2 жыл бұрын

    Sure did thanks

  • @philruhle3537
    @philruhle35372 жыл бұрын

    Generally I think, having no mods is most reliable.. However I do think this one is a must, and have been procrastinating about it since I bought my dmax in April. I just used your code and ordered one in so thanks again for doing the hard work for us. P.s. no mods is also boring.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Cheers Phil

  • @802Garage
    @802Garage2 жыл бұрын

    Really solid video. Upside down ChrisFix, haha.

  • @machete_metal6011
    @machete_metal60112 жыл бұрын

    I got the direction plus can and preline kit that mounts up front, if your getting cold weather it's good to drain often as it seems to build a bit of condensation in the drain line. Although yours might get less as it's closer to the motor. Yours definately has better/easier installation though. Spring clips drove me nuts.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Good tip!

  • @gpetheri
    @gpetheri Жыл бұрын

    I'll give you all a clue why the installation of the drain hose was mysteriously skipped.... No matter what the instructions say - CONNECT THE DRAIN HOSE TO THE CC FIRST!! Feed it down through the chassis as you place the CC on the bracket.

  • @BenMitro
    @BenMitro2 жыл бұрын

    The best reliability mod I've done is to take the lead out of the right foot.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Hey @Benny you've won the merch pack mate! Shoot me an email videoshowmehow@gmail.com and I can get out to you!

  • @matthewwinning7556
    @matthewwinning75566 ай бұрын

    Done same mod only thing I cut the drain hose shorter rather than zip tie it to the brake line

  • @jarredbradbury3357
    @jarredbradbury33572 жыл бұрын

    sweet buying one now for my dmax that is due for delivery in January!

  • @ahmad6453

    @ahmad6453

    2 жыл бұрын

    Hi Jarred, when did you order your Dmax? I'm still waiting on mine ordered it in March and still no ETA.

  • @jarredbradbury3357

    @jarredbradbury3357

    2 жыл бұрын

    @@ahmad6453 july an january is just the estimated time could take longer or could get it earlier

  • @Upset_Crayon

    @Upset_Crayon

    2 жыл бұрын

    @@ahmad6453 Ordered mine September 2020 got delivery in March 2021.. All I can say is, it is worth the wait.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Yeah nice nice least you get the 22!

  • @ahmad6453

    @ahmad6453

    2 жыл бұрын

    @@rajahhindi3921 I hope I'm in the same boat. The dealer told me the same .. looking forward to the heated seats lol and red stitching.

  • @johncampbell3628
    @johncampbell36282 жыл бұрын

    Need to install drain hose before install. Much easier

  • @arcadian7496
    @arcadian74962 жыл бұрын

    Great video mate! Wish you are still doing 'VideoShowMeHow' in your JKU 2008 CRD!! 😃

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Mate, me too! I miss that beast 😥

  • @mattmii2930
    @mattmii29302 жыл бұрын

    Hello i from Malaysia

  • @kevwells
    @kevwells2 жыл бұрын

    Nice one, I already did mine but good to see I got it right ;). I installed the drain hose to the filter first though. Also where you installed the clamp for the hose be careful there is a brake line on the other side you don't want to screw into :). When are you doing the fuel filter??

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Already done, vid out week after next :)

  • @gregorycoogle7621
    @gregorycoogle7621 Жыл бұрын

    Like to see a video to install on the Ford F150 3.5 eco-boost system. Thanks

  • @danielng9007
    @danielng9007 Жыл бұрын

    Thanks for yr great presentation once again. Just installed mine. What are your thoughts on installing Munji egr delete?

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Not a fan personally as want to keep things legal but each to their own

  • @SonicsnakeCNR
    @SonicsnakeCNR2 жыл бұрын

    Awesome Vid mate🤙just intalled one on ma Dmax while its still new. Would you reccomend changing the intercooler piping from rubber to hard piping?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Nah no real need, maybe down the track as the factory ones age etc unless you're keen for a bit of bling

  • @dionkuli3601
    @dionkuli36012 жыл бұрын

    Hello friend good joob

  • @dylanevans6063
    @dylanevans60632 жыл бұрын

    Hey Adam 100% is the secondary fuel filter from Western Filters. Real easy to install and comes with everything. Just like the catch can does.

  • @Upset_Crayon

    @Upset_Crayon

    2 жыл бұрын

    Just ordered Both which is pretty handy from Western Filters.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Yeah agree mate, have I've installed as well, that vid is filmed and will be live in a fortnight 🤘

  • @Bgnofficial24
    @Bgnofficial242 жыл бұрын

    Im from indonesia.

  • @meredithdahl7755
    @meredithdahl77552 жыл бұрын

    Ironman commercial deluxe bullbar & gvm upgrade. The next one is a uhf & catch can. Should a catch can be installed straight away? I just got a 2021 my19 mux

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    In my opinion, yep

  • @jeremy8570
    @jeremy8570 Жыл бұрын

    hihi, want to ask what is the diameter of the factory PCV hose, thanks

  • @user-lf8tk3nh2h
    @user-lf8tk3nh2h7 ай бұрын

    I know this video was a while ago but I just installed my western filter catch can and unsure where to attach the drainage hose as it seems quite long… thank you

  • @VideoShowMeHow

    @VideoShowMeHow

    7 ай бұрын

    hey hey - connects to the bottom of the catch can, check-out step 10 in the video

  • @mikejung3908
    @mikejung390810 ай бұрын

    To be honest the provent 200 and my after market provent look identical in every way.

  • @abdullahalmoabadi9397
    @abdullahalmoabadi93973 ай бұрын

    What is the size of the hose? Is it 1 inch?

  • @1camo1
    @1camo1 Жыл бұрын

    Would you consider adding the Munji EGR delete cable in addition to the catch can?

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    They're not for me, keeping the rig legal

  • @maxi8786
    @maxi87868 ай бұрын

    Hola. Instale el mismo sistema. Pero al pasar los 90 km/h produce ruidos

  • @markbitcon5701
    @markbitcon5701 Жыл бұрын

    Hello Adam . A mate has just installed a Provent 200 kit into his 2022 D Max . The position is different as it is mounted in front of the battery and beside the radiator. Is this an option or just maybe another company/branded kit ? Ta . Enjoyed your video by the way .

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Different kit, I prefer it on the hot side as the hose runs simply aren't as long

  • @MP-hf3jn
    @MP-hf3jn2 жыл бұрын

    Hey Adam, what do you think about a 2nd fuel filter?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Think they're a great idea, have one installed and filmed, vid up in a fortnight :)

  • @christodd3864
    @christodd3864 Жыл бұрын

    Hey Adam I've got a new Dmax coming in a couple of weeks. I've already ordered a few things for it, one being a catch can. I've just recently seen a vid on youtube about the possibility that it can cause a pressure build up in the crankcase and start to leak oil out the rear main seal. The vid i seen, the filter was only about 10k into its 40k life. Was just wondering if you've had any issues with your catch can? Cheers Chris

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    No issues at all. I do know there's some fake units out there without the pressure relief valves. So far so good for me, ran one for years on my JK crd not issues either.

  • @leonz1982
    @leonz1982 Жыл бұрын

    Hi, did you have the drainage tap zip tied to the ABS lines?

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Hi, no have loosely attached to a bolt behind fender. Not really needed but just want to have a backup in case of weird angles offroad

  • @Ryan-ik3ji
    @Ryan-ik3ji2 жыл бұрын

    Hi Adam, Awesome video ,I was waiting for this install. Just shows how easy its to install with proper guidance, will order one today and will be installing myself. Cant believe this video saved me $350 as that's how much TJM charges for install. On My D-Max I've got snorkel and electronic rust prevention installed. Also question : looks like you got A/T tyres , that is something I need , what make ant type are they ?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Hey mate, easy save of $350! You can total do yourself. Tyres are Maxxis Razr AT-811 - an agressive all terrain tyre. They're 285/65/18. If you're doin any sort of offroading but particularly dirt/rocks I would recommend upgrading from the factory tyres yes, they're just road tyres (not very strong offroad).

  • @TheChewy6980
    @TheChewy698011 ай бұрын

    Hi Adam, do you have a link for the catch can you used on your jeep wrangler crd?

  • @VideoShowMeHow

    @VideoShowMeHow

    11 ай бұрын

    Is the same catch can as this, sorry don't have a link other than the one in this vid description

  • @anthonysalafia7017
    @anthonysalafia70172 жыл бұрын

    Hi just wondering what engine oil are you using in your D Max for top ups

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    I'm running 15/40 from the dealer, if you're topping up needs to be the same as what's in there

  • @stevebirchall5233
    @stevebirchall5233 Жыл бұрын

    Have you got a kit for the 1.9 rg dmax yet please

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Best to speak with @Western Filters on this 👍

  • @Darkrider998
    @Darkrider998 Жыл бұрын

    Alot of mixed reviews on dmax + catch cans alot of people saying it causes gasket leaks due to high pressures being restricted with the can

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    A genuine provent has pressure relief built in. As with anything, needs to be maintained to work, eg emptying every 5k or so,

  • @alsabahhattaie6065
    @alsabahhattaie60653 ай бұрын

    Do u have any link to buy this stuff? Gonna install to my D-Max

  • @VideoShowMeHow

    @VideoShowMeHow

    3 ай бұрын

    Yep in the video description 👍

  • @lachiewatt1003
    @lachiewatt10032 жыл бұрын

    hey mate, noticed you said you previously had a jeep. what jeep did you have if you don’t mind me asking? and how does it compare to the dmax? cheers, Lachie

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Yep sure did, checkout the channel for the full walk around vid I did for the sale (and for me to look back on to be honest 🥲) Can't really compare, the Jeep (Turbo diesel JK) was a totally different build, super capable off-road, not really a daily. DMax is much much more refined, much better engine, much more comfy etc. My Jeep was a rock crawl type build, jeep is a super comfy tourer/tow vehicle is kinda how I see it

  • @lachiewatt1003

    @lachiewatt1003

    2 жыл бұрын

    @@VideoShowMeHow thanks for your reply mate. I’m coming out of a 3.8L Wrangler and into an X-Terrain but am still pretty uncertain. I sold the Jeep and have been pretty bummed about it ever since, i loved it, never had an issue with it. I’m torn again between keeping the Dmax order or getting another wrangler but your message has helped me out a little. I’m in need of better economy, comfort and reliability. cheers again.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Yeah mate still miss my rig, but the dmax is a whole different world. Zero regrets. If I'd kept would only take the Jeep on real hardcore tracks but would prefer the dmax for everything else, it really is a great do it all vehicle. Get the dmax mate, you won't know yourself. Besides, I need the support bringing the jeep wave over!! 😜🤘

  • @lachiewatt1003

    @lachiewatt1003

    2 жыл бұрын

    @@VideoShowMeHow loved the jeep wave, will definitely try start up the dmax wave with ya 🕺🏽

  • @Mcdonut697
    @Mcdonut697 Жыл бұрын

    Can this model be used on a 1.9 rz4e engine as well?

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    Yep

  • @supericeman9817
    @supericeman98172 жыл бұрын

    I have a catch can and prefilter, on there way from western filters.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    They're good kits 👌 Have the pre filter also (vid up 15/8 😊)

  • @rec1962
    @rec19629 ай бұрын

    Can these be bought in the UK? I've had a google but can't see them sold anywhere

  • @VideoShowMeHow

    @VideoShowMeHow

    9 ай бұрын

    Does the link in the description work for you? Unsure if they ship international? Otherwise could try an approved ebay distributor?

  • @rec1962

    @rec1962

    9 ай бұрын

    @@VideoShowMeHow Thanks for the reply! It says they don't ship to the UK unfortunately. I think I may have found them now doing a bit more digging on eBay

  • @yourlocalaussie3795
    @yourlocalaussie37952 жыл бұрын

    I would do mods that voids the warranty til the warranty ends because the best thing about the warranty is if something breaks the dealer will replace it for free!!

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Catch can doesn't void warranty

  • @yourlocalaussie3795

    @yourlocalaussie3795

    2 жыл бұрын

    @@VideoShowMeHow Oh ok thx for the info

  • @mrgrumps3062
    @mrgrumps3062 Жыл бұрын

    Whats the difference between these and the cheap ebay copy ones apart from the rip off price ?

  • @VideoShowMeHow

    @VideoShowMeHow

    Жыл бұрын

    These have proper pressure relief built in and a filter that actually works

  • @gregkeegan7715
    @gregkeegan77152 жыл бұрын

    Going in for the 3000 look over not really a service will see if the say anything about catch can

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Take the warranty book with you and show them the bit under 'your responsibility' where carbon build up isn't covered

  • @gregkeegan7715

    @gregkeegan7715

    2 жыл бұрын

    Just picked the D max up nothing said about catch can or fuel filter all good.

  • @jkpisces
    @jkpisces2 жыл бұрын

    is this necessary on the new dmax?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    In my opinion, all new diesel 4wd should have them

  • @jkpisces

    @jkpisces

    2 жыл бұрын

    @@VideoShowMeHow why though ? And what will go wrong without it

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    @@jkpisces talk about it in the first 2 mins of the video... To give you an example I recently drained mine and got 155ml of oil from the catch can after around 5k... Without the catch can catching this it would have been all through the intake system and over time clogging EGR, sensors etc. There's LOTS of info out there on catch cans on diesels, worth a look 👍

  • @jkpisces

    @jkpisces

    2 жыл бұрын

    @@VideoShowMeHow just wonder why not many install it here in my country but will research it out .thanks a bunch

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    @@jkpisces checkout the short I just uploaded, gives you an idea of just how much oil vapour it catches

  • @paulg101
    @paulg1012 жыл бұрын

    I'm surprised you have to cut/trim hoses on a 'vehicle specific' kit?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    Could get away without, I was just keen for it to be a little tighter if that makes sense 👍😊

  • @MP-hf3jn
    @MP-hf3jn2 жыл бұрын

    The replacement filters are expensive.

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    They're about $60-70 AUD but are good for around 35k so depends how you look at it :)

  • @MP-hf3jn

    @MP-hf3jn

    2 жыл бұрын

    Can you add the replacement link? Also the 2nd fuel filter aswell?

  • @VideoShowMeHow

    @VideoShowMeHow

    2 жыл бұрын

    @@MP-hf3jn hey mate sure can do, will update shortly

  • @user-lf8tk3nh2h
    @user-lf8tk3nh2h7 ай бұрын

    I know this video was a while ago but I just installed my western filter catch can and unsure where to attach the drainage hose as it seems quite long… thank you

  • @VideoShowMeHow

    @VideoShowMeHow

    7 ай бұрын

    I show this in the video?

Келесі