Ordered one of those for my son! He's gonna love it!
@roostercoggburn7436 Жыл бұрын
Nice comparison, I used to have a 257, wish I still had it, and now have a wemars and nice to see head to head! Good video 👍
@cajun3197 Жыл бұрын
Good luck with the 257, I’m sure you can make a great runner out if it🤙🏽
@nseric1233 Жыл бұрын
My ported china saws with a 372 carb/bigger intake cut at close to 13000rpm, stock they were close to 10000rpm in the cut. They're like the wemars but orange, ones 61cc the other 54cc, the 54 revs a little higher(15000rpm no load) and is nicer half the time because of it.
@CadillacZachOffical Жыл бұрын
I'm glad to see this comparison. I've been really impressed with my cheap saws (Vehpro 50cc , Salem Master 62cc, and an Ebay 68cc that was really 58cc)
@fruitsyfarms5115
Жыл бұрын
Well one number has to be bigger than what it really is with these Chinese saws and hey why not make it the first number 😂
@gibsonbrigh Жыл бұрын
Iam impressed with the Wemar. I got like 15 Stihls from 192 and 3s to 084 , 064. Even got Huskys. But for the price. I love the way it runs. Just adjust the carb to smooth it out. Broke it in on 40:1. And running it on Stihl mix 50: 1. Used it on a few tree jobs. It already paid for it self. Now just a different color toy like the Hossforma 660s. I got one ported Hossforma and one stock. Done deal
@coreycorp7048 Жыл бұрын
Those 257’s come alive with a good muffler mod and alittle machine work- port work. Its dont take much. If you can find the bigger hda87 carb and mesh filter that helps alot to.
@redtiller1975 Жыл бұрын
What Tac do you use and can you post a link? Great videos.
@crazyfeller5704 Жыл бұрын
👍
@charlespeacock8360 Жыл бұрын
Almost as satisfying as a normal wackoff; thanks. Perhaps you could lobby for two classes of Wild Thing competitions at Sawfest. Watching some of the other builders use power adders (nitro) maybe there should be working saw and unlimited classes.
@diy75946 ай бұрын
The wemars looks alot like 455 rancher wonder if its the same saw
@bryantitus6634 Жыл бұрын
The 57cc saws (56.5 I believe) very likely will run happier stock with a .325 chain. And full 60cc saws love them but likely cut the same as they would with 3/8 time wise.
@kingsaws Жыл бұрын
I just bought a 257 the other day, I think a 261 cylinder will fit it , might make for a good combo
@modarkthemauler
Жыл бұрын
Yep, a 262/261 cylinder and piston is a easy bolt on swap. You can even keep the 257 top cover if you swap the air filter to the smaller 242 one. The Dukes Nikasil aftermarket kit is supposed to be good, haven't upgraded my 257 yet though.
@Jesusiskingamen7 Жыл бұрын
You are gone sell a lot of those Chinese saws man 😂
@oldcodger1929 Жыл бұрын
Thanks for taching that Wemar for me. That's interesting they claim it only pulls 8500. It sounds faster than 8500 that's why I asked.
@elpolaco7654
Жыл бұрын
As I said before I am almost sure this 8500 rpm is the rotational speed where the engine is at its peak power. At least according to them.
@Doc-Cole_Trickle-of-Chainsaws10 ай бұрын
👍🆙BigGuy
@Doc-Cole_Trickle-of-Chainsaws
10 ай бұрын
Go Wemars Go!!
@fruitsyfarms5115 Жыл бұрын
When I seen the Thunder Cats light shield I had to check it out
@novicelumberjack
Жыл бұрын
Do a search for "ThunderKitten Unleashed". You'll get hard.
@Doc-Cole_Trickle-of-Chainsaws
10 ай бұрын
@@novicelumberjack😁
@zachdiehl3401 Жыл бұрын
What kind of wood is he cutting with wemars in this video thanks
@dooberoso
6 ай бұрын
11:42
@Jesusiskingamen7 Жыл бұрын
Dang man your 257 seems real sluggish
@beenzer1109
Жыл бұрын
Yup... Very very flat...
@novicelumberjack
Жыл бұрын
This is the second one I've had in my hands. Both seem fine...then you put them up against something else and you figure out real quick...they ain't all that. But Cajun gave me his recommendations for port work, and he has good success getting them to come alive. I'm sure there will be a huge improvement after I port it.
@tedmiller17456 ай бұрын
So close to getting that Wemars just for sh and giggles. Just not sure...What was your break in?
@novicelumberjack
6 ай бұрын
Nothing. No break in. Just run it. Get the more squared looking wemars. I think the more modern looking ones are cheaper build quality.
@ToddAdams1234 Жыл бұрын
That tach is reading correctly from what I can “perceive”. It’s BOUND to bounce around some because the engine RPM is going to be bouncing around some in the cut as well. It’s impossible to have a consistent well, everything in the cut. We really aren entertained by this and we all like the EDUTAINMENT. Yes, combined words of entertainment and educated. !!!
Пікірлер: 31
Ordered one of those for my son! He's gonna love it!
Nice comparison, I used to have a 257, wish I still had it, and now have a wemars and nice to see head to head! Good video 👍
Good luck with the 257, I’m sure you can make a great runner out if it🤙🏽
My ported china saws with a 372 carb/bigger intake cut at close to 13000rpm, stock they were close to 10000rpm in the cut. They're like the wemars but orange, ones 61cc the other 54cc, the 54 revs a little higher(15000rpm no load) and is nicer half the time because of it.
I'm glad to see this comparison. I've been really impressed with my cheap saws (Vehpro 50cc , Salem Master 62cc, and an Ebay 68cc that was really 58cc)
@fruitsyfarms5115
Жыл бұрын
Well one number has to be bigger than what it really is with these Chinese saws and hey why not make it the first number 😂
Iam impressed with the Wemar. I got like 15 Stihls from 192 and 3s to 084 , 064. Even got Huskys. But for the price. I love the way it runs. Just adjust the carb to smooth it out. Broke it in on 40:1. And running it on Stihl mix 50: 1. Used it on a few tree jobs. It already paid for it self. Now just a different color toy like the Hossforma 660s. I got one ported Hossforma and one stock. Done deal
Those 257’s come alive with a good muffler mod and alittle machine work- port work. Its dont take much. If you can find the bigger hda87 carb and mesh filter that helps alot to.
What Tac do you use and can you post a link? Great videos.
👍
Almost as satisfying as a normal wackoff; thanks. Perhaps you could lobby for two classes of Wild Thing competitions at Sawfest. Watching some of the other builders use power adders (nitro) maybe there should be working saw and unlimited classes.
The wemars looks alot like 455 rancher wonder if its the same saw
The 57cc saws (56.5 I believe) very likely will run happier stock with a .325 chain. And full 60cc saws love them but likely cut the same as they would with 3/8 time wise.
I just bought a 257 the other day, I think a 261 cylinder will fit it , might make for a good combo
@modarkthemauler
Жыл бұрын
Yep, a 262/261 cylinder and piston is a easy bolt on swap. You can even keep the 257 top cover if you swap the air filter to the smaller 242 one. The Dukes Nikasil aftermarket kit is supposed to be good, haven't upgraded my 257 yet though.
You are gone sell a lot of those Chinese saws man 😂
Thanks for taching that Wemar for me. That's interesting they claim it only pulls 8500. It sounds faster than 8500 that's why I asked.
@elpolaco7654
Жыл бұрын
As I said before I am almost sure this 8500 rpm is the rotational speed where the engine is at its peak power. At least according to them.
👍🆙BigGuy
@Doc-Cole_Trickle-of-Chainsaws
10 ай бұрын
Go Wemars Go!!
When I seen the Thunder Cats light shield I had to check it out
@novicelumberjack
Жыл бұрын
Do a search for "ThunderKitten Unleashed". You'll get hard.
@Doc-Cole_Trickle-of-Chainsaws
10 ай бұрын
@@novicelumberjack😁
What kind of wood is he cutting with wemars in this video thanks
@dooberoso
6 ай бұрын
11:42
Dang man your 257 seems real sluggish
@beenzer1109
Жыл бұрын
Yup... Very very flat...
@novicelumberjack
Жыл бұрын
This is the second one I've had in my hands. Both seem fine...then you put them up against something else and you figure out real quick...they ain't all that. But Cajun gave me his recommendations for port work, and he has good success getting them to come alive. I'm sure there will be a huge improvement after I port it.
So close to getting that Wemars just for sh and giggles. Just not sure...What was your break in?
@novicelumberjack
6 ай бұрын
Nothing. No break in. Just run it. Get the more squared looking wemars. I think the more modern looking ones are cheaper build quality.
That tach is reading correctly from what I can “perceive”. It’s BOUND to bounce around some because the engine RPM is going to be bouncing around some in the cut as well. It’s impossible to have a consistent well, everything in the cut. We really aren entertained by this and we all like the EDUTAINMENT. Yes, combined words of entertainment and educated. !!!