The more I watch your videos the more I want a Domino!! This machine is a game changer. It would really up my woodworking skills! Thank you!

@sedgetool

7 ай бұрын

Right on!

@beantea5592

6 ай бұрын

It's worth it. Expensive but it just works perfectly. The precision you get out of it is spot on and you get it fast and easy. I've had many times where I was sure things weren't going to come together as nicely as I wanted them to only for them to line up perfectly because of the domino.

Every time I watch one of your videos, I always find/learn something I did not know before. Thanks a bunch, and keep up the good work!

@sedgetool

Жыл бұрын

Thanks, will do!

Thanks Sedge and Big D, a very useful reminder. Superb explanation and clear instructions. Appreciated!

@sedgetool

Жыл бұрын

Our pleasure!

thanks guys! I never used those cross stops before but now I definitely will!

@sedgetool

Жыл бұрын

You bet Eric !!!!!!

Very helpful - as always. Looking good, Medium D!

@sedgetool

Жыл бұрын

Glad to hear it!

Super helpful. Thanks for taking the time to enlighten us!

@sedgetool

Жыл бұрын

You bet!

Glad I found this. Never knew the purpose of tight and loose mortise. You see all these guys using this machine and they are always hammering their pieces. Learned something new.

@sedgetool

Жыл бұрын

Wicked cool !!! Thanks for watching

Thanks guys for yet another killer video. The best thing about Festool, besides their awesome products, are the video you produce Sedge, which makes it possible for me to use all aspects of the tool. Something I wouldn’t be able to if I had to read through a manual.

@sedgetool

Жыл бұрын

Thank you so much Klaus !!!

Thank you, Sedge and Big D!

@sedgetool

Жыл бұрын

You bet Peter !!!

Just bought my first Domino 500 and am extremely impressed with this tool. It was worth the cost and all the hype is real. Thank Sege for all the videos detailing this machine. Your instructions are by far the most useful and viewer friendly of all that I have seen. You speak in layman's terms so it's easy to understand and comprehend. Keep em coming. Thanks again for the instructional videos.

@sedgetool

Жыл бұрын

Thank you soooooooooooo much Steve !!!!

Thanks Sedge, just learned more Festool Domino info

@sedgetool

Жыл бұрын

Thanks Patrick !!

Dude, I saw your festool wall!!! what a great job you have. Videos are very educational.

@sedgetool

Жыл бұрын

Thank you sooooo much Christopher .

This video was really helpful. The more projects I build, the more I use an object any time I can over a ruler or tape measure. That’s where this tool really comes into its own. You posted a snarky reply to a comment of mine about using the loose setting on another video. However, now I understand why you prefer a single domino to index the side-to-side movement of the joint. It’s rare to have a joint where that side-to-side sheer strength has any importance, so alignment is the key. In fact, I can’t come up with an example making cabinets or drawers where the strength of the joint in that direction matters. And your approach will make assembly easier.

@sedgetool

8 ай бұрын

cool Thanks !!!

Amazing Sedge & big D: Tomorrow on a client project I will use this exact technique!

@sedgetool

Жыл бұрын

Sounds great!

Yes Sedge this Video was Helpful . Thanks Guys

@sedgetool

Жыл бұрын

Glad to hear Milan !!!

Great info. Thank you.

@sedgetool

4 ай бұрын

You bet!

Great technique reminder, cheers guys! 👏👍😀

@sedgetool

Жыл бұрын

Our pleasure!

Awesome istruction. Thanks for sharing.

@sedgetool

Жыл бұрын

Glad it was helpful!

Very helpful thankyou. I mistakenly thought you might do one side tight and the other side loose, but during the video I realised that because you reference the previous hole, the loose hole side would have a different spacing to the tight hole side. My stops are in the post, looking forward to using them, and thank you for the instruction!

@sedgetool

7 ай бұрын

Glad it was helpful!

great video. Well, yeah, I have a 500 and a 700. LOVE them but yep, didn't know what that particular device was for. Now I know. Wow, very useful. I'm going to watch all your vids now.

@sedgetool

Жыл бұрын

Glad I could help!

I find when I make both sides of the joint loose it works against me trying in the glue up. I have better luck when I make one side entirely tight setting while the mating piece has one tight and the rest loose to make the assembly come together better. Also it allows you to glue one side in place for a larger glue up for less stress. Thanks for sharing these tips!

@sedgetool

Жыл бұрын

Thanks

@teac117

Жыл бұрын

How would you use the cross stop with one side tight and one side loose? I figure there's a +3mm drift on the loose side which eventually will shift the centers too far apart for the corresponding tights. Or am I wrong here?

@realpdm

Жыл бұрын

@@teac117 That is a totally valid point! I haven't done this method with the cross stops, only when doing the 'to a line' method like when doing a table top glueup. I've used the cross stops as references from the edge of the board so I get one further in than the built in would allow but you are absolutely right it wouldn't work to use the mortises as references this way.

@brandonblatchley

Жыл бұрын

@@realpdmteac117 it’s possible, you have to double cut the loose ones. You cut them all tight working away from your original and then adjust to the loose setting and work your way back.

@chipsterb4946

8 ай бұрын

@@brandonblatchleyinteresting approach. I had thought about doing one side tight and the other loose but hadn’t come up with your solution.

Best vid on domino I've watched Bri.

@sedgetool

Жыл бұрын

Thanks Bri !!!!

@georgebutler3rd

Жыл бұрын

@@sedgetool Ha, ha, ha!

Thanks again for this info.

@sedgetool

Жыл бұрын

You bet!

My Cross Stop box just arrived in the post, i opened it up then immediately looked for a Sedge video on how to use them! As always, all my questions answered ! Thanks Sedge. I wonder how many people you have taught to use this awsome tool correctly!

@sedgetool

9 ай бұрын

Glad it was helpful!

Thanks guys!

@sedgetool

Жыл бұрын

Thank you too!

Holy smokes! I had no idea!! I have always considered purchasing the Woodpeckers accessory for this, but I never needed it for more than about 8 inches....and it turns out I already have them?!! Most I've learned on a Thursday morning in a long time :)

@sedgetool

Жыл бұрын

Glad I could help!

Use mine this weekend! I always forget to use the mortis I just made as a reference for the next one.

@sedgetool

Жыл бұрын

cool

Thanks Guys. It is starting to set in and the light bulb is getting brighter

@sedgetool

Жыл бұрын

Wicked cool David !!!

@davidmeyer9204

Жыл бұрын

@@sedgetool I just ordered the DF500 and the Domino set. really looking forward to it and catching up on the HOW TO videos.

Love my DF500. I had a Mafell DuoDoweler and I sold it to get this. The Mafell was great but it didn't have the flexibility of the Domino.

@sedgetool

Жыл бұрын

cool

Big D just noticed the weight loss you’re looking great!

@sedgetool

Жыл бұрын

Big D is looooooooking gooooood !!!!!!

As a complete newbie to the Domino world, your videos have been my main source of learning and have learned so much, thanks! What's the relevance of the 37mm from the flap to centre of the bit? Why not 35 or 40? Does the 37 actually have any meaning behind it? Also, why come in off the first flap (37mm) and not say 20mm (with the flap on the removeable base)? Thanks

@sedgetool

2 ай бұрын

37mm relevance is the same distance in 32mm cabinetry from the front of the cabinet to the center of the 1st system holes....

Great video, I like your series on the Domino, ps I'm from the South, it took a while to get used to your Yankee Accents. LOL

@sedgetool

Жыл бұрын

LOL...I have an accent ???

This video should come within the case. lol. I've been making mark lines before picking up the machine.

@sedgetool

Жыл бұрын

glad we could help !!!

Never let the bit chaddah

@sedgetool

Жыл бұрын

🤙

So, I've never been able to get the mortises from my cross arms to line up consistently. It finally occurred to me to measure the actual distance to both spring loaded pins. Turns out that my left and right have an error/ difference of 1/16th of an inch. So, on small pojects it didn't matter, but on big panel glue ups, they will never line up correctly. Looks like there was a manufacturing oops somewhere.

@sedgetool

5 ай бұрын

The cross stops are adjustable...look at the front ...there is a slotted recess..on the side is a hex to unlock the pin which is on a cam...

@processpsych

5 ай бұрын

@@sedgetool thank you so much! I'll check it out tonight!

varmit72 I have three Dominoes in the shop. Two 500's and one 700. Each has its own Cross Stops. Two of the Cross Stop sets do not produce aligned mortises. Is there a simple method to adjust the Cross Stops pins so that both sides are equal and to make all three sets equal?

@sedgetool

Жыл бұрын

Yes .. on the side of the cross stop pin there is a small hex screw … after loosening… in the front of the pin take a slotted screwdriver and by pushing the pin in you can adjust the pin

These videos are very helpful. The Festool engineers put a lot of effort in to adding in lots of cool features. Your videos help spread the knowledge to customers… They should hire you as a spokesperson 😊.

@sedgetool

Жыл бұрын

Thank you very much!

What is the best way to figure out which setting to set the cross stop to? I get confused because going from tight to loose changes the spacing by 3mm. I've already accidentally hit a domino when trimming a panel. Is it best to avoid putting them within 150mm of the ends?

@sedgetool

Жыл бұрын

it all depends on how much you have to waste off the panel.....

Shout out to “Tooth and Nail” records.

@sedgetool

8 ай бұрын

👍

Sedge, for some reason my right and left cross stops have been giving me mortices 2mm or so apart making it impossible to align. I called Festool about this and they said something about calibrating the pins but were very unhelpful with the issue. How do I resolve this?

@sedgetool

Жыл бұрын

the pin on the cross stops have an adjustment........there is a hex on the side ..loosen it then take a slotted screwdriver and look directect at the pin and you will see a slot . , depress the pin and use the screwdriver ..,it is cammed and by doing a few tests you can recalibrate...hope this makes sense.

I’m still waiting for a Domino only in person class lol

@sedgetool

Жыл бұрын

Thanks Matt !!!!

All this work going on... It's time for a beer

@sedgetool

Жыл бұрын

I concur

Can you explain the adjustments on the pins of the CROSS STOPS?

@sedgetool

Жыл бұрын

great idea for a video..thanks !!!

@georgebutler3rd

Жыл бұрын

@@sedgetool Yes, please! I was just last night looking at Festool's instructions that come with the cross stops, and I cannot figure it out. Ha, ha!

the light bulb in my head went off. how many stationary machine in the shop, will this system replace

@sedgetool

Жыл бұрын

GREAT point Tony !!!

If you have one tight, then what is the use of the loose ones, they cannot move anyways because of the tight one. What am I missing here?

@sedgetool

Ай бұрын

Ease of assembly ....

Hi Sedge You always make heavy pencil marks. How do you erase them afterwards (without sanding through sometimes extremely thin veneer)? Thanks very much and happy holiday season 🙂

@mikevyvyan7060

Жыл бұрын

Use an eraser before you pick up the sander. Worth the effort!

@ronthomas3029

Жыл бұрын

@@mikevyvyan7060 Isopropl Alcohol removes them easily

@mikevyvyan7060

Жыл бұрын

​@@ronthomas3029 Another good 'solution'. I frequently write on pieces of blue tape and stick on them the board or timber. That works for me.

@sedgetool

Жыл бұрын

I use lighter grit on a Festool sander

@timothycalderwood5695

Жыл бұрын

@@mikevyvyan7060 A white eraser works really well.

What size domino's were you using in this video

@sedgetool

Жыл бұрын

5x30

@wittworks

Жыл бұрын

5x28

why doesn't those 2 spacers come in metal. I'm not a user but I can see other makers. what can we do to capture part of the market back

@sedgetool

Жыл бұрын

????? do not know

how come the one i purchased in AU didn't have accessories?

@sedgetool

Жыл бұрын

you might have purchased the basic

@jchan0425

Жыл бұрын

@@sedgetool there is no kit options around the land of kangaroos

I am wondering, could you not make one board with all tight mortises and the second board with one tight mortise and the rest loose mortises and accomplish the same alignment.

@Mike--K

Жыл бұрын

If you used the cross stops for the mortises, with one edge on tight and the other edge with one tight and the rest loose, after a few mortise cuts none of the dominoes would line up on the loose board.

@SilverFox-1212

Жыл бұрын

@@Mike--K thanks

@sedgetool

Жыл бұрын

line up !!!

@georgebutler3rd

Жыл бұрын

@@Mike--K is right. Whatever you do to one side needs to be done the same way on the other side.

@chipsterb4946

8 ай бұрын

I had thought about cutting one tight on each end and then loose in the middle on both sides, but that defeats the ease of assembly objective.

Sad you didn't go over calibration and the elliptical adjustment mechanism on the plungers.

@sedgetool

Жыл бұрын

never needed to adjust them......

What does it do … besides make Domino holes? (And put drainage holes in my wife’s wood planters?)

@sedgetool

2 күн бұрын

hmmmmmmmmm

Why does the distance from left-pin-to-center differ from right-pin-to-center? Is it possible to calibrate? The problem is NOT with the centric plastic transparent ruler! When I cut the reference hole and then cut right and left holes with the same distance set on the “wing” ruler the actual distance between the holes differs by 1 millimetre 😱 I appreciate any help.

@sedgetool

2 ай бұрын

you can adjust the cross stops by loosening the hex screw on the stop and using a slotted screwdriver on the face adjust to be even by some trial and error....

@MichalCesek-qi8us

2 ай бұрын

@@sedgetool i’ve read that but I cannot turn it clock-wise nor counter. it’s very stiff and I don't want to strip the thread

@MichalCesek-qi8us

2 ай бұрын

@@sedgetool I finally made it. The magic is that the pin is eccentric and moves slightly off-center by turning it, right?

Black shirt guy is a toolbox

I have these items and was giving them a trial run on some sacrificial boards before I use the melamine. I was having some issues. I think they had to do with holding the machine flat. I wish I could explain what I was doing without typing for a lifetime but, I can't. There will be enough melamine for a few errors and then some on this small project. In the end if it works out then these items stay with the machine. If I end up with alignment issues (dominos to opposite piece which will be on top not end to end) I'm likely gonna file these things with the circle cutter and tape measure.🗑

@sedgetool

Жыл бұрын

sorry you are having frustration with this William....

Im pretty sure my Domino didnt come with these. How do I aquire after the fact😮!?

@sedgetool

4 ай бұрын

amzn.to/48iblS6

@Burritosarebetterthantacos

4 ай бұрын

@@sedgetool thanks👍

A BIG problem I have with these cross stops is that any tiny inaccuracy you have ends up multiplying and amplifying as you go down the board. For example if your left cross stop is miscalibrated from your right one, that measurement difference will drift and propagate down the line to larger and larger inaccuracies until no amount of wide mortise wiggle room will compensate and you end up destroying your work piece with misaligned mortises. Not worth it at all! Can you tell this is a lesson I learned the hard way?

@sedgetool

11 ай бұрын

you should calibrate your cross stops...

@SeattleMarc

11 ай бұрын

@@sedgetool you have to calibrate them EXACTLY. Any error will lead to drift. Too risky for me. Did this plastic thing come out of calibration from last time I used it? Etc. Also the DF500 comes with no calibration instructions, admittedly the 700 does. (Maybe a video idea ?)

@chipsterb4946

8 ай бұрын

@@sedgetooldo you mean check to make sure left X setting matches right X setting precisely? If so, what reference mark on the Domini do you use?

Honestly they could have done a lot better job on the cross stop design... They are kind of cheap, flimsy, etc...

@sedgetool

6 ай бұрын

ok