More progress on all the projects in the shop! Appreciate everyone coming back for another video!
Жүктеу.....
Пікірлер: 13
@bcbloc025 ай бұрын
The biggest disadvantage to twins everytime you change something rarely ever is the piping right.
@savagefabrication7955 ай бұрын
I didn’t know that about the gate styles being so different, killer video about race car stuff 😂 lol. And it’s exciting to see both the rigs going back together 🤜🤛
@jimmungai1938Ай бұрын
Remember when you put your coolant in the engine, you should always make sure you burp the air and I would recommend using the outlet on the very front of the head for the heater core that way you burp the air 100% this little jerk over on the other side of new Bethlehem PA ruined my Hamilton Cams head because he didn’t burp it Anyway it was a stage two had I still have it see about trying to weld in the cracks don’t know if I’ll be able to or not but anyway remember to burp that air and don’t rely on those two little holes on the thermostat you pull that hose off of the Front of the right six row Jim from Kennerdell PA
@jimb79225 ай бұрын
I've had similar experience with his products. Hope things get better in time.
@kellymichael73624 ай бұрын
Geno's has the original composite rubber design fan shroud cover, or splash shield. Part #DMTRK9193SS30. $15. Nice update video brother.
@christopherwebber11044 ай бұрын
Fab a shroud up, yeah might take a bit but would be nice and made by you, steel that is
@williamgilbert72625 ай бұрын
I think Charlie Pitcher has made some real nice aluminum fan shrouds. They're not on his website right now however..
@GavinHuke
5 ай бұрын
Yeah he did, I prefer to not burn myself is the only issue with those
@peterschmidt28495 ай бұрын
❤️🔥🇺🇸🔥🤙🏻
@smalltownroots41534 ай бұрын
Hi brett! Y'all need to sleep more...
@dbfabworks53205 ай бұрын
Good stuff!!!! Keep it up!
@kylekupiec83595 ай бұрын
intake horn is sick. how can i get my hands on one? thx
@GavinHuke
5 ай бұрын
It was polished by Pereas Polishing in Albuquerque New Mexico. Frank does all of my polishing work
Пікірлер: 13
The biggest disadvantage to twins everytime you change something rarely ever is the piping right.
I didn’t know that about the gate styles being so different, killer video about race car stuff 😂 lol. And it’s exciting to see both the rigs going back together 🤜🤛
Remember when you put your coolant in the engine, you should always make sure you burp the air and I would recommend using the outlet on the very front of the head for the heater core that way you burp the air 100% this little jerk over on the other side of new Bethlehem PA ruined my Hamilton Cams head because he didn’t burp it Anyway it was a stage two had I still have it see about trying to weld in the cracks don’t know if I’ll be able to or not but anyway remember to burp that air and don’t rely on those two little holes on the thermostat you pull that hose off of the Front of the right six row Jim from Kennerdell PA
I've had similar experience with his products. Hope things get better in time.
Geno's has the original composite rubber design fan shroud cover, or splash shield. Part #DMTRK9193SS30. $15. Nice update video brother.
Fab a shroud up, yeah might take a bit but would be nice and made by you, steel that is
I think Charlie Pitcher has made some real nice aluminum fan shrouds. They're not on his website right now however..
@GavinHuke
5 ай бұрын
Yeah he did, I prefer to not burn myself is the only issue with those
❤️🔥🇺🇸🔥🤙🏻
Hi brett! Y'all need to sleep more...
Good stuff!!!! Keep it up!
intake horn is sick. how can i get my hands on one? thx
@GavinHuke
5 ай бұрын
It was polished by Pereas Polishing in Albuquerque New Mexico. Frank does all of my polishing work