Great video. Real. Simple. And to the point.

@handydadtv

8 күн бұрын

Thanks so much 😊

FANTASTIC, easy to follow video!! THANKS!!

@handydadtv

3 күн бұрын

Glad it was helpful 👍🏻

Thank you so much for this video! The interior parts of my grill were literally rusted to the point of disintegration. But with your video, I had the confidence to replace all the interior parts myself and now the grill works better than it has in years!

@handydadtv

5 ай бұрын

And a lot cheaper than a new grill! Glad it was helpful 👍🏻

Great video Handydad. Clear and concise. Videos like your and others that get to the point are always appreciated. Thanks again!

@handydadtv

12 күн бұрын

Thanks so much 😊

Funny I found this video today. A neighbor a few blocks away left a 2 burner (E210) out at the curb. The guts were mostly gone, no grates, flavor bars, no drip tray and the burner tubes were partially rusted through. Ordered those parts from Amazon. I cleaned it up inside with some oven cleaner, left it to soak overnight, then hit it with the pressure washer. I paint-corrected the door and lid, then ceramic coated it. I removed the thermometer and Weber emblem, polished those up, too. It looks almost totally new and cost about $110 total to get working. The igniter wasn't functioning but that turned out to be a missing battery. We've cooked on it the past 3 nights and it has been flawless. This is a $450 grill so it's the neighbor's loss, I guess...

@handydadtv

Ай бұрын

Nice work! And the operative word is “work”. That’s something your neighbor was unwilling to do.

@adoss7273

Ай бұрын

@@handydadtv Thanks! More like it - I think a vast majority of people really have no idea how to fix things. It broken = just throw it away.

@handydadtv

Ай бұрын

@adoss7273 I hate the disposable mentality. You’re doing it right.

Thanks mate. This really helped me figure out how to take the old burners out. I now have nice new burners in my grill. Give it a run tonight.😊

@handydadtv

2 ай бұрын

Glad it was helpful 👍🏻

@weekendhomeprojects

2 ай бұрын

Did you get the same kit he got? I saw some reviews that they were too short. Did you have any issues? You got the e310?

@therealsprint

Ай бұрын

Unfortunately, I can't remove the screws of the burners because they don't have a real head anymore, they are rusted. Poor quality.

Thank you!!!! I had to loosen the front piece because my back bolts are just nice rusty gobs - but I did it!!! It works!

@handydadtv

4 ай бұрын

Glad it was helpful 👍🏻

Thank you. Because of this video I was able to complete the same setup very easy.

@handydadtv

Ай бұрын

Glad it was helpful 👍🏻

Thank you for making the repair installation so much easier, Chris! Went as per video, contrary screw & all, (yes I had one too)?! All the best, Rola (Oregon)

@handydadtv

Ай бұрын

Glad it was helpful 👍🏻

Wow that’s a alltimer free grab. Those grills are the best.

@handydadtv

11 ай бұрын

It’s over $600 new!

Thank you so much! I ordered the kit on your site and it worked perfectly. I have exactly that same grill so I was able to follow the instructions step-by-step as I watched the video. My husband was shocked when the very first time I turned it on it lit like a brand new grill! It took me a total of an hour and a half, and would’ve been less except for those pesky screws. Thank you for the comment about the back screws not really achieving anything because I could only take one of them out. But as you said they really are more like a brace. So for about $55 plus an hour and a half I saved us over $600 or more on a new grill!

@handydadtv

4 ай бұрын

Your husband is a lucky man. 👍🏻

@TheDrewski91

4 ай бұрын

He call's me his "Handy-wife". 😀@@handydadtv

Hey, very good video on the E 310 grill. I have the same grill and did basically the same thing except I did not need burner bars. Great grill and works great. Thanks

@handydadtv

Ай бұрын

Thanks for the comment.

Very helpful video. Thank You !!

@handydadtv

2 ай бұрын

Glad it was helpful 👍🏻

I am overhauling my 12 yr old Weber Spirit E-310 this weekend, too. I am replacing the burners and flavorizer bars as well and I JUST ordered the kit from uniflasy, too lol. My grill is different though, the burner controls are off to the righthand side of the grill. Thanks for this video it will come in super handy.

@handydadtv

4 ай бұрын

Glad it was helpful 👍🏻

@wackadizzle

2 ай бұрын

Any link for a video on that model?

@weekendhomeprojects

2 ай бұрын

Everything fit right? I'm about to do this too.

Hey Thanks. I looked for an hour on Weber's site and google to see how the igniter came off the tube. Cleaned burner tubes and ordered new.

@handydadtv

3 ай бұрын

Glad it was helpful 👍🏻

Nice job and instruction sir !

@handydadtv

9 күн бұрын

Glad it was helpful 👍🏻

Thank you! I have this but with the extra burner “sear zone”. Also worth upgrading to steel in the grates , the porecelin coated ones go bad after 2 years but you can call Weber and get free replacement with in 2 years on them and the flavorizer bars and burners. I got them but decided to just go all steel for grill, flavor isles and warming rack.

@handydadtv

Ай бұрын

Thanks for the tips!

Great video. I’ve cleaned those grates using vinegar, baking soda & dish soap. Let them soak for 2 hours then use a scrubber or a new wire brush attachment at the end of a drill.

@matthewlewis5631

11 ай бұрын

You would be better off skipping the baking soda. When you mix it and vinegar together they react so it looks like it’s doing something, but it’s just neutralizing the vinegar making it pretty pointless. Baking soda mixed into a slurry with water is good as a mild abrasive and deodorizer, but mixed with an acid (which vinegar is) is just a waste of both component.

@handydadtv

11 ай бұрын

Thanks for the tips

@saifahmed9906

11 ай бұрын

I’ll try it next time w/o the baking soda. Thankfully, haven’t needed to deep clean as I keep up after each use. Another idea I want to try is using a pressure washer.

Just a bit of advice. Run a bead of clear silicone along the bottom seem on the outside and inside cabinet where the lags attach to the bottom shelf. This grill has a tendency to rust there. Because water gets in the seem. Even with the cover (Weber cover) I found the rain will bounce back from the deck or patio. I have had mine since 2012 and had to replace the bottom once. But that’s the only down fall to this grill. I am a Weber fan for life.

@handydadtv

26 күн бұрын

Thanks for the tip

And thank you very much

@handydadtv

2 ай бұрын

My pleasure!

Put the grates in a garbage bag, spray them with oven cleaner. Let them sit in the sun for a day, then scrub with Scott pad and now you have clean grates

@handydadtv

11 ай бұрын

Good tip!

@728huey

5 ай бұрын

And after you do that, you can re-season the cast iron grill by lightly covering the grate with vegetable oil and grill it covered for about an hour.

Nice video! From my experience, I would never want stainless steel grates -- they will rust just as fast as if they were carbon steel. I give the cast iron grates on my Spirit grill a quick scrub with a piece of Scotch Bright pad before I cook, and they're good to go.

@handydadtv

11 ай бұрын

Thanks for the tip!

@mayito714

2 ай бұрын

Thats not my experience on the Florida beach.

I did the exact same thing a few years ago, but it was a Genesis 300 that my neighbor left out. Everything is working great now, minus the igniter. The assembly is in a little metal box, and it’s completely rusted to the grill body. I tried and tried, but couldn’t get it off. I just use a long stick lighter to light the thing.

@handydadtv

11 ай бұрын

I guess I should be happy this one’s plastic. They don’t last long either way.

The burners don’t look so bad. Some steel wool or a wire brush/drill attachment might have cleaned those up. I see your point though - why not start with new elements. Thanks for sharing.

@handydadtv

11 ай бұрын

The kit really wasn’t expensive and I wanted to start fresh.

Those burners had 8 years left in them. A couple times a year I just take a small wire brush and clean off any rust or anything else that may be encroaching on the holes of the burners where the gas comes out. Runs perfect after.

@handydadtv

15 күн бұрын

Thanks

Cleaning grill plates: Warm the plates for a few minutes, then spray with straight vinegar. Allow to soak for several minutes. Ball up a fair size wad of aluminum foil and rub the grates like it was a scrubber. It scrapes all surfaces, including between the rungs. Do both sides and they look like new.👍

@handydadtv

3 ай бұрын

Good tip!

Did my Weber today and had to use vice grips on the same screw.

@handydadtv

10 ай бұрын

Interesting. Same issue.

I was hoping to avoid taking the front panel apart but I couldn’t get those 3 bolts out that hold the burner tubes down in the back… tubes could slide out toward the front,.. had to pull manifold back to get new burners in

@handydadtv

4 ай бұрын

Yup

Can anyone please tell me what size screws hold the burner tubes to the frame? My kit didn’t come with any and my old ones are shot to hell

@handydadtv

17 күн бұрын

Sorry I don’t know.

I need to buy this kit what reference ist for the sen grill please

@handydadtv

2 ай бұрын

Link in description

If I just want to replace the burners, do I need to take off the knobs and front cover?

@handydadtv

4 ай бұрын

I don’t think there’s enough room to remove the burners without retracting the valves, which is done from the front.

@joerutkowsky3261

26 күн бұрын

No you don’t have to take the front panel off Just undo the back bolts on the burners may have to use vice grip on them they get covered in cunk. Then you can slide the back small ignition burner out from the left and right burner. And lift and slide them out and the middle one will do the same. So easy.

When ordering I see there’s different sizes to choose from like 3.5 or 2.6 what measurement is that for?

@handydadtv

3 ай бұрын

Not sure. Spacing?

@carpentrylover145

3 ай бұрын

@@handydadtv Not sure either. Was hoping you knew😆

@UnknownUser_0000

2 ай бұрын

Depends on your model of grill? There is different spacing for the 200 & 300 series. It's in the Amazon description.

I have a small Weber grill and I have to replace the igniter

@handydadtv

2 ай бұрын

That’s very typical. Not hard.

The screws holding in my burner tubes are so rusty I can’t get them out!

@handydadtv

2 ай бұрын

You may not need to remove them completely. I discovered they don’t need to be tight.

Also had a neighbor that gave me the bigger Weber Genesis II that she had bought for her now kicked out ex boyfriend 😂😂😂. My wife asked why I expected it. I told her a free nearly $1100 grill??? Why the hell wouldn’t I. 😂😂😂

@handydadtv

3 ай бұрын

Outstanding! 👍🏻

Surprised you didn’t check the battery in the igniter before replacing it.

@handydadtv

11 ай бұрын

Of course I tried that.

I have put my grills into my oven and ran a self clean.

@handydadtv

11 ай бұрын

That’s a good idea. But I brought new ones for $38.

I thought stainless steel did not rust?

@matthewlewis5631

11 ай бұрын

It is rust resistant but not rust proof. And applying heat (such as in a BBQ) helps speed up the oxidizing process.

@handydadtv

11 ай бұрын

Yeah nothing lasts forever.

cover the grates with aluminum foil and put the grill on 500

@handydadtv

3 ай бұрын

Thanks for the tip