I've been waiting for this! Now just until the next episode !

@Mechanic_kid

3 жыл бұрын

Coming this weekend👍🏼

nice and easy.

I have a 1980 1.6 EL engine is this the k724 or K624 kit

Great video! But I did not see the first gasket that goes under the heat shield in the kit you got? Where did you get it? Also what do you do with all the other vacuum lines? Do you have a video of how it ran after?

I have a 1984 honda city 1.2 NA carb, how can i add webber to it, thanks

Hell yeah, slap that puppy in there!

I look around and find no love for the Hitach DCG-306 I saw you tearing apart in an older video. I swapped one onto my Geo metro converting it from TBI and electrical problems to carb and vacuum/centrifugal distributor.

Where's pt.2?

What advantage do you get with replacing the carburetor with a Weber?

It looks the auxiliary port covered up by the gaskets. Does that setup block off the pre-chamber intake? If it does how does it affect fuel economy

@Mechanic_kid

2 жыл бұрын

No it still feeds fuel down into the third chamber which is what’s unique about the CVCC

How did you get the bolts out? it looks easy in your video. I'm using the same pliers and I cant get it to turn at all

@Mechanic_kid

Жыл бұрын

I used some vice grips and got them on super tight. If that doesn’t work KZread “double nut method stud remover”. And if that doesn’t work i’m pretty sure they make a stud remover tool. Best of luck👍🏼

@dandrechesterfield5411

Жыл бұрын

@@Mechanic_kid unfortunately i tried your plier method first and it stripped the threads so now I can't get a nut back on to try the double nut method

@Mechanic_kid

Жыл бұрын

@@dandrechesterfield5411 Damn. Get a die set and cut new threads

@dandrechesterfield5411

Жыл бұрын

@@Mechanic_kid I might just go get one of those stud removers and do that since I don’t need the bolt for the weber

We have 2 1976 c ccs do you have video for electrical wiring harness?

@Mechanic_kid

26 күн бұрын

No. But join the First Gen Cvcc Facebook group page. Someone can help you

Hey I just got my Weber kit and I was wondering on a cvcc 77 I have 2 ports on distributor. Do I plug one? What happened to cvcc timing video?

@gonzaloverduzco8328

2 жыл бұрын

Also did you leave all vacuum lines? Connected to the “black box”?

@Mechanic_kid

2 жыл бұрын

@@gonzaloverduzco8328 remove the black box! To start off just block off all the vacuum ports and you should be able to get it started. Later you could hoop up the vacuums line to the distributor for vacuum advance. But start with just getting it running.

@Mechanic_kid

2 жыл бұрын

I forgot to film a video on timing, and sold my cvcc. Im sure the timing is fine. Try to get it to start after installing the weber. If it spits and sputters and backfires but won't stay running, loosen up the distributor and rotate it a little and try again. If it has not power and running poorly, your static timing is probably off and need to re adjust your timing belt... Best of luck👍

@gonzaloverduzco8328

2 жыл бұрын

@@Mechanic_kid thank you. I’m a small block Chevy guy. So watching your vids has helped me learn about this little future daily driver.

@Mechanic_kid

2 жыл бұрын

@@gonzaloverduzco8328 yep no problem! Let me know how it goes👍🏼