I thought there's 2 kind of machinists, those who think vernier calipers are pretty much all you'll need and those who think calipers are waste of money because you need set of micrometers anyway. I see player 3 has entered the game.

@delta3eight

Жыл бұрын

You forgot player 4. The tape measure.

@vizanonn1728

Жыл бұрын

​@@delta3eight yer fired.

@delta3eight

Жыл бұрын

@@vizanonn1728 I see you can’t handle the fatmax.

@topiuusi-seppa5277

Жыл бұрын

​@@delta3eight they're the ones manufacturing consumer goods that are marketed as aerospace grade? 😆

@delta3eight

Жыл бұрын

@@topiuusi-seppa5277 HAHA yes spot on

My lathe starts to chatter just by the look of an 1mm parting insert...

@nickcautrell2514

Жыл бұрын

You too huh? I ended up making a guide for the tool holder and I use my porta band instead.

@pvtimberfaller

Жыл бұрын

What size/make/age is your machine?

@shyams2000

Жыл бұрын

Same

@rodsgeneticts716

Жыл бұрын

Same here man mine would chatter so hard it would be looking like it was an earthquake and the machine had parkinson's

@yak-machining

Жыл бұрын

@@pvtimberfaller 2m long and from 1919, so not the best condition

а нахрена переводить на стружку 10мм? ну возьми отрезной резец поуже. экономика должна быть экономной

@Aluminumk

Жыл бұрын

Или вообще ленточной распилить, а потом при надобности вывести плоскость

@user-tk9to8dm4b

Жыл бұрын

Это показ возможности резца, а так вырезать пазик пойдёт

@EvgeniyWorld

Жыл бұрын

@@user-tk9to8dm4b какая тут возможность? Открываешь каталог того же taegutec и офигеваешь от возможностей.

@user-ke3jw1ys1k

Жыл бұрын

Тогда уж сразу взять нажовку по металлу😂

@EvgeniyWorld

Жыл бұрын

@@user-ke3jw1ys1k есть пилы на производстве промышленные ленточные.

I'm not a machinist, I'll admit that, but why did you need to remove that much material just to cut off a piece of stock?

@lancepage1914

Жыл бұрын

Just for the sake of demonstration. Typically cutting fluid is used, but this was a dry run as well.

@valentin7054

Жыл бұрын

Very overkill, but as far as i know you should use a wider insert the bigger diameter you are going to part off

@user-cm8vt5nw7f

Жыл бұрын

الكثير ربما لم يفهم المغزي من هذه السكين، لكن في الحقيقة هذه سكين مهمة جدا وخصوصا اذا كنت تريد قطع اقراص متساوية من الاستيل بمقاس 10 ملي او 30 او40 ملي فهي مثالية بدقة القطع مع التشذيب بآن واحد.. انا احتاج الي واحدة من هذه.

@ericmartin7127

Жыл бұрын

That's what I'm thinking

@jezalpetes594

11 ай бұрын

I definitely agree,b'cuz that's just too much material wasted,I wouldn't like it either.And if,I were the customer,I'd be wondering who is gonna pay for that material, if it comes-up short on the # count

Your scrap is a bit high! You cut with a 10mm blade to get a 10mm piece😅

@TungaloyCorporation

Жыл бұрын

Thank you for your comment!

@ranadip111286

Жыл бұрын

The wastage is huge..

@MikeG.666

Жыл бұрын

Thought the same thing. A bit overkill.

@NoLyinEvry1sDyin

Жыл бұрын

Quality Speed Cost usually you only get to pick 2. This might change that in certain situations? I'm clueless tho

@Whichwaydidtheygo

Жыл бұрын

Huge markup no need

I feel like machine weight should also be included in the parameters of demo cuts 😂

@perfectstranger1152

Жыл бұрын

These are some stout, heavy machines to absorb the vibrations of that cutter

@jerryjantola

Жыл бұрын

That's no moon...

@dilligafmofo5921

Жыл бұрын

​@perfectstranger1152 That's a pretty aggressive rake and chip breaker on the insert. I would like to see the finish if it was used to cut a groove as opposed to showing a parting operation.

@perfectstranger1152

Жыл бұрын

@@dilligafmofo5921 same

@burnheretic3950

Жыл бұрын

​@@dilligafmofo5921 yeah makes no sense to use for parting. that would be alot of lost material in chips. Would like to see it cut a deep wide shoulder or something.

My favorite part of this video is how he didn’t get a 10 foot pipe to tighten the screw. If I had a dollar for every time I had to get a stripped screw out…

@bredeabrahamsen

Жыл бұрын

Use a torque screwdriver. That's what we used when making plane engine parts

@Arzon527

Жыл бұрын

​@@bredeabrahamsen I thought electric screwdrivers were a waste until my apprenticeship. I'm seriously thinking about it now, with all the stuff I have to do. 99% of what I tighten just needs to be snug.

@MrDudetheassassin

Жыл бұрын

Oh my god yes! When ever I’m taking a job down the screws are stupid tight! What is it with Machinists and tightening down with all there might!

@RyTrapp0

Жыл бұрын

@@MrDudetheassassin Maybe the fear of flying parts causes a lot of them to just over tighten EVERYTHING outta habit lol

@jade4781

Жыл бұрын

​@@MrDudetheassassinVibration bad, tight good

Measure it with a mic, mark it with chalk, cut it with an axe!

I need to tag cutting edge engineering

@dolphlundgren2820

Жыл бұрын

Nice, I watch that Aussie as well lol his blue nose is super cute.

素晴らしい超硬チップだ… クーラント無しでこのツヤツヤ切削面… これは切削が絶対楽しくなるやつですな

@TungaloyCorporation

Жыл бұрын

最高の褒め言葉ありがとうございます！ 一社員ですが、これだけしっかり重切削出来る工具を開発、製造、販売しているチームタンガロイを誇りに思います！

Выгоднее ленточной пилой отрезать и потом выровнять уже на токарке. А так, сколько металла просто в расход

@donzone1641

Жыл бұрын

This is about how crazy that cutting tip, not about wasted material, how precise he cut and measure, or else

@user-vd3jd8pd7w

Жыл бұрын

​@@donzone1641 это был комментарий от русского человека😄 тебе не понять, что русские, после обработки детали, дорабатывают всё напильником😂 и, такие понятия как допуски для них, не более чем условности😂 иначе как ты объяснишь безотказность всей линейки автоматов АК😂 короче говоря, чтоб ты понимал: у русских, на кухне есть специально отведенное место в промежутке между холодильником и стеной для пакета из супермаркета, в котором они хранят множество других таких же пакетов, которые заранее выстираны, высушены и аккуратно сложены...а теперь угадай, для чего они это делают?!🤔

@TungaloyCorporation

Жыл бұрын

Это просто рабочая демонстрация Вставки, инструменты, стружка, рабочие материалы и т. д. Мы максимально утилизируем.

@Romgenas

7 ай бұрын

@@user-vd3jd8pd7w У англиков тоже пакеты в пакетах... Так что хавальник свой завали

@Romgenas

7 ай бұрын

Эт точно

Let us see those chips!

@TungaloyCorporation

Жыл бұрын

Thanks comment!

@Faruzan420

Жыл бұрын

I want to eat them

@Loneman_OG

Жыл бұрын

@@Faruzan420 Mmmm, forbidden chips. 🤤

The video looped like 5 times, before I realized I was watching a repeat of the same clip. And by the 4th time, I'm like, "Why does have to change the tool each time?"

That’s impressive parting! Sometimes, though… “Parting can be such sweet sorrow”!😮

クーラント無しはいつ見ても心臓に悪い

@TungaloyCorporation

Жыл бұрын

コメントありがとうございます！ 加工中はドキドキでした。音が凄かったです！

@user-te4mn6hf1x

Жыл бұрын

チップがデカくて内径がが歪みそうですw

@TungaloyCorporation

Жыл бұрын

@@user-te4mn6hf1x 加工中も凄い音してますが、ブレーカーが良く効いているので加工自体は安定しております！

@user-bv2qk4jd4s

Жыл бұрын

技術の進化だと思います。

@user-sc5yk9jm5p

Жыл бұрын

​@@user-bv2qk4jd4s Это плохая экономия, согнать много метала в стружку

切削音と切り粉がタケノコみたいになる凄い‼️音が軽やか‼️昔ここまで切り込み入れるとキーキーキーキーと唸り切削面削り痕がうっすら残った❗凄い切れ味表面がキレイに輝いている😊凄い技術ですね‼️

@TungaloyCorporation

Жыл бұрын

コメントありがとうございます！そう言って頂けて嬉しいです！インサートにブレーカーが付いていて、切屑処理が抜群でございます。推奨の切削油を使用して加工頂ければ、性能、寿命、面品位もさらに向上致します！

We have two of these (left and right hand) with 10mm inserts. We use them for deep grooving in stainless forgings.

@TungaloyCorporation

Жыл бұрын

Thank you for your comment! Thank you for using our products. How does it feel to use?

I'd use the band saw lol

@upyrlihoj

Жыл бұрын

Самое правильное решение!!! На видео получается, что больше половины металла уходит в стружку!((((

@Gottenhimfella

Жыл бұрын

I'd use a cold saw.

@ralanham76

Жыл бұрын

What's the name of the band ? Cutting Crew ?

@jezalpetes594

11 ай бұрын

Good move

You know i never get tired of watching these, the best ones are the more complex machining

@TungaloyCorporation

7 ай бұрын

Thank you for liking it!

Looked perfectly fine to me. “Too intense” my ***.

10mm cutter to make 10mm cookie.

What's the point in measuring the piece? We're here for 10 mm groove!

@TungaloyCorporation

Жыл бұрын

This is a demonstration that even heavy cutting can be processed without problems!

I noticed the feed was too fast on that particular insert.

Feeling the groove!

@TungaloyCorporation

Жыл бұрын

Thanks comment!

Охуенно, 10мм - заготовка, 10мм - стружка. Э - экономичность

@TungaloyCorporation

Жыл бұрын

Это просто рабочая демонстрация Вставки, инструменты, стружка, рабочие материалы и т. д. Мы максимально утилизируем.

@user-ky8cy2vw9v

8 ай бұрын

отрезным 5 мм глубиной больше 40 мм не залезешь. может 45 максимум.

最後のスケールの出てくる勢いwww

@TungaloyCorporation

Жыл бұрын

コメントありがとうございます！ そこだけで5テイクぐらい撮りました。w

These videos are so satisfying

@TungaloyCorporation

3 ай бұрын

Thank you for liking it!

Круто! Отрезал заготовку 10 мм и ещё 10 мм перевёл в стружку 😂

@TungaloyCorporation

Жыл бұрын

спасибо! Я был бы счастлив, если бы вы могли так сказать

Certainly that spindle has nice torque characteristics..

@TungaloyCorporation

Жыл бұрын

Thank you for your interest!

Was this released on 1st April . 10mm parting tool to produce a 10mm wide product, thats a load of waist

That's sick!

The biggest grooving tool that I have is 8mm, but I would love to try that one.

@pvtimberfaller

Жыл бұрын

They should comp you one.

@TungaloyCorporation

Жыл бұрын

Thank you for your interest! We have a lineup up to 25 mm, and if it is a special product, we can process a higher area. tungaloy.com/product/grooving/tungheavygroove/

That is an insanely thick parting tool, it seems like a lot of wasted material there

@Gottenhimfella

Жыл бұрын

It's a grooving tool. Not intended for parting, this was a stunt.

I am always impressed by your demonstration, but also please stay safe, amazing tools mate.

@TungaloyCorporation

Жыл бұрын

Thank you for watching the video! And thank you for your concern! We will continue to do our best to provide better movie!

Much better than the last short

You can see how the shavings go from silver to yellowish to blue. The amount of friction...

@jarvislarson6864

Жыл бұрын

Incremental buildup

@jarvislarson6864

Жыл бұрын

Water jet and diamond wire machining are on their way up

Это если надо 100 шт нарезать, то метр в стружку уйдёт?

Those spiral shreds are a form of art by themselves

@TungaloyCorporation

6 ай бұрын

Thank you for your interest!

Nice groove

@TungaloyCorporation

6 ай бұрын

Thank you for the best compliment!

Funny how unconcentric the center bore was... lol

@gitar1hero1qaz

Жыл бұрын

Eggcentric

@thisisyourcaptainspeaking2259

Жыл бұрын

Just keep cutting.

@shonuff4951

6 ай бұрын

Definitely was not bored... That's stock material.

How did that bit not start to glow?

@FireGodSpeed

Жыл бұрын

Carbide??..

@TungaloyCorporation

Жыл бұрын

The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

Nice work! I had the privilege of working for GE developing 40 Watt Plasma Rifles back in the 80’s. We reached out to Mitsubishi Electric to develop some of the early PCBN machining tools. This also solved the ionic transfer problems and short tool life using HPP carbides in the beginning. The budget was not a factor back then so these inventions could happen.

@TungaloyCorporation

Жыл бұрын

Thank you for your interest!

I'd like to see the cutoff surface of the finished piece

Peelin Steel ❤

@TungaloyCorporation

Жыл бұрын

Thank you for watching the video!

But why 😅? Use 3 mm and you get more Discs

@PappSaTT

Жыл бұрын

You are totally right! I think its only for demonstration.

@endurofan9854

Жыл бұрын

same here, it seems like he just want to demonstrate the quality of their product, a grooving tool that can withstand cutting all the way means it perfectly made, but i think its not just about the blade but the holder too

@Kspice9000

Жыл бұрын

​@enduro fan that would make sense but a better demo would have remove material along the X.

Токарь с линейкой, это не токарь 😅

The focus is quite professional.

@TungaloyCorporation

9 ай бұрын

Thank you for your comment!

Hmmm no milk

@TungaloyCorporation

Жыл бұрын

Yes, no coolant!

Why would you ever use that for parting 😂 someone missed the memo

@mymusicmen13

Жыл бұрын

the point is to show sturdiness under extreme circumstances. to prove how it'll easily do well under normal conditions and for a long time too. you must think you're so smart.

@Spurioushamster

Жыл бұрын

​@@mymusicmen13I think he's wondering why you would ever want a 10mm kerf, when a narrower tool will work just as well and waste less material.

@D3nn1s

Жыл бұрын

​@@Spurioushamsterprobably not meant for parting, could be need for grooves or mb to seperate welded parts faster

@blacklabel6223

Жыл бұрын

It’s just a demo to show it off a bit. You’d use this for deep grooving

@timrlang159

Жыл бұрын

Pay rate must be on a per pound of shavings basis.

Absolutely amazing.. I'd imagine that insert has to have very good Thermal Conductivity to carry insane amounts of heat away from cutting edge

@TungaloyCorporation

Жыл бұрын

The breaker on the cutting edge works well, Chips are handled very smoothly! They are also more effective and last longer if coolant is used.

The chips at the start remind me of a cinnamon breakfast cereal 😂😋

@TungaloyCorporation

6 ай бұрын

Beautiful curl-shaped chips are proof of stable machining.

Un corte que desperdicia un 110% de material....... No parece redituable

@TungaloyCorporation

Жыл бұрын

Esto es solo una demostración de mecanizado. Insertos, herramientas, virutas, materiales de trabajo, etc. Reciclamos tanto como sea posible.

Вот он офигенно точно отрезал и измерил результат линейкой. Подарите ему штанген, пусть. Ещё один видос снимет, как он офигительно умеет им мерить.

@user-mz7wj8vq4g

Жыл бұрын

ты точно понял суть видео?

@TungaloyCorporation

Жыл бұрын

Спасибо за ваш комментарий

How many pounds of force does the cutting bit exert on the piece it’s cutting?

何時見ても超硬バイトの切削は惚れ惚れする

@TungaloyCorporation

6 ай бұрын

こういった加工シーン、いいですよね！

Это же глупо😂. Потеря металла огромная

@user-wq1pp5vz3b

Жыл бұрын

Просто это дорогая игрушка...

@TungaloyCorporation

Жыл бұрын

Это просто рабочая демонстрация Вставки, инструменты, стружка, рабочие материалы и т. д. Мы максимально утилизируем.

And a dry cut at that!!! I’m sure you were sweating 😅!

@doug7709

Жыл бұрын

It was only 1045 (c45 is the grade written on it) so not really amazing at all. Show me the same thing in inconel or P550 I work with and I'd be impressed. The way it broke a chip in soft material is above average though, and also the high feed rate is for that reason exactly, the right chip thickness so it breaks not strings.

@TungaloyCorporation

Жыл бұрын

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

Play that funky music wide-boy

Cortou manteiga! Ferramentas de excelência fazem diferença absurdamente!

That was nuts

@TungaloyCorporation

Жыл бұрын

Thank you for your comment!

10ｍｍ、15ｍｍと同商品を使っていますが、高圧クーラントと相性が良く、動画で一瞬出てくる長いキリコは出てきません。 供給の配管が他社と同じΦ6だと嬉しいのですが。。 Φ4.8はマニアック

@TungaloyCorporation

Жыл бұрын

弊社製品をご利用頂きありがとうございます！ また、使用後のフィードバックまで頂きましてありがとうございます！ 供給配管の件、しっかり伝えさせて頂きます。 もし、工具で不具合、改善したいなどございましたら我々にお任せください！

Ну и зачем такой толстый резец? Так много в отход ушло.

@maiklmaikl4894

Жыл бұрын

..тоньше резцы не пройдут такую глубину ...там нет такого крепления пластины...

@EvgeniyWorld

Жыл бұрын

@@maiklmaikl4894 хз, зрительно вроде но толсто кажется

@EvgeniyWorld

Жыл бұрын

@@maiklmaikl4894 отрезные есть до 30мм. Там толщина 2мм.

@EvgeniyWorld

Жыл бұрын

@@maiklmaikl4894 открой каталог taegutec там есть лезвия с вставными пластинами там ширина 3мм отрезает 50мм. Но для них нужен держатель специальный.

Where can I get that chuck?!? I can't believe it didn't pull that right out of that chuck the second it hit that material!! 🤯🤯

Man, you guys have such cool toys!!!! Meanwhile, i'm over here with my home made CNC, saving up for a1/2" thick x 36" x36" aluminum plate so i can make better fixturing.

@TungaloyCorporation

Жыл бұрын

Thank you for your comment!

Una macchina a controllo numerico che misure è con il righello 😂😂😂😂

@TungaloyCorporation

Жыл бұрын

Grazie per aver guardato il video

Is this how they make wheel spacers?

@hjalar

Жыл бұрын

No

@TungaloyCorporation

Жыл бұрын

Here is a machining demonstration!

Tungsten and carbide. Once upon a Time there was a ship whose job it was to cut a Soviet submarine in pieces and bring it to the surface.

Ok, so how much u material u wasted to get that pc out with that insert?😅

@TungaloyCorporation

Жыл бұрын

Thank you for your valuable opinion. This time it's a machining demonstration. We recycle inserts, tools, work materials, shavings, etc. where possible!

очень широкий резец много теряете в отрезке

@Theogen

Жыл бұрын

Может их цель не резать,а добывать стружку?иначе я не понимаю почему резец шире,чем срезанная часть😁

@kotkop3017

Жыл бұрын

По идее он хорош для канавок .

@tartarari1

Жыл бұрын

И замер линейкой. Что за пиздец)))) Лучше только рулеткой) Где, мать их, штангенциркуль?))

и 10 мм в стружку ...

@TungaloyCorporation

Жыл бұрын

Спасибо за ваш комментарий

@al.march.7457

Жыл бұрын

не переживайте! они обещают собирать стружку ! будут собирать и отдельно утилизировать!! хахахахахаха!!!

Fantastic!!!

@TungaloyCorporation

Жыл бұрын

Thank you for your interest!

Steelin peel

What is that feed per tooth??? Crazy stuff

@cyber2526

Жыл бұрын

.25 mm per rev its in the description

@TungaloyCorporation

Жыл бұрын

Thank you for your comment!

Heavily moded one of these to do a 6.5 inch deep face groove. Went from a 2hour mill run to a 12 min lathe run. It's a tough tool.

I showed this video to my mini lathe and it started crying.

@TungaloyCorporation

7 ай бұрын

Thank you for your comment! Are you a machinist?

@tahustvedt

7 ай бұрын

@@TungaloyCorporationJust as a hobby.

Epic

@TungaloyCorporation

Жыл бұрын

Thanks comment!

Ottima misurazione sarete sicuramente precisi😢

@TungaloyCorporation

Жыл бұрын

Grazie per il tuo commento!

Interessante il sistema di bloccaggio inserto vorrei vederlo meglio

Working on the delay line of the Paranal telescopes, we achieved below 10 nm precision over a distance of up to 60m.

@TungaloyCorporation

9 ай бұрын

Thank you for watching the video!

Hopefully that I.D. didn't matter when you cut that washer off cause it was way out.

@untitled2792

Жыл бұрын

It was probably just for demonstration

@blacklabel6223

Жыл бұрын

It’s a grooving tool, they’re just showing off. ID wouldn’t matter in real application. Just a visual show here

@TungaloyCorporation

Жыл бұрын

Here is a working demonstration. This time, we hope that you will see how the chip breaker is effective even in dry and hard cutting, and that the chip evacuation is good.

削りかす触ってみたい、（手切れそう）

@TungaloyCorporation

Жыл бұрын

手が切れますし、加工直後は大変熱いです。 冷えると可愛いですよ！

@kyosuu_maginary

Жыл бұрын

@@TungaloyCorporation 面白いですね！

I mean I get that you are going to run the tool upside down so the tool pressure is pushing on the carriage instead of pulling, but at least use a left hand tool so it doesn’t look like a complete amateur set it up?

Отходов больше от такого отреза.

Part off 10mm by wasting 10mm of metal, well done lol

@TungaloyCorporation

Жыл бұрын

This is just a working demo Inserts, tools, chips, working materials, etc. We recycle as much as possible.

Why so much stock wasted. While parting…

@kphpromecanica2391

Жыл бұрын

It's just for KZread man

@mwip972

Жыл бұрын

ah yes, another people who don't understand demo

@Wip-ls6ns

Жыл бұрын

In video description said it's a groving tool, so it will remove more material faster for large grove, and they just show the capability of the tool can do for parting

@TungaloyCorporation

Жыл бұрын

Thank you for watching the video. Inserts, tools, chips, work materials, etc. We are recycling as much as possible.

Too intense is when my lathe starts chattering under a heavy cut because its not rigid enough… The most intense time happened so fast it could not be stopped. Chatter on a grooving tool made the tool dig in then rip out of the tool holder and shoot across the room. I should note this machine is not modern and has no guards.

@TungaloyCorporation

Жыл бұрын

Thank you for your valuable opinion. Be very careful when working.

Great carbide ❤❤

@TungaloyCorporation

Жыл бұрын

Thank you for the best compliment!

ドキドキヒヤヒヤする突っ切り加工でした。 突っ切り落としは2,3mm幅で二次加工しています。😂

@TungaloyCorporation

3 ай бұрын

おっしゃる通り、ヒヤヒヤでした。 通常は2.3mmですよね！ 我々メーカーとしては、加工が出来るというのは当たり前で、 だからこそ、お客様が普段やらないような加工で工具のPRができれば良いなと思っています。

Wow, that removed a lot of metal VERY quickly!!

@TungaloyCorporation

Жыл бұрын

Thank you for your interest!

Why waste so much stock? Unless you need the clearance for chip evacuation I don't understand why...

Ale otwór wali!🤯

@TungaloyCorporation

Жыл бұрын

Dziękujemy za obejrzenie filmu!

Gloves on a lathe? Why?

That was cool 😎

@TungaloyCorporation

Жыл бұрын

Thanks good comment!

The bit is made of material that can scratch Superman

I’m a very very entry level operator I run a tx7 anca machining/grinding is super dope

@TungaloyCorporation

7 ай бұрын

Thank you for watching the video!

Доказательство что современные резцы лучше советских !

ステキな、ステッキですね😊

@TungaloyCorporation

Жыл бұрын

素敵なコメントありがとうございます☺

今時の突切りバイト凄い❗️

@TungaloyCorporation

Жыл бұрын

お褒めのお言葉ありがとうございます！ そう言って頂けますと大変嬉しいです！

when i saw the video for the first time i gambled but there was no sound and i was really surprised to see no cooling and that the tool stayed in one piece❤😂

@TungaloyCorporation

Жыл бұрын

Thank you for the best compliment!

Wow.. what a strong bit... My god

@TungaloyCorporation

Жыл бұрын

Thank you for your interest!