As much as I love Florida content it's always very nostalgic to see the PFI and Boostedboiz working together

@cj393

Жыл бұрын

Brent needs to move to Florida.

@pmmartinpmjm

Жыл бұрын

Feels like home.

@qxtankxp

Жыл бұрын

Together*

@CosmicMystery7

Жыл бұрын

@@cj393 Doubt that will happen. His entire life and family is in Colorado. Besides, Florida has tons of performance shops all over the place. PFI has a great market in the Denver area without a ton of competition. If he's anything like me, the heat, tourists, urban sprawl, and flatness of Florida makes it intolerable long-term.

@jhonnyfolhas

Жыл бұрын

For sure

MAKE SURE IT CAME WITH THE UPGRADED ARP BOLTS THAT BOLTS THROUGH THE VTEC SOLENOID THAT HOLDS THE MAIN BRACKET OF THE SUPERCHARGER BECAUSE THE OLDER STYLE HARDWARE BREAK AFTER TIME

@strawbemily3182

Жыл бұрын

bumping this bc its important they see this

@SlowSTEN

Жыл бұрын

you'd thinking these guys would know this after owning a "few" high horse Honda's, not saying your comment isn't valid but im sure they know.

@strawbemily3182

Жыл бұрын

@@SlowSTEN well they've never done a supercharger before and the bolts in question are specific to this kit

@_Professor_Oak

Жыл бұрын

oop

@rgreerjr

Жыл бұрын

@@SlowSTEN yeah i doubt they know

I love seeing Jamies mischievious smile while holding the nitrous bottle. Shit had me dying

I love Wyatt how he grabbed the instructions and said let me help you with that.😂💯🔧🚗🏁®

Please start putting more bloopers at the end like that. 😂😂😂

@-Who.Knows-

Жыл бұрын

Or make a monthly spot at the end of a video with your most ridiculous slip ups 😂😂

@JDMLosC

Жыл бұрын

That would deff b a great idea seeing the bloopers! 😂😂

@kylefitzherbert9381

Жыл бұрын

I love when people throw in good bloopers.

Holy shit Kyle's doing a build with a full exhaust. That's rare.😂😂😂

The rotrex kit is probably one of the better options for someone wanting to keep the rest of the car stock.

Love the bloopers at the end. Please keep adding them!

Should do a blooper reel after episodes. Not all. But some. It gives a finer look at what content creators deal with/all the video content that don’t make it to the episode normally.

Upgrade the retainer/keeper to the AP2 f22c1s or even titanium ones. The stock f20c ones are known to fail and potentially drop a valve because of the higher revving. Planning on doing this on the long run for my girls s2k so just dropping my 2 cents into this 🙌🏼🙌🏼

At that elevation, i think everyone was super surprised at those stock numbers

@Matty.Hill_87

Жыл бұрын

I hadn't even considered that, thise numbers were crazy when you actually think about it

@hmmhuh12

Жыл бұрын

@@Matty.Hill_87 yea, when you see LHT do dyno runs on stock S2's, they are in the Florida, but then again they are in Florida, where the humidity is high and its always hot, and they get around 205. Kinda wanna see hp rating at pfi and then see how much more hp it would be at sea level

@Hman9876

Жыл бұрын

Pretty sure Brents dyno is atmospherically adjusted. It reports what the engine would be making at sea level.

@Matty.Hill_87

Жыл бұрын

@@Hman9876 is that a thing? I never knew that was possible

@hmmhuh12

Жыл бұрын

@@Hman9876 I don't so. If it was, don't think he would have been that surprised

s2k is going crazy! love to see it. love the little bloopers at the end as well. keep up the good work boiz

badass exhaust and super nice supercharger kit, yall are really doing this one right! Painting the valve cover would help a ton with the engine bay looks too

@wheelietime7062

Жыл бұрын

I miss the leopard print one on the angry panda Aka mr2

Should've got James out there to control the nitrous, could've taught Jamie how to get the big results 😂😂

@Matty.Hill_87

Жыл бұрын

James would have sent a Honda piston to the space station 😂😂

@That_Lancer_Guy

Жыл бұрын

@@Matty.Hill_87 hahaha yea too true

Best video I've seen from you guys in a long time. I've been watching for 4 years or so... Keep up the great content guys!

The bloopers at the end had dying 😅😂 That's a super clean install for thay supercharger 👌. Looking forward to seeing what power it makes now. I wish I was in America I would definitely be entering the competition.

Anyone here watch all the LHT videos? Just keep thinking about what John does on every s2000 kit he installs. 😆 🤣

@alejandroochoa3541

9 ай бұрын

Which is?

That supercharger kit looks slick! Also, love the blooper reel at the end hehe.

The S2000 is such an awesome platform to build off

Best Car Content Channel By Far!!! Keep It Up Boiz Love To See All The OGs

What!! Who wouldn’t want to boost that baby !! Love the fact you followed through with clutch to keep it gtg for a while . So dope

I love the blooper I hope you could add more later on in you videos keep up that hard work love seeing you progress.

21:02 tests the fit, when both hose clamps are on the Air Filter side... Good job man 🤣

Lmao, love the bloopers at the end & how much fun you guys have!

Wyatt is the man brother you do great work on everything you do you and the team make what I wanna have in my life

Hell yeah I called it 🤙 I knew a supercharger would be sick on the S2000. 🔥 work as usual fellas 👌

Jamie with that nitrous made me really LOL💯🔧🚗🏁®

So glad you guys are fixing and tuning 🙌

Love this content back in CO! Just seems more natural having the Kyle back in the shop

ive been wating for a supercharged build and this def didnt let me down!

Nice. My buddy had a supercharged s2000 that used to eat porches. He turned it into a full race scca car and ended up going back to na because the supercharger was too much for the courses. Such a good setup with that supercharger though.

Man I love seeing Brent in the videos, he's just such a great character to have around

After my crazy horrible days at work l watch you and all the other bozs and l smile ✌️

Very cool little build. Probably going to be a super fun driver

Definitely gonna grab a hoodie or something have wanted an s2000 ever since I saw Johnny Tran give jesse the dust in that black s2000 I was 11 back then 😂😂😂 thanks for the opportunity kyle!!!! Also whoever said leave it stock really? Live a little!!! 😂😂😂

Looking so nice , great job 🔥🔥🔥🔥🔥

Dam your shipping is very reasonable, congratulations on that, how about adding a knife to the collection ? maybe a drink cup (yeti type) with a top so it won’t spill when doing donuts 😊, keep up the fantastic job 🔥🔥🔥🔥🔥🔥🔥🔥🔥

Please do a roots style supercharger for the boiz 🎉

It’s crazy how Brent still gets his hands dirty. Gotta respect the guy doing what he loves

Need more bloopers that was hilarious lol

Wicked!!! Kyle Changing it up!!! Lets Go!!!!!!!

The bloopers at the end was a perfect touch

The only bad thing about these kits is the price but what you get is good quality. Love my rotrex

I'm seriously surprised that you Honda boys don't have weighted sockets for those crank bolts. Love PFI/BOOSTED content.

add a flex fuel sensor ,and tune for for both so whoever wins it can run it regardless of fuel availability

Keep up the awesome work!

Love seeing brent so happy to just help you out with anything real love right there ❤

I like how clean the kit looks 👍

Shoot even that stock exhaust manifold looked pretty nice. Better than a cast log manifold

Jamie and Jackstand. Keep the bottle out of their hands!

What a tease. Looking forward to the dyno session.

Would of been great to see how much power the Skunk Works exhaust added over stock when you laid down the initial figures Kyle..... but great work by the team!!!🙂🙂

Woah! Kyle installed everything in one video that’s unbelievable! Where’s the 5 part intercooler days gone? 🤣

I had a buddy who had an EK Civic hatch (like Kyle's), but he had it painted Tahitian Green Pearl, it had a freshly fully built JDM B16A, and it had a Kraftwerks supercharger kit. It was really surprising. My EJ8 EK coupe had a fully built LSVTEC turbo that made 709 whp, and every time I would take mine to the strip it would have some stupid issue like a TPS malfunction or a fuel pressure issue. His hatch made 356 whp with the supercharger and that's a damn good feat for a B16A.

We need more bloopers 😂

Man I would really like to watch another boostedboiz/pfi vs cleetus crew build off!!!!

Lmao yall are such an also me group of ppl I need yall in my life

Those ap1 retainers are known to crack. I’d recommend changing them to ap2 retainers/keepers for extra insurance

I had an s2k with an sos sc kit, badass clutch, kwv3, oem hardtop, and bbk among other supporting mods when I was stationed in Germany. It was good fun on the autobahn and Nurburgring but was still pretty flat torque wise vs a turbo setup

Dang. Get you a man as strong as Witt cranking on that bolt. 😂😂

Good job guys loved the ending lol

im loving those out takes !!

I might need to buy more merch after seeing the full skunk2 exhaust and header and haltec

First time commenting. But just wanted to say,Me and my son have been watching your show since the beginning. Have to say it's favorite channel. Love watching you guy's.

You should add bloopers to the end of every video 😂😂😂

You need to wire in a 3 bar map sensor and use the map sensor on the Haltech for ambient air pressure. It will help with altitude changes.

@compjake

Жыл бұрын

I use a haltech on my 4G69, only using the internal map sensor and have 0 issues going from 1500ft to 6000ft 🤷

love the bloopers at the end

crazy chris racing on point with the hp guess

Awesome work that kraft box is beaten up I was expecting alot of broken pieces in there😂

Im liking the end of video bloopers reel. Make that a new outro trend :D

12:53 For the price of that kit and what seems to be ease of installation, it seems like a real real good price for that whole kit.

Any video with the old gang is Golden! Insane vide with everyone.

I really feel like you guys are a big enough channel to upload at 4k. Love your guys videos but KZread 1080p mid and your iPhone can do it. On the road when upload speed sucks sure but at home you guys could do it 👍Love the s2000 gonna cop me a entry fr.

Man you guys making my dream right here 🔥

I have a question concerning these plug and play type ECU's since they plug into the factory harness. Is the OBDII port still functional? I live in a state that requires them.

Keep pumpin the trans jack lol 😅😂😂😂😂 much love to this grohp you all work well together

This is my favorite kit for the s2000. I've installed probably 100 of these on customers cars. I'm gonna have to buy some merch to maybe get one myself.

This thing is gonna start blowing differentials after this 😂

If this works good please do it on the jet boat too!!

This is going to be such a nice little ripper. Who ever wins this car, is one lucky bastard!!

Keep it off the 2 step and limiter, those rotrex superchargers don’t last well when they see a lot of that being a friction drive system inside of them. They like to snap the impeller shaft if it sees bouncing RPMS.

@johnbean2596

Жыл бұрын

Get this to the top so Kyle doesn't 3rd gear this supercharger lmao

@jeffturple5206

Жыл бұрын

EngineRpm also has to be set properly for the pulley size to not over spin the charger. I believe the one for that kit has a 100k rpm impeller speed.

Your giveaways never disappoint

Brent's just one of those people that I feel like you could trust with anything. Even your only child, lol. He's just an awesome straight-up dude. Whatcha see is whatcha get. 👍

I just ordered a novi 1500 for my Mercedes ls3 swapped c280. Looking for 650 whp. First centri supercharger for me also. Good stuff I’ll be watching this closely.

As an Aussie Love to see more Haltech ECU's being used!

soooo happy to see so many SRT-4's in one place

Definitely should of resurfaced the flywheel and did the AP2 spring and retainer swap look up LHT PERFORMANCE they jist put up yet ANOTHER video on how bad the AP1 Retainers are you dont want a winner to drop a valve ATLEAST LOOK INTO IT just looking out for my boys

Those superchargers are a hit or miss so if you miss get at them quick because they'll only warranty for a year or two the one we did was bad out the box. Symptoms was it was very difficult to start up

Love the bloopers

Listen to you guys…”that ain’t stock! It’s got da kizzle nizzle!” 😂😂😂

rifle bag in the passenger seat during the first dyno pulls :D been using the drop top to tag some bunnies?

Nice to see a Supercharger around might supercharge my daily

Just wondering if the shipping is delayed, order some stuff almost 2 weeks now and still unfulfilled

WHO'S VMAX MNOTORCYCLE IS THAT IN THE BACKROUND? I raced one of those at the strip for several years in the 8.90 class . they are beats from the factory. mine was turbo charged 1825 cc kitted 300 hp monster . i am a big dude,6'2 275 so i needed a big bike .lol

Throwing all the parts on the s2000. Love it

I wish us Canadians had a chance to win this! Such an awesome giveaway car , really clean. Keep up the great content!

loved the outtakes

420hp baby! Might want a pump gas tune...not all gas stations have E. Flex fuel sensor will be sweet. Good luck to Wyatt, call them out!

@ArKritz84

Жыл бұрын

Also, running E85 with stock lines and gaskets may not be the best idea in the long run.

@ruikazane5123

Жыл бұрын

@@ArKritz84 and those lines be 20 years old, so yeah...

What’s the plans for the old injectors I could use them for my turbo em2 build

Loving these old school vibe videos in Colorado. So much laughter and shenanigans make these videos complete.