Deferentially looked like a clutch problem to me as well!! Robert had to many drinks at the Mexican restaurant and decided to make cookies! your secrets safe with us buddy! ;)

I confess not a big dog fan, but it's your show and I respect that. I like to watch what you guys do, and so I watch.

@jamesorr2832

7 ай бұрын

I like Dogs but I wouldn't want to live with two Big Dogs in a truck, the smell has got to be bad, Nope not me!!

@spencers4121

7 ай бұрын

@@jamesorr2832 That's like having four people in the truck, and I'm a fan of pets.

@mikebonnett7730

7 ай бұрын

@@spencers4121I agree I saw a small motor home at a gas station this summer that was less than 20’ total length and three people got out with four dogs that were as big or bigger than these two I can’t imagine how cramped it must be in there

Back in the day. Across the interstate was Biffles smoke house. Best darn bbq we ever found on the interstate. Sadly they closed up. Take care.

Lita, Robert really enjoyed watching the fur babies enjoying playing around. Here's hoping that you don't get screwed around and not get paid for those trucks. You guys are awesome together. Stay safe and stay safe 🙏 ❤️

Lucky you taped it to put it all back properly Lita Robert jacked up da freezer

One mile to the gallon is big money at the end of the year congratulations robert

Sounds like the clutch on the compressor squealing.

@sklsout

7 ай бұрын

Ditto

@SouthGeorgiaHotShot

7 ай бұрын

Hmmm. I think it squeaks even when the ac is t turned on. I’ll have to test that

@aaronpeddicord2944

7 ай бұрын

Exactly look at the front of the AC compressor pulley and look for plastic shavings

@bavandergriff

7 ай бұрын

Sure sounds like a/c clutch issue you could hear it and see the difference on the clutch when it load up

There must always be some play on drive belts…too tight leads to bearing failure. More expensive inconvenience!!! Belt more than likely squeals due to coolant spraying/leaking onto it from defective pipe on radiator. I would recommend replacing belt when you replace radiator and spray pulleys with drive belt restorer or brake cleaner to remove coolant residue. Best of luck 😃

Free tech tip put a small amount of roofing tar on the belt just like belt dressing it will never squeal again.

Red sky at night, sailors' delight. Red sky at morning, sailors take warning.

First from Barstow while trying to download Napoleon dynamite

Enjoy you guys a lot also I watch a couple trucking. Trucking Together

That squeaking sound could be the AC compressor or alternator putting a load on the belt when it turns on. The clutch on either one might be having a problem..

We have a power XL it does everything...steams rice, frys, bakes, and airfrys... we had a 1800 watt inverter. Easy clean up. Could be the wrong belt on APU

Love your dogs, I have a Cane Corso and Staffie!

Hello Robert. If the belt is still squealing, try this: Belt Dressing - WD-40 Specialist Automotive Range. Can your part of hauling vehicles be C.O.D.? Have good days!

so far looks like the new truck is working out. glad to see that

Love the dogs scratch fat but lol for me

Yeah those air fryers all vary. I learned to never follow the directions and just sneak up on it myself. Def learning curves in it. GL You guys are THE BEST!!

Tacoma pickup; could not get belt to stop squeaking. "Gatorback" belt solved the problem. Not sure there's one available for that, but having breaks in the ridges on the belt allows moisture to escape and, I guess, makes up for slight misalignment between the pulleys. No more squeaking.

If the only time the belt squeals is when the compressor clutch locks up I’d say the compressor needs to possibly be replaced. Shouldn’t squeal when the alternator is charging because it’s actually charging all the time while running. Check AC compressor 🤘🏼

I learn something new every time i watch you Your not a Baker Keep on truckin ❤😅

My tk apu is 16 years old, belt always squeaks for a few seconds. Bunk heater the same age, rebuilt once. Always smokes on startup. Just remember in summer and spring to run it on high for an hour to burn the dust out

It’s great to see that you’re new truck is getting good fuel mileage and your having fun on your run. You kids be careful out there on the highway and have a good Thanksgiving 👍

Hey yo man you guys are great love all the videos keep on trucking my dude ❤❤❤

When you remove the belt get under there and check all the pulley grooves.....make sure they're clean. I've seen that cause problems before.

Hey @Robert, Here's a video you'll like TQL TOTAL QUALITY LOGISTICS has losses in a class action lawsuit. They have to back pay 4,500 employees OVERTIME!

A new belt should fix it as you say, sprays only temporary mask the problem.

Cooking with Robert is not going to be a major TV hit! As for the aluminum foil shinny vs dull side makes no difference. The dull side of the foil was ridding over roller. During manufacturing!😁🛫

Happy for you guys digging the truck, Thanksgiving is safe getting home

At least I know hi not to cook cookies in a air fryer now, but still over here waiting on the PB&J tutorial

I've had a Ninja Speedi on my truck for 6 months and I love it. Hope y'all enjoy it

@bidenblows24_7

7 ай бұрын

Pink tacos?

Y'all make a great couple & ALL of your videos, are very entertaining. Steve / W5BIB - retired OTR 1977-2009 - (still miss it the way it WAS back in the 70's & 80's)

It looked like the compressor was trying to lock up

@NORCALBIKEVLOGS

7 ай бұрын

Compressor is failing or clutch.

First let me say, I love watching your dogs. I am a dog mom to a 6 year old Dutch Shepard and 2 dogs I rescued from my deceased sister. Second, my husband is a long haul trucker, company driver. He said to get the belt to stop squeaking, rub it with bar soap unt you csn get it fixed.

Nothing better than chocolate chip cookie dough for a snack ! Sure glad the new truck is working out for you ,enjoy your videos !!!

Robert, thank you very much for the new endings.👍

Good Sunday to you both from the Puget Sound area in Washington State. Glad to see you have sunshine. Thanks for your update videos.

@Mississippi87

7 ай бұрын

Is it getting pretty cold there

@CSmith-oz4wp

7 ай бұрын

@@Mississippi87 no, when it gets colder 40 degrees or lower it stays drier because of the cold air coming from Canada. When it’s wetter (rain) 40 and above wet weather comes up from south or Pacific. Sorry talking weather. This time of year should be rain on and off. To many mountains for the weather to divert the clouds so we don’t know, just go outside and look up. 😄

Always wanna see those happy well-rounded dogs!

I like seeing your dogs.

Hello from New Hampshire looks like a cool way to cook

Hey there enjoy your videos. Some old man advice. I would not let later go anywhere without you. Things are just getting crazier. I like a lot of the other people tell you be safe. Looks like you two are very happy.🎉🎉🎉🎉🎉

You were at one of the oldest and first TA's in the USA.

Hi both of you. Nice one see you in the next one stay safe 👍🇬🇧

If you are looking you are not cooking 😁🛫

I make those cookies in my air fryer, I use cooking parchment instead of foil though. Takes some experimenting on the cook temps and times, I know I bake mine at like 300-310 The great thing about those cookies, you can sort of limit how many you cook so you don't end up eating them all.

Get a slow cooker, mount it to a piece of plywood with a bungee strap so it doesn’t fall over and start cooking when you start the day. That way 4-6-8 hours later you have a slow cooked roast or prime rib or even corned beef. Or even a beef or some sort of STEW.. ((I haven’t done this in a while but it has been done before))

@beetlebailey

7 ай бұрын

I’m going to make a SHASTA DOG page..

You had me laughing today. You destroyed that freezer lol

I'm glad you really like the truck. You said you get 1MPG on top of the 6.5MPG with the Mack, that's a 15% increase in fuel savings. That will help you pay for the truck. Lita probably knows but there is "No Stick" aluminum foil which is good for doing "sticky" things (melting cheese, cookies and other things that will stick on regular aluminum foil. Things are turning around for you two, never give up. You're back on track!

My Thermo King squeaks just like yours. Mine has just over 3000 hours on it.

That sounded like ac clutch hanging up not the belt

When I airfry I always use about 15 degrees west than with the package recommends and always always check your stuff a few minutes before I recommend a time completion

Made it better addiction of that washer Mackie too funny

This is my hometown

I always try to find parking where I can walk the dogs straight back along the trailer to grass. Unfortunately, some truckstops are surrounded by high weeds and not mowed grass. Guess their mowers can't handle all the trash piles. Speaking about trash, why is it that shippers will refuse a trailer with trash left in it when the same facility on the receiving side will leave the trailer full of crap??? They have forms to check off about the condition of the trailer before they will accept it. Seems like we should be able to do the same...

There is a popular convenience store chain around southern new england that sells prepackaged edible cookie dough 2 varieties. I buy it sometimes during my day while driving. The sugar does make me crash though after an hour

Polk holes in your foil when cooking your cookies

Hey once you get some cushion cash.get the tractor into Hagai .have the overhead set and they will check for any TSB flashes from Cummins or recalls. Mainly the HP common rail pump.if it has ceramic pistons in it its a time bomb.when they fail it trashes all injectors and pump body.

I got a Ninja Speedi. You guys will love it.

I really miss it

Don't think I've ever heard of Concordia before. I'm actually currently living in Kansas City, MO - stay safe out there!

Mine was squealing like that and I would tighten the belt and go away and come back but eventually I had to replace the air compressor because it finally went out the bearings fried

Good video keep it up

i love the dogs

I seen you have disk brakes does things are great I love them stop better and to replace the pad you can do all wheel in less than 15 min

Hi Robert and Lita

I’ve seen pulleys wear out before , that causes even new belts to not last very long. Keep up the great work/videos

You were talking about keeping milk in the truck. You can buy little boxes of 2% milk that does not need refrigerated. I have some but have not tried it, only bought them in case I was out of milk, or it went bad. They look like juice boxes.

the skies thru out this country is strange this month. here in Wa, PNW, skies been red with a yellow tint, fantastic but..

Belts will squeal when contaminated with coolant and idler pulleys will squeal when the bearings wear out too.

Serpentine belts are worn out long before they crack. Advance auto parts has a free tool that measures the ribs and lets you know when it's worn. I can tell usually just by looking at them. The gap between the ribs wears and no matter how much ua tighten it it won't stop. Just buy a belt. Rock auto sells BANDO belts. You would have to cross reference it to them but they are the best belts and they have em for 10 bucks or less

Hello Robert & Lita...

Come to Arizona for beautiful daily sunsets.

The China people sell that fridge under a bunch of names. Mine looked exactly the same but was a 54 QT. and was called an Ausranvik. Mine is 3 years old and has run 7/24 since the day I got it. I have mine set for 30 degrees and it runs GREAT !!

if u have a old bar of soap rub that on the belt works great on cars belts

Check the pulley. If its look real shinny you gotta change the pulley because its glazed and thats the source of the squeal.

43 mins whooo🤟

there has to be a better way too package those cinnamon rolls maybe if they would make it so at least one end would separate from the cardboard then you could twist the tube open farther and make it easier too get them out otherwise when you twist it there are one or two on each end that that you can’t get at and you end up destroying the rolls trying too get them out of the package

You guys seem to be doing well glad to see that I really like all the content videos are awesome your pets are funny it seems they do good riding in the semi be safe out there these days people are really unstable at times lol

Freezer gel packs in a thermal bag will keep a quart of milk cold for days

32:17 If you're a lookin', you ain't cookin! lol

I use a combo microwave airfryer roaster Etcetera about the size of a mini toaster oven to pull out racks are sooo much easier to cook with and dropping stuff down inside that ninja trying to fish it out

Put a new belt on they get slick. if it a v belt they wear on side underload

I would see if gates makes a green belt for the APU. They probably kept using the cheapest belts possible. Could also try some belt dressing.

Try a new belt on the apu, and keep the old one as a backup or buy two. Don't need to be searching for another. A lot of these companies build their units with slightly odd sizes, so you have to buy oem.

19:20- That's what happens when a load is put on the belt. The alternator is loading the mechanical system and it's causing the belt to slip. That's the squeal. Now your job is to find out if that load is 'normal' or if it's not. The alternator itself can have problems (bearings) that can cause an undue load on the belt or something else, like the compressor (you mentioned that, I didn't know there was a compressor in that unit). Anyway, a heavy electrical load, where there's much current being drawn from the alternator instantaneously on startup can cause it to mechanically "stall" under and make the belt squeal until the belt grabs and spins the alternator to the point that it reaches equilibrium by charging the batteries (if they're very low) or simply is at a point where it can share the load. Low batteries can cause a surge of current from an alternator causing the belt to slip. Maybe you should have them checked?

I have the enormous Ninja Foodi. It does everything except load the dishwasher! Use some spray on the tin foil so they do not stick

Hey Robert, when the heater smokes like that on the start up, that means your glow plug is on the way out inside the heater pretty expensive, but you need to change that

That Miles per gallon savings compare to Mack is truck payment for the KW

I carry a spare key in my wallet also one in in a little magnetic plastic batch box thingy on a frame rail

Here but late to this one

You have to use a pry bar and tighten the belt for the apu get it as tight as possible i do it a few times a year tighter than fuk

Hold a bar of soap to the pully side or V side of that belt while the engine is running, that will stup that squeal.

I have an espar heater. It has always smoked when i start it. I bought the truck new, so I figured that's the way it was supposed to be.

@youtubeisawesome2487

7 ай бұрын

your air hole by the glow plug is stopped up, use a wire to clean it.

@rce8540

7 ай бұрын

You should service the espar once every two years great heater. They are the best.

Seus vídeos são bom demais!👫🐶🐶

I'm assuming you did loosen the other upper bolt that holds that alternator on there

I got a iceco it’s great

Awesome run. Glad the K whopper is doing good.

Leave the cooking to Lita lol

Don't know why people wouldn't want to see ur dogs bro.they are a big part of trucking with y'all from all ur videos I seen, I just lost my pup 3 days ago. Some pos ran her over.

@SouthGeorgiaHotShot

7 ай бұрын

Omg sorry to hear that. That happened to Ratman aswell