I have those pegs on my 250EXC Sumo - they're great. I'm running a 44 rear and still deciding if it's right for the cart track but I DID get a decent chain (see what I did there). Great video as always.

@socalsupermoto

Жыл бұрын

Right on

Gearing for sure. I have sm tires with 47 tooth and a knobby wheels with a 41 and what a difference. Didn't need a chain tho. Plenty of adjustment. So glad I watched this I'm 6 foot 5 and constantly feel like those pegs are barely holding on to my size 13s. Also the handlebars I'm always leaning over. Great content.

@socalsupermoto

Жыл бұрын

Thank you and glad we could help!

I put a 438cc jug and piston from Walmart on mine for $130 with all gaskets and sealers. Then 118 eBay FCR 39 mm flat slide and intake manifold from the e model. Holy cow what a difference The carb made.

@socalsupermoto

Жыл бұрын

sounds fun! def win the bang for the buck go fast...

For bigger tracks, I run a 15T front and a 36T rear (aluminum Vortex).

@socalsupermoto

Жыл бұрын

perfect!

Great video. Speaking of mods, would you go down 1 teeth in the front sprocket on a 701 Supermoto used as a daily commuter that also doubles as an occasional track bike (on gokart and medium sized tracks)? The current gearing is perfectly fine for the street, but on the track I'd love to have better acceleration.

@socalsupermoto

Жыл бұрын

Honestly I’d just keep it as is unless doing mostly track, especially with that much engine

@Szlejer

Жыл бұрын

@@socalsupermoto Thank you very much!

Should have added the Chinese version of the FCR off ebay. They're around $150 bucks. Then we would know if it really is worth it! Thanks for the all the vids!

@socalsupermoto

Жыл бұрын

I would but I hate the fcr on the drz. Yeah i said it :)

@Davester74

Жыл бұрын

@@socalsupermoto why

@socalsupermoto

Жыл бұрын

@@Davester74 too jerky, and they also get weird jumping em.

@garrison2574

Жыл бұрын

@@socalsupermoto probably just never had the needle set properly unless you've tried other bikes with an accelerator pump and had the same thought. My drz with the fcr is still smooth and easy to control on/off throttle and small throttle percentages now that I got the needle dialed in.

Is it just me? Or did that rotor crack in two on the top left corner there..

@TheUnderFighter

Жыл бұрын

Probably. They're cheap and crack easy.

@socalsupermoto

Жыл бұрын

Yep. I've run it like that for years with no measurable effect

I would not skimp on the chain, rotor, or jet kit.

@socalsupermoto

Жыл бұрын

The jet kit is solid, that thing is jetted awesome.

Do you think a cheap full exhaust would be ok,do you recommend any filter air,just bought one and it seems choked by the stock muffler nice vid thanks

@socalsupermoto

5 ай бұрын

some bikes have super restrictive headers, but the drz isn't bad. For my bike I'd buy a stage two jet kit and a slip on and call it a day. do not do the 3x3 mod.

@skatman3872

5 ай бұрын

@socalsupermoto Thanks i appreciate the advice,Thats what i will do

Awesome Videos.. Can u make a tutorial especially, when and how to make the foot out in corner? I feel much comfortable when I put my feet out in corners, in small and in long corner.. I feel very uncomfortable when I DON'T do my foot out, like I will slide away with my tires.. how can I get better trust in my tires or in my lean angle? My tires have enough place.. chicken strips..

@socalsupermoto

Жыл бұрын

Great idea! I put it on the list. The short answer is only for a second or two and "kick the apex", not literally, but drop foot aproximately at the apex or where you start to get on the gas. As far as lean angle, stop worrying about it. Focus on fast transitions and early gas, it's safer and will get your faster faster!

@Tuniermaster

Жыл бұрын

@@socalsupermoto Okay thank u very much.. How I get more comfortable and don't worry about slide away because my tires can do much more.. But it feels like I am driving kn last centimeters.. Can the Husqvarna 701 scratch on the bottom with the foot pegs before its too much lean angle

Hi great video What jet kit did you use what is the size?thank you in advance

@socalsupermoto

Жыл бұрын

If i was a organized youtuber I would have put that in the description, but I'm sorry I totally forgot what we put in there!

What do you do for shifting? Using the clutch? Clutchless? The little time i have racing sumo im still unsure, tried both and feel like the clutchless shifting feel pretty good, just wanna know your opinion

@TheUnderFighter

Жыл бұрын

Clutch down. No clutch up.

@socalsupermoto

Жыл бұрын

what he said, no clutch up, always when down.

Great Vid mate Iam 6' 5" what height bar would you recommend? I'm just riding street. I have recently purchased a tall seat, Yet to be installed. Thanks Mike, from New Zealand 🇳🇿

@socalsupermoto

Жыл бұрын

rc double highs!

Pitch? Links? 👍

@socalsupermoto

16 күн бұрын

sorry can't remember the links, we're not that smart...

Does the e gasket and cams make a big difference?

@socalsupermoto

5 ай бұрын

yep. I like a e gasket and cams but wouldn't bother with the gasket until i had to do engine work. E cams are great, esp if you lie the revvy rev

What would you say the top speed is with the 46t rear sprocket? I've been running mine 15/38 for 3 years since I was having to do 75mph interstate for my commute, but my new job I can take regular 45/50mph roads, not sure how far to go tooth-wise but wanting some of my torque back

@socalsupermoto

Жыл бұрын

Hey Sam, in your situation I think bone stock gearing is perfect. 15/42. Still able to throw up easy 2nd gear wheelies without having to shift all the time. I error on the side of too tall for all street bikes. Now if you're never going over 50 then yeah maybe 15/46, tops around 72?

@samfiles

Жыл бұрын

@@socalsupermoto Thanks so much! Also thanks for taking the time to reply, you've replied to a few different comments/questions of mine over the years and it's always helped me so much, sincerely thank you, means a lot

@socalsupermoto

Жыл бұрын

@@samfiles yew gonna work on coming back here more than once every 6 months :)

@samfiles

Жыл бұрын

@@socalsupermoto I'm working on it xD I just shot you a follow on insta too, I'm a lot more active on there these days!

@skatman3872

5 ай бұрын

Are you throttle wheeling or clutch,

That front disk looks cracked ?

@socalsupermoto

Жыл бұрын

Yep. and when I swap it I can't feel anydifference. I've run it like that for years.

Are those dunlop q5s ?

@socalsupermoto

2 ай бұрын

Yup!!! Soooo good!!

@miniman1448

2 ай бұрын

@@socalsupermoto what size would you recomend for mountian twisties and street riding ?

@socalsupermoto

2 ай бұрын

@@miniman1448 120/150 is gonna get it done!

@miniman1448

2 ай бұрын

@@socalsupermoto thanks !! Does 150 require any modification ? Also can these tires be ran on the stock rim. I believe there tubed.

@socalsupermoto

2 ай бұрын

@@miniman1448 fits, tube is fine, go rock!

That front rotor looked like it was cracked.

@socalsupermoto

Жыл бұрын

Yep, it's old, on my personal rider, and I can't tell at all.

Do you open up the air box too?

@socalsupermoto

Жыл бұрын

Absolutely not. I HATE the 3x3. Just removed snorkel. Do t cut your air box!

@AllThingsSuperMoto

Жыл бұрын

@@socalsupermoto Why don't you like the 3x3 Mod?

@djeq721

Жыл бұрын

​@@socalsupermotoInterested to know why too

@socalsupermoto

Жыл бұрын

@@AllThingsSuperMoto kills low end which is where i like it, especially for corner exit, one of those places where dyno numbers does't actually make you go faster in the real world in my experience

People who don’t own drzs tell me all the time to trade it in. They don’t understand.

@socalsupermoto

Жыл бұрын

I've heard people I've passed riding a drz, advise other riders to "get a real bike"