when you added part A to B its the hardener so even though un mixed it was setting off that's why you had a crust at the top which was pushed to the bottom to mix the rest. next time setup your part B in one container then part A in another and dont combine both parts till ready to mix and pour.. its just a simple error where you put the resin and hardener together and left it to sit.

Total Boat makes awesome products. Glad you figured out what went wrong. Good luck on future projects with total boat. Your epoxy projects are awesome, and very inspiring!

Are we still pretending we watch this channel for the art? 100% the videos her husband does without her gets zero views lol

@mdmoore23

2 жыл бұрын

Why do you have to be a dick? They get decent videos on the ones that only have her husband also. But there’s nothing wrong with appreciating a pretty woman while learning and watching something be created at the same time.

@victormatamoros9219

2 жыл бұрын

Xd

@skliros9235

2 жыл бұрын

Come on man. Lol

@juanconner4115

2 жыл бұрын

Yes we are 😂

@ThursonJames

2 жыл бұрын

Why can’t it be both? I want to learn about epoxy chakutery boards.

Zoe you and your husband build and make awesome projects, I really enjoy watching y’all build stuff, my wife is getting into this epoxy stuff too, I’ve got a few things for her to make for me, I cannot wait 😂 thank you for sharing your talents

Amazing work guys! Thanks so much for your continued partnership and love of our products as well. We appreciate you! As a side note, we are big TotalBoat users, it's just bad luck (or... Trey...) that the epoxy didnt get mixed right, but I can tell you first hand that the TotalBoat products are great and the team over there are stellar!

@TripleLRusticDesigns

2 жыл бұрын

Thank you so much guys!

Oh no! For deeper mixes and pours, you will want to go with our ThickSet Epoxy or ThickSet Fathom Epoxy. Too much of the High Performance Epoxy was poured at once and left to sit too long which caused it to over heat and smoke. We recommend mixing smaller batches at a time and pouring the High Performance no more than 1/4" at a time. The rest look great and we can't wait to check out more of your epoxy projects. Feel free to reach out with questions about the different resins and their uses!!

@TripleLRusticDesigns

2 жыл бұрын

Thank you for the response guys! Watching the video back, we had the ThickSet sitting right there next to the High Performance. I just chose the wrong one to use. Thank you for explaining what we did wrong! We look forward to making more videos with the Thickset! Thanks for everything guys!

@andfelix1

2 жыл бұрын

Kann kein Englisch sorry

@sassafrasvalley1939

2 жыл бұрын

I’ve done that too!

@andfelix1

2 жыл бұрын

@@sassafrasvalley1939??????

@sassafrasvalley1939

2 жыл бұрын

@@andfelix1 I only speak English.. I was replying that, “I had mixed the wrong chemicals too”.

Always enjoy watching woodworking videos, especially from someone as easy on the eyes as Zoe, but this video where’s its quiet and she’s teaching us about epoxy just shows how smart and articulate she is as well! Also appreciate keeping it real by showing everything, even mistakes. Keep up the good work Zoe!

Seeing her performance this show would never suffer a fail!

Great video. Good to see other brand names. Happy and Blessed Easter to your family

Love to see the videos where things go wrong. These things happen. Learning experience for sure.

Great video Zoe. Wishing y'all a very blessed Easter Sunday.

Ambient temperature will make a huge difference when the mix will kick off. We always experemented in a small cup before mixing big batches. And wearing a respirator, even out side might be a good idea.

Live and Learn :) Zoe and Trey, looks like a lot of work :) Keep up the good work!

Great video. Happy Easter to you and your family

Great video! Thank you so much for the shoutout guys 🙌🏻

@TripleLRusticDesigns

2 жыл бұрын

Anytime brother! More to come in the future!

Excellent creative and extraordinary work...

When doing projects that involve epoxy resin I suggest you work with one mixed batch at a time. Measure Part A and part B, mix the two parts together and pour before you start another batch. That way you don't let time pass and let the unmixed parts sit in the container. That will almost always cause issues like with your Total Boat batch. Following your channel all the way from South Africa and enjoy your projects. All the best at the market.

Great idea the products your making is there any smelly fumes from the epoxy your not wearing a mask

Awesome I love epoxy work! Great seeing you guys cover this!

@TripleLRusticDesigns

2 жыл бұрын

Many more epoxy videos to come!

@johnfive4869

2 жыл бұрын

@@TripleLRusticDesigns What are prices for such beautiful works?

Amazing work!

projects turned out great

Great video Zoe and Happy Easter to you! Seeing you is always a treat or even a holiday! And even as time passes where you're expecting you'll become even more BEAUTIFUL ZOE! Thanks again for sharing your videos with us along with your time and effort to get the BEST FOOTAGE!

Good work and looking lovely

Yep, I’ve done that before too! Mixed my resin a little too hot for a fiberglass project because I was impatient and it did the exact same thing. Super hot, cracked as it dried, smoked, thought it was going to warp or melt the mixing jug 😂😂😂 good times!

Zoe saludos, igualmente a todo tu magnífico equipo de trabajo, desde México...

Greetings from KSA, Nice projects, and well presented 😁,... Super 👍

Happy Easter love the vids and fits more 😅

Baby bump. Can't wait

Zoe… those boots are gonna make a huge difference! I can walk all day in mine… can’t hardly make it across the driveway in my rubbers!

I saw total boat on Jimmy diresta videos and ordered and used it. Worked perfect.

Happy Easter 🐇

ZOE is gorgeous and that is a compliment

About the total boat once u put a and b together you have to mix it and use it but read the instructions before using it. 👍😎🇵🇷

I would give some thought to wearing eye protection when pouring and mixing product. Not sure if there is a toxic off gassing component to your products but my experience with fiberglass would also consider respiratory protection be used.

están lindos tus trabajos this Nice You works 😀😙😀😀😀

The ending!

It's funny I just watched your latest video and was wondering how you got the epoxy out of the mold and low and behold here it Is

Happy Easter Zoe from Warren. Nottingham. England.

Good job speaking here from Brazil!

Yoga Pants!!!Yoga Pants!!!Yoga ,Yoga,Yoga Pants!!!!!!!🤟😎👍👍👍👍👍👍

I have been using Total Boat products for years. Great company.

Dayumn she is smart.. yeah send me a big 'ol package of thousands of dollars worth of epoxy. you too can get a permanent advertisement in our videos.. thats a great deal for both people I love the ingenuity!!

Wow just saw y’all’s episode on 100 days Dream Home. How cool.

all i can say is that she is triple awesome

You guys should try FGCI epoxies. You might know the name SuperClear or Liquid Glass. Great product and they are pretty local, in St. Petersburg.

@TripleLRusticDesigns

2 жыл бұрын

We used Super Clear once. We would be interested in talking with them about a partnership

Congratulations on your first market 👏🏻👏🏻👏🏻 this was a good video even with the mistake don't worry it happens to everybody. Keep up the good work 👍🏻

Total boat is full of crap! the same thing happened to me when I bought their epoxy stay away from there products!!! I’m so happy you guys exposed this bs

@Hiltonology

2 жыл бұрын

Apparently you didn't watch the entire video. She figured out why it hardened so fast so I suggest you go watch that.

nice work

Great video sharing

I hope you guys resolved the issue with WHAT HAPPENED on the "Total Boat" chemical mix.

I need some of those molds.

The resin for total boat you used is for a laminating resin. It should be mixed immediately and used as soon as possible to avoid what happened in small batches. What you had was a runaway exothermic reaction. With resin, it not only generates heat as it cures, but it also cures faster as it gets hotter (something you'll notice in winter when it cures slower and summer when it cures faster). Deep pour resins have a slightly different chemical makeup that makes it cure extremely slowly (24 hours to a week) while laminating resins can cure within an hour to aid in its intended use, laminating. You mixed a large batch of laminating resin (not advised) then set it to the side (very not advised). because resin generates heat as it cures and there was such a large amount of it, the resin generated heat as it does when it cures, which made the whole batch hotter, which made it cure faster, which made it hotter, which made it cure faster, which made it hotter, which made it........... Tadaaaaaaaa! Runaway exothermic reaction 😐 Welcome to the club, everyone who has used resin has had a runaway reaction at one time or another 😝 Deep pour resin avoids this by curing slower so it generates less heat which reduces the chances of an exothermic reaction, thats why it can be poured +2" thick. Laminating resins are meant to be poured 1/16 -1/8" thick MAX. EDIT: Just saw you guys figured it out down the line 😁

@TripleLRusticDesigns

2 жыл бұрын

Thank you so much!!!

@ssssppppaaaammmmeeee

2 жыл бұрын

if you ever used epoxy for model building this is how it goes. I sealed two engines with model epoxy....

peach !!!!!!!

I like anything to do with wood. I heat my house with firewood which I cut myself. I'm making some small furniture with my chainsaw and always been interested in doing projects with epoxy. learning alot. We all know Trey's a lucky man to have a beautiful wife like Zoe.

Best of luck to you guys during the upcoming show. I hope your products are a big hit.

She’s an artist

Hi and good, ya got rid of the white boots...

Awesome projects.. can't wait to see how they turned out. I wouldn't worry too much better the mishap. We all run into problems like that.. ive had the smoking resin, I've also put to much of one and not enough of the other... it happens. 1 tip I will share when doing projects with resin, you want to take a brush and do a lite coat on the side or top of the piece of wood before you put the rest of the resin in helps with bubbles and helps if the wood has a hole or soaks up the resin

How long does the molds last ??

best regards from germany. i like it to much nice.

Te felicito saludos pura vida

ich könnte mir das jeden tag anschauen schade das ich in deutschland wohne macht weiter so

@eagleassets

2 жыл бұрын

Translation--: I could look at it every day, it's a shame that I live in Germany, keep it up

you two are good for each other and you always bush him lolol

Cool

I was wondering if you guys have attempted to make a large scale silicone mold? Roughly 4’x 8’ I saw the reusable hdpe video and was wondering which direction I should take on scaling one of these reusable molds. A large reusable silicone mold would be nice to ditch the fasteners but was just wondering if it would hold up well on a larger scale

@TripleLRusticDesigns

2 жыл бұрын

No it won’t work. We have looked into it already with Crafted Elements. I would recommend building an HDPE one like I did.

@jeffmurphey3101

2 жыл бұрын

I thought I might be dreaming too big lol Thank you for the input and I really like your guys work. That stihl saw is really nice too my slab guy has one it’s awesome to run

bonsoir très belles réalisations petite question la résine que vous utilisez c'est de la résine classique ou de la résine spéciale alimentaire merci pour la réponse bon courage

Lots of grandpas and mama bears out here watching over her. I know that you are watching over her too. You are a good man Trey. Course, to get such an awesome woman you should be. I know, I got my awesome woman 45 years ago! Blessings ya'll! Happy Easter!!!!

the cross molde are you selling the cross after you make them on your website?

@TripleLRusticDesigns

2 жыл бұрын

We will be making many of these crosses and selling them on our website after we finish the market this weekend.

Wish I was in Florida, any of the items available for shipping? Thanks

@TripleLRusticDesigns

2 жыл бұрын

Yes we ship epoxy and finished epoxy projects. Send us an email.

@josej-h1471

2 жыл бұрын

@@TripleLRusticDesigns is there a website to view all the items? Thanks

You had a exothermic reaction. You're lucky that cup didn't catch on fire. You needed to mix as you poured in part B as a good rule of thumb. Also you need to pick up a good set of weather gauges. Mainly thermometer & humidity gauges. 2 part epoxy is very sensitive to both. Pick a chart that's out there. Also DO NOT use the same cup for multiple batch pours. Older epoxy starting to flash off being mixed with new epoxy will go exothermic in a heartbeat! Next time you have a cup go off on you, throw it in a big bucket of water as soon as possible. N don't breath the fumes! Very nasty! We don't wanna loose the leggings! Lol

Amazing Creations 👍👍

Great vid! Are the fumes harmful to the baby? Careful with those chemicals.

How do you guys clean the red mixer after stirring the epoxy? I typically wait for it to dry then peal it off but wondering if there is a better way.

@TripleLRusticDesigns

2 жыл бұрын

That’s how we do it. Once it’s dry I break a small part free then use the air compressor and it blasts most of it off

@billknoth3244

2 жыл бұрын

Have a bucket of denatured alcohol and spin the mixer in it. Then I just wipe it off

@Recovering_Californian

2 жыл бұрын

@@billknoth3244 Nice, I'll give this a shot.

Greetings from Turkey

Perfect size shape and height.

Zoe, why did you place the TotalBoat sticker crooked?

@TripleLRusticDesigns

2 жыл бұрын

Lol she says thanks for noticing

Will you have any of these boards for sale on line?

@TripleLRusticDesigns

2 жыл бұрын

Yes but after the market this weekend

Where did you say you got your molds from?

@TripleLRusticDesigns

2 жыл бұрын

Crafted Elements

I like your back door

@undokat

Жыл бұрын

you're getting to the point

schön mach weiter so

Happy to see you all thriving in this business. My wife and I are looking for homes in the St. Pete area. Maybe we will work together soon. BTW, I noticed the Slab Mizer. I was blessed enough to work with the guys who created it here in Indiana. Glad to see my input was put to use from the prototype to the finished product. Happy Easter!

The other thing it was heating up because there's a chemical reaction just tossing in a 5 gallon pail of water it would have neutralized it

Please keep making these videos. Don't let the creeps upset you. Remember, it's their problem, not yours. It's nice to see informative content presented by someone so pretty instead of some stubbly faced grouchy guy. Haha. Just be careful around the chemicals.

@AllenRob87

2 жыл бұрын

Don’t be fooled. The slow motion zoomed in butt shots are not accidental.

@sporty22011

Жыл бұрын

My thoughts exactly!! I love woodworking and would learn from anyone but to get to learn from someone as cute and smart as Zoe is awesome!!

Fantastic video Zoe I hope the pregnancy is going well, you're sure looking good.

I pour all day and can’t believe you did not vacuum out gas any of the batches

Mixed hot. Shouldn’t have sat like that. The ratio is likely for something immediate. It’s really common in aircraft work for that to happen with a hot mix ratio. Not an epoxy issue

@eagleassets

2 жыл бұрын

I think it is the wrong kind of epoxy. It isn't a hot mix it is a chemical reaction that causes the heat if you stir it up it stops the reaction but she let it sit too long between stirs.

Nice proyec congrats

Poor III! (Trey)

Good idea. You just need to cut out some of the video that are repeats and do the whole video including removing from molds. I won't search out that video as it should be in this video.

Work boot dont show up on the web site

crazy really

Please wear the appropriate mask when spraying the mold release or anything else! The carriers in these products along with the chemicals are not good for you. Love the projects!

Are the measuring container a use once and toss out or can they be cleaned and reused

@TripleLRusticDesigns

2 жыл бұрын

We tip them upside down and after the epoxy hardens, it can be peeled right out and the bucket can be reused

The epoxy sat to long in contact with each other. Total boat is a fast acting epoxy. Will set if not mixed immediately

what the hell Tray, you done messed up!

@TripleLRusticDesigns

2 жыл бұрын

Haha drama must be created some how!

Giggity

Wow 👏... your are good .your the one.

Hey I'd be willing to bet you two know my good friend "Dirty" aka Donnie Randall and Matt Parke! if you see'em at the Strawberry Festival tell'em his Chef brother from NC said Waaaaaaasap

Thank you beautiful Lady 😘❤🌹

@18:58 it ain't the only thing that is

@mikesmith8589

2 жыл бұрын

Grow up

@firstlast7112

2 жыл бұрын

@@mikesmith8589 oh don't worry, Zoe for sure makes me grow

@mikesmith8589

2 жыл бұрын

@@firstlast7112 I don't think you should be commenting on here until you get out of 1st grade, at least

@firstlast7112

2 жыл бұрын

@@mikesmith8589 apparently you don't know what this channel is all about lol. This is all about Zoe looking good with a little bit of woodworking built in. It is built on her nice body and teasing people with it.