Perfect timing! I’m about to buy a hoist for my garage!

@wobblysauce

5 жыл бұрын

Are you going to do a Jimmy?

@Drew_peaballs_128

5 жыл бұрын

wobbly sauce no idea what that means

I just looked through their brochures and saw the cost of all the models, great deals there. 👍 I honestly would've thought double or triple that price to buy it let alone install it.

You say the right price and a good deal but don't tell us what that is? Most of us are scared of the cost involved so be honest about it. Tell us exactly how much yours speced up to what you wanted cost? We want those details. You not telling us just makes us think you got it at a stupidly good price and don't want to tell us. Even if you did be honest and say because they are a sponsor we got it for this much.... But for general consumer you are looking around this price. Being honest Is better then looking shady. We are all car dudes we know it's expensive and we understand you probably get big discounts due to the exposure you get. We don't care. You are not a sell out for teaming up with quality people. Anyway be honest and tell us how much it would cost us, the general public, for your set up including installation? We don't care even if you did get it for free. We wanna know the cost.

@MotiveVideo

5 жыл бұрын

Jacob McCarty way answr why we never give prices Different dealers in different states or different freight costs to get it to you. May not be available in your country. This is why we give the website address so you can check for yourself. We get in trouble legally if we give a price and then the dealer doesn’t match it so better to not give a price and let people go to a the website that we link in description.

@UltraMagnis

5 жыл бұрын

MotiveDVD I understand yeah make sense. Still would be nice if you could give us a ball park.

@MotiveVideo

5 жыл бұрын

@@UltraMagnis $4000AUD + install including lowered pads was the RRP we were quoted

@UltraMagnis

5 жыл бұрын

MotiveDVD way cheaper then I expected. Doable for sure. I am about to build a house with a big shed and I have been considering it highly.

@chrissharples8027

5 жыл бұрын

Jacob McCarty at work we have catalogues for hoists and they have all sorts, rotary lifts can be around $5000 and up, not sure of installation cost tho, but we have 18 rotary hoists and haven’t had any problem since we got them 8 years ago

The GTR looks sick on the hoist

Yay for more videos 🙏

they're rockin ozito hamma drill.... I'm rockin a ebay turbo and block who says you need top shelf parts?✌

@oldfashionedwrx3574

4 жыл бұрын

U don't. Budget accordingly and the money goes further, use critical thinking

Fascinating.

the filters used in the video are kind of annoying

@FullTimePRO

5 жыл бұрын

Yeah if you remember their earlier vids from the years past they got crazy with the color grading and cranking up the contrast quite a bit. Love their vids but the color grading thing is sneaking back in :(

@Cris-iw6su

5 жыл бұрын

@@FullTimePRO Yes, big fan of the content. Just a small gripe is all :)

Do you mind me asking the price installed?

@MotiveVideo

5 жыл бұрын

You would have to get them to quote you based on location etc but we were quoted R.R.P. to buy of $4065 with lowered pads plus installation. Its all on their website too

Can’t wait! The R32 is about to go next level!

@MotiveVideo

5 жыл бұрын

Nice one :)

@kylel2918

5 жыл бұрын

MotiveDVD thanks from the US 🇺🇸 for the GREAT Content! 👍

I have to ask this. I know this channel is about tuning cars and upgrading cars. But what is the Nissan Skyline GTR cars reliability like tuned and non tuned?

@MotiveVideo

5 жыл бұрын

We made a stock bottom end go into the 9s and last 6 years all with stock drivetrain other than clutch and we put a box in. Theyre tough cars when done right

@Steve30x

5 жыл бұрын

@@MotiveVideo The reason I asked is because I had a short discussion with my brother about the pace car in F1. I said they should be using a Nissan GTR instead because it would be faster around the track. My brother laughed because he is a big Mercedes fan and he said not only would the pace car look stupid if it was a Nissan GTR but the Mercedes was far more reliable. I had to correct him and say that the Nissan GTR is a very reliable car. By the way the Nissan GTR R33 is one of my favourite cars of all time. If I could I would buy one.

In this episode of mighty car mods..... I mean.

What does his plates JET014 mean?

@MotiveVideo

5 жыл бұрын

Joseph Young we have “Jet” numberplates on all our cars as the business is called Jet Multimedia and Andrew used to be In the Airforce. And already owners JET014 plates so no one else would get them to match his JET200 plates. When he bought the GTR he threw them on temporarily but never changes them.

Where’s the s14 been lately??

@MotiveVideo

5 жыл бұрын

Waiting on Nitto SR20 billet oil pump. Pulled engine out in April and been waiting since

Smart move. If I had a tall garage, Id 100% but a hoist/lift. For now, my Quickjack does the job. But nothing beats being able to stand under your car while working.

@brettus9115

5 жыл бұрын

I looked at the Quickjack but didn't think it was high enough to swing around underneath? I saw Marty from MCM in an episode using one while making an exhaust and thought my fat arse would have trouble fitting under it on a creeper! My shed won't have the headroom for a full size two post so I'm looking at the scissor lifts atm

@spazda_mx5

5 жыл бұрын

@@brettus9115 They don't get you a mile off the ground, but they are certainly better than jack stands for those of us who can't have a proper two post lift, plus they are portable so you can possibly take them to the track/wherever as well (although probably only of you tow your car with a van/truck). I have a vid on my channel that gives an idea of how high it goes.

@herohoistsaustralia4502

5 жыл бұрын

We now have storable/portable 2-Posters that need no more than 2.0m to install... and they lift to approx 1.50m. If you add the Truck Adaptors - you can get a little more height out of them - simply take the posts away after you're done… Average installed height on a floor-plate model is about 2.80m. Or, our Single-Post Portable Service Hoist needs about 2.67m. Very cool, popular hoist - but more expensive... 1/3 the footprint of a 2-Poster. Check out the gallery page that runs off the description...

@brettus9115

5 жыл бұрын

@@herohoistsaustralia4502 Cheers mate. I did look at the single post but stretching to the other side of the car may obstruct some items requiring service under the car but I didn't think to much on it. I will check out the low hoist though but thanks for the reply

I had to laugh at the Ozito drill. I got the same one but its sub standard hammer drill is too slow on concrete. It really needs to go in the bin.

@MotiveVideo

5 жыл бұрын

Hey, wasnt us using it

@sexatica

5 жыл бұрын

what works works , but still funny

@MrGtrjason

5 жыл бұрын

I got Ozito dedicated hammer drill.bit larger than that one.had it years.carves through concrete like butter.built my whole shed with it.my hoist.and about 10 other mates shit over the years.still going strong.best cheap hammer drill ever.

@raddeal1

5 жыл бұрын

Bunnings screw drivers as well 😆

@brettus9115

5 жыл бұрын

@@MrGtrjason Mine also does the job with ease. Chopped down one of the house concrete posts like butter with the jackhammer setting also. They just work and for the price why wouldn't you with the warranty they also give!

ive got an old screw hoist 😉

cant reach the website for the hoists , they have exceeded their bandwidth lol

@herohoistsaustralia4502

5 жыл бұрын

Sorry about that - fixed now - we put a few mp3's on the pages (to enhance the viewer's experience... LOL) and apparently they chew bandwidth to the extreme - so I deleted the 30min Kraftwerk mp3 and replaced it with a sweet Ry Cooder track on the Gallery page... Hopefully, that will fix it... Of course, now I expect a whole heap of comments about my musical taste... :)

About fukin time dude 😎

OMG put BT1 engine now fully uleh!!

I have 3 phase at home much better also most people rent so installing a hoist at home is out of the question you'll need a tall garage too lucky i don't have any of these issues hopefully I'll finish the extension too my garage

flexin on the MCM crew... lmfao

@MotiveVideo

5 жыл бұрын

FukU2222 huh?

@wrx2hot4u

5 жыл бұрын

andrew doesnt understand young speak, give it to him in english brah.

@FukU2222

5 жыл бұрын

The little boys only have the wee quick jacks - you lot got a full two-post :P

@FukU2222

5 жыл бұрын

Only (half) teasin' anyways Andrew. No worries m8, cheers n take care. From Vinland

Nice youtube tax write off! hoists are awesome

#Mint

You guys call car lifts hoist? Lol

@MotiveVideo

5 жыл бұрын

Are Americans the only people that think its funny that other countries might call something by a different name?

@Odium2006

5 жыл бұрын

You're really going to love it in Summer when Andrew starts wearing thongs

@MotiveVideo

5 жыл бұрын

Simon Henman 😂😂😂😂😂

@bevan5441

5 жыл бұрын

I fucking love my thongs on special occasions

@taitran1987

5 жыл бұрын

hoist /hɔɪst/ verb 1. raise (something) by means of ropes and pulleys. synonyms:raise, raise up, lift, lift up, haul up, heave up, jack up, hike up, winch up, pull up, upraise, uplift, elevate, erect; noun 1. an act of raising or lifting something.