Love your dad.. I hope you guys enjoy every minute with him. I lost my pops 10 yrs ago and not a day goes by without thinking about him..I would give anything to have another day with him....

@Me-gy3xm

2 жыл бұрын

Shut up

@danybosse2732

2 жыл бұрын

Love your dad, this is the best life to be able to enjoy things with your dad:)

@504DamnSkippy

2 жыл бұрын

I know the feeling. We were lucky we had good Dads not everyone can say that unfortunately.

@felixguzmanmartinez1573

2 жыл бұрын

Thats messed up. dont talk about people dying when they are still alive.

@liamjhogan

2 жыл бұрын

Pops intro 🔥

I have a portable saw mill. I recommend that you use only water. It is only meant to cool the blade, not lubricate it. If you use any oily substance, it will cause the blade to be slick and slide off the wheels. It will also stain your wood.

@elrey327

2 жыл бұрын

What you said ☝️

@joegarage6132

2 жыл бұрын

I have cut wood for over 5 years and laughed when they said that one...but they are now selling off branded of sawmills for 15 grand so what do I know, train wreck, ..read the instructions it should tell you that..kinda scary funny...Oh blade is sharp caution. watch Norwood video on how to run a saw mill....they make sawmills also... mine is larger and was cheaper that they price they quote and yo had to put it together too, I used my trailer as a work surface to get the frame straight, then slid it off when I got it secured...

@woodrage1

2 жыл бұрын

We used Diesel in the winter to avoid freezing. It was years ago though.

@ZannkyOG

2 жыл бұрын

Didn’t know this, but this sounds right.

@devinb5937

2 жыл бұрын

This is not true at all

I sure did love seeing Pops doing the intro! You guys are great! The diversity of your channel is amazing...cars, helicopters, houses, saw mills, boats....! Keep up the good work!

@stefanegger

2 жыл бұрын

the rich have it

@stevesamuel6603

2 жыл бұрын

that's what I'm talkin' about , GOONZQUAD for the win!!!

@Mike-tz9mu

7 ай бұрын

clearly hard work pays off doesnt it@@stefanegger

I have run this type of saw for over 36 years. Make sure your guide rollers are very close read manual for setting. After you have cut your plank you will need to air dry. Stack the lumber planks with small stickers of the same wood type or you will get a shadow on the boards. Cover stacks with a tarp also after a month or so spray paint on the ends to keep the wood from splitting and stop adding moisture . When installing pilot holes and screws.

@lordjoelcox786

2 жыл бұрын

Hi Bill, Any idea what brand this saw mill is? All the best Joel

Love seeing your dad so involved in your lives and channel. Cherish this time. not everyone gets this opportunity.

@NotMyAccount

2 жыл бұрын

From what I noticed, when he got a work truck, he wa still working for some other company, I hope im not mistaken and since he began being more present in the videos he joined his son's

@musikdrengen02

2 жыл бұрын

@@NotMyAccount i think he meant to go solo, having driven truck for a long time.. but it seems hes joined his sons past year or so

@nickgreen8950

2 жыл бұрын

Yes more of your dad!!! He is awesome!

@fliffahnilsson6614

2 жыл бұрын

check the goonsquad unleashed / behind the camera channel, pops is overlooking most of the building they do, so feels like hes on the payroll too

@ville992

2 жыл бұрын

@@fliffahnilsson6614 she is on payroll

Use straight edge across 4 points on pulleys even a string. Torque the bearing bolts to spec. Also make sure pulleys are laterally level. Blade needs to be Torqued to spec. Then there should be a nut you set for the blade, like a jam nut. But it's set so you don't have to retorque every time. Use water and soap. I work in large sawmills and paper plants. I'm a Millwright. I also build portable sawmills.

@davidgreenwood8880

2 жыл бұрын

Hire this guy to set it up right.

@MegaGsizzle

2 жыл бұрын

What do you think of the quality of the saw mill.

@jeffsharp9824

2 жыл бұрын

Yea water and soap is all i have ever used the diesel was a new one on me!

@lawrencejackson4001

2 жыл бұрын

How much do you charge too make one?

@garycorbett148

2 жыл бұрын

As the millright stated, proper torque is essential, as is alignment. Then you get to the saw blade. It must be properly set, no flexibility in alignment and tension. A grand to have it properly set up, and learning the ins and outs of sawyers would be extremely helpful for the future.

When you start getting a bunch of that lumber cut, don't forget to let it season. I would highly recommend you put a light coat of paint on each end of the boards you cut before you season them. It prevents the ends from drying out and warping the boards.

That was a great intro. Great health to your Dad! Stay safe and be well.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Sawing with Sandy on KZread, goes over adjusting a new mill, easy to understand, and goes into why you do it. Think of it like doing a wheel aligment on a vehicle, you need to get the camber just right. Love you guys, watch out for your log stops, lol you will hit one at least once, everyone does.

@TheBuildSpot

2 жыл бұрын

I’ve hit my log stops more times than I’d like to admit 😂

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Hey guys, validate and cherish every single moment with your pops, he wants to be involved in your lives and there is nothing any better. A lot of us never had that chance for one reason or another. Keep him close and you'll never have any regrets. Pops, YOU THE MAN!!! 👍👍🇺🇦

Paint the ends of the wood to help with checking (cracks in the end). Stack the slabs on a level surface with small 1x1 or so spacers called "stickers" between them. Let them sit and dry out. If you cut and install them imediatly you will get a lot of movement in the wood causing cracks and warping.

@cwglen

2 жыл бұрын

Danny I too am getting a reply saying I've been picked as a winner.

@gkountry664

2 жыл бұрын

@@cwglen scam

@2H80vids

2 жыл бұрын

@@cwglen It's not that hard really. IT'S A SCAM. It says in every comments section that it's a scam; these two have mentioned in videos that it's a scam and, just to make absolutely sure - it looks like a ******* scam.

Man... Pops is amazing! Loved the intto. So cool to see him working with you guys! I have been a follower for years and can only say thank you. Tuesdays, Thursdays and Sundays are the best days.

I just love the difference in pops on the channel. He used to never talk or even want to be on camera!! So awesome!

@travisash8180

2 жыл бұрын

It's really good to see Pops sober !!!

@devilmonkey

2 жыл бұрын

Seeing pops not wasted and being violent makes my heart warm

The introduction was absolutely priceless, LET'S GO GOONZQUAD!

@Simon-gb9es

2 жыл бұрын

The journey they've made is epic, and seeing their father being more involved is so nice to see

@travisash8180

2 жыл бұрын

It's good to see Pops sober !!!

@maxnex7676

2 жыл бұрын

@@travisash8180 what trash trolling are you writing, completely out of order.

@brendinely

2 жыл бұрын

@@maxnex7676 it not the first time he posted something dumb click on his profile and it will bring up his comments

@tommyfacer3206

2 жыл бұрын

Love pops hes the man

Brother you all started these videos with your dad .that's so awesome 👌 me being a dad means alot our kids are our pride n joy...love u guys keep up the good work..ur dad has a big part of me still watching 👀 ur videos...

love seeing pops do the intro! he always is in a good and happy mood! cherish the time you have with your family its all that matters at the end of the day!

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

You need to put the blade back on the bandsaw, torque the tension to spec and turn the wheels by hand and adjust it (there is 4 bolt around the metal that hold the shaft of one of the wheel, they are for adjustment) until it stay in the center of the wheel. Adjust the support bearing so it almost touch the blade. I would definitely watch some Bandsaw tuning video if I was you. This can be dangerous, these blades snap and cut arms, so safety first ! Replace the diesel by water, it's just to cool the blade, not lubricate it. Diesel is an oil and we put oil on wood as varnishes !

@ralph_m31

2 жыл бұрын

Is the settings different per log?

@WriterandPhotographer

2 жыл бұрын

Hope they read your comments...........so much professional, experienced advice that often gets overlooked

@MihailBFC

2 жыл бұрын

water and a bit of soap to lube and cool the blade

@MihailBFC

2 жыл бұрын

@@ralph_m31 no, is standard but you can use different blades for different wood types

@fisherus

2 жыл бұрын

Do you really think that these two have enough IQ between them to figure out anything? I lost it with their descriptions of how it worked and making money?

Mann I just love your Dad !! Glad he is getting more a more involved in your videos, he looks so proud of you guys and he sounds so genuine and humble what a great guy !!

Love seeing Pops do the opening....really cool seeing you guys getting him involved in the channel.

Having your Dad participate and be part of the channel is so awesome 😎 reminds me of me and my brother and dad working on things ha Iam sure he is proud that his son's involve them in their work and it's very heart warming to see a family work together you don't see that often now days much respect!

The lubrication is for when the blade goes thru wood. The blade does not have to be lubricated on the pulleys. If you tension it to the correct specs and its still keeps falling off, i think it would be because of diesel. You should try adding water/dishsoap or water/pinesol. Usually its 1/4 detergent for a tank of water. You can premix a 5 gallon. I usually do 1 1/4 cups of detergent in 5 gallon of water.

@gregkrueger331

2 жыл бұрын

Yep, came to same basically the same thing.

@fopeezy3097

2 жыл бұрын

Who else came to the comments to see guesses as to why it kept slipping? I just know a bunch of dudes run sawmills and know whats up.

@hpw59

2 жыл бұрын

Looks like the generic version of the Woodland Mill

@markobenkovic2015

2 жыл бұрын

Try normal chainsaw oil to lubrikate.... Is better than diesel bro what a goof puts diesel .....

@chillax498

2 жыл бұрын

Lubrification? Is that even a word. 🤔😅😅😅

You will need to dry that wood to use it. Otherwise it will twist and split. Look online on how to build a passive wood drying kiln. You will also want a moisture gauge to test when it is ready to use. If used for flooring, you will want to let the dried wood settle for a week or more in the conditioned space it will be installed prior to installation.

@eldnah2

2 жыл бұрын

I was wondering when somebody would bring this up

@eclifton4070

2 жыл бұрын

@@eldnah2 Woodworking is new to them. The bigger question would be, why hasn’t someone already pointed this out? Clearly several commenters know something about milling wood. Anything we can do to point them in a good direction.

@Mongrel85

2 жыл бұрын

It’s like a year for every inch of thickness

@devinb5937

2 жыл бұрын

This is not true at all!

@eclifton4070

2 жыл бұрын

@@devinb5937 what isn’t true?

Love paps start the video he is so happy to comment this new video am glad that I can see you work together like a real team that’s what family is all about blessings from 🇲🇽

Well done pops .You finally made it to the top job .You put a smile on my face every time i see you pops .Well done to the boys for involving your parents in your success .I wish you two and your family all the best of health .

@user-uf9tm8iq9r

2 жыл бұрын

* You have been 👆👆picked among our fan for today presentation 🎁👆👆👆!

Thumbs up for pops! The intro, the neck dance, the quality time with his sons! Molitetz!

POPS you nailed it, a star is born!!! Thumbs up on this one! A family that plays together stays together

Its nice to see your dad in videos same with mom you support each other and thats what family about. All the best and keep it going!

Love your Dad and his spirit. He is a hard worker from watching your prior videos. Very smart guy!

Pops is the man! He's truly the backbone of your operation! Keep up the great job pops, representing all of us old guys everywhere!👏👏

Man I'm glad y'all give pops the spot light to do the introduction to the video 😃👍

@Hi-bf4ft

2 жыл бұрын

kzread.info/dash/bejne/p4193LyTh5u0oKw.html Finally it's here.

Love seeing Pops leading off the video! Keep rocking Pop's! You put a smile on my face every time you're in a video. Congratulations on making it this far in life and blessings for your future.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Pops has become such a large part of this channel. So knowledgeable about a lot of things. He is never afraid to get his hands dirty. He should have his own builds, no matter what it is. He will build it or fix it. He has built so many memories already. The day will come when he will be gone and those memories will be his greatest legacy. Mom is right there beside him. These two sure did a great job raising their family.

Buy the blades by the Dozen. Use water and soap for the drip lubricant. Cut half the speed when on Hardwood.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

I really enjoy seeing your father in the videos! He is one cool guy. It's great to see him working on projects with his sons. You all know the meaning of family. Even your Mom is cool to see on the channel as well.

Great opener Pops! I really love the family vibe your family has.

Dudes. Your dad doing the intro was so cute and heartwarming. Cherish this man!!!!!

This is the best video you 2 have released. The smile on his face priceless. Only a father knows that smile means how proud he is of both you to the world. As 1 pops to another you did a great job with your family. You and your family is what America’s back bone really is. 👍👍

A very nice introduction with your dad guys.Love seeing him on the channel. A vary hard working man.God bless him always .I never miss and episode. You guys rock.Keep up the good work.May the good lord bless u guys always and your family. Looking forward to more great videos. May yu guys be always successful in life.Peace..

The snow sled shed is coming along nicely. Looks like it'll definitely be ready by winter to slide down the mountain. Also can't forget about the great view of the trees it will have due to them perty windows.

I wish I had such a relationship with my dad as you do. I’m sure I’m not the only one. Much love ❤️

i watch Goonzquad like it’s a tv show, Never miss a episode! i’m hooked! 🎉🚫🧢

@marcomartinez9420

2 жыл бұрын

Same here

@samgimhana153

2 жыл бұрын

Me too .. I dont know When probably 3 years ago .. since they re bult subaru wrx I never miss any episode

@Hi-bf4ft

2 жыл бұрын

kzread.info/dash/bejne/p4193LyTh5u0oKw.html Finally it's here.

@Jjay-tw1yy

2 жыл бұрын

great show lol👍🏼

It’s nice your dads involved with everything you guys are doing. Good to see families helping each other.

I love it that your Dad is involved in everything so much.

@GEN_TRY_SON_TRUCKING

2 жыл бұрын

Thanks for participatetion and comment♥️ you have been randomly selected among winer's for today hit me up🔝🔝🔝to claim your reward 📦📦📦📦

Love seeing pops doing the intro, and helping!

AWESOME intro, what a beautiful surprise. Thank you for including "Pops" in the intro. It really show how much love you guys have and how important he is to your guys success.

@devilmonkey

2 жыл бұрын

If it wasn't for pops these guys wouldn't even be here, he is the real og

You are so lucky to have your dad - it's truly beautiful to see him doing the intro.

Great to have pops do the introduction, your mom is some cook. Great to have your family involved in the video. Keep it up.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Hopefully you can get it completely fine tuned. I have to mention again… I love seeing you working side by side with your Pops. It reminds me of mine. He came to the U.S. at a young age and lived to be eighty six and still had a very strong accent. I have been watching your videos from the start and I’m never disappointed.

I instantly liked the video after pops got to do the intro! That man is living his best life with his great family!

My father-in-law milled the logs on his own property, and used them for the floor of his new house, totally awesome having a small portable sawmill

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

@samkostos4520

2 жыл бұрын

That's a long process to properly cure dimensional lumber to a grade wherein heat/cold deformation would not render it unusable. Good luck thou.

@pellabandgeek

2 жыл бұрын

@@samkostos4520 it's only a year for each inch of thickness.

Love the start of the video having pops started off man he's righteous man love that dude need to see more of him in the camera

Best intro ever with your dad! God Bless you guys

@text-us-now

2 жыл бұрын

👆🏻👆🏻You have been🔝🔝🔝picked among our fan for today presentation.👆🏻 Contact us up 👆🏻

Pops is such a great help to you all! The new sawmill setup is awesome! I'm sure you guys will get the problem sorted out and get it running 100%.

Love Fact that pops heavily involved in the day to day Operations of Goonzquad Boy'z keep the content up.

Yay papa goonzquad! So glad he is doing good. I hope the blood pressure is ok now and don't work him too hard. He loves working with ya and it shows~❤

I absolutely love pops intro we need more of that🥰

Y’all really take on anything, I love it 👏🏼

@hectorverrelleza3257

2 жыл бұрын

I watch both there channel and yours & thought it was funny since yall are from the same place lol

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Hey guys! Just a little information about the saw or any saw for that matter. There should be a bolt, screw, something that adjusts the wheel of the saw blade because it should tilt in a direction to make the blade run straight and not run off the wheel. Good luck y'all! Awesome video again!!

OMG!!!! Pops intro… I’m so happy you guys did that

that made the whole video for me him starting it off that was so amazing!! DANGGGG THATS LEGIT!!

@text-us-now

2 жыл бұрын

👆🏻👆🏻You have been🔝🔝🔝picked among our fan for today presentation.👆🏻 Contact us up 👆🏻

Just a wood working note: to avoid warping and shrinking you should allow milled wood to air-dry for 6 months or so. I do understand the eagerness to put it into use. 😀

@chadwickhayes8260

2 жыл бұрын

Ignorance is impatient

@devinb5937

2 жыл бұрын

This is not true at all

@robertmccully2792

2 жыл бұрын

Built a hundred house with wet wood. Butt joints you need dry.

@lastofthebest5102

2 жыл бұрын

Green wood can be used without warping and cracking. Always laughable how many ignorants like comments like your having never even seen a sawmill.

@mertonallowicious

2 жыл бұрын

Amazing how many green wood lovin weirdos crawled into the comment section on this one- what have any of you clowns made out of green wood that stayed stable??

I truly enjoy the way the boys have so much respect for there family!!. I lost my father unexpectedly he was just 52 healthy. You aren’t ever promised tomorrow & we get so caught up in day to day life. If you have a good father make the time to do something you both enjoy.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

You guys have a good dad. Definitely makes me miss my own.

My favorite KZread channel.....sure, I dig the builds, but the best part is watching you guys being able in enjoy time with your family. I pretty much don't care what you build....cars, trucks, houses, whatever- I just enjoy watching you 2 guys hanging out and enjoying time with your family. Fan for life :-)

Nothing worthwhile is ever easy. It seems like you guys did well in assembling the sawmill. Pops is getting more camera friendly and it’s awesome to watch.🤙🤙

Man you guys are great as a team love to see it. We all have challenges in life and its good to see how you guys support each other, keep it going!

Great to see your dad doing the video now he is part of the team great job to your dad

On all bandsaws the drive wheel is fixed. The other wheel is adjustable. Usually has a knob that adjusts the angle of the wheel. Put on the blade and ajust the tension. Turn the wheels and blade by hand. Turn the adjusting knob until the blade stays in the center of the wheel. Use a straight edge across both wheels to be sure that the are in line with each other.

Just so you know, you need to allow plenty of drying time for any lumber you cut. You need to stack it properly with spacers to allow for ample air flow. General rule of thumb is to allow 1 year per inch of thickness for drying. If you use the wood when it’s still green, you’ll get a lot of shrinkage, warping, twisting and cracking. It may look fine at first, but it’ll start looking terrible and affecting your construction as it dries.

@waynespyker5731

2 жыл бұрын

Content only...... drying time not permissible. Can't even align the blade to track.

@hazard.33

2 жыл бұрын

@@waynespyker5731 they are content creators.. cant expect them to do everything perfect.

@michaelyackovich155

2 жыл бұрын

@@waynespyker5731 agreed, I’m surprised they are not on Tik Tok, they lost there way a long time ago, now to them it’s all showmanship, if they break something, they don’t care, they get tons of views and that equals KZread $$$$, they have sketchy work ethic too on some things, some of the stunts they were pulling on the big shop build would have gotten them fired, but like I said, it’s all for views now, purely entertainment, that’s why I prefer VTuned over them, he does more work in one video than they do in a month of videos

@dannyheatherlover9054

2 жыл бұрын

If you are timber framing like they will be, you do not want the wood dry. After the structure is built, the wood will all dry out together resulting in less distortion. You will only want to dry out the wood if you are making slabs or thin boards.

@johnpearson4533

2 жыл бұрын

@@michaelyackovich155 shut up Karen you nag.

Your dads a legend I know the start wasnt easy for him but smashed it 💜

@77timotheus77

2 жыл бұрын

Yep. Brought a huge smile when I saw him introducing :)

@travisash8180

2 жыл бұрын

Pops was smashed ???

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

That’s awesome to have pops introduce the video! 👍👍👍

Take it apart, and reassemble it at the shop on a level surface. Use the soap-n-water as others have recommended and then transport the wood to the shop so that you can stain the cuts there as well.

The Wood Mizer sawmill uses a Koehler motor for their engine. The Wood Mizer is a pre assembled unit. It is a professional sawmill. Many people use the Wood Mizer to build their houses and sell wood to the public. Check it out!

@jaymoore7011

2 жыл бұрын

If the boys enjoy cutting wood, and they want to keep doing it in the years to come.... For Sure, they should get a Wood-Mizer mill. They are way better quality and they are built in Indianapolis USA. They could sell this lego set mill and get a mill that will last them for decades, and they can cut lumber with it instead of having to tinker with the mill all the time trying to make it cut. Two cuts in, and they are already having to tinker with the mill before they can cut wood. Plus the service and support from Wood-Mizer will not be beat by any other mill manufacturer out there. Cutting your own lumber is so rewarding and fun.

@beckyumphrey2626

2 жыл бұрын

We have had one on order for 7 months. Huge backlog.

@jaymoore7011

2 жыл бұрын

@@beckyumphrey2626 Worth the wait for sure.

Sawmill you guys are amazing I’m in awe….. Truly an inspiration we can do anything we want to do if you just commit and have faith…..Thanks for the inspiration and great content….

Pop’s intro was fire!!!!! good job. we need more of that 🔥

I think that your dad win the lottery with you guys :) You are keep going and he can just chill, help and play with all the stuff and be with you whole the time. Best thing ever ;)

Your Dad did a fantastic job on that intro! I absolutely love how you all work together. Really reminds me of how dang much I miss my Dad! Also we need more Dobie content :) Dobies are just such amazing dogs.

@IhateYoutube

2 жыл бұрын

@DON'T WATCH MY VIDEOS Don't worry, I won't :)

So awesome that dad did the intro. You guys are so blessed to have him and helping you with everything you guys do.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

As an Australian I know JACK SIHT about wood saws, but I really hope that you can get it dialled in, cause you boys are living the DREAM, your father is a freaking legend, I wish my dad was still alive, great video men, love everything you champions do 👍🏼👍🏼👍🏼👍🏼🇦🇺🇦🇺🇦🇺🇦🇺🦘🦘🦘🦘Cheers from Melbourne Australia

Loooove seeing the intro from pops! Also cant wait to try the Dang Sauce!!! Glad it’s now on amazon.

You guys are doing a GREAT job. Nice to see Pops getting into it more :)

Dad killed it with the intro… love it guys keep up with the builds!!

Dad goes bang at the start -- love it!

Pops is the man! Cherish those moments!

You Will Need 1 Or 2 Log Turning Tools" Cant Hook " or "Log Peavey" Definitely A Must... Good Lock... Sawmills Are Alot Of Work 🙂

@user-uf9tm8iq9r

2 жыл бұрын

* You have been 👆👆picked among our fan for today presentation 🎁👆👆👆.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

Probably the best intro to a video ever lol love to see pops working with you guys

Pops doing the intro was the Monday morning pick me up I didn't know I needed.

So proud of you guys having dad with you Family first

@text-us-now

2 жыл бұрын

👆🏻👆🏻You have been🔝🔝🔝picked among our fan for today presentation.👆🏻 Contact us up 👆🏻

I would NEVER drip any oil based liquid on my lumber. Especially diesel.

@Ronskutin

2 жыл бұрын

That Telegram comment is from scammers, do not contact them. Real Goonzquad has nothing to do with it.

@goleafsgo8496

2 жыл бұрын

My immediate thought when I heard Deisel was won't that stain your finished product? So I'm with ya has to be something a little less toxic as well to be dripping all over the place?

@eiserntorsphantomoftheoper2154

2 жыл бұрын

@@goleafsgo8496 And it would make your sawmill smell like a Truck stop

For $10,000 you could have had a welder, tools, blueprints, and a sawmill. Builing your own anything from scratch has so many advantages.

I love having your pops doing the intro! from now on he needs to be the Intro man!

At this point I feel like there’s three boys now. If dad’s doing intros then he’s 100% invested. I love it. WE WANT POPS MERCH!

@text-us-now

2 жыл бұрын

👆🏻👆🏻You have been🔝🔝🔝picked among our fan for today presentation.👆🏻 Contact us up 👆🏻

You will brake blades FYI you can re weld them and sharpen them Great seeing pops more and more Enjoy the time spent Good on you two

@Matthew Cremona uses carbide tipped bladed. Seems to work better when you hit metal. Water is fine for cooling the blade, slight dust control. You need stickers to place between the levels of boards you cut.

@Danman1972

2 жыл бұрын

Cremona is one to watch for sure. I'm sure there is an alignment procedure listed in the manual for that saw as well as tension. Good blades along with proper alignment and tension will likely go a long way to making it easier.

You got a thumbs up just for the intro!! Love it!! Love seeing pops involved!!

Pop's taking over the channel! Always happy to see the family

You’ll have to watch ‘Out of the Woods’. Nathan is just down the road from you guys. That blade will last until the first screw/nail in a log. Metal detect every log before cutting. Have fun!!! Props to pops!!! 👏👏👏👏👏 Be sure the blade guides are snug as the blade will rock off when running.

@titanicfilmsbymark

2 жыл бұрын

He's in Tennessee near Churchill as well. Local for these boys

@motofarmmx2430

2 жыл бұрын

That blade will not last that long. It will need sharpened. That all depends on the wood and log condition. Also it will stretch. Judging by the mill I doubt its a quality blade either.

You could build an nice wood wall structure behind the man cave to stop the landslide that way its all natural looking and can attach a balcony if needed

Really talented pops i love his energy lots of love and support.

Love Pops doing the intro!!! Awesome.