WELCOME Back everyone - let the body work begin!! The joys of body work, body filler, sanding, and dust has arrived. i also do a realistic cost to this point of the build.
Жүктеу.....
Пікірлер: 21
@stuarterskine7745Ай бұрын
Great work Lee, love your thinking outside the box to get things done, use of the sheeting was brilliant! Also love reading your answers to people's comments. Keep up the great work
@goldshiftgarage
Ай бұрын
thanks Stuart im glad your enjoying the build! yeah i was hoping the shape of the off cut was close and lucky for me it was a great fit with a little bit of tweaking & shaping. thanks for your support i really do appreciate the comments 👍
@6DoublesixАй бұрын
Yep that's lead on the roof join, will be some above the tail lights aswell. Most people say burn it off and use filler but I just leave it. Looking good so far, keep at it.
@goldshiftgarage
Ай бұрын
thanks for the info mate, appreciate it. yeah i think i will leave it also i mean its super smooth on the roof. thanks for the support - its finaly coming together
@nathanobrien6875Ай бұрын
Making great progress mate
@goldshiftgarage
Ай бұрын
thanks mate, slowly but surely chipping away.
@TwistedMetalCustomsАй бұрын
oh i cant wait mate, its looking great! haha yeah the engine build will add a buck or 2 to the build cost!
@goldshiftgarage
Ай бұрын
thanks mate she is certainly progressing. im preparing for the over cycle to come once i hit the engine build haha
@oo0Spyder0ooАй бұрын
Yeah the roof has lead on the joins to the frame, also bronze on the A pillars. Some used it as a filler so that might be why it’s down the rear end, don’t think that’s from manufacture.
@goldshiftgarage
Ай бұрын
thanks for the info mate, appreciate it. hows your build coming along?
@TravisBarnett-ne3qsАй бұрын
this thing needs a LS and a full Haltech system
@goldshiftgarage
Ай бұрын
maybe one day Trav, never know whats around the corner
@markelliott6370Ай бұрын
Yeah mate lead You should epoxy your progress as you go
@goldshiftgarage
Ай бұрын
thanks mate, i thought it may of been lead but wasnt 100% sure. when i get home i will re-epoxy but just ran out of time. thanks for watching
@drifterdrifter9558Ай бұрын
To much fishing not enough car work 😂😂
@goldshiftgarage
Ай бұрын
hahahah i wish that was the case lol
@drifterdrifter9558Ай бұрын
Stinking cat. Good bye.
@goldshiftgarage
Ай бұрын
hahaha
@job7016Ай бұрын
G'day there mate, I like your work! I'm up to the same stage and using the same procedures you are, I'm just not sure if I should put the filler onto bare metal or over the epoxy? Does it really matter or just scuff the epoxy up then fill over that? Cheers! 👍🇦🇺
@davidbrowning6284
Ай бұрын
Don't put filler over bare metal, it won't stick to the metal and will trap moisture , apply over the apoxy primer
@goldshiftgarage
Ай бұрын
thanks for watching mate, i would / did put the filler over the epoxy. i did slightly scuff it but not enough to break through the epoxy. once you apply the filler & sand you can always respray over with epoxy to protect the bare metal you have rubbed off during sanding. I have learnt so much during this build.
Пікірлер: 21
Great work Lee, love your thinking outside the box to get things done, use of the sheeting was brilliant! Also love reading your answers to people's comments. Keep up the great work
@goldshiftgarage
Ай бұрын
thanks Stuart im glad your enjoying the build! yeah i was hoping the shape of the off cut was close and lucky for me it was a great fit with a little bit of tweaking & shaping. thanks for your support i really do appreciate the comments 👍
Yep that's lead on the roof join, will be some above the tail lights aswell. Most people say burn it off and use filler but I just leave it. Looking good so far, keep at it.
@goldshiftgarage
Ай бұрын
thanks for the info mate, appreciate it. yeah i think i will leave it also i mean its super smooth on the roof. thanks for the support - its finaly coming together
Making great progress mate
@goldshiftgarage
Ай бұрын
thanks mate, slowly but surely chipping away.
oh i cant wait mate, its looking great! haha yeah the engine build will add a buck or 2 to the build cost!
@goldshiftgarage
Ай бұрын
thanks mate she is certainly progressing. im preparing for the over cycle to come once i hit the engine build haha
Yeah the roof has lead on the joins to the frame, also bronze on the A pillars. Some used it as a filler so that might be why it’s down the rear end, don’t think that’s from manufacture.
@goldshiftgarage
Ай бұрын
thanks for the info mate, appreciate it. hows your build coming along?
this thing needs a LS and a full Haltech system
@goldshiftgarage
Ай бұрын
maybe one day Trav, never know whats around the corner
Yeah mate lead You should epoxy your progress as you go
@goldshiftgarage
Ай бұрын
thanks mate, i thought it may of been lead but wasnt 100% sure. when i get home i will re-epoxy but just ran out of time. thanks for watching
To much fishing not enough car work 😂😂
@goldshiftgarage
Ай бұрын
hahahah i wish that was the case lol
Stinking cat. Good bye.
@goldshiftgarage
Ай бұрын
hahaha
G'day there mate, I like your work! I'm up to the same stage and using the same procedures you are, I'm just not sure if I should put the filler onto bare metal or over the epoxy? Does it really matter or just scuff the epoxy up then fill over that? Cheers! 👍🇦🇺
@davidbrowning6284
Ай бұрын
Don't put filler over bare metal, it won't stick to the metal and will trap moisture , apply over the apoxy primer
@goldshiftgarage
Ай бұрын
thanks for watching mate, i would / did put the filler over the epoxy. i did slightly scuff it but not enough to break through the epoxy. once you apply the filler & sand you can always respray over with epoxy to protect the bare metal you have rubbed off during sanding. I have learnt so much during this build.