No video

Waves SuperRack Performer Latency with the Behringer Wing

Waves SuperRack Performer and the Behringer Wing work really well together with the 48 in / 48 out USB interface. In this video I measure what the Waves SuperRack Performer Latency is with the Behringer Wing.
Check out Waves SuperRack Performer: waves.alzt.net...
Chapters:
00:00 Intro
00:15 Latency Overview
02:36 Buffer of 32 - Waves SuperRack Performer Latency
03:53 Sample Rate Matters!
04:45 Buffer of 64
05:10 Buffer of 128
05:33 Buffer of 256
06:15 Using Double Patching to Overcome Latency for Monitors
07:28 Buffer of 2048 - Usable with Broadcast!
10:09 Using High Buffer Size for Broadcast with Waves SuperRack Performer
10:43 SuperRack Performer Latency with FOH
13:19 Conclusion

Пікірлер: 14

  • @attacusgrey
    @attacusgrey9 ай бұрын

    Any chance you can do a video on separating out the audio for IEM’s without Waves? Thanks!

  • @jasonlapasinskas5302
    @jasonlapasinskas530211 ай бұрын

    I thought the pick point for the cards on the Behringer stuff was straight of the preamp. Does the Wing have actual inserts that allow you to insert the cards i/o in the channel. Otherwise aren’t you still are sending a double patched channel the rack signal as well?

  • @AudioEmpire1
    @AudioEmpire111 ай бұрын

    Thank for explaining

  • @gboyega
    @gboyega11 ай бұрын

    Hi @drewbrashler I have a X32 with a snake cable box with 8 outputs on stage, i also have the sd16 for an additional 8 outputs. How do i route my mixer to take the first output from my xir output and the other 8 outputs from the SD16 stagebox output.

  • @winstonphilip9231
    @winstonphilip92317 ай бұрын

    Drew. Can Ultranet can act as that double patch for monitors?

  • @DrewBrashler

    @DrewBrashler

    7 ай бұрын

    I would be interested to see what you are trying to do. Ultranet is 16 outputs, you can get the DN4818-O sweetwater.sjv.io/VmyKVa if you wanted to convert the 16 Ultranet outputs to XLR outputs. Then depending on how you route it, it could be really whatever you want to use it for. For instance you could have it as a digital split to give 16 channels of outputs right after the preamp, or you could use it as 16 outputs. Hope this helps!

  • @clash_new_taipei
    @clash_new_taipei11 ай бұрын

    with Dante card how much latency does it reduce ?

  • @magoostus

    @magoostus

    11 ай бұрын

    sadly, dante virtual soundcard actually increases latency worse than USB.

  • @clash_new_taipei

    @clash_new_taipei

    11 ай бұрын

    @@magoostus no I actually meant the Broadwayii card that can’t be installed on Wing

  • @magoostus

    @magoostus

    11 ай бұрын

    @@clash_new_taipei "brooklyn3" and as far as I know, the brooklyn3 module works fine in the regular expansion slot, we're just waiting on new firmware for the internal slot

  • @magoostus

    @magoostus

    11 ай бұрын

    @@clash_new_taipei Broadway chips can only do 16in/16out. so it cant be a broadway chip... unless they're using 4 broadway chips together

  • @magoostus

    @magoostus

    11 ай бұрын

    @@clash_new_taipei I have good news. the Brooklyn3 Module works mounted in the internet slot!!!

  • @alpineaudiovisualstream
    @alpineaudiovisualstream11 ай бұрын

    IEM or floor monitors, it doesn't matter. Once, you go pass 4ms it's no good.

  • @16LiveRecords
    @16LiveRecords11 ай бұрын

    Omg! This latency is absolute useless. What are you going to teach your viewers?😱