Yes! You give a step-by-step in a way that is understandable and easy to follow. You even tell people that they don't have to use a Cricut, if they don't want to. Please keep doing tutorials! Please.

Excellent tutorial!! Thank you for all the tips and instructions!! Really cute designs too!! ❣🌈🌵❣

@AngieHolden

3 жыл бұрын

Thanks so much! 😊

You are a wonderful teacher, ideals are super, and your explaining is amazing. I love watching and learning from you. Thank-you so much.

@AngieHolden

3 жыл бұрын

Thank you so much!

@kimbrown1615

2 жыл бұрын

My ink run off the paper in the water? What am I doing wrong. And I seal it

Your videos are always great. Easy to relate to. Very understanding.. I really appreciate this

@AngieHolden

3 жыл бұрын

Glad you like them!

Love these, it's like you read my mind, because I was just looking into trying water slide. Also love your top.

@AngieHolden

3 жыл бұрын

Yay! Thank you!

I was struggling before your video, thank you! Great explanation 😊

Is there anything this girl can’t do? I’m obsessed with her! 😂

Very good information. Thanks.

I love your tutorial omg 😱 love it 🥰 Thank you so much 🙏🥰

@AngieHolden

2 жыл бұрын

Glad you like it!

Thank you for sharing as always, be blessed

@AngieHolden

3 жыл бұрын

You are so welcome!

Great tutorial, was wondering how to do this.. don’t know if anyone has mentioned microsol or microset it’s for waterslide decals makes the edge disappear and helps get rid of wrinkles and bubbles.

Thank you Angie! I want to try these!

@AngieHolden

3 жыл бұрын

You should!

I’ve been wondering what Waterslide Decals are. Thanks for showing us.

@AngieHolden

3 жыл бұрын

You bet!

Great video. Thanks for the great information.

@AngieHolden

Жыл бұрын

Glad it was helpful!

Very helpful, thanks so much.

@AngieHolden

2 ай бұрын

Glad it was helpful!

wow, I love this

@AngieHolden

3 жыл бұрын

Thanks for watching!

Thank you Angie!!

@AngieHolden

2 жыл бұрын

You are so welcome!

Thank you for this precise tutorial.

@AngieHolden

2 жыл бұрын

You're very welcome!

This looks so fun! I was just wondering what would be the advantage over sublimation if there is any?

@AngieHolden

3 жыл бұрын

I am working on a big comparison. It is definitely not as good as sublimation. But if you only have an inkjet printer, it is an option.

Holy hell cry-cut is badass af

I love the little cactus guy. He’s so cute. I was wondering what the poly acrylic was for until you said the ink wasn’t smeared. Would the laser version have to have poly on it as well? Thanks for all the good info Angie.

@AngieHolden

3 жыл бұрын

I don't have a package of the laser version but it will say on the back if you need to seal. Most likely yes you do.

Angie I haven’t used my cricut just a little bit intimidated , plus I’m a little busy at the moment 🙃 .

@AngieHolden

3 жыл бұрын

Try our start guide here: kzread.info/dash/bejne/maJs1s-Rld29hJs.html

Thank you for this video. Can I ask where you got the brush? Thanks

@AngieHolden

2 жыл бұрын

They were from Plaid but are several years old.

Great tutorial Do you set you cups and glasses on anything when you back them such as a cookie sheet or just put them on the wire rack in the oven?

@AngieHolden

2 жыл бұрын

I have a small craft oven but I just put them on the rack in there.

You mentioned to use the matte tape in your video. I’m having trouble with my cricut reading the lines. Would I put the tape on the lines after I’ve printed my image

@AngieHolden

2 жыл бұрын

Yes you would.

I’m going to try this now. Have you ever sealed a water slide with Mod Podge Dishwasher?

@AngieHolden

3 жыл бұрын

I have not...YET! I have some plans to test longevity!

Great tutorial! Have a question: I did a glitter tumbler and sealed with epoxy. I want to put on a water slide and then bling the slide. Is it absolutely necessary to re-epoxy? Or, can I just bling over the slide when it's dry? My concern is that another coat of epoxy will make it thick and heavier. That with the rhinestones will be bulky. Is there a work around for this process?

@AngieHolden

Жыл бұрын

I don't know of a way to seal the waterslide to make it withstand wear/washing without the epoxy.

If I am designing something myself for a coffee mug (9 oz) how do I know what to size my design to be to wrap around the mug- its a complete wrap minus space for drinking (top of mug) and space at the bottom and space from the handle on both sides. Doing mugs to match merch for my book

@AngieHolden

Жыл бұрын

I would use a sewing tape measure to measure the size.

Love your video! Question: can we use ANY mug/cup/glass for waterslides?

@AngieHolden

2 жыл бұрын

Yes you can.

I have so much trouble not tearing mine. Do you think it’s because I didn’t put enough sealer on them or give it enough time to dry? I order the laser ones since it didn’t require the sealer but don’t want to waste anymore paper.

@AngieHolden

3 жыл бұрын

Maybe not enough dry time? I didn't use any other brands but I am wondering if there is a difference there.

With that rainbow, could you put the white square behind it and slice? Then remove the outside of the square and flatten the inside? Would that work, or am I missing something? May I’m missing attach? Lol

@AngieHolden

3 жыл бұрын

Oh yes! That would work! I didn't even think about that!

Could you do this with a stemmed wine glass? Also love your vids! You rock!

@AngieHolden

3 жыл бұрын

Yep it would work on those.

When do you use the spray sealer I saw on your links for this video? You didn't show using that product. Love your videos!

@AngieHolden

10 ай бұрын

Try 5:26 in this video.

hi there! is there a specific file that we can use for waterslide decal? png or svg? Thanks for sharing this video

@AngieHolden

2 жыл бұрын

PNG or JPG would be better but you can flatten an SVG and print it as well.

So I've read different answers on the internet about the ink that needs to be used. So would I need a whole different printer with a different ink or can you use the ink in your ink jet printer and I also read that on the items that come in with food contact that they just need to be sealed with a food safe seal.

@AngieHolden

Жыл бұрын

Water slides work with regular ink. I would use a food safe sealer.

Did not find the settings I was looking for, what kind of medium people select for waterslide decals because it's still not in Cricut / Design space :\

@AngieHolden

3 жыл бұрын

Try printable vinyl.

Good Morning, I have a question concerning waterslide decals and sealing on a tumbler. I have a laser printer, laser waterslide decal paper, and ordered some white tumblers that are also sublimation tumblers (just happened to work out that way). I was wondering if I could oven cure these and do I need a completely separate oven to cure than my home oven? Is it the sublimation mug that gives off fumes or the actual sublimation print out (which I am not using). I know most people use epoxy but I'm not sure I want to go down that avenue just yet. I love watching your channel and is most definitely one of my "go to" for information and education.

@AngieHolden

7 ай бұрын

Epoxy is the best sealing method. It is the sublimation process that gives off fumes. So the ink becoming a gas then fusing with the coating.

what a great guide! I wonder if I could print decals with a HP 4620? Like, how do I know which printer is capable of printing such photos? thanks!

@AngieHolden

2 жыл бұрын

You can use any inkjet printer with these.

@heeku_

2 жыл бұрын

@@AngieHolden So as far as you know, 4620 by hp will do fine printing color images on those special printing papers?

@AngieHolden

2 жыл бұрын

It should be fine.

@heeku_

2 жыл бұрын

@@AngieHolden I appreciate it a lot, will order the papers and use your guide :P

Where can you buy premade water slide decals to trim things like picture frames and mirrors?

@AngieHolden

2 жыл бұрын

Not sure. Sorry.

Hi, I’m new to this type of crafting and had a question. I don’t have a craft oven, and I read that it’s not safe to bake these items in an oven that will be used for food. Would I be ok not to bake it, but to use the dishwasher safe mod podge on top instead?

@AngieHolden

2 жыл бұрын

You can let waterslides air dry for like 3 days and they are fine.

@Lafemme415

2 жыл бұрын

@@AngieHolden thank you! And thank you for the detailed video!

If I make the same decal like 12 on a sheet do I need to put box around each sticker or will duplicate do that automatically???thank you

@AngieHolden

Жыл бұрын

You only need a box around them all and Cricut takes care of that for you.

great tutorial, can these decals be used in journals?

@AngieHolden

2 жыл бұрын

I have never used them on paper. You would need to get that paper wet.

How secure are these. For example, could you scrape that off with your fingernail if you really tried to, or is pretty solid?

@AngieHolden

2 жыл бұрын

Try this: kzread.info/dash/bejne/nWxs1baOhN2smKg.html

What printer do you use? Do you ever experience any white lines or low quality prints?

@AngieHolden

3 жыл бұрын

Try this video: kzread.info/dash/bejne/ZYBnptBuos63aaQ.html

This remind of the temporary tattoos we had as kids! I wonder if they're the same exact thing?

@AngieHolden

3 жыл бұрын

Pretty darn close! HA!

I’ve got a dumb question I’ve watched all these tutorials and it says if you bake in your oven with a craft such as this one you can never use your oven again is that true because if so what is the different alternative alternative

@AngieHolden

2 жыл бұрын

I have a dedicated convection oven in my craft room for projects. Just a small one that you can get fairly cheap on Amazon.

Most people say to bake at 230 for 10-15 mins. Does it matter that I have a gas oven? I know i have to adjust when cooking so im afraid it might crack. Doing a photo on to a plate

@AngieHolden

2 жыл бұрын

I would follow the instructions on the water slide paper that you purchase. I am not sure about the gas oven though.

Hi! Are you using regular printer ink to create your decals or speciality ink ?

@AngieHolden

2 жыл бұрын

Regular printer ink.

Do you put the paper in face down? I have the same printer that you have.

@AngieHolden

3 жыл бұрын

The HP Printer you put the paper in face down.

How long after can they be washed, used, etc? Thanks

@AngieHolden

3 жыл бұрын

Try this: kzread.info/dash/bejne/nWxs1baOhN2smKg.html

Are the mugs a Sublimation mug or just a reg mug you can get at Dollar store or Walmart

@AngieHolden

2 жыл бұрын

Water slide can be used on any mug.

Are you saying to bake it just like in a regular oven or something special?

@AngieHolden

3 жыл бұрын

You can bake it in a regular oven. I have a small convection oven in my craft room I use for crafting.

hi. how can i get it off the glass. i baked at 250 for 7 mins. but it cracked effect. i am trying vinegar to try to take off . any tips ? thank you. :)

@AngieHolden

Жыл бұрын

Can you just soak in water?

Is the clear gaze spray a sealer I can use?

@AngieHolden

2 жыл бұрын

I used an acrylic sealer.

The cactus looks the same from the other side because it s transparent, if you printed on the white paper would you get the same image looking at the glass from the back?

@AngieHolden

7 ай бұрын

No it would look white from the back.

Super cool video. I have a problem with my waterslide decals: they come off really easily after a couple of hours from laying down. Is it normal?

@AngieHolden

2 ай бұрын

They stick pretty well I find until you get them wet again.

@dimebag108

2 ай бұрын

@@AngieHolden with well you mean they can be pulled off with a nail from the edge? Because that's what happens to mine (Hayes clear inkjet)

I’m curious about the spray sealer, it’s not food grade so if the cup was gifted, they would be putting their mouth on it to drink from

@AngieHolden

2 жыл бұрын

You have to keep it away from the top so your lips won't touch it.

You can also put water slide decals on wood.

@AngieHolden

3 жыл бұрын

I think it should work. You would probably not bake it though. Just let it air dry.

I sprayed my waterslide decal outside with polycrylic and it bubbled! It’s in the 50’s today…I don’t know if that caused the bubbles or what happened! Any clue? Thank you! I just love your tutorials!❤

@AngieHolden

Жыл бұрын

I have not had that issue at all. Did you shake the polycrylic well?

Can you put these on wood without having to bake it?

@AngieHolden

3 жыл бұрын

There are instructions for wood and you just let them sit longer to dry out. The baking is just to dry it out and remove the moisture.

You mentioned its not dishwasher safe.what about handwashed? i tried this exactly the way you did. but when i washed it it just fell.what did i do wrong?

@AngieHolden

3 жыл бұрын

I have several of these sitting in my craft room to try some dishwasher tests on right now. I am waiting for a sealer to cure over the top. Did you wait the amount of time and bake yours? There should be times on your package and then it should have been hand wash safe. I am not sure if you could soak it in water or anything but you should be able to rinse it off without anything over the top.

@dreamsg7ailed

3 жыл бұрын

@@AngieHolden yes i have the same brand paper you showed. the first time i did mess up. so the second time i made sure i did exactly what the instruccions said. does it depend on the mug? maybe its finish. i tried one from dollar tree and another from ross.

Hi, I can place in a regular home oven to cure the glass?

@AngieHolden

2 жыл бұрын

I think it is fine with waterslide but I use a small table top oven in my craft room.

@gg01lady

2 жыл бұрын

Thank you

My Circuit will not cut my water slides out. Any suggestions why it’s doing that?

@AngieHolden

2 жыл бұрын

My guess would be the glossy surface. Spray with a matte sealer when you are sealing instead of a glossy one. Or cover the black lines with matte tape.

Can you bake in Cricut mug press

@AngieHolden

3 жыл бұрын

No.

Can the mug be washed in hands,will it be affected after washing

@AngieHolden

2 жыл бұрын

Try this: kzread.info/dash/bejne/nWxs1baOhN2smKg.html

im rather confused, with laserjet water slide decals you dont need to seal them post print or am i missign somthing?

@AngieHolden

2 жыл бұрын

I have never used the laserjet version.

@peng9179

2 жыл бұрын

@@AngieHolden my mistake and thank you for your consice video

I have an Explore Air 2 and I get an error message when I try to cut Waterslide decals. You mentioned to use mat tape. Where exactly am I supposed to put the tape?

@AngieHolden

2 жыл бұрын

Just regular scotch tape with a matte finish.

@tcliftonjm

2 жыл бұрын

Where do I apply the tape? What are registration marks? I’ m a beginner and I have a lot to learn.

@AngieHolden

2 жыл бұрын

The registration marks are the black box around the outside when you print from Cricut Design Space.

what program and printer are you using?

@AngieHolden

2 жыл бұрын

I am using Cricut Design Space and an HP Photo Envy.

I am also concern if it is not food safety, then when we put in oven to bake it, is it safe?

@AngieHolden

3 жыл бұрын

It does not release chemicals. You can let it air dry.

@ruthhan01

3 жыл бұрын

@@AngieHolden Thanks... Now I feel safer... will try it out today

I’m not sure I understand what you used the Cricut for. I guess I need a tutorial for the whole process. Like starting with the image you used were you cutting the image out on water slide paper. I just simply don’t understand what your doing. Can anyone explain.

@AngieHolden

11 ай бұрын

I printed the image on a printer then cut around it with a Cricut. You can use scissors but the Cricut is more precise.

Hi everyone, can I get some help? :/ I am having massive printing issues. My printer leaves scratch marks all the time and sometimes the print is totally unusable. My printer back feed uses wheels that make contact with the ink on the paper and leave marks, and my front feed keeps bumping into curved or elevated surfaces on the paper, scratching the ink. Does anyone know how this can be solved? Many thanks in advance :)

@AngieHolden

2 жыл бұрын

I am not sure how to help with that. Sorry.

@LinzLovesBingo

2 жыл бұрын

I’ve had this issue an have to clean that roller often. Just use a dry cloth and rub the ink off of it.

My image is printing the wrong color. I don't know what to do. Can you help me?

@AngieHolden

2 жыл бұрын

Sorry not sure why it would do that on these decals. Maybe something wrong with your printer.

How heavy do you spray.

@AngieHolden

3 жыл бұрын

I did three light coats.

How safe the baking process? I am a chicken with oven and glass

@AngieHolden

2 жыл бұрын

This product is a really low temperature so I don't think there is any risk.

So they're kind of like temporary tattoos. Can these be applied to plastic? Like Lego men?

@AngieHolden

Жыл бұрын

Not sure!

Instead of baking could you put them in a mug press?

@AngieHolden

3 жыл бұрын

I don't think so. The baking is at a low heat and basically dries them out.

@dreayazshow5968

2 жыл бұрын

Baking as in the oven in the kitchen?

would you put the glass in the oven as well to seal it?

@AngieHolden

Жыл бұрын

You can bake these or allow them to dry. It doesn't really seal them from water, however.

@filigroove

Жыл бұрын

@@AngieHolden so how can they wash the glasses. I want to do these on wine glasses but don't want them to wash off when they wash their glasses. Is there a film or something to put over them other than modge podge?

@AngieHolden

Жыл бұрын

I haven't had good luck with these frankly. They don't last very long.

Can you use a regular oven??

@AngieHolden

2 жыл бұрын

I don't know that water slide puts out any fumes? I just always use my craft oven.

I bought printable waterslide decal paper, printed on it then tried to put it in my cricut and the cricut nearly exploded (not really) trying to find the registration marks and refused to cut it and it threw off all the cuts of other projects.

@AngieHolden

2 жыл бұрын

That is because it is glossy. When you do the sealer, you can use a matte sealer and that usually fixes it. Or you can put matte tape over the black lines.

@vampiregoat69

2 жыл бұрын

@@AngieHolden this is without any sealer on it I have to draw over the lines with a black sharpie just to get it to read

@AngieHolden

2 жыл бұрын

Correct. Because the paper is glossy. I would put the sealer on first so it is not shiny or go over the top with matte tape. The sensor is getting a reflection from the glossy surface and it can't see your lines.

Can you wash the mugs?

@AngieHolden

11 ай бұрын

This product does not last very long in my experience.

Wow so it takes like 2hrs to make a mug?

Do you print and finish ready to use decals?

@AngieHolden

2 жыл бұрын

No I don't sell any printed.

Could you put these on candles?

@AngieHolden

3 жыл бұрын

Oh I bet so! That is a great idea!

@AngieHolden

3 жыл бұрын

I wouldn't bake the candles though! Just let them air dry!

@ameliaunicornkitten3162

3 жыл бұрын

Hoping to make a first holy communion candle for my daughter 🤞🏻 thanks for the reply great video!

Can we use waterslide paper for creating temporary tattoos?

@AngieHolden

Жыл бұрын

They make temporary tattoo paper that would work way better.

When I placed them.on the mug it came out in one hand wash. I did everything but still did not work. What am I doing wrong

@AngieHolden

3 жыл бұрын

Oh no! Did you bake them or no? How long did you wait before washing?

@MV-ws5yh

3 жыл бұрын

@@AngieHolden I baked waited 2 days before washing

@AngieHolden

3 жыл бұрын

Well that is a total bummer! I have some I sealed but I need like 10 more days then I can test them and see if they work better. Video coming soon.

@MV-ws5yh

3 жыл бұрын

@@AngieHolden should I do an epoxy after if so do u hv video

@AngieHolden

3 жыл бұрын

You can do epoxy! Try this video: kzread.info/dash/bejne/nqtrxZNqXbLYosY.html

Howvto use cricut joy to cut

@AngieHolden

6 ай бұрын

You would follow the same instructions.

Could we use offset

@AngieHolden

2 жыл бұрын

Sure!

I have a bracelet watch that goes with mix and mingle...I need help figuring out what I need to fix it or ideas. It's for my mother please contact me somehow I can send pics please🙏💕

@AngieHolden

3 жыл бұрын

I am pretty sure the mix and mingle line was discontinued. Maybe try ebay?

@Tacoshell420

3 жыл бұрын

Thank you for reading 💖It doesn't have to be that brand necessarily I would like to put the watch piece on a new chain and I need help on how to go about doing so I have some match and mingle beads that decorate the chain

can you download images from my computer.

@AngieHolden

4 ай бұрын

No I cannot access your computer.

Why can’t you use your oven after doing a water slide decal??

@AngieHolden

Жыл бұрын

You can. I have a small oven for my craft room however.

😢 the edges always curl up when I do the waterslide

@AngieHolden

2 жыл бұрын

I find that different brands of paper give me different results. You might try another brand and see if it works better for you!

@catwomanvl05

2 жыл бұрын

@@AngieHolden thanks.

I, personally, am not fan of youtube tutorials over written ones the I can read as I learn; so if there is a page with the tutorial on it, send it to me. Thank you

@AngieHolden

2 жыл бұрын

All of my videos get turned into blog posts on The Country Chic Cottage. You can head there and search for any of these.

How long do it last

@AngieHolden

3 жыл бұрын

Try this: kzread.info/dash/bejne/nWxs1baOhN2smKg.html