WATERCROSS BUDGET BUILDS

Professional Watercross racer of IWA, Grant Whitaker #777 from team Shitti Skippers explains the fundamentals of building a watercress sled on a budget.
We have a lot of fun talking about watercross and would love to grow the sport.
If you have any questions feel free to reach out
Instagram: mr.snowmax...
Facebook: search/top/?...
OR here on KZread!
Here are a few quick buys to start out your watercross build!
Rope: amzn.to/3EYbrDz
Light: amzn.to/3shNZty
Buoy: amzn.to/3eSL2wm
Leaf Blower: amzn.to/3segrMP
Gas Tank: wahlracing.com/product/plasti...
Tank Fitting: wahlracing.com/product/fuel-t...
Tank Cap: wahlracing.com/product/cap-ve...

Пікірлер: 24

  • @symmetricaldesign
    @symmetricaldesign Жыл бұрын

    look at these sick edits

  • @tylerseabook9423
    @tylerseabook9423 Жыл бұрын

    I made one out of a 98 summit 670. Narrowed. Locked the rear suspension and it works beautifully 😊

  • @SnowmaxPerformance

    @SnowmaxPerformance

    Жыл бұрын

    Glad you have a dialed unit! You been out yet this year?

  • @3rd4thgenFbody
    @3rd4thgenFbody Жыл бұрын

    Been looking into building a water sled and the what to do

  • @strattonmckinley3514
    @strattonmckinley3514 Жыл бұрын

    Stock motors for the win! Just need some throttle and rider talent lol

  • @sargeatlarge24v
    @sargeatlarge24v Жыл бұрын

    I’m waterproofing my pro x right now! Any ideas on where I can get an already shortened front end for it? 03 pro x 700

  • @SnowmaxPerformance

    @SnowmaxPerformance

    Жыл бұрын

    Unfortunately for that you will have to make the arms yourself

  • @jayv17
    @jayv175 ай бұрын

    Running a ‘96 Formula Z 583. Goes great but seems to overheat. Do you do anything to cool the sleds? Reg coolant? I have Evan’s waterless coolant but haven’t put it in yet.

  • @SnowmaxPerformance

    @SnowmaxPerformance

    5 ай бұрын

    i would make sure your water pump / thermostat is working good, we only cool the sleds down on shore with ice and blowers.

  • @jayv17

    @jayv17

    5 ай бұрын

    @@SnowmaxPerformance will do. Do you think I could run without the thermostat or is restriction necessary to keep coolant from heating up too much? Going to add a temp gauge. Sled was smoking like crazy after about two minutes of running and 3 short runs about 100 yds. Thought it was smoked but compression is fine and seems to run ok. Hitting the water again soon down here in FL😁

  • @SnowmaxPerformance

    @SnowmaxPerformance

    5 ай бұрын

    @@jayv17 that’s overheating to fast, I would run the thermostat. Something fishy is going on.

  • @moonlitecustomfab706
    @moonlitecustomfab706 Жыл бұрын

    ♥ ♥

  • @drewjolly231
    @drewjolly231 Жыл бұрын

    Couple good units

  • @robbycarpenter1475
    @robbycarpenter14759 ай бұрын

    When he said anything below 600 your gonna run out of power. Yeah I’m dedicated now🤣💀

  • @SnowmaxPerformance

    @SnowmaxPerformance

    9 ай бұрын

    We have tried some fan cooled sleds with no luck haha

  • @rjbielejeski3908
    @rjbielejeski3908 Жыл бұрын

    Did you just cut every down a few inches in the front end to suck it in?

  • @SnowmaxPerformance

    @SnowmaxPerformance

    Жыл бұрын

    No this one I just changed the shocks, the track I hand cut the lugs

  • @qweqasdxcz
    @qweqasdxcz10 ай бұрын

    You said for the good rake you sucked the skid all the way up in there. What do you mean by that?

  • @SnowmaxPerformance

    @SnowmaxPerformance

    10 ай бұрын

    Changing the mounting to different holes

  • @joelcroteau-vq5lb
    @joelcroteau-vq5lb10 ай бұрын

    How much did you cut off the tire rods for these builds ??

  • @SnowmaxPerformance

    @SnowmaxPerformance

    10 ай бұрын

    I didn’t cut them

  • @joelcroteau-vq5lb

    @joelcroteau-vq5lb

    10 ай бұрын

    You just slammed the shocks that’s it for the front end? And then stiffer front shock spring ? With loose limiter straps ?

  • @SnowmaxPerformance

    @SnowmaxPerformance

    10 ай бұрын

    @@joelcroteau-vq5lb yup had no idea what I was doing, when I first built it but it worked haha. 89 jag shocks in the front, made my own limiter strap, and 280 lb front spring in the skid shock

  • @matthewnelson4209
    @matthewnelson4209 Жыл бұрын

    Greasy units