It’s great there is folk like you on the internet good enough to do helpful videos like this. Well done my man 👍🏼

@aaanton11

2 жыл бұрын

Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

So very good like all your videos 👍 I bought an aygo, knowing theyre pretty easy to fix by oneself. Just... nice to know, i thaught. Then i found your channel, and now i changed three weel bearings, understood that the ignition coils was the problem (and so ridiculously easy to replace!) and soon my water pump is new as well 😊 well done for someone just filling up oil and change tyres before! And so much money i saved 😱 Thanks mate 😎👍

@aaanton11

2 жыл бұрын

Glad you like them! Thanks for the great comments👍🏻👍🏻🛠

Just changed the water pump, with your video….spot on..thank you

@aaanton11

Жыл бұрын

well done, Thanks for the great comments👍🏻👍🏻🛠

My water pump on the Toyota Aygo is been rattling for a month now at 66450 Km done on car. With this clear video am going to change it myself....Thanks a lot Aaanton...

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

@kennedygwanama3047

3 жыл бұрын

@@aaanton11 I successfully changed it myself today and all is well. Thanks for the encouragement. The only difference was on work preparation. It is actually much easier and faster when one removes the front bumper than getting it under the wheel. That how I approached it.....I learned the trick from another fellow....

@lajosbakk3317

Ай бұрын

My Aygo just started to do it and on clock is 112.000 miles :)

Learning, learning, learning (and doing if necessary). I just checked the tension of my C1's belt. Everything allright! Thank you aaanton! 🚗😃🚗

@aaanton11

3 жыл бұрын

Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

Thanks for the excellent and detailed video and explanation, I'll be tackling my water pump tomorrow.

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I just wanted to say Ant, that your videos have been helping me for a while. Thanks for another good video mate. You’ve basically done your own Haynes video manual for the Aygo, Ant style 😎. 💪🏽

@aaanton11

7 ай бұрын

Much appreciated Thanks for the great comments👍🏻👍🏻🛠

Spot on. Parts ordered, and ready to fit pump on my C1. Citroen wanted 250 all in for the job. Very pleased KZread exists!! Nice one.

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@stylianosdeligiannis6662

4 жыл бұрын

Hi, really good job! Your great video helping us a lot! Do you have any available for timing chain replace? Is possible DIY job? Thank you

Thanks for another fantastic tutorial with all the details! :)

@aaanton11

4 жыл бұрын

Thanks for the great comments 👍🏻👍🏻🛠

Perfect, detailed & very clear description !!! Thanks !

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thanks, that's the perfect video, every other water pump video has been 2 mins of bloody pictures! Our 2008 c1 57k has a noisey water pump with some corrosion and coolant residue around the pump, i'll get stuck in over the weekend once the no aircon belt arrives.

@aaanton11

4 жыл бұрын

Great stuff, thanks for the great comments 👍🏻👍🏻🛠

Brilliant , the Mrs has an Aygo so if it ever needs a pump I'm all primed to go , cheers buddy 😁👍👍

@aaanton11

4 жыл бұрын

Thanks for the great comments 👍🏻🛠

Good video as always. Did mine at about 60k, current one is still going fine 95k later. Think you will have to do another video soon. Those front disks look about ready for a change! 👍

@aaanton11

4 жыл бұрын

🛠thanks gav, yes Pads and Discs in another 6000 miles👍🏻👍🏻🛠

thanks for the detailed video i changed my water pump as mine was whining after watching this video thanks aaanton

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Many thanks for your great videos and efforts spend. For this fun part here removing the front bumper (few bolts and two clips on both sites) gave me easier access to the rip belt area. Greetings :-)

@aaanton11

4 жыл бұрын

thanks Gerhard for the great comments 👍🏻👍🏻🛠

This is the fifth time I have watched and used the info in your videos! Managed to fix my wife's car a few times now! Cheers :P

@aaanton11

3 жыл бұрын

Great to hear! Thanks for the great comments👍🏻👍🏻🛠

Спасибо за показ замены помпы.

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

thanks mate, fixed my yaris sr water pump today with help from your video!

@aaanton11

3 жыл бұрын

Glad it helped Thanks for the great comments👍🏻👍🏻🛠

Thanks for your help great video! Hopefully going to swap this next week!

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

What a helpful video.Got my 60 plate 107 3 weeks ago and i could hear some noise coming from the engine bay but wasnt sure where the noise was coming from exactly.Today i took the front bumper off to get to the auxillary belt as i was gonna take it off to check what was sounding rough.I noticed a puddle under the car and this confirmed that the water pump was the faulty part.I got the new pump and belt and getting it fixed first thing in the morning.Brilliant step by step video.I feel i could do this myself but cars already booked in at the garage now.

@aaanton11

Жыл бұрын

You will be fine, if you can take the bumper off you can change a water pump, Thanks for the great comments👍🏻👍🏻🛠

Thank you for this video, it allowed me to change the water pump on my Little Bugger 😂 Brilliant work!!

@aaanton11

Жыл бұрын

Well Done, Thanks for the great comments👍🏻👍🏻🛠

Nice video, congratulations ! 👍👍👍

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Great video, thanks for sharing!

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Perfect instruction videoclip!Professional! Thank You soo much!

@aaanton11

3 жыл бұрын

Glad it was helpful!, Thanks for the great comments👍🏻👍🏻🛠

perfect video in 2024 :) like always...

@aaanton11

Ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

thanks mate for making the video, well done.

@aaanton11

3 жыл бұрын

Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

Beautiful, thanks from Sweden..!

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thanks mate this helped a lot, made it really easy. Replaced mine at work after the pump seizing the day before and melting the belt. thankfully seems that the previous owner misplaced the wheel arch lining so made the job even quicker 😅

@aaanton11

4 ай бұрын

Nice work! Thanks for the great comments👍🏻👍🏻🛠

Good informative video,thanks.Just that pecky plastic wheel arch cover that adds time to the job.Been watching a few videos and great job!

@aaanton11

4 жыл бұрын

Glad you like the channel, Thanks for the great comments👍🏻👍🏻🛠

@crpth1

3 жыл бұрын

The "pesky plastic" had years of service to parts that otherwise become completely exposed! Every single car, where some "clever" mind decided to remove what the factory put in there. As dire consequences easily seen over the years... Be wise and always keep the protections in place! There's good reasons why factories, that are always counting pennies, decide to spend money on those... Just some food for taught! ;-)

Ja to zmieniłem normalnie na parkingu w pół godzinki 😎 od góry bez rozkręcania połowy auta. swoją droga te trojaczki aygo c1 i 107 są mega mega proste

@aaanton11

2 жыл бұрын

Well done Thanks for the great information👍🏻👍🏻🛠

men o men this helped me so much! thank you!!!!!!

@aaanton11

4 жыл бұрын

Thanks for the great comments 👍🏻👍🏻🛠

These little cars are a dream to work on, BMW and mercs could learn a lot from Toyota👍 great video... Looks like it needs an oil change from the state of the oil filter 😂😂

@aaanton11

11 ай бұрын

😂 Thats in another video, Thanks for the great comments👍🏻👍🏻🛠

Great work 👍🏻

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@n4rek840

4 жыл бұрын

aaanton11 you are welcome, I had the same problem on my Toyota Aygo

Nice job, the only thing that crossed mind was length of the new bolts. I know they were longer to accommodate the deeper casting but I think I would have checked that their projection amounted to the same as the original bolts in case they bottomed out in the tapped holes ( you might have already done that off camera). Not sure if the water pump was genuine Toyota but been caught out so many times with patent parts.

@aaanton11

Жыл бұрын

Great point! Yes make sure the bolts fit, Thanks for the great comments👍🏻👍🏻🛠

well done thank you

@aaanton11

9 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

was a great help...tnx !!!!!

@aaanton11

3 жыл бұрын

You're welcome!, Thanks for the great comments👍🏻👍🏻🛠

Thx for this good Video!! 🙂👍🏼

@aaanton11

10 ай бұрын

Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

Most complicated multi task repair 🤪. I love you anyway.

@aaanton11

3 жыл бұрын

Thanks Valentyn, appreciate your support, Thanks for the great comments👍🏻👍🏻🛠

Nice Rims!

@aaanton11

2 жыл бұрын

This video is all about them, kzread.info/dash/bejne/e56Yp8quj5XQY9o.html

Grazie mille, fratello. Possiedo una Dahiatsu Sirion che monta lo stesso motore Toyota 1KR-FE. Acquisterò pompa e cinghia e lo monterò sotto casa assieme a te. Grazie ancora!

@aaanton11

10 ай бұрын

Yes they are very similar, Thanks for the great comments👍🏻👍🏻🛠

GREAT VID SIR! I have watched it on phone, but if I had headphones, I would probobly loose my ears on sound of water pump at first half minute of the video :-D

@aaanton11

2 жыл бұрын

Glad you enjoyed 😂 Thanks for the great comments👍🏻👍🏻🛠

Great video mate. but you are really taking a risk with no jack stands. I would hate to see a good mechanic get injured. Keep up the great work though. Subscribed.

@aaanton11

4 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

brilliant mate

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I did it, thanks to you.

@aaanton11

7 ай бұрын

well done, Thanks for the great comments👍🏻👍🏻🛠

Hi, Great and useful videos!!! Can I ask a question? Do you ever need to change or stop up the gear box oil on a citroen c1? Thanks 👍🏻

@aaanton11

3 жыл бұрын

The gearbox is filled for life, but if you have a leak, or the gearbox is removed it is worth changing or checking it, Thanks Lee for the great comments👍🏻👍🏻🛠

Good job there ;) we can notice at 26:55 the engine moving a bit is this normal movement or an indication of bad motor mounts? if so, very looking forward to their replacement :)

@aaanton11

4 жыл бұрын

Normal movement on the engine, I am sure I can find a few More jobs to do lol, thanks for the great comments 👍🏻👍🏻🛠

@simonpro267

4 жыл бұрын

That's completely normal, it's a 3 cylinder so that's why it makes such movements, if your engine would make movements the same as when you start it at 26:55 everytime then that would mean your engine's supports are going to die or are already dead

Hi, I really enjoy your videos. They are really helpful. Can you please do a video on how to remove completely the tail boot door from the Peoguet 107/Citroen C1/Toyota Aygo, please? I searched everywhere on the internet and cannot find a thing. That would be really helpful. Thanks in advance.

@aaanton11

2 жыл бұрын

I will add it to the list, Thanks for the great comments👍🏻👍🏻🛠

@joaquinpv7904

Жыл бұрын

@@aaanton11 did you?? I'm specting it as well

Brilliant 😁I got a C1 so this may come in handy. Is the noise from the water pump caused by worn bearings?

@aaanton11

4 жыл бұрын

Yes, everything was fine after repair, thanks for the great comments 👍🏻👍🏻🛠

Bloody brilliant thankyou 👍. Still looks bloody awkward though.

@aaanton11

3 жыл бұрын

It’s not a bad job, Thanks for the great comments👍🏻👍🏻🛠

Thank you so much for this video, very helpful. I managed to do this without jacking up the car or taking the wheel off. It's a bit of a tight space, but if you have skinny arms, it can be done 😂 I don't suppose you know what the oem water pump is for a 07 plate? Tried looking online but no luck. Just trying to find out if my pump was ever changed.

@aaanton11

5 ай бұрын

Great job! Thanks for the great comments👍🏻👍🏻🛠

Thank you

@aaanton11

2 жыл бұрын

You're welcome Thanks for the great comments👍🏻👍🏻🛠

good video

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Thank's for that video. I have a qustion: Do you have to vent the 107 coolant circuit? When yes, where exactly?

@aaanton11

3 жыл бұрын

No need, just fill it up and run with the cap off for a bit, Thanks for the great comments👍🏻👍🏻🛠

Silly question, but have you ever damaged your watch by wearing it during car repairs? I've chipped the glass on mine and broken off one of those spring-pins that hold on the strap and learnt the hard way to take it off first. Fix one thing and break another!

@aaanton11

4 жыл бұрын

I have slightly scratched the screen once, but no permanent damage from using the watch while working. I love this Casio G shock titanium watch I have had it now for nearly 10 years. Thanks for the great comments 👍🏻👍🏻🛠

Hey! Amazon tutorial! Can’t wait to make a start myself. I want to ask would this be same for an Aygo diesel 1.4 2007? Also what do you call that power tool you are using to take bolts off?! Thanks !

@aaanton11

Жыл бұрын

1.4 diesel is different, amzn.to/3qaGVxq this is the tool, Thanks for the great comments👍🏻👍🏻🛠

Would you consider doing a video on rust prevention, prime spots etc.?

@aaanton11

2 жыл бұрын

Yes I will add it to the list, great suggestion, Thanks for the great comments👍🏻👍🏻🛠

thank you great

@aaanton11

4 жыл бұрын

Thanks for the great comments 👍🏻👍🏻🛠

Thanks Anton, i noticed you didnt put any sealant to seal the new water pump, just new gasket rubber and then the bolts. Is it ok without the sealant? thanks

@aaanton11

Жыл бұрын

Yes Wont need sealer Thanks for the great comments👍🏻👍🏻🛠

Great video. Use jack stands ! What god is a new water pump if the car kills you. By the way, you could add Yaris to the title mine has the same 1KR-FE engine.

@aaanton11

3 жыл бұрын

I have a jack with a safety lock, so no need for stands, if I am lying under the car I will always use a stand too, Thanks for the great comments👍🏻👍🏻🛠

I saw at 1:26 you jacking the car up in a different place other than the sills, where did you jack it up from, my sills are corroded and im frightened that they will break and the jack will end up inside the car? Cheers

@aaanton11

3 жыл бұрын

The best place to jack is under the front subframe, the thick metal frame, Thanks for the great comments👍🏻👍🏻🛠

Recently had water pump changed at a local garage. 2 weeks later the battery wouldn't charge, temperature becoming an issue. I assume it's the belt that's gone and needs doing but shouldn't they have spotted that?

@aaanton11

3 жыл бұрын

The belt might have been too tight, Thanks for the great comments👍🏻👍🏻🛠

Hey Anton at what temp do fan kick in/starts after u has refill anti freeze. I have an Peugeot 107, shall replace water pump for first time in my life. And change thermostats.

@aaanton11

3 ай бұрын

Fan starts somewhere around 90 degrees, the water pump is a nice job, Thanks for the great comments👍🏻👍🏻🛠

Not seeing any axle stands there matey. Living dangerously. Be careful.

@aaanton11

4 жыл бұрын

I always use the safety catch on the jack, or a stand, thanks for looking out for me 👍🏻👍🏻🛠

@PeterSmith-ls7ut

3 жыл бұрын

@@aaanton11 ?

@crpth1

3 жыл бұрын

@@PeterSmith-ls7ut - See 1:35... ;-)

I have a question, I have a peugeot 107 I have been getting a slight squeel when taking off in 1st gear and changing to 2nd, and hill starts when I have to give it more revs. I changed the alternator belt and it seemed to squeel less at first but now it's getting worse again. This only seems to happen if I drive it hard. Could it be the clutch bearing? This doesn't happen in all gears. Thanks for your help

@aaanton11

3 жыл бұрын

Unlikely to be the clutch bearing, might be the exhaust Flexi joint squeaking, Thanks for the great comments👍🏻👍🏻🛠

@paulsha9582

3 жыл бұрын

@@aaanton11 thanks for your reply. I did an experiment and noticed it only does the squeel when rpm is above 2k. If I rev above 2k in neutral and let clutch out it doesn't do it.

THANKS

@aaanton11

3 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Could you do a video on where to jack it up and or place axle stands Ant?

@aaanton11

3 жыл бұрын

Yes I showed this in the lowering spring video,kzread.info/dash/bejne/eXWnuddrhs_Ilpc.html Thanks for the great comments👍🏻👍🏻🛠

@curtis8516

3 жыл бұрын

@@aaanton11 where at the front, you only showed the back :)

Hi, I think my water pump needs replacing cos it's making a noise that area its not squealing(fan belt), so do you think it needs replacing

@aaanton11

3 жыл бұрын

More than likely Thanks for the great comments👍🏻👍🏻🛠

The old waterpumps actually were part of a recall, exactly because of that reason. The pressed plate housing warps. Surprised it held this long. Oh, and by the way, the block actually has a coolant drain, just right beside the pump.

@aaanton11

4 жыл бұрын

Thanks Paul for the great information👍🏻👍🏻🛠

@marcothalow

4 жыл бұрын

Do you know when they changed to the newer waterpumps?

@JoaKimzen

2 жыл бұрын

Do you know if the 2010 cars also came with these waterpumps?

@Paul_VanGo

2 жыл бұрын

It's easy to recognise; the new one is cast alloy. I can't remember when they OEM changed them.

Can I ask please - Is it normal for the alternator not to turn by hand? I'm not sure whether it's my water pump or alternator that's the problem. Any help would be great thanks

@aaanton11

9 ай бұрын

Alternator is shot should spin freely Thanks for the great comments👍🏻👍🏻🛠

Nice❤

@aaanton11

3 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

Hi, Great and useful videos, can you please show how to fix cod p0443 Peugeot 107. Thanks

@aaanton11

3 жыл бұрын

I will put it on the list, a common issue is the filler cap not sealing correctly, this can cause an issue, Thanks for the great comments👍🏻👍🏻🛠

Anyone know if you can get replacement AC pulleys? I had a spare water pump so fitted, as per this great video (the Aygo has a few different square wheel liner clips that are bloody fiddly to remove) but I still have an odd noise and on further inspection the noise appears to be coming from the AC pulley area. So far I can only find replacement AC pumps which cost £300 odd and I'd also need to get the AC gas removed and refilled. Anyone pulled the AC pulley off and fit a new bearing or is that not possible? Seems you can on some makes but I've not found details for C1/107/Aygo. Cheers 🍻

@aaanton11

4 жыл бұрын

I have only replaced the complete compressor, not the outer bearing and pulley on this model, sorry, Thanks for the great comments👍🏻👍🏻🛠

@FrazeBigs

4 жыл бұрын

@@aaanton11 thanks for the speedy reply. As a short term solution, is it possible to fit a non AC aux belt and thereby bypass the AC pump?

@aaanton11

4 жыл бұрын

You will need to remove the ac compressor then fit the shorter belt Thanks for the great comments👍🏻👍🏻🛠

Cool 107! What brand wheels are those if I may ask? :)

@aaanton11

4 жыл бұрын

I have a video on them, kzread.info/dash/bejne/e56Yp8quj5XQY9o.html , enjoy, Thanks for the great comments👍🏻👍🏻🛠

Just got this problem today…..will let you know how I get on

@aaanton11

Жыл бұрын

Ok, Good Luck, Thanks for the great comments👍🏻👍🏻🛠

Is it a routine part of the process to change the drive belt when replacing the pump?

@aaanton11

Жыл бұрын

only if it is worn, Thanks for the great comments👍🏻👍🏻🛠

@underdogunchained

Жыл бұрын

@@aaanton11 Changed the water pump today. It was a git of a job. The top bolt on mine required an Allen key to get it removed. Didn't give me much leverage, but managed to crack it open. Then started the engine after putting everything back together and discovered I'd not tightened the belt enough so had to struggle getting the adjuster bolts undone from the bonnet 🤬. Think it's been a success overall. Will see when I take it for a ride tomorrow. 🤞🏻😆

Did this taking the front bumper off..seemed to be quite accessable. Took the thermostat out to change it and now cant get a new one in without leaking..any ideas?

@aaanton11

4 жыл бұрын

is the thermostat leaking or the water pump ? Thanks for the great comments👍🏻👍🏻🛠

@davidclark714

4 жыл бұрын

@@aaanton11 The thermostat is leaking and I have torqued the bolts up to the correct setting which Is apparently 9 nm. The new thermostoat seal is clearly thinner than the old one and leaks badly. I have put the old thermostat and seal back in and managed to reduce the leak to a drip. however to get this reduction, I have had to overtighten the bolts.

@davidclark714

4 жыл бұрын

I have now sorted the leak...needed to ensure that the thermostat was properly centralised in the housing...also ground back the housing surface and metal collet to create a greater distance to compress the seal...great vids btw..thanks

@aaanton11

4 жыл бұрын

great job well done 👍🏻🛠

Merci merci

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

U save me and my daughters££££s thanks

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Could you do this job with ramps instead of a jack?

@aaanton11

3 жыл бұрын

Ideally the wheel needs to be removed, Thanks for the great comments👍🏻👍🏻🛠

Hi How many km should we changed water pump ? your advice

@aaanton11

3 жыл бұрын

they can last forever, no set distance, Thanks for the great comments👍🏻👍🏻🛠

Hello sir can you tell me where is the brake oil reservoir on this car?

@aaanton11

4 жыл бұрын

I show it in this video, kzread.info/dash/bejne/nGqa1KOSj726lrA.html Thanks for the great comments👍🏻👍🏻🛠

I hope the front brakes are next on your to do list 😅

@aaanton11

2 жыл бұрын

Lol its in another follow up video, Thanks for the great comments👍🏻👍🏻🛠

Is it easy to fit arfter market parking sensors to these cars? thanks

@aaanton11

3 жыл бұрын

Not too bad, but do you need them these cars are so easy to park😂, Thanks for the great comments👍🏻👍🏻🛠

@kraigjackson5245

3 жыл бұрын

@@aaanton11 Thanks for getting back to me.. I've always had them see and wasn't sure if I would miss them 😂 I don't know much about cars either so might give it to a garage as it involved electrical work as well with fuse board?

Could you do a valve seal replacement video please?

@aaanton11

8 ай бұрын

I will, if I ever come across one that needs doing they are so reliable and don’t really wear out that often, Thanks for the great comments👍🏻👍🏻🛠

I got a squealing fan belt, it's been tightened twice already, 1 by arnold Clark and again by local kwikfit. Any advice on how to stop it for good?

@aaanton11

4 жыл бұрын

Change the belt, but I would suspect the water pump is also worn, thanks for the great comments 👍🏻👍🏻🛠

No axle stand ?????? brave man !!!!

@aaanton11

2 жыл бұрын

The jack has a built in axle stand, Thanks for the great comments👍🏻👍🏻🛠

You could drain the system first, but what's the fun in that.??

@aaanton11

4 жыл бұрын

I always think you stand a chance of breaking something else, so just remove the bare minimum, Thanks for the great comments👍🏻👍🏻🛠

il y a une vis de purge dessous la pompe pour vider le liquide de refroidissement avant démontage.

@aaanton11

14 күн бұрын

Thanks for the great information👍🏻👍🏻🛠

Bonjour Monsieur je vous remercie pour vos vidéos, même que je ne suis pas anglophone, mais j’arrive à comprendre par vos gestes . Svp j’ai une Citroën C1 , et je veux purger le liquide de refroidissement ( Radiateur) , mais malheureusement je n’arrive pas à trouver les valves et durite. Pourrez-vous m’aider svp? Par une vidéo, je vous remercie par avance. Cordialement.

@aaanton11

4 жыл бұрын

merci la meilleure façon de vidanger le liquide de refroidissement est de déconnecter le tuyau de radiateur inférieur, ou si son contenu antigel que vous souhaitez améliorer, regardez cette vidéo, kzread.info/dash/bejne/Z3yay9OaYMrcmLQ.html Thanks for the great comments👍🏻👍🏻🛠

@keltoummoustefaoui8834

4 жыл бұрын

Merci bien . Et bonne continuation. Cordialement.

Hello, at 26:56, we can hear a sort of friction noise. I have a similar sound on my city bug sometimes. If anyone has an answer as to where it comes from, it would be great. Otherwise, thanks, I enjoyed the videos

@aaanton11

20 күн бұрын

All I can hear is belt noise, nothing unusual unless its louder, then it could be an worn belt, oversight belt or water pump/ alternator worn, Thanks for the great comments👍🏻👍🏻🛠

what is the mileage when water pump broken? Greetings Andy

@aaanton11

3 жыл бұрын

70000, Thanks for the great comments👍🏻👍🏻🛠

@andy464

3 жыл бұрын

@@aaanton11 My Toyota Aygo from 2009 (107000km) still original water pump. Thanks for your video. If my Aygo water pump breaks down, I know how to do it. Thank you very much

@andy464

3 жыл бұрын

@@aaanton11 maybe you can video citybug, how to replace and bleed brake fluid?

Take it easy on those bolts because the aluminium threads in the engine block strip very easily. Ask me how I know...

@aaanton11

2 жыл бұрын

ouch, steady as she goes, Thanks for the great comments👍🏻👍🏻🛠

thanks for the video, but this is very dangerous, the jack is not intended for repair under the car, it must be put on the stop or at least put a solid object under the car. the jack can go down and there will be trouble. observe safety precautions.

@aaanton11

Жыл бұрын

This jack has a built in axle stand and cant come down until the safety is released, Thanks for the great comments👍🏻👍🏻🛠

no torque wrench?

@aaanton11

2 жыл бұрын

experience is better, Thanks for the great comments👍🏻👍🏻🛠

Why did you do work on a car with no axle stands and wheel wedges? Not being a OCD captain safety but I would never work on a vehicle only supported on a 1 tonne trolley jack because if it fails well you know what will happen.

@aaanton11

4 жыл бұрын

Thanks for the concern, I have a fantastic jack with a safety lock, and always use a axle stand if I am working under the vehicle, I don't remember going under the car on this job, but Thanks for the great comments👍🏻👍🏻🛠

To finish the job the motor must be brought to its working temperature until the electric cooling fan engages

@aaanton11

2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

Where's your axle stand

@aaanton11

Жыл бұрын

The jack I use in this video had a built in axle stand, very handy Thanks for the great comments👍🏻👍🏻🛠

That oil filter looked a bit old

@aaanton11

Жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

I literally can’t find anything to do with my C1 which doesn’t have air con

@aaanton11

Жыл бұрын

The job is easier without air con there is more room, Thanks for the great comments👍🏻👍🏻🛠

Woah Japanese people made the water pump go with the accessory belt... that's not very smart of them... the belt rips off you have to immediatly stop, otherwise your engine can break, the accessory belt is not usually an important belt except for the power generator

@aaanton11

4 жыл бұрын

I would rather have the water pump driven by the aux belt than the timing belt or chain, if the water pump fails on the aux it wont smash the valve train, Thanks for the great comments👍🏻👍🏻🛠

@crpth1

3 жыл бұрын

When the cars were easy to work on, easy to maintain, etc. The water pumps were always connected to the accessory belt, usually called "fan belt" in those days... for good reason. The same owner who neglect the maintenance to a point where the belt will break. Will have a lot less to cry about, in this case... something to think about. ;-)