Water Pump Pliers Restoration [Laser Engraving And Red Rubber Handles]
Ғылым және технология
In this restoration of the old rusty pipe wrench, I have inaugurated my new laser, in which I have applied a laser engraving on the pliers. The very old water pump pliers I had to hot bluing so that it is protected from rust in the future and the handles covered with liquid rubber. Furthermore, when restoring the old pliers, I had to drill, file, remove rust, sandblast, hot bronze and laser. I found this old hand tool in an old barn and had to have it for this restoration video.
▬ What did I do ?! ▬▬▬▬▬▬▬▬
The old water pump pliers was heavily rusted, so I sprayed with rust remover the moving part of the pliers, that was enough already fortunately to be able to open them again. After disassembly I had to remake the pivot bolt, since it could not be knocked out I had to drill it out. Afterwards I sandblasted all parts in the sandblasting cabin. To protect the pliers from rust in the future, I heated the components in the hardening furnace and cooled them in oil, this process is called hot burnishing. I covered the handles with liquid rubber to make the pliers feel better in your hand and to protect you from possible electric shocks. Finally, I laser engraved a laser engraving on the old water pump pliers with a laser machine.
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Rust remover spray, pin punch, hammer, propane torch, starter, cordless screwdriver, drill, chisel, lathe, lathe chisel, pliers, milling cutter, sandpaper, sandblasting cabinet, corundum as abrasive, file, key file, hardening furnace, forging pliers, canola oil, rubber coating, screw, ratchet, laser machine.
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
kzread.info/dron/wBnXlOxxt2MC5tZhyr2JQw.htmljoin
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_button_id=C3NBENWZT56DG
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
Пікірлер: 379
The way that you put your heart & soul into every restoration is so appreciated by us viewers!!! This was an Excellently Done piece! Love the Laser Engraving!
This video makes me think that everything has its own way in this life. Great restoration, awesome end result!!! Good luck!!!
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
With a bit of ASMR. Nice 👍
I think I just saw this plier on other one of your videos, pincers restoration. Looked better there
That's one unique and pretty awesome "pliers" thank you for the awesome restoration video
Official KZread page slogan should be "I make new one." Slap it on some T shirts. Love your videos, watched all of them so far. You're exceptionally talented at your craft! ✌❤
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🥰🤩🐢
Excelente trabajo, y aun mejor si lleva tu grabado, mis respetos a tu empeño y prolijidad en el terminado de la pieza. Saludos desde Argentina
That was brilliant 👍 love that laser etching. Great end result. Well done.
@user-zm3dp8gn5z
2 жыл бұрын
ㆍ22 ////////
@alexcorrotea9603
2 жыл бұрын
@@MuhammadHabib mredtvtv
great job.
I always called these channel lock pliers or tongue and groove pliers. I have never heard them called water pump pliers, but you Learn something new everyday.
Excelente trabajo!!!
I came across this video seeing the pliers. I have the exact same pair but are made in West Germany. Great restoration.
It was very beautiful, especially when making the handle, 👍
My daughter (7) and I love your videos! She said this is the funniest one we've watched so far and she loves the turtle!
Another great restoration. Love the expressions on the turtle's face.
That was genius with the bolt. You just changed the lives of a lot of formally frustrated people
@davidwillard7334
2 жыл бұрын
YOU !! WERE !! ENTIRELY !! FOOLED !! BY ! THE !! FAKENESS !! OF !! IT !!
i love the overall look! loons great! my favorite part is when you laser it!
@davidwillard7334
2 жыл бұрын
WITH ! A ! FAKE !! BOLT !! TOO !!
Oooo ey ey ey!!!! Finaly i had waited it) Good luck. ... and pass my hello for Yours 🐢
The Laser Engraving is truly amazing to watch. Like how you add small funny things to keep the videos entertaining.
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@davidwillard7334
2 жыл бұрын
LIKE ! THE ! FAKE !! BOLT !!.IS ! TOO !!
Тяжело находить новые темы для реставрации. Пичалька. Так Вы скоро и гвозди начнете реставрировать.😀
Very impressive
Les prises de vue sont vraiment excellentes.
The Laser Engraving is truly amazing to see and also first time see how rubble handle being made 🤩🤩
@firebladex8586
2 жыл бұрын
I just learned why those rubber handles have that nipple on the end - that was the drip at the bottom!
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@davidwillard7334
2 жыл бұрын
Along with a FAKE !! BOLT !! NOW !!
Très bon travail 👍🏻
Turtle looks amazing lol
Nice restoration. I like how you left some parts with an old finish, and the other parts updated and functional.
@ForgottenShineRestoration
2 жыл бұрын
Thank you very much! 🐢
@davidwillard7334
2 жыл бұрын
UPDATED !! FAKE !! BOLT !!
Another fascinating restoration, laser etching lovely personal touch, You never cease to amaze with your works of art. Thank You
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@jacquelinelayne7702
2 жыл бұрын
@@ForgottenShineRestoration love the face on Mr. Turtle thanks again for your awesome videos
@davidwillard7334
2 жыл бұрын
WITH !! A ! FAKE !! BOLT !!
Finally a masterpiece ❤🔥
@ForgottenShineRestoration
Жыл бұрын
🤩👍🐢
the face on the turtle got me cracking up
It’s really nice seeing a sad old tool restored to working order! Great work.
Love the tirtles face
Awesome!!
Love the video never miss one and I'm suscribed
@mikeward1913
2 жыл бұрын
Hope I get a shout out
That bolt really didn't want to leave🤣 love the laser etching too. Great work 👌
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@davidwillard7334
2 жыл бұрын
THE ! BOLT !! IS ! FAKE !! NOW !!
I love sandpipers sound
Beautiful work & restoration, looks awesome!👊
@ForgottenShineRestoration
2 жыл бұрын
Thank you! 🐢
A VBW 966 is forever
Weird, just used my set of those last night, and saw this video in my feed today. What the other guy said, think they were from a Saab
Forgotten Shine you've turned out another amazing restoration👍
@davidwillard7334
2 жыл бұрын
WITH A ! FAKE !! BOLT !!
Your brush so funny 😂 i like your brush .
@ForgottenShineRestoration
2 жыл бұрын
🐢🐢🤩
Amazing transformation!
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
Very nice, love the engraving.
@davidwillard7334
2 жыл бұрын
And THE !! FAKE !! BOLT !!!
I would like to thank you for your translation to arabic and other languages
I have 2 pairs of these VBW "Gland Nut Pliers" (That's what said on the manufacturer's box) that I was given with my issue toolkit as a Gas Fitting Apprentice in 1969. They were commonly called Gordons because up to changing to VBW brand the previous issue version was made by Gordon Tools in the UK. Apart from the red paint mostly wearing off they are still in perfect working condition after daily use and abuse for 40 years when I retired and still get used pretty regularly now.
I wouldve stopped at 0:38. Yep, thats working good enough for me 😂
rogo printing is so cool.
Excellent! A very very very good job!
@ForgottenShineRestoration
2 жыл бұрын
Thank you very much! 🐢
Your videos are one of the most amazing and calming videos I really like it (a fan from Egypt)
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
Those look identical to a set I have that came from a 1985 Saab turbo tool kit. Same writing and everything
@danielhenderson8446
Жыл бұрын
I had a 89 900 turbo with 4 doors that came with tools too. I wish I saved them.
That is amazing. Well done
@ForgottenShineRestoration
2 жыл бұрын
Thank you! 🐢
Good working
@ForgottenShineRestoration
Жыл бұрын
Thanks a lot! 🐢
I like that turtle
Genial ... Parecen Nuevas. Saludos desde Barcelona Catalonia
@ForgottenShineRestoration
Жыл бұрын
¡Muchas gracias! 🐢
Incredible, one of the best I saw, excellent channel, greatings from Argentina! Love your work.
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@davidwillard7334
2 жыл бұрын
The BOLT !! IS !! NOW !! A ! FAKE !! ONE !!
a small angle grinder with a cup brush, and after 5 minutes, the pliers would be like new
I'm like the turtleee!
@ForgottenShineRestoration
Жыл бұрын
🤩🥰🐢
Me encantó cuando aparecieron los subtítulos porque no entiendo casi nada de inglés además me encantó el vídeo♥️
Красная паста для обрезинивания рукояток просто шикарна! Не знал, что есть такие вещи! 🤷♂️😏 КЛЮЧ получился как из магазина! 😯 ЗНАЧИТ реставрация удалась на славу!
@ForgottenShineRestoration
2 жыл бұрын
Большое спасибо! 🐢
Beautiful as always :)
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
Thank you for making my day better and calmer
Nice job, looks great.🙂
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much, bro! 🐢
@davidwillard7334
2 жыл бұрын
WITH ! A FAKE !! BOLT !!
You should use this to break Walnuts
Gostei muito do resultado 👏👏👏
@ForgottenShineRestoration
2 жыл бұрын
Muito obrigado! 🐢
@davidwillard7334
2 жыл бұрын
The BOLT !! Is a FAKE !!
Esses vídeos me fazem pensar que tudo tem jeito nessa vida. 🤔
i really enjoy these videos! the content as well as the editing style is really great. although you didn’t do any welding in this video, i’d like to suggest for any future videos that have welding to maybe put a dim box overlay on the clips with bright lights? this would make your videos a lot more accessible to people with epilepsy or light sensitivity. keep up the awesome vids :)
@ForgottenShineRestoration
2 жыл бұрын
Thank you very much! 🐢
Is this a second channel from my mechanics?
how does he find all these knives, cleaves etc
I love the comedy in this video. From the funny turtle faces to the sandpaper flower
@ForgottenShineRestoration
2 жыл бұрын
Thank you very much! 🐢
Amazing work my friend! 👍👍
@ForgottenShineRestoration
2 жыл бұрын
Thank you! 🐢
I only discovered this channel a couple days ago, and can I just say how freaked out I was for a few moments the 1st time I saw a little face on the red brush thing? It wasn't even in a close up; It was just there in the background.
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🐢
Nice video mate and very good work. Keep it up. 👍😁
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
@davidwillard7334
2 жыл бұрын
FOR MAKING ! A !! FAKE ! BOLT !! TOO !!
Incroyable travail bravo
@ForgottenShineRestoration
2 жыл бұрын
merci! 🐢
@davidwillard7334
2 жыл бұрын
Like THE ! FAKE !! BOLT !! IS !! HEY !!
What a complete and utter waste of time - I loved every minute of it!! Nice job
It looks great and you did a wonderful job restoring it as well!!!! Enjoyed your video so I gave it a Thumbs Up for support
@ForgottenShineRestoration
2 жыл бұрын
Thank you very much! Nice to read from you again...🐢
@davidwillard7334
2 жыл бұрын
EVEN ! WITH ! THE !! FAKE !! BOLT !! IN !! IT !!
awesome
It's my first time watching your content but i'm liking it. Although I think the turtle was saying some things to me.
@ForgottenShineRestoration
Жыл бұрын
Thank you! 🐢
Show de bola, esse w diferenciado eu tenho um mais simples. Mais bom também
Where do you even manage to keep finding all these rusty tools? You have to have this huge treasure room of them I swear
i love the turtle face hahahaha
@ForgottenShineRestoration
2 жыл бұрын
🤣🐢
where can i find the red rubber coating,what brand.?
Hammer, auch wenn es ne Rohrzange ist. Red Turtle ❤️😂
@ForgottenShineRestoration
2 жыл бұрын
Vielen Dank! 🤣🤣🐢
I’m an subscriber and I’m like your videos and could post more videos please
@ForgottenShineRestoration
2 жыл бұрын
🤩🤩🐢
Awesome vid man! Stunning as always you're a master at restoration, huge respect, thanks for adding more sandblasting since the last time I requested you to :), keep up the great work man, see you on the next video, huge fan!
@ForgottenShineRestoration
2 жыл бұрын
Thanks very much! 🐢
Why you didn't treat the bolt same way with the pliers?
@libertylibertylibertyliber1520
Жыл бұрын
Because he made a huge hole in it??
you must be dutch , as far as i know we are the only ones calling it a water pomp tang .
Tolle Arbeit und tolle Neuigkeiten wie die Anwendung vom Laser und guckende Schildkröte👀😄🐢. Alles super ! Bravo👏🏽👏🏽👏🏽 🍻
@ForgottenShineRestoration
2 жыл бұрын
Herzlichen Dank 😊🐢
Bonjour, il s'agit plutôt d'une pince multiprise, pince que les plombiers affectionnent, beau travail de restauration...
Высшая лига! Привет из Беларуси! 🇧🇾
looks like an older Knipex
한국인이신가요? 외국분이신가요? 영어를 너무 잘 하시는것 같아서..
Where do you find all of this rusty stuff?
Nice work, but the title of the video is misleading in Swedish. It says “Restaurering av rörtång” but “rörtång” is Swedish for pipe wrench (a Swedish invention by the way). But what you restored is a “polygrip”, a tongue-and-groove plier (or adjustable plier).
Thee heating will destroy the heat treatment of the pliers
I doubt that the players could have looked that good when they were brand new!
The turtle has a face lol🤣🤣🤣😂😂😂
@delorean_time
2 жыл бұрын
Хахахахаха! 😁
Good
I have just discovered your channel and I like watching your videos. I have a question : what happens to the tools you restore ? Do you keep them ? Sell them ?
@ForgottenShineRestoration
2 жыл бұрын
I keep them.. 🐢
Back when they were common and used for tools, I HATED the things. They ALWAYS would slip, pinching skin on the palm of the hand and leaving a huge blood-blister. You won't find many today because they were thrown so far away. Now that the old biter is restored nice and pretty (nice work BTW) cut the POS in 10 pieces, melt the chunks down and cast a lawn ornament from it. Perhaps a peaceful, harmless garden gnome.
@claire8011
2 жыл бұрын
This comment deserves more likes. I agree!
@garageliving3658
8 ай бұрын
These are knipex brand and have built in handle stop to keep from hands from being pinched. In general I agree that the standard slipjoint pliers suck but not in this particular case.
@oddshot60
8 ай бұрын
@@garageliving3658Sorry to disparage the Knipex pliers. The other ones were especially fiendish in that they would always wait until the user was thinking "Hey they might work this time!" ...
Wow what is that rubber coating? Will the stuff left in the can harden now that it's been exposed to air or is there a way to reseal it without some sort of industrial vacuum?
@ForgottenShineRestoration
5 ай бұрын
No, only one layer had become hard, but underneath it was still liquid 🐢
Idk why but 1:26 is satysfying