Thanks. This helped alot, going to give this ago next weekend. Got a leak

Danke schön! Das war hilfreich! 👍

Even though I have the correct tools 2 screws snapped so if anyone will try this be very careful during undoing the screws holding this thing on the engine, thanks for the video

@jamiegreen7355

2 жыл бұрын

Hiya what did you do when the screw snapped inside

@G30MaxForce

2 жыл бұрын

Hi... Fist...You cry ... After, you have to bring the car to a Service! I.m sorry for you!

@jamiegreen7355

2 жыл бұрын

@@G30MaxForce crap ok thank you, can the car still be driven locally

@jamiegreen7355

2 жыл бұрын

If the other 2 come out and take the housing off would the broken screw be visible to remove

@JiMiGj1234

2 жыл бұрын

@@jamiegreen7355 hi I am really sorry for replying very late, I used a day before wd40, and Locking pliers, and also during the removing of the screw make sure nothing is blocking you when you will use Locking pliers, remove other bits which will block you to use this tool fully, don’t warm the screw meaning keep taking brakes as I am worried in the past if screw which in in the engine gets hot it might snap take your time, so everyone knows this is the best invention ever Of this tool, untold screws and situation those Locking pliers have helped me out, make it maximum tight really really tight when you lock, locked it that tight that you have to use both hands to lock I am not a car mechanic this is done by myself at home, good luck everyone

Hi What is the function of the temperature sensor, does it give a command to the electric thermostat to open. Thanks for the help.

Great video, thanks for uploading. Can I ask what year and model Corsa you have?

@G30MaxForce

3 жыл бұрын

Glad to help. It is a 2011 Corsa D face-lift model.

Thanks for the video. How much coolant will it take? I am about to replace mine, I bought 5 litres, not sure if it will be enough....

@G30MaxForce

2 жыл бұрын

Hi...you welcome. 5l is enough...it will take less...about 3l if I remember right!🙂

@brucewayne7838

Жыл бұрын

@@G30MaxForce that corsa holds 1 u.s gallon or 3.5 ltrs

Hi, super Video! Vielen Dank! Hast du an der Gummidichtung beim Einbau noch irgendeine Paste zum weiteren abdichten benutzt?

@G30MaxForce

Жыл бұрын

Hi, habe keine Paste genutzt. Nur den dichtung

@spiddi86

Жыл бұрын

@@G30MaxForce alles klar. Nochmal vielen Dank. Haben mir leider ein Loch ins thermostatsgehäuse gerissen und muss die Tage das mal tauschen. Hoffe es klappt alles

Hi, what is the correct tightening torque for the 3 screws?

@G30MaxForce

2 жыл бұрын

Idk...I just torqued them by hand with only a bit of force...not to much!

Can I also ask 1) How do you remove the pipe in your hand at 15:53 ?

@G30MaxForce

3 жыл бұрын

I think you have pry out, that small pice of plastic with a flat head screwdriver. That pull-up the pipe. It is realy easy!

nice video. How long did this last?? I bought similar from ebay and it started leaking after less than a year.

@G30MaxForce

Жыл бұрын

Thank you! Did you replaceed the gasket though? There was no leaking anymore! I sold the car last year!

@SnGrg

Жыл бұрын

@@G30MaxForce I replaced the entire coolant flange, it didn't have a gasket on the old original one and didn't have on the new one. It had a rubber seal which should have been enough if it worked originally.

@brucewayne7838

Жыл бұрын

@@SnGrg did you do up the bolts to the correct torque?

@SnGrg

Жыл бұрын

@@brucewayne7838 yes, but the one I bought from ebay leaked regardless, so I bought a genuine one from vauxhall dealers then and there fit it and hasn't leaked since.

@G30MaxForce

Жыл бұрын

Glad you fiaxed it!

hello, did you disconnect the battery before starting work?

@G30MaxForce

3 жыл бұрын

Hello... I didn't!

@evieemaya88

3 жыл бұрын

@RogueTrooper2911 well they say when working on anything electrical to disconnect.battery and unplugging falls in this lol

@G30MaxForce

3 жыл бұрын

Because. At that point I lost my Opel card... there you have the Radio code pin on it. So you have to take it to OPEL service to read that code for you! But yes... you right ✅ Battery should be remove. 🖐

Hi, please help me. I was using your guide and while replacing the coolant flange, I broke off one of the mounting screws and now the car won’t start. Could this be the reason why the car won’t start? I also disconnected all the plugs but they can’t be connected incorrectly. Also, when I turned on the ignition, there was a strange buzzing sound from the fuse box, but I tightened the screw that holds 2 negative cables and the sound stopped. I don’t know if this could have damaged or blown a fuse. Thank you and please help :/”

@G30MaxForce

4 ай бұрын

Hello, check battery, check Fuses, check starter!

@mkubamalecki2959

4 ай бұрын

@@G30MaxForce all this three things working :/

@pw5192

4 ай бұрын

Did you sort the issue ? If you did what was the problem ? Did you forget to connect one of the adapters? Did you remove the battery cables before you started the job ? If you didnt disconnect the battery cable off the battery you may have shorted something?

привет можете прислать в россию Задние амортизаторы фирмы GM

to nie pompa tylko króciec płynu chłodniczego