Wow! This is just what I needed. Thank you for sharing your experience and your templates.

@industrialfringe953

2 жыл бұрын

I’m so glad this helped! Thanks for watching!

I have been doing it the hard way for what feels like forever!! Thanks for the download!

@industrialfringe953

5 күн бұрын

You’re quite welcome! Thanks for watching!

thank you!! your videos are suuuuper helpful from all the ones I usually watch! ty your the one that help me to get the right temp on my tumblers! those I struggle with omg lol ty uncle !

Thank you sir for your clear explanation and for sharing your templates. This is exactly what I was seeking for🙏

@industrialfringe953

Жыл бұрын

I’m so glad I could help! And thanks for watching!

I love watching your video, and also thank you for the template...

@industrialfringe953

Жыл бұрын

You’re quite welcome, and thank you!

hey....thanks for posting this video, just starting out in sublimation, have done some mugs and finally synced my particular press with temp, time & pressure for the 10oz mugs i use. but my biggest issue was positioning and getting image straight, your video helped a lot, initially i thought that the centre line you printed out would transfer to mug, but noticed that on positioning ,the centre line sat proud of the mug. great idea. thanks again Tony UK

@industrialfringe953

2 жыл бұрын

I’m so glad it helped! And thanks for watching!

Thanks for the great info! Cute cup!

@industrialfringe953

7 ай бұрын

Thanks so much! And thanks for watching!

You’re my spirit animal.. that is exactly what I use my broken mugs for (and pen cups)

@industrialfringe953

2 жыл бұрын

HA! And you just wait! I have another idea for broken mugs that I’m working on. If it comes to fruition, I’ll definitely be making a video! Thanks for watching!

looks great!!!!

@industrialfringe953

2 жыл бұрын

Thank you!!!

Great tips!

@industrialfringe953

2 жыл бұрын

Thank you, Nicole!

Nice, thanks,

Thank you! Enjoyed the video!!!

@industrialfringe953

2 жыл бұрын

Absolutely! I was thinking of occasionally doing short videos on the very basics. Please let me know if there’s anything in particular you’d like to see!

@mcrescoord

2 жыл бұрын

@@industrialfringe953 I’m actually watching part one of your Photoshop elements tumbler design video. I have not done a thing in Photoshop so anything would be great & appreciated. Thank you again!

@industrialfringe953

2 жыл бұрын

Definitely check out the second video. I didn’t cover some of the basics in the first video and should have, so I took a step back at the beginning of part two. And I’ll definitely do more Photoshop Elements basics! Thanks for watching!

@mcrescoord

2 жыл бұрын

@@industrialfringe953 you’re awesome!!! Thank you!!!!

Thank you

@industrialfringe953

8 ай бұрын

You’re quite welcome! Thanks for watching!

TFS

@industrialfringe953

2 жыл бұрын

I hope you enjoy!

With this paper no curing? Do you use dtf transfer paper? If so do you use powder and oven first ?

Your videos are very helpful to this timid newbie!!! I downloaded the template, but I see a ZIP UNZIP files. The width I downloaded is only 7" wide. Could that be because I didn't unzip correctly??

Thanks for the template and video. Could you perhaps make a template for the 11oz mug too?

@industrialfringe953

Жыл бұрын

Join the Facebook group, let me know when you’ve joined (ask about the 11oz template), and I’ll make it happen!

Fabulous work

@industrialfringe953

2 жыл бұрын

Thank you, Angela!

I love your videos. Keep going. Anyways, I’m having a problem with my mugs having a little shadow right above the images. I thought maybe my heat was too high but I kept turning my heat down and the shadow keeps showing up. So, now I’m thinking I’m not letting the mug cool before I take the transfer off. Can you help my figure this out? I can send you a pic if you like. Thank you

@industrialfringe953

Жыл бұрын

My first guess would be exactly what you said, you may not be letting it cool enough before removing the image. If you’d like more ideas, feel free to join the Facebook group. There are a lot of great folks in there! Thanks for watching!

Awesome template!!! Thank you for this information! Do you have it or 11oz mugs? And on a 8.5 x 14 sublimation paper?

@industrialfringe953

Жыл бұрын

Thank you! I plan on doing a video on 11oz coffee mugs in the near future. When I do, I’ll be sure to include one! Thanks for watching!

Hi I loved your video but quick question I’m new to Submliation I was thinking of getting of circuit mug press or another heat press what heat press do you suggest for beginners 😄

@industrialfringe953

2 жыл бұрын

Ashley, there are some great videos out there on using Cricut presses. I almost bought one, but decided to stick with the Heat Press Nation Signature Series mug press. If I weren’t doing tumblers, I would have probably purchased a Cricut mug press, as I’m sure they are awesome for 11 ounce and 15 ounce mugs. And there are people that do tumblers in them. I just figured I’d stick with something that’s made to do what I want it to do. So, if tumblers in a press aren’t something you’re looking at doing, the Cricut would be great. (You could also probably resale a Cricut press easier then most presses.) If you want to sub tumblers on a Cricut, I’d just do more research on KZread first. I like the idea of being able to expand my mug press by buying attachments, so that was a big reason I got the HPN press. Whatever you do, don’t buy a cheap Amazon press for $100. Sometimes people luck out with them, but most people, me included, end up throwing them away because they break. Good luck!

@dondeawatson8828

2 жыл бұрын

@@industrialfringe953 great information. I am also new and had the same question. I purchased a sublimation oven but was thinking about the Crichton mug press for mugs.

@industrialfringe953

2 жыл бұрын

I’m not familiar with Crichton, but think the Cricut would be great for mugs. As I said before, I’d be hesitant on getting something that’s not made for tumblers if tumblers are in your future. From the videos I’ve seen, people are doing a good job of pressing tumblers in a Cricut, but it would make me nervous. My two big pieces of advice are, don’t go with a cheap Amazon press, and go with something that can also press different cylindrical objects for growth. Heat Press Nation and Pro World are both great places to look.

Hi. Sometimes the colours don't come out the same on the print as they are in the computer file. Did you have to change your colour settings first?

@industrialfringe953

Жыл бұрын

I don’t normally, but there have been a few times where I needed an exact color and it’s subbed slightly off. In that case, if I absolutely need that color to be correct, I’ll press a test mug (one that came with a broken handle!) with several variations of the color I’m looking for, adding the hex code to the sub so I can see what each color is. Or if I’ve made a tumbler in the past with that color, I’ll just go back and look to see what that exact color is! Thanks for watching

Do you happen to have an 11 0z template? I'm just starting out and I am OCD for placement! Thanks, enjoyed this video.

@industrialfringe953

4 ай бұрын

Apologies for the late response! I’ll try to do an updated video for 11oz mugs soon!

can you print or heat press on a curved shape coffee mug

@industrialfringe953

Жыл бұрын

Hey, John, it’s extremely difficult. You can cut your paper in small sections to help get the paper against the mug, but it’s difficult. I don’t mess with it because it’s not worth the time for me, especially with the energy it takes to get it wrapped just right. Thanks for watching!

@JPurontong

Жыл бұрын

@@industrialfringe953 -thanks for the reply

Hi! The template is huge… 37x20… what is the size to print it to with the cut template?

@industrialfringe953

Жыл бұрын

Print 8-1/2” x 11” and you should be all set!

@PaniniCrunch

Жыл бұрын

@@industrialfringe953 i guess i am asking what size did you set the template to before you hid it at printing? My mug measures 9.75 x 4.75 from the exact top to bottom, bottom has a curved unprintable area of about 1/2" but i still included it in that measurement. How much higher do you recommend i set the template to so the registration mark wont hit the top of the mug? maybe 5.75"? or is that too much? if it matters im using silhouette studio and it imports your templates and the registration marks HUGE.

Is there a way to sublimated on I side?

@industrialfringe953

9 ай бұрын

You know, I haven’t tried…YET! It all boils down to if they spray the inside with sub coating. And the challenge will be getting pressure in the inside. But I’d be up to that challenge! Maybe in an upcoming video!

Do you have a template for 11 oz mugs ?

@industrialfringe953

Жыл бұрын

I’ll be making a video soon that talks about 11oz mugs. When I do, I’ll share a link to my website for the template. Thanks for watching!

do you ever have issues with text blurring slightly? I put my mugs in room temperature,, solves the problem

@industrialfringe953

6 ай бұрын

As long as I let them cool for 3 or so minutes, I’m good. I have found blurring can occur if I try and take the paper off early. When you say “I put my mugs in room temperature,” I hope you don’t mean water. I say that because you have a good chance of fracturing the porcelain or ceramic and not even knowing it. The mug really should come to room temperature on its own. Thanks so much for watching!

@bobs5051

5 ай бұрын

@@industrialfringe953 I did mean water, I typically will do 100-150 mugs on-site at events (golf outings and parties) and for a while I tried not using the water but the image, mostly the text would blur as ink kept spreading. Never had a problem with mugs cracking

Hi Roy, have you ever purchased sublimation mugs from Alibaba ?

@industrialfringe953

Жыл бұрын

Hey, Brian! No, I get my mugs from Heat Press Nation. They’re usually cheaper than Alibaba and they’re great if there are issues with one being broken. Thanks for watching!

Where can i make the templates please

@industrialfringe953

Жыл бұрын

You can download them from a link in the description! Thanks for watching!

Thank you for the this video/template and laugh at the very end! 🤣

@industrialfringe953

Жыл бұрын

Thank you for watching!

Trying to learn everything your doing right there 💔

@industrialfringe953

Жыл бұрын

You got this! Thanks for watching!

Can I use this template on Canva? I don’t not have photoshop

@industrialfringe953

Жыл бұрын

I’m not overly competent with Canva, but as long as you keep the image at 100%, I don’t see why not! Thanks for watching!

Enjoyed the video. I was able to download the template, but the cut lines did not download correctly. In other words, I could not use it.

@industrialfringe953

8 ай бұрын

I went back and looked and was able to download it, so I’m not sure what happened. Maybe try again?

@GayCarnes

8 ай бұрын

I was able to download the template and cut lines again. Thank you much. I even watched the video again. I also like Heat Press Nation.