Hang in there, gonna be good when done

YES,,EVERY THING YOU SAID IS TRUE

I was having the same problem yesterday with a 2stroke 8hp, so I added a one inch chunk of rubber flooring the same width as the transom and it completely solved the water coming over the stern. According to the Suzuki manual the transom was already at the specified height of 15", but it definitely wasn't working regardless of trim.

You did better than a lot. Low for power, high for speed, but making your cav plate level with water flow (bottom of the boat). Use your jacking plate to adjust from there. Happy boating.

Glad you got it figured out. I have a 1542 side console jon boat with a 20" transom and a 2021 suzuki 30 hp with 20" shaft. Cavitation plate still sits about 2" below the bottom of the boat. I wonder if it would be worth installing a jack plate. That skiff looks fun!

@outdoorheretic8232

2 жыл бұрын

We got it, it was worth it to me! Thanks for watching!

Great video....looks good...

Great video. Very helpful.

@outdoorheretic8232

2 жыл бұрын

Thanks for watching

That is a smart man thanks learn something new 👍

@outdoorheretic8232

6 ай бұрын

Appreciate you!

He is from South Carolina, that explains the whining

17” transom needs a short shaft. For some reason short shaft ‘supposedly’ is 15” but they truly measure 17”. I always had to use a 2” spacer on top of my transom for best performance. I work on small short shaft outboards so when I rebuilt my transom, I made it 17” deep and now it’s perfect for short shaft motors.. Hope this helps somebody some day.

@outdoorheretic8232

2 ай бұрын

It does, you are correct! Wish I would have iknown that starting. Thanks for the advice!

@slacknor

2 ай бұрын

@@outdoorheretic8232 Thank you for the video, these help us all to learn together! 🙏

Had the same issue on my j14 I put a 4in jack plate and problem solved. Also hydro foil makes a big difference. I have a 20hp 4 stroke mercury on min .

@outdoorheretic8232

Жыл бұрын

Essentually did the same thing, hope you enjoy yours as I do mine!

I'm having all sorts of issues, same thing. What is your top speed? I have the Carolina Skiff 1455 DLX w/ a Honda BF 30 and top speed is only 20 mph. It's a 10x8 SS 3 blade which is way under what is recommended, and when I actually use what is recommended, I can't even plane out. Confirmed no engine issues, compression is good, runs smooth. Cavitation plate APPEARS to be where it needs to be but I'm experiencing all the issues that one would get if it was too low. PM me pls, I could really use some help here.

I like the attitude

Good video. I just tried mine and im having the same issues .20" transom and 20 shaft mercury. Hole shot is no good and water coming over the transom and only revving 4200 should be 5500

@outdoorheretic8232

11 ай бұрын

Hope you get it fixed

Okay, I'll be the buttwad. If you need to raise your 20" shaft motor by 6" to get it right, you have the wrong motor.

@outdoorheretic8232

2 жыл бұрын

LOL, you're not a buttwad...well, maybe not yet! LOL I agree, but here's the skinny, I measured the transom right, listened to all the internet experts and everything said long shaft...moral of the story, a short shaft could have worked. BUT, I found a way to keep it, make it work and engine runs great.

@Ray56z

Жыл бұрын

@@outdoorheretic8232 With the short shaft you have zero adjustability-with the long shaft you have plenty. A friend has a 17' john boat with a 17" transom, had a long shaft from when her husband built the boat for her. When she replaced the outboard recently the dealer insisted she need the short shaft 40hp Suzuki and jackplate. It's mounted so the cavitation plate is even with the hull, that's not the problem. The problem is when lowered on the lift before any passengers even board, the outboard cowling seal at the back of the outboard is even with the surface of the water. Adding fishing weight and two people it's 2-3" below the surface. There's been no leakage, she's not concerned about it, and this boat sees only freshwater so it is as it is. She has a KW on trailer for the saltwater. With your long shaft you've adjustability, could even box in your transom if need be and still have that extra adjustability.

@outdoorheretic8232

Жыл бұрын

@@Ray56z Awesome, great insight! I love the boat and motor and you’re right, good advice no doubt!

That’s nice video well fortunately I was lucky I mount nice fresh 70 hp Nissan on my 17’ sea ray whit long Shaft but after I mount to me. Luck like to low I start lucking for the right length but I can’t see anything to results my question this video show me we’re the motor supposed mount again fortunately is perfect lengths whit level thank you I worry for this problem for 3 days again thank you great video 👍

@outdoorheretic8232

2 жыл бұрын

Thanks for watching!

It`s strange that the boat companies make their boats like that when motors are pretty much standard in tail length. Even on my jon boat I had to raise the motor up 2 inchs.

Check the page of your prop you’re on the right track still may need a smaller pitch prop

@outdoorheretic8232

4 ай бұрын

Thanks TIM!

AWESOME VIDEO DUDE ✌✌✌WHAT THE BLUE FLOORING IN YOUR BOAT???? ALSO WHATS THE NEXT VIDEO OF YOU PUTTIN IN THE JACKPLATE??? IM LOOKING FOR IT??? 🤙🤙🤙

@outdoorheretic8232

Жыл бұрын

I believe the blue decking is "Tru-dek tiles", thanks for the encouragment!

@mauritobias8759

Жыл бұрын

@@outdoorheretic8232 Kool beans dude 🤙🤙🤙I found it ✌✌✌ diggin the videos 👍👍

What about adding a whale tail that might help you get up on plane better too

@outdoorheretic8232

Жыл бұрын

You are right! Done it

Do you have a fallow up to the fix? I am having the same issue. Sorta..

@outdoorheretic8232

Жыл бұрын

I do, should be very next video!

*anti-ventilation plate* On most boats you're right though, you need the AV plate level with the hull, usually +/- 1" there are certain hull designs that will change that though, and the more setback you have, the higher you can make it. I have a 17' boat with a tiller Yamaha 40, 8" set back and mine is like 3/4" higher than the hull....every boat is different

This happened to me today

@outdoorheretic8232

28 күн бұрын

Hope you get it set

@roderickhagan9040

28 күн бұрын

@outdoorheretic8232 yes I had got a jack plate headed to the water right now

👍🏻

anti-ventilation plate

Texas Rullz :D

is theres two different long shaft motors ones 20” ones 25” which one did you get? Ask because your transom you say is 17” but yet motor is around 6” to low and your motor looks long as in way to long most ( salt water type boats) not all have a 25” transom why theres a 25” shaft motor. but even at 17” you still probably need a short shaft really depends on the hull design my jon boat has a 16” transom runs out perfect with a short shaft and i raised it-a inch to put cap plate just above hull bottom so transom is more or less 17” same as yours a true long shaft transom is 21” also to consider is lower unit size a 50hp is much bigger then a 25hp whats your boat rated for if its rated for a much bigger motor and you slap on a smaller one can cause problems with motor height even tho both are same shaft length and with cap plate you want it equal to the bottom or just above never below

@outdoorheretic8232

2 жыл бұрын

I needed a short shaft you are spot on, but if you look it up, even boat place said long. Jack plate works great!

Being resistant to the laws of physics is dumb dude. The weight in the front of the boat will greatly improve your performance. You can’t outsmart the laws of physics. Nice engine though.

@rodhurst5831

Жыл бұрын

I’m with you, not sure why he doesn’t want weight in the front. I’ve got a heavy 14’ with a short 25 Yamaha. I took the time and effort to distribute my weight ( two gas tanks, big deep cycle battery, trolling motor) up front and it works great. My cav plate is 21/4” lower than the boat bottom. I did just buy a CMC pt 35 off amazon. Took a chance on a return because it was affordable ( brand new is not! ) but the deal was to good, the hydraulic cylinder was no good that’s why it was returned, Amazon just resold the crap to me so no power tilt/trim for me.

Does he know what a heretic even is?

@outdoorheretic8232

Жыл бұрын

Quite aware, thanks for commenting!

@kwsfilms618

Жыл бұрын

@@outdoorheretic8232 so your opinion on boats goes against everyone else's?

@outdoorheretic8232

Жыл бұрын

@@kwsfilms618 not exactly what I was trying to promote there or with the title…appreciate your comments and watching