Title edit : Read this before buying injora motora

Have you thought about using the 50T with a different ESC?

@King-Bob-on-the-Rocks

Жыл бұрын

Jep, actuality I can imagine that another esc can handle it. Now I have the hw1080 inside and it's so much better. But the 50t I didn't try again

@KetaCreek

Жыл бұрын

@@King-Bob-on-the-Rocks Have you made any videos for your hw 1080? I just took a look at it on amazon and it looks awesome! I’m considering buying one.

@King-Bob-on-the-Rocks

Жыл бұрын

@@KetaCreek Just about how it drives

@King-Bob-on-the-Rocks

Жыл бұрын

@@KetaCreek Something Special u need to know? Its a good idea for the next video

@KetaCreek

Жыл бұрын

@@King-Bob-on-the-Rocks can the HW 1080 be installed in line with the axial receiver/ESC like the Furitek lizard, can?

i had the red one in my gladiator and is very loud,i change the spur gear mesh 3 times and again the same noise,i did something wrong or it is so loud?

@King-Bob-on-the-Rocks

11 ай бұрын

This is funny, one Rig Runs is quiet and the other is noisy. Maybe its because of the ESC. Both are the Red injora t66.

@mpampis_o_fou2027

11 ай бұрын

@@King-Bob-on-the-Rocks so the version 2 like gladiator esc is loud with this motor?

@King-Bob-on-the-Rocks

11 ай бұрын

@@mpampis_o_fou2027 i don't know V1 and hw 1080 ist loud. Hw 1060 is absolut silent

@mpampis_o_fou2027

11 ай бұрын

@@King-Bob-on-the-Rocks can you straight plug a hw 1060 or 1080 on a scx24 or trx4m,plug and play or you need connectors?of course you need a new rc transmitter set!

@King-Bob-on-the-Rocks

11 ай бұрын

@@mpampis_o_fou2027 scx24 V1 ESC works. V1 has bec of 5v and hw has 6v but it works. But the risk is Up to you. No conector U Just need space for this big ESC.

These Suck and are loud and have hardly no power. I use the makerfire 50 66t they are both quiet, fast, and have low torque, plus they are 10 bucks on Amazon. Try em you won't be sorry, i promise. I've tried every motor injora makes. Hear how loud that thin is? It's very annoying. I had one with the makerfire 50 66t and one with the injora 50 55t and the injora was so loud i couldn't use it and had to use a makerfire in both Now they are both quiet, fast, and have mad torque. 😠

@King-Bob-on-the-Rocks

Жыл бұрын

Sounds good, do you have a Link where U bought it? May i will try it.

@LuisChavez-lf1gf

9 ай бұрын

Yea i just installed a makerfire 66T. I did a good dry break in of the motor so the brushes seated nice and good. This motor has great low end control and good amount of torque. I like to slow crawl and im not the type to just slap the biggest tires. I can do way more with my 1.0 hyraxes.

The motors are just a few bucks but the 66T is best.

@King-Bob-on-the-Rocks

Жыл бұрын

Right 👍

It has more torque in bind spots so your not as jumpy and have better low throttle control, it's only spins faster because there's no load on it

@King-Bob-on-the-Rocks

10 ай бұрын

that's right. Today I know more about what you can do about it. More load can compensate for some things, with “too much” grease you can also simulate load. But it's better to fix the cause, i.e. "smooth" the starting current. Hobbywing has very good ESCs that greatly reduce stuttering.